Hello guys ..
how are you all .. ??
hope you all fine ..
today i'm gonna tell you how to convert your Xperia Z3 (L55u) unicom edition to D6633 ..
what is the benefit of doing that .. ??
after converting your l55u to d6633 you will have an international Z3 edition without any Chinese apps and easy to root ..
also you will receive OTA ..
Notes ..
1. This works only for L55U ..
2. Disable Anti-Virus ..
3. Battery should be at least 50% ..
PLEASE PROCEED AT YOUR OWN RISK
Let's Start ..
1. Download this package ..
>>>D6633 + FlashTool<<<
which contains latest D6633 FTF and Flashtool (Portable) ..
NOTE: you can download your preferred FlashTool and FTF file from anywhere you want.
2. Extract files and copy FlashTool folder to C:\ ..
3. Now go to "C:\Flashtool\drivers" and run "Flashtool-drivers.exe" and install drivers ..
4. Copy FTF file to "C:\Flashtool\firmwares" then run Flashtool.exe ..
5. Click on the Lightning mark from the left and choose Flashmode ..
6. Now you will see a new window which contains your FTF info .. don't change anything and click FLASH ..
7. Wait a few seconds before you see a new window with instructions of how to connect your device ..
8. Now turn off your phone and press Volume Down + Connect USB and wait for Flashing to start ..
9. Once Flashing is done .. disconnect your phone and power it on and have fun with your international edition of Z3 ..
>>>>>DONE<<<<<
i hope this guide is helpful for someone ..
Regards.
Any chance for something like this with the tmous version?
What are the differences between the unicom and unlocked international? Any hardware differences?
Sean
you could try with D6653 FTF ..
>>but you do that at your own risk ..
and there is no hardware differences between L55U and D6633.
Hi,
Sorry for the noob question but when do I connect the phone? I assume during step 4?
Thanks for the guide! It's just what I was looking for
twelveways1 said:
Hi,
Sorry for the noob question but when do I connect the phone? I assume during step 4?
Thanks for the guide! It's just what I was looking for
Click to expand...
Click to collapse
Read the instructions.... step 7/8
gregbradley said:
Read the instructions.... step 7/8
Click to expand...
Click to collapse
My bad....
Thanks!
Another possibly stupid question...
I am unable to download and install the drivers from the flashtool, according the the Xperia software, everything is up to date but when I use the flashtool-drivers application it just tells me it has failed and it won't let me flash it without them.
Is there something I am overlooking?
Thanks
edit:
nm, fixed. Needed to change driver permissions on windows 8
Hello everyone
I have a little question
I have a sol26 32g storage then I flashed a d6603 rom now my phone sees only 16g anyone know how to fix it back?
hey guys..
can u pls refresh the link..? it is broken..
Related
I'm looking for a .ftf file to flash to my R800i which has the baseband version .42 or .62, PC studio thingy bob doesn't work for my phone.. well it does but it has issues with half way through the update "Error has occurred" but when I flash with flashtool its fine. The only update I was able to find last time (When it was urgent) was 2.3.2 but now I want 2.3.4 or upwards and doomkernel but I cant on my current firmware build (3.0.2~)
Any links?
Thanks!
nevermind.. look here >
http://forum.xda-developers.com/showpost.php?p=18226603&postcount=2
^_^
hi I see your from colchester im from clacton ,is your bootloader unlocked and did u do it yourself iv tried a few times to unlock mine with windows xp but to no success as I havent got windows vista or 7 ,if u have the write microsoft windows to unlock will u unlock my bootloader if u can and I will pay u for unlocking it ? thanks
Hi,
i need the Generic DE Firmware for my Xperia Z5 but can't find it anywhere here in the forums or elsewhere.
Since I use Mac I can't get XperiFirm installed into Flashtool.
Can somebody either help me with a download link for the Firmware or help me with XperiFirm
Thanks in advance
DonJacob said:
Hi,
i need the Generic DE Firmware for my Xperia Z5 but can't find it anywhere here in the forums or elsewhere.
Since I use Mac I can't get XperiFirm installed into Flashtool.
Can somebody either help me with a download link for the Firmware or help me with XperiFirm
Thanks in advance
Click to expand...
Click to collapse
I can get the Customized DE firmware for the E6653, which is generic, but I can't upload the file, it's too large (2GB+)
No clue how to use a mac so can't help there.
You got somewhere for me to upload the ftf file if I create it?
