Related
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop
I have an HTC surround. I am having a problem sliding up the lock-screen. It takes number of attempts to slide up the screen. Sometimes it results in missing the incoming call. It appears to me there is a mechanism (an observer) which negates the touch event if the phone is in pocket while the phone is locked. In my case, even when I am sliding the lock-screen up with my finger, the observer is negating the action and the lock-screen comes back from 20% slide-up. Other than that, the touch-screen is working perfectly fine.
Q:
Is it a software or hardware issue?
Is there a workaround (something like hacking into the ROM and playing with the drag sensitivity)?
Should I dump it and consider myself "done with the WP7"?
P.S.
1. I got this unlocked ATT phone from US and now using it in middle-east.
2. (Not sure but) I have heard that ATT only return the phones with monthly contract.
3. The problem started after 12 days of first use.
4. I tried hard and soft reset, with/without nodo and latest updates. But it’s still the same.
It sounds most likely like it is just an inconsistent/bad touch panel on the hardware. You could attempt to replace it yourself by purchasing another one on eBay, but I doubt that any software fix would be able to fix this behaviour. I have a Samsung Focus WP7 and this never happens, the only time the lock screen comes back down is if you lift your finger before getting to the top. So my best guess is that the touch screen just cuts out before you can get the phone unlocked. Sorry....
I have the same issue. Does anyone have a solution, please!!. I'm in another country, so I can't return it. Have to fix it!
same issue here.
Do you have anyone in the US that you could send it back through? You might also try contacting HTC directly. I believe the phone has a 1 yr warranty on it. At least that's what Asurion told me when they sent me one as a replacement for my old Tilt 2.
My Phone have same problem, i install NO-DO next install PreMango but not helped.
I have no such issue with my sourrond, with mango 7720 and speech for phone accessibility turn on you only have to slide less than a inch to unlock screen...
A possible answer
After some researching i found this in one of the forums of HTC
Display Not Working on the HTC Surround
Black/Blank Screen
Verify that the battery is properly installed in the device.
Attempt to power the device on by pressing and holding the power button for 3 seconds.
If the device won’t power on (also indicated by no LED’s) attempt to charge the device. If there is no response from the device when attached to a charger and power source, treat the issue as a Power/charging issue.
If the device will or is powered on:
Verify that the device is not in hibernate mode by pressing the Power Button once.
Once you have verified that the device is not in hibernate mode, attempt to navigate the device by using the Hardware buttons.
If the display is still black/blank, Soft Reset the device by powering it off and removing the battery for 10 seconds and then reinsert and Power the device back on.
If the screen is still black/blank after the Soft Reset, you will need to perform a Hard Reset.
The hard reset will remove all of the customers’ data and settings and restore the device back to the state that it was in out of the box. Once the Hard Reset is done, the customers’ settings and data CANNOT be recovered. If possible, have the customer back up their data before proceeding with the Hard Reset.
Once the Hard Reset is complete, retest the device.
If the screen is still black/blank, the device will need to be replaced/repaired.
Screen has lines
Is the customer using a custom picture or image as their wallpaper?
Return the Wallpaper settings to one of the defaults on the device by going to Start>All Applications Arrow>Settings>Lock & Wallpaper>Change wallpaper
Is the issue seen when using the default wallpaper on the device?
If so, Soft Reset the device.
If not, advise the customer that the issue is with their custom wallpaper selection and recommend that they discontinue use of it.
Does the issue remain after completing the Soft Reset?
If so, rule out recent 3rd party applications that might have affected it, by removing them
Start>All Applications Arrow>Touch and Hold on an application to be removed and select Uninstall from the Pop-up menu.
Note: Not all applications can be uninstalled from the device.
Once all recent applications have been removed, power cycle the device and retest.
Is the issue seen after removing recent 3rd party applications and performing the Soft Reset?
If so, perform a Hard Reset.
The hard reset will remove all of the customers’ data and settings and restore the device back to the state that it was in out of the box. Once the Hard Reset is done, the customers’ settings and data CANNOT be recovered. If possible, have the customer back up their data before proceeding with the Hard Reset.
Once the Hard Reset and retest the device.
If the issue remains, the device will need to be replaced/repaired.
Unresponsive Touch Screen
Note: The device comes with a Capacitive Touch screen which will not respond to light touches from anything other than the flesh of the finger. Users trying to use their fingernails or any other object should be advised that they need to use the flesh of their fingers (firmly) to navigate the Touch Screen.
Verify that the issue is with the Touch Screen and not the device freezing by attempting to navigate the device using the hardware keys.
If you can navigate the device using the Hardware buttons, continue.
If you cannot navigate the device using the Hardware buttons, this issue needs to be worked using the troubleshooting flow for Device Freeze.
Check the device for a static cling screen protector, if present, remove and retest.
If the issue remains, Soft Reset the device.
Check the device for a carrying case with a magnetic closure; some magnets can interfere with the Touch Screen responsiveness.
If using one of these cases, have the user remove the device from the case and retest.
Ensure that the Charger/Data Cable is the one intended for the device by HTC.
Use of non OEM chargers/data cables can cause your screen to become unresponsive (due to the power being allocated to charging the task, and not the screen).
HTC can only guarantee items such as chargers that have been made, made for and certified by HTC. Our chargers have been tested and passed strenuous quality and safety regulations, and it is recommended you only use HTC chargers with your phone. You must be very careful when using electrical appliances; using products that have not been tested properly or that have not been tested at all could cause your phone to malfunction, or even in extreme cases, could injure you.
If the issue is not resolved by the previous steps, move forward with the Hard Reset.
The hard reset will remove all of the customers’ data and settings and restore the device back to the state that it was in out of the box. Once the Hard Reset is done, the customers’ settings and data CANNOT be recovered. If possible, have the customer back up their data before proceeding with the Hard Reset.
Once the Hard Reset and Customization process have completed, retest the device.
If the issue remains, the device will need to be replaced/repaired.
Hope someone can give us a better answer, but this is the best at the moment
UPDATE:
People if you want to fix your Phone just put this on the serch engine of XDA Developers "To solve the problem "Screen unresponsive" or "Frozen screen" by yourself", without the brackets.
The post is from "maybeture", and he say is working, if you read the replies, many people said it work
I'll do it to tell you
Tell me If you have luck
same problem it must be that it gets unresponsive for a few seconds or even minutes after screen turns off i have to slide it sloooowwwly to get it maybe its some loose cable in there dont know but really waiting for it to be hacked to have android
Same problem here with my father's phone. I'm going to replace the screen digitizer tomorrow and see if it works... it only costs 19 bucks so its worth the try...
jo
jesusodin said:
Same problem here with my father's phone. I'm going to replace the screen digitizer tomorrow and see if it works... it only costs 19 bucks so its worth the try...
jo
Click to expand...
Click to collapse
Hi JesusOdin
I have the same issue but my question is
And all is right now?
I you have luck please tell me
Thank You
I've had similar issue with the lock screen at times. The problem is more persistant when the phone is in the pants pocket during hot weather or I am under heavy exersion. I think it may be related to the humidity. I have refrained from storing the phone in this pocket and rarely have any issue.
The phone is not weather resistant, an Otterbox might help but would be rather bulky.
was there ever a solution to this lock screen problem?
i heard it was something to do with the drivers...changing from v69 (at&t) to v63(t-mobile)
anyone know how to do this?
Well...
Tried to replace the digitizer and ended up cuting the ribbon cable of the display. I bought the screen and digitizer. Replacing the parts on this cel is not for the weak of heart.
The cel did work without problems afterwards.
I have a surround and lately its misbehaving.
The screen goes off within a second or two if I do not continue touching it. Sometimes it doesn't even stay for a second and goes off immediately. When the screen goes off, I notice the red battery light blinking. Sometimes its just in a reboot boot loop. If i am successful and able to reach videos and start a video, then the video plays fine.
Until the video is playing, the screen doesn't go off. I have tried a hard reset but it didn't help. I am on mango.
What might be the problem?
Dear all,
I've just received my N4 for a couple of hours. It's a brandnew one from U.S market.
Right after unboxing, I switched it on and signed in my Google account. Everything run just fine for a couple of minutes when i swipe through those introduction steps from a Brandnew Vanilla Android. After that, it went wild.
When i turned the screen on the 2nd time of its life time, the Lockscreen rotated automatically and then just hang there. The whole device freezed right after the screen was turned on THE 2ND TIME!. It forced me to press and hold Power button to restart the device, but that problem continues to occur on every working sessions.
Right now i have to completely turn it off and don't know how to fix yet
A just-unboxed-device with a fault like this? Life's Sucking, not Good LG!
What can i do now? Please give me some advices, i'm very frustrating right now.
Thanks in advance.
UPDATE: Now after trying to unlock bootloader, root, flash custom ROM (xenonHD), even tried to disable all lockscreen types (currently set to None), it appears that the whole device will freeze after exactly the 2nd time of screen-on! How on earth does this s**t occur????
Anyone? Please help
looking for help......
I must say this is a rare case; I've never heard of something similar before.
Email google and see what they say:
http://support.google.com/googleplay/bin/answer.py?hl=en&answer=2411741#US
They will replace all defective devices within 15 days of shipping so don't worry.
innumerabilis said:
I must say this is a rare case; I've never heard of something similar before.
Email google and see what they say:
http://support.google.com/googleplay/bin/answer.py?hl=en&answer=2411741#US
They will replace all defective devices within 15 days of shipping so don't worry.
Click to expand...
Click to collapse
Problem is the device now is in Vietnam, and it'll take much time to deliver it back to Google.
Wish someone would have a solution...
Try to get into safe mode and disable screen rotation:
Using LG Nexus 4 LG E960 Safe Mode
To recover your phone when malfunctioning.
1. Turn off your phone and reboot. When you see the booting animation press and hold the Volume Down Key . Your main screen will then be displayed with the words "Safe mode" in lower left corner.
2. From the Home screen, tap the Menu Key and tap Settings > search for disable screen rotation
Click to expand...
Click to collapse
If that doesn't work, try to reset to factory:
LG Nexus 4 hard reset LG E960
If you forgot your LG E960 unlock pattern password. Recovery solution for LG Nexus4Â Andorid phone
Using the hard reset aka factory reset on Nexus 4, resetting nexus4,
All data will be lost! Back up any important data before doing a hard reset.
Read ALL steps before attempting.
1. Turn the phone off.
2. At the same time press and hold Volume Down Key + Power/Lock Key .
3. When phone vibrates, release keys and repeatedly tap the Back Key + Home Key until the green Android Robot animation appears.
4. Your device will perform a hard reset.
If logo appears, start over from step 1.
All data will be lost!
Hard reset will take for a minute and after that your Android phone will reboot.
Click to expand...
Click to collapse
Source for steps: http://www.hard-reset.com/lg-nexus-4-hard-reset.html
innumerabilis said:
Try to get into safe mode and disable screen rotation:
If that doesn't work, try to reset to factory:
Source for steps: http://www.hard-reset.com/lg-nexus-4-hard-reset.html
Click to expand...
Click to collapse
Thank you for being so kind. I've just tried and no luck.
By somehow, if it manages to turn all the lockscreen and homescreen to landscape, it will be fine. But i know the N4 cannot rotate homescreen, so this is definitely WEIRD! I feel that the "spirit" of a tablet's OS is running inside my phone, and it decides not to run at all LOL
seems that RMA's the only choice....
Hello, suddenly my softkeys stopped working, I already tried doing a factory reset, reflash a different rom, but still no go.
What's strange is that even on landscape mode the keys dont work.
It doesn't seem to be a problem with the touch screen since the touch screen works fine as long as the soft keys aren't present.
Any help? Thnx!
Question
Salvy said:
Hello, suddenly my softkeys stopped working, I already tried doing a factory reset, reflash a different rom, but still no go.
What's strange is that even on landscape mode the keys dont work.
It doesn't seem to be a problem with the touch screen since the touch screen works fine as long as the soft keys aren't present.
Any help? Thnx!
Click to expand...
Click to collapse
Hi Salvy,
Did you flash a mod or another kernel?
It's a very common problem with the Nexus 4. I've been using paranoid android pie for 6 months to work around the issue. I can confirm that it is a hardware issue and not a software problem. A quick Google search can tell you that.
Sent from my Nexus 4 using xda app-developers app
Got the same damn problem. I would normally use a smart phone for at least 18 months but the Nexus 4 only lasted 14 months. I was hoping to use it till the Nexus 6 came out but after sending it off to be fixed, using a dumb phone for 10 days and the phone came back with the same problem, I had to go buy a Nexus 5
My soft keys work in portrait but not in landscape. I enabled the 'show touches' option in developer mode and I can see the lower 4mm of the screen isn't registering any touch. Do a quick search on Google and you'll find there are loads of people out there with the same problem. The only solution is to change the screen and I haven't seen anyone manage to get it changed under warranty . I have sent it back and expect them to fleece me off £100 for a new screen.
Disappointed with the quality of the N4 but I had no choice but to get the N5 even though it is also by LG cause once you go Vanilla, you cant go back
Sent from my Nexus 5 using xda app-developers app
Check out the guide below and hopefully you can avoid replacing your nexus 4 screen or digitiser
http://www.androidpure.com/fix-nexus-4-soft-touch-buttons-keys-working/
avismiles said:
Check out the guide below and hopefully you can avoid replacing your nexus 4 screen or digitiser
http://www.androidpure.com/fix-nexus-4-soft-touch-buttons-keys-working/
Click to expand...
Click to collapse
Ok. so I have been told by the LG service centre in Mumbai that this happens when an android update doesnt get installed properly, it definately is an android update problem according to the service centre. But since i am out of warranty by @ DAYS I have to pay Rs. 5300 for no fault of mine... ****ed up!!!
I found a solution somehwere on the internet!!
I had this problem for the last day this is the solution.
Download the application: GMD Auto Hide Soft Keys ★ root
Use it, toy with it and restart your phone. And it just works.
This worked with unrooted phones aswell, as the solution said. I don't know.
Your welcome!
cnkapadia said:
Ok. so I have been told by the LG service centre in Mumbai that this happens when an android update doesnt get installed properly, it definately is an android update problem according to the service centre. But since i am out of warranty by @ DAYS I have to pay Rs. 5300 for no fault of mine... ****ed up!!!
Click to expand...
Click to collapse
I paid Rs 4700 which includes service charge, taxes etc in addition to the cost of the screen+ digitiser. The guys at service center dont have separate screen and digitiser but just both of them as single replacement. I just hoped that they could have better service centers and support, but you cant help.
Using `wm` command on phone via ADB shell to add an blank border on screen
Salvy said:
Hello, suddenly my softkeys stopped working, I already tried doing a factory reset, reflash a different rom, but still no go.
What's strange is that even on landscape mode the keys dont work.
It doesn't seem to be a problem with the touch screen since the touch screen works fine as long as the soft keys aren't present.
Any help? Thnx!
Click to expand...
Click to collapse
I used virtual buttons for awhile, but in the end, discovered a way to do it without rooting, so long as you have the `adb` command line tool installed for development, and don't restart your phone that often:
From a command-line termal:
```
# Log into a device connected via USB.
# (Look for a tutorial on using adb, as it need some config on the phone)
adb shell
# Change the screen "overscan" using the window manager tool on the phone:
wm overscan 0,0,0,80
```
The trick is that, overscan essentially adds a buffer (black bar) on any side of the screen for positive numbers. (the screen extends "offscreen" for negative ones.) `wm --help` will show you that the accepted format of overscan is:
```
wm overscan [reset | LEFT,TOP,RIGHT,BOTTOM]
```
ie. you can either reset it to default, or set any border. In my case, I set the bottom border to 80 pixels, and that was enough to avoid the non-responsive section of the touch screen.
Of course, I assume this reset on reboot, but haven't tried yet. If it does, I'm sure someone can figure out a clever way to make it persist
Anyhow, hopefully this helps!
Found the issue and got it fixed
It worked for me. I had the same Problem and it occur when i bought new power cable. The i plugged the original blackberry micro usb cable for power up and it started working for me. Its weird but the cause of the problem is when i plugged the cheap micro USB.
Note:- this is my first update to any forum just to help people if someone has the same problem as mine.
faizalit said:
It worked for me. I had the same Problem and it occur when i bought new power cable. The i plugged the original blackberry micro usb cable for power up and it started working for me. Its weird but the cause of the problem is when i plugged the cheap micro USB.
Note:- this is my first update to any forum just to help people if someone has the same problem as mine.
Click to expand...
Click to collapse
Yes,it could be a microusb,i was in a hurry two day's ago and took one problematic microusb cable,when i put it to charge touchscreen has gone mad,it was ghost touches,slow respond,all until i turned it off,then after reboot my softkeys stopped to work,it was such for a whole day,i tried to remove batt and discharge pressing power button for 1 minute but nothing,cleared cache,uninstall app,but nothing...so i discharged it completely,took hairdryer and heated it for 45sec,and then charged overnight. In the morning soft keys worked....
This worked for me very good altought still present some softkeys bug (but just turn off the screen and turn on again and works again).
Look on google for nexus-4-navfix (gkraynov)
Appreciation
unmateria said:
This worked for me very good altought still present some softkeys bug (but just turn off the screen and turn on again and works again).
Look on google for nexus-4-navfix (gkraynov)
Click to expand...
Click to collapse
I have recently traded my NEXUS 4 and now own a Grand X Max Plus. Thank you for your help.
found solution in Chroma ROM
Hi Guys, was using CM 13 Android M, Soft keys stopped working. Tried flashed with multiple CM 13 nightly. No luck. Finally installed Chroma ROM. Over there keys are working fine.
I experienced this issue tonight and was able to fix it quickly.
Salvy said:
Hello, suddenly my softkeys stopped working, I already tried doing a factory reset, reflash a different rom, but still no go.
What's strange is that even on landscape mode the keys dont work.
It doesn't seem to be a problem with the touch screen since the touch screen works fine as long as the soft keys aren't present.
Any help? Thnx!
Click to expand...
Click to collapse
Issue:
-Softkeys not working when located on the side of the screen closest to the charging port. Softkeys would work when the screen was rotated such that the softkeys were located on the side of the screen closest to the headphone jack.
Device:
-Nexus 4 running 5.1.1
Conditions:
-Battery was 85%-90% charged
What fixed the issue:
-Plugged the phone into a USB charger. I did not use a Nexus charger; I used a random LG charger I had laying around.
-Pressed and held the power button for 30 seconds. The phone powered off after ~10 seconds. Shortly after the phone powered off, the notification light flashed red for the remainder of the 30 seconds.
-Powered the phone back on. When the phone was finished booting up, the softkeys worked again.
What didn't work:
-Restarting the phone multiple times
-Restarting into Safe Mode
-Disabling Chrome (Settings >> Apps >> Chrome >> Disable)
SCREEN IS COMPLETELY BLK. BUT STILL ABLE TO SENSE TOUCHES THO, THEY ARE COMPLETELY INVISIBLE. I DESPERATELY NEED TO KNOW WHAT ARE THE POSSIBLE ISSUES BEFORE TOTALLY SPENDING HUNDREDS TO REPLACE THE DIGITIZER /SCREEN. SO APPRECIATED
PS. HAVE ALREADY DONE ALL THE BATTERY, SIM, SD REMOVAL AND REBOOTS ETC. ALL EXCEPT WIPE THE CACHE AS IM UNABLE TO SEE THE MENU OPTIONS VIA THE BOOT MENU.