Dear all,
I've just received my N4 for a couple of hours. It's a brandnew one from U.S market.
Right after unboxing, I switched it on and signed in my Google account. Everything run just fine for a couple of minutes when i swipe through those introduction steps from a Brandnew Vanilla Android. After that, it went wild.
When i turned the screen on the 2nd time of its life time, the Lockscreen rotated automatically and then just hang there. The whole device freezed right after the screen was turned on THE 2ND TIME!. It forced me to press and hold Power button to restart the device, but that problem continues to occur on every working sessions.
Right now i have to completely turn it off and don't know how to fix yet
A just-unboxed-device with a fault like this? Life's Sucking, not Good LG!
What can i do now? Please give me some advices, i'm very frustrating right now.
Thanks in advance.
UPDATE: Now after trying to unlock bootloader, root, flash custom ROM (xenonHD), even tried to disable all lockscreen types (currently set to None), it appears that the whole device will freeze after exactly the 2nd time of screen-on! How on earth does this s**t occur????
Anyone? Please help
looking for help......
I must say this is a rare case; I've never heard of something similar before.
Email google and see what they say:
http://support.google.com/googleplay/bin/answer.py?hl=en&answer=2411741#US
They will replace all defective devices within 15 days of shipping so don't worry.
innumerabilis said:
I must say this is a rare case; I've never heard of something similar before.
Email google and see what they say:
http://support.google.com/googleplay/bin/answer.py?hl=en&answer=2411741#US
They will replace all defective devices within 15 days of shipping so don't worry.
Click to expand...
Click to collapse
Problem is the device now is in Vietnam, and it'll take much time to deliver it back to Google.
Wish someone would have a solution...
Try to get into safe mode and disable screen rotation:
Using LG Nexus 4 LG E960 Safe Mode
To recover your phone when malfunctioning.
1. Turn off your phone and reboot. When you see the booting animation press and hold the Volume Down Key . Your main screen will then be displayed with the words "Safe mode" in lower left corner.
2. From the Home screen, tap the Menu Key and tap Settings > search for disable screen rotation
Click to expand...
Click to collapse
If that doesn't work, try to reset to factory:
LG Nexus 4 hard reset LG E960
If you forgot your LG E960 unlock pattern password. Recovery solution for LG Nexus4Â Andorid phone
Using the hard reset aka factory reset on Nexus 4, resetting nexus4,
All data will be lost! Back up any important data before doing a hard reset.
Read ALL steps before attempting.
1. Turn the phone off.
2. At the same time press and hold Volume Down Key + Power/Lock Key .
3. When phone vibrates, release keys and repeatedly tap the Back Key + Home Key until the green Android Robot animation appears.
4. Your device will perform a hard reset.
If logo appears, start over from step 1.
All data will be lost!
Hard reset will take for a minute and after that your Android phone will reboot.
Click to expand...
Click to collapse
Source for steps: http://www.hard-reset.com/lg-nexus-4-hard-reset.html
innumerabilis said:
Try to get into safe mode and disable screen rotation:
If that doesn't work, try to reset to factory:
Source for steps: http://www.hard-reset.com/lg-nexus-4-hard-reset.html
Click to expand...
Click to collapse
Thank you for being so kind. I've just tried and no luck.
By somehow, if it manages to turn all the lockscreen and homescreen to landscape, it will be fine. But i know the N4 cannot rotate homescreen, so this is definitely WEIRD! I feel that the "spirit" of a tablet's OS is running inside my phone, and it decides not to run at all LOL
seems that RMA's the only choice....
Related
What the -----???
http://www.youtube.com/watch?v=w-VmhujOG4M
Is there any way to fix this?
The title of the thread threw me off, then I checked out the vid and realized you meant WIFI... Anyway, yours is the only phone that I've seen it not work on... so YOUR phone is a piece of ****, and you should call HTC and have them send you a new one.
Have you tried changing the routers wireless encryption method (WPA/WPA2). (Just a guess)
Only time it rebooted for me was when It was low on memory and I tried starting the camera app, it hung a few times then reset.
britoso said:
Have you tried changing the routers wireless encryption method (WPA/WPA2). (Just a guess)
Only time it rebooted for me was when It was low on memory and I tried starting the camera app.