Have you considered running Windows in a VM on your Mac? This is how I use XperiFirm... Parallels Desktop works great.
augie7107 said:
I can get the Customized DE firmware for the E6653, which is generic, but I can't upload the file, it's too large (2GB+)
No clue how to use a mac so can't help there.
You got somewhere for me to upload the ftf file if I create it?
Click to expand...
Click to collapse
I got a link for the german firmware unfortunately i cant post links..
But i still have a question. Whats the difference between a "Generic" and a "Customized" Firmware ?
Thanks again for all answers
DonJacob said:
I got a link for the german firmware unfortunately i cant post links..
But i still have a question. Whats the difference between a "Generic" and a "Customized" Firmware ?
Thanks again for all answers
Click to expand...
Click to collapse
I believe it's strictly down to some regional apps, not carrier based but locale based.
Here's a link to XPERIA Z5 E6653, 32.0.A.5.12 firmware for anyone still searching.
https://drive.google.com/file/d/0B1AAC4lt7nzOMVlTWmRhQl93WDg/view
Tutorial for flashing here: http://xperiafirmware.com/8-firmware/123-sony-xperia-z5-e6653
It stalled for about 5 minutes on "system.sin" but it eventually finished. Be patient and don't panic while flashing!
Archos866 said:
Here's a link to XPERIA Z5 E6653, 32.0.A.5.12 firmware for anyone still searching.
https://drive.google.com/file/d/0B1AAC4lt7nzOMVlTWmRhQl93WDg/view
Tutorial for flashing here: http://xperiafirmware.com/8-firmware/123-sony-xperia-z5-e6653
It stalled for about 5 minutes on "system.sin" but it eventually finished. Be patient and don't panic while flashing!
Click to expand...
Click to collapse
Which one is it? German? Generic EU?
Here... Generic EU
https://drive.google.com/file/d/0B1AAC4lt7nzOdVB6RFA3LTVGTnc/view?usp=sharing
Just to be sure, flashing a generic rom on a carrier one don't wipe the DRM keys ?
ninjy said:
Just to be sure, flashing a generic rom on a carrier one don't wipe the DRM keys ?
Click to expand...
Click to collapse
No, unlocking bootloader wipes DRM keys.
Thanks bro
Z5 flashtool drivers
Hi... I'm on the version 32.0.A.6.152 and I'm trying to install the version 32.0.A.6.209. I got it form Xperifirm (E6603_32.0.A.6.209_1300-4290_R4B.ftf) for My Z5 E6603.
But i don't have the flashtool driver for Z5. I already installed the flashtool xperia driver pack v1.8 but didn't works.
MTechRD said:
Hi... I'm on the version 32.0.A.6.152 and I'm trying to install the version 32.0.A.6.209. I got it form Xperifirm (E6603_32.0.A.6.209_1300-4290_R4B.ftf) for My Z5 E6603.
But i don't have the flashtool driver for Z5. I already installed the flashtool xperia driver pack v1.8 but didn't works.
Click to expand...
Click to collapse
Just a word on etiquette: the thread you're replying to has nothing to do with your problem. You should make your own thread in this case.
I believe I used the Sony drivers to make flashtool work.
MTechRD said:
Hi... I'm on the version 32.0.A.6.152 and I'm trying to install the version 32.0.A.6.209. I got it form Xperifirm (E6603_32.0.A.6.209_1300-4290_R4B.ftf) for My Z5 E6603.
But i don't have the flashtool driver for Z5. I already installed the flashtool xperia driver pack v1.8 but didn't works.
Click to expand...
Click to collapse
Hello, .209 does not support fingerprint scanner.
And about the drivers, they are located inside the flashtool folder.
Eh. Anyone have the EU generic ones?. The links are broken
Delete post!
this work on M571c from china telecom ????
zaii0007 said:
this work on M571c from china telecom ????
Click to expand...
Click to collapse
Yes can work but you need to flash A FLYME 1st then can flash CM
Mr0oHo0 said:
Yes can work but you need to flash A FLYME 1st then can flash CM
Click to expand...
Click to collapse
thanck you Brother for reply , any tuto to do this ?
zaii0007 said:
thanck you Brother for reply , any tuto to do this ?
Click to expand...
Click to collapse
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Mr0oHo0 said:
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Click to expand...
Click to collapse
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
zaii0007 said:
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
Click to expand...
Click to collapse
Q version more easy, just download A version firmware then flash over it that all.
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
imyesbest1 said:
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
Click to expand...
Click to collapse
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Mr0oHo0 said:
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Click to expand...
Click to collapse
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
imyesbest1 said:
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
Click to expand...
Click to collapse
After you flash A firmware you follow my this post everything will be fine.
Mr0oHo0 said:
Q version more easy, just download A version firmware then flash over it that all.
Click to expand...
Click to collapse
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
zaii0007 said:
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
Click to expand...
Click to collapse
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Mr0oHo0 said:
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Click to expand...
Click to collapse
i have the message "Firmware corrupt"
zaii0007 said:
i have the message "Firmware corrupt"
Click to expand...
Click to collapse
http://www.flyme.cn/firmwarelist-10.html#3 download this Version flyme 5.1.9.0A or flyme 5.1.8.0A
The flash see how, if I never guess wrong Q to A no need to do anything just download and flash
Don't work
zaii0007 said:
Don't work
Click to expand...
Click to collapse
Omgggg
Please , my honor is in PLK_L01C185 ..CAN I convert it,s model to Chinese ROM PLK_TL00C01 ???
yes, you can by rebranding your device.
venugopalu007 said:
yes, you can by rebranding your device.
Click to expand...
Click to collapse
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
TAREK XDA said:
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
Click to expand...
Click to collapse
any screen shots ? of error
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
TAREK XDA said:
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
Click to expand...
Click to collapse
Check your current state of vendor/country with
Dial *#*#2846579#*#* goto network information then vendor country info
Try it now and send me that .,,
Try it now and it send me ,, vendor country file donot exist ...
Like screenshot below ..
no, you have flash the zip provided by twrp and have to dload the official firmware of rebreanded version
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
I wish goin your facebook account to speak to you easly
TAREK XDA said:
I wish goin your facebook account to speak to you easly
Click to expand...
Click to collapse
I think you have lost the oeminfo, you should check for backup of it ,in multitool _ backup folder if it's there try to restore it. It should not have happened may be oeminfo file for PKL-TLOO which you trying to flash is problem(it is downloaded by multitool ) post the problem in multitool thread @insideout he can get it to
TAREK XDA said:
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
Click to expand...
Click to collapse
download rebrand zip provided my Huaweimultitool and flash using twrp and dload the firmware which is related to rebrand zip version
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
TAREK XDA said:
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
Click to expand...
Click to collapse
First download full stock firmware for TL-00C01 whichever version but must be full firmware not ota (should be of size 1.5gb) 2. extract the update.app file from it 3. Paste the file in mutitool/UZC folder. Follow the steps mentioned in post 519 page no 52 of mutitool thread link
https://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176/page52
Multitool will create a zip file will take 10-15min
Dear
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
TAREK XDA said:
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
Click to expand...
Click to collapse
IF u r on Android 5x then download the target firmware of 5x extract and put update file in uzc folder follow the instructions to create twrp-flashable zip file on multitool then flash it via twrp then u will be on Android 5x of TL001c after that u can upgrade to 6.0 if u want
HELLO !!! im not responsible if you kill your phone or if you modded my file i have test before send
i have add my 47.2.fsc in my firmware customised FR for flash with flashtool with no problèm just wipe data for no problèm and fresh install or uncheck partition right case but warning bootloop or cryptage security delete all data !!! I have add my new script 47.2.fsc for create your firmware with other customised
Flashtool:
http://www.flashtool.net/downloads.php
Firmware G8141 47.2.A.0.306 Customised FR: https://drive.google.com/drive/folders/1vl05ncag-da_5chbiU12Nneensyk3wjD?usp=sharing
If you Create firmware Add my script 47.2.fsc add in .flashtool/device/G81XX: warning disable auto sync at start in flashtool or his delete my file :
https://drive.google.com/file/d/1hZRpDEM9BJtT9rLSs5ho2j7PFd_vkMZ1/view?usp=drivesdk
by step :
1 open flashtool wait sync
2 disable sync
3 paste 47.2.fsc in .flashtool/device/G81XX (delete 47.1.fsc)
4 open xperifirm in flashtool dowload firmware
5 at finish close windows xperifirm and flashtool asked to add the script
6 your are happy
If you want Create Script. fsc http://www.flashtool.net/fsccreate.php
Please check Thank's buttons
Isn't this just spam at this point?
LukeyWolf said:
Isn't this just spam at this point?
Click to expand...
Click to collapse
i don't understand your question !!!
xrenoix said:
Flashtool: www.flashtool.net
Firmware G8141 47.1.A.12.34 : https://drive.