Click to expand...
Click to collapse
Yes. I even tried disabling SSID broadcast for my router.
Note that it doesn't even GET to scanning for access points. It just says "Unable to start Wifi" and then reboots.
Just reflash everything. The file is floating around xda.
staulkor said:
Just reflash everything. The file is floating around xda.
Click to expand...
Click to collapse
Is this it? http://forum.xda-developers.com/showthread.php?t=614850
If so, doesn't that require rooting? Because if it does, voiding the warranty wouldn't exactly be the smartest thing to do right now...
Have you tried hard reset your Nexus One?
Please note that all data will be deleted from the Nexus One as a result of this procedure. This process does NOT delete data stored on the microSD card. We recommend backing up all of your personal data before proceeding.
1. Turn the power off. If your Nexus One is frozen, pull the battery out and reinsert it
2. Hold the Volume Down button
3. Press and release the Power button
4. You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
5. Select Clear Storage by pressing the Volume Down button
6. Press and release the Power button
7. Now simply confirm your decision: Volume Up for YES and Volume Down for NO
If you selected YES, all data including third-party applications will be deleted from the device. Once the wipe is complete, the phone will reboot to factory fresh state.
Paul22000 said:
Is this it? http://forum.xda-developers.com/showthread.php?t=614850
If so, doesn't that require rooting? Because if it does, voiding the warranty wouldn't exactly be the smartest thing to do right now...
Click to expand...
Click to collapse
I wouldn't do that. I would just send it back and get another. I wouldn't root it until you're sure it's working 100% before hand.
g2lover said:
Have you tried hard reset your Nexus One?
1. Turn the phone off. If it’s frozen in the on state, pull the battery.
2. Press and hold both the Home and Back buttons simultaneously.
3. While continuing to hold the buttons, press the Power button.
4. Release Home and Back.
5. Follow the instructions on the screen to complete the hard reset.
Click to expand...
Click to collapse
Doesn't do anything. (Are you sure that isn't for the G1? Because I don't think the buttons are active if the phone is completely off...)
Besides, I'm already doing a hard reset via Volume Down + Power (see first 15 seconds of the video).
Here's a closeup picture: http://img69.imageshack.us/img69/6025/20100115210416.jpg
I even tried Settings -> Privacy -> Factory Data Reset. Wifi still broken.
Just get it replaced by HTC, the fact that your the only one posting this issue, sounds like a 1 off problem. These things happen, just sucks when it's you.
tripplejg said:
just sucks when it's you.
Click to expand...
Click to collapse
Yes it does...
Mi|enko said:
I wouldn't do that. I would just send it back and get another. I wouldn't root it until you're sure it's working 100% before hand.
Click to expand...
Click to collapse
If it's an official signed image it will work on any Nexus One. The rooting allows unsigned images to be flashed. Signed (official) ones will always flash otherwise you'd need to root to install an OTA update, which would be insanity.
SC
Had the same problem with my phone ( got s**t scared, I thought, I would have to go through the pain of returning), i just kept rebooting................ until 5-6 boots later it just fixed itself. Now it works perfect.
ratsoda said:
Had the same problem with my phone ( got s**t scared, I thought, I would have to go through the pain of returning), i just kept rebooting................ until 5-6 boots later it just fixed itself. Now it works perfect.
Click to expand...
Click to collapse
Lucky... =\
Paul22000 said:
Doesn't do anything. (Are you sure that isn't for the G1? Because I don't think the buttons are active if the phone is completely off...)
Besides, I'm already doing a hard reset via Volume Down + Power (see first 15 seconds of the video).
Here's a closeup picture: http://img69.imageshack.us/img69/6025/20100115210416.jpg
I even tried Settings -> Privacy -> Factory Data Reset. Wifi still broken.
Click to expand...
Click to collapse
Hard setting is: on power up HOLD VOLUME DOWN + POWER, in menu select "clear storage"
kolyan said:
Hard setting is: on power up HOLD VOLUME DOWN + POWER, in menu select "clear storage"
Click to expand...
Click to collapse
Yup, that's what I was already doing in the first 15 seconds of the video. Just wanted to make sure.
This maybe a dumb question, but have you tried it on different networks, besides the one?
hurrycaine3000 said:
This maybe a dumb question, but have you tried it on different networks, besides the one?
Click to expand...
Click to collapse
I don't get the chance to try it on *any* network.
- I press to turn on Wifi.
- 5 seconds later, "Unable to start Wifi".
- 5 seconds later, freeze.
- 5 seconds later, automatic reboot.
At no point do any networks even show up.
[Edit]: I've even tried unplugging the power from my router (ie completely off).
just call HTC
Paul22000 said:
Doesn't do anything. (Are you sure that isn't for the G1? Because I don't think the buttons are active if the phone is completely off...)
Besides, I'm already doing a hard reset via Volume Down + Power (see first 15 seconds of the video).
Here's a closeup picture: http://img69.imageshack.us/img69/6025/20100115210416.jpg
I even tried Settings -> Privacy -> Factory Data Reset. Wifi still broken.
Click to expand...
Click to collapse
Your phone is definitely messed up, but just wanted to correct you. Volume down + power is NOT a hard reset. That's simply a soft reset or reboot. A hard reset is what we usually call a system wipe. You can either do that through the phone (Settings, then Privacy), or as someone suggested on bootup.
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop
So, a few days ago, I started having some problems with my stock Nexus 7 (not unlocked, no ROMs or anything like that). Some apps just wouldn't open, they would force close within a second of opening. Anyway, I think it might have stemmed from the game "Let's Golf 3", as problems started after playing that, and when going back in to it after a day of issues, a message appeared saying "Unfortunately, launcher has stopped" - it gave me the option to report or cancel, but whatever I pressed, the message popped back up. I pressed the sleep button, which seemed to turn my Nexus off somehow.
Then, when trying to to turn my Nexus back on, it just stays on the 'X' screen. I have done a factory wipe through the fastboot menu a few times, but it still stays stuck on the 'X' screen. To turn it off, I hold down the power button, but it just starts the process again automatically. The only way to actually turn the device off is through the fastboot menu.
I have seen talk of 'factory image' and drivers etc... but I am not too comfortable with that sort of thing. I know the basics of troubleshooting devices, but not much more. I am very wary of doing anything more than what the device provides me with.
Any idea how I can get my Nexus started, or am I going to have to look for a replacement?
If all else fails, then flash stock rom. If you're reluctant to do it the fastboot way, use toolkits. But it is very easy to flash a new stock rom. Go try it.
Leonhan said:
If all else fails, then flash stock rom. If you're reluctant to do it the fastboot way, use toolkits. But it is very easy to flash a new stock rom. Go try it.
Click to expand...
Click to collapse
Is that not for rooted devices?
Flashing the factory image for my N7, how do I know which version my nexus is? i.e. 4.1.2 (JZO54K) or 4.2.1 (JOP40D)?
AW: [Q] Nexus stuck on 'X' screen, even after full wipe
Gawge said:
Flashing the factory image for my N7, how do I know which version my nexus is? i.e. 4.1.2 (JZO54K) or 4.2.1 (JOP40D)?
Click to expand...
Click to collapse
Use the one you like, just choose the right one for grouper -> nakasi (wifi only) or nakasig (with simcard)
4.2.1 is the latest Android version...
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
Use the one you like, just choose the right one for grouper -> nakasi (wifi only) or nakasig (with simcard)
4.2.1 is the latest Android version...
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I too had the same problem. Tried everything. Finally gave it to ASUS service centre in Nehru Place. They will replace the mother board. May take 15 more days. So sad!
Okay, now the thing won't even turn on.
Holding the power button, and other combinations, nothing happens. No image comes up when charger is put in.
Feel like the thing is dead. Probably going to have to get it fixed or find a replacement. Don't want to spend too long without my Nexus
Gawge said:
Okay, now the thing won't even turn on.
Holding the power button, and other combinations, nothing happens. No image comes up when charger is put in.
Feel like the thing is dead. Probably going to have to get it fixed or find a replacement. Don't want to spend too long without my Nexus
Click to expand...
Click to collapse
FYI,
The tablet can "play possum" when it is in APX mode. (Which is easily entered from a cold start condiition with Vol-Up+Power) By that, I mean the device is on, but absolutely nothing ever appears on the screen. The only way to detect this is to plug it into a computer and the unknown APX device (USB Hardware Id VID_0955&PID_7330 ) will show up.
The only way to exit that mode is to hold the power button down continuously for 15-18 seconds. [size=+1]IF[/size] that happens, pressing the Vol-Down button immediately after the Google logo appears will pop you into Fastboot mode.
But, given that you have prior experience with other odd happenings on the tablet, the above hypothesis is a long shot, I'm more inclined to say "It's dead, Jim".
If everything fails let it sit for 3 hours on the charger (as long as it is not overheating or something) and try a few more things one last time before you ship it out.
bftb0 said:
FYI,
The tablet can "play possum" when it is in AVX mode. (Which is easily entered from a cold start condiition with Vol-Up+Power) By that, I mean the device is on, but absolutely nothing ever appears on the screen. The only way to detect this is to plug it into a computer and the unknown AVX device (USB Hardware Id VID_0955&PID_7330 ) will show up.
The only way to exit that mode is to hold the power button down continuously for 15-18 seconds. [size=+1]IF[/size] that happens, pressing the Vol-Down button immediately after the Google logo appears will pop you into Fastboot mode.
But, given that you have prior experience with other odd happenings on the tablet, the above hypothesis is a long shot, I'm more inclined to say "It's dead, Jim".
If everything fails let it sit for 3 hours on the charger (as long as it is not overheating or something) and try a few more things one last time before you ship it out.
Click to expand...
Click to collapse
Yeah, cheers, I have it on charge now, and i'll give it one last go.
What is the best way to fix/replace it? I bought it from Argos - will they take it back (bought back in December)?
Gawge said:
Okay, now the thing won't even turn on.
Holding the power button, and other combinations, nothing happens. No image comes up when charger is put in.
Feel like the thing is dead. Probably going to have to get it fixed or find a replacement. Don't want to spend too long without my Nexus
Click to expand...
Click to collapse
Service centre seems to be the only solution. My sympathies!
Gawge said:
Yeah, cheers, I have it on charge now, and i'll give it one last go.
What is the best way to fix/replace it? I bought it from Argos - will they take it back (bought back in December)?
Click to expand...
Click to collapse
Call Asus first. Make sure to let them know it is less than 2 months old. If they want you to perform the return through the original retailer, they will tell you. But it's best to eliminate any other middlemen if that is possible, as I suppose that the tablet ultimately goes back to Asus anyway.
(Might be different through other channels, e.g. PlayStore - I dont know).
Hi xda-members,
i´ve got an problem.
I replaced the Digitizer of my Phone and wanted to turn it oon.
Now the digitizer stays white but the touch works.
I can't see the window to type my PIN.
Can you help me to fix that problem?
sincerely lucky93
Lucky93 said:
Hi xda-members,
i´ve got an problem.
I replaced the Digitizer of my Phone and wanted to turn it oon.
Now the digitizer stays white but the touch works.
I can't see the window to type my PIN.
Can you help me to fix that problem?
sincerely lucky93
Click to expand...
Click to collapse
So far as i know is that sometimes the phone just doesn't want to accept the new display and then you gotta perform a soft reset so that old data maybe also related to the display are getting removed and that the phone Might accept the part then. In most cases this works like that hope that it works by you too. if you cant see the window to type your pin then try to find a video or a image from the lockscreen and enter your pin. Maybe you can do it if you can blind remember how it looked like:good:
wulsic said:
So far as i know is that sometimes the phone just doesn't want to accept the new display and then you gotta perform a soft reset so that old data maybe also related to the display are getting removed and that the phone Might accept the part then. In most cases this works like that hope that it works by you too. if you cant see the window to type your pin then try to find a video or a image from the lockscreen and enter your pin. Maybe you can do it if you can blind remember how it looked like:good:
Click to expand...
Click to collapse
How can i do soft reset, i got a custom rom on it.
Lucky93 said:
How can i do soft reset, i got a custom rom on it.
Click to expand...
Click to collapse
Press and hold Power Button (around 5 seconds).
Your device will now shut down and reboot.
Alternate Method; With your device turned off…
Press and hold Power Button until the LG Logo appears then release
wulsic said:
Press and hold Power Button (around 5 seconds).
Your device will now shut down and reboot.
Alternate Method; With your device turned off…
Press and hold Power Button until the LG Logo appears then release
Click to expand...
Click to collapse
I see only the white display, no lg logo or anything, thats my problem
Lucky93 said:
I see only the white display, no lg logo or anything, thats my problem
Click to expand...
Click to collapse
Yeah i know but this should be an fix which also worked on other phones so:silly: did you tryed it already? maybe multiple times. It still seems to me like a software issue.
wulsic said:
Yeah i know but this should be an fix which also worked on other phones so:silly: did you tryed it already? maybe multiple times. It still seems to me like a software issue.
Click to expand...
Click to collapse
I clicked the button for 5 seconds. It does nothing,
i have to go to TWRP Mode to do a software reset.
I tryed to fix that problem by charging my phone, Now its fully charged and the display doesnt work now.
How can i do a software reset without a working display?
Is there any method by usb and computer?
I bought a Lemfo lem7 smartwatch yday through aliexpress. During settings I switched the screen lock option and now cant unlock the screen doing whatsoever. I have rebooted by pressing the power button to no avail. Can anyone help? How can i do a factory reset as this watch has a single button?
About the same question
I got mine ordered at Banggood 2 days ago, and tested it's feature's without SIM card so far. Last test was company email configuration using exchange account setup. All worked out fine except the required pin-code unlock to start Andoid (after reboot watch).
After a while i got annoid to use the pincode input, and liked to get rid of the exchange account so i deleted this account in my LEM7.
But next reboot, i still got this pin code input screen but without onscreen keyboard !!
So the same question as topic starter, how to restore - do a factory reset with only one physical button ?
Or using the supplied smartwatch-dock with USB connection at Windows computer.
What procedure ? Software ? How to obtain factory ROM not having any backup ?
Next i will send Banggood.com service request.
thanks for any support , Hans
Yeah. Anybody knows please respind. How to do a factory reset with one physical button?
Have anybody found the solution to rsset LENFO LEM7 physically??
Go to proboards, maybe they can help http://roundandroidwatches.proboards.com/thread/2252/lemfo-lem7-discussion-thread
Hello,
I guess you have to hold the power button in booting process. So long pressing power button for 10 second to reset watch and then during booting again long pressing power button. I guess then you will see new boot menu where will be HARD RESET option. This process is more or less same for all Android devices
Good luck,
Marek
Make a reset using your Google account!
Klex Duffman said:
Make a reset using your Google account!
Click to expand...
Click to collapse
And how would this fix a device what does not start Andriod before entering 4 numbers at the same device what does not shows a keyboard to enter these numbers ?
No, neither a solution.
Meanwhile i've returned my LEM7 to supplier Banggood, got my money including shipping costs refund. And have bought a THOR4 smartwatch instead. But i would not try to enable the security setting to input a pincode anymore neither at my current THOR4 device.
Another thing, experience of the passed weeks having a 'cheap' smartwatch with all it's features including 4G , most apps running on a small and round display and very tiny onscreen keyboard are hard to use. Or not even to install when required to tap at YES / NO the yes or no is not visible on the screen neither full round or squared display setting.
Using a 2 (micro) sim card of my provider, can only use one device (watch or smartphone) at the same time. Have to set one in airplane mode to use the other as a phone .
And have you ever entered a password at onscreen keyboard on 1.34" round display ? not easy done for shure i can say !
Do consider the smartwath as a nice gadget, practically spoken prefer to use smartphone or larger display sizes .
Best regards, Hans
byzi said:
Hello,
I guess you have to hold the power button in booting process. So long pressing power button for 10 second to reset watch and then during booting again long pressing power button. I guess then you will see new boot menu where will be HARD RESET option. This process is more or less same for all Android devices
Good luck,
Marek
Click to expand...
Click to collapse
Doesn't seem to be working
gilesrm said:
Doesn't seem to be working
Click to expand...
Click to collapse
Finally succeeded. Couldn't do it from my pc but the Lemfo still had bluetooth on. I paired it with my smartphone, connected and I was able to erase all. Now the tedious reinstalling except the suspect app, whuich had been ok until the latest update. You had the right solution, thanks
I have LEM11 and my my kids forgot smart watch’s passcode and currentry I can’t login.How can I do factory hard reset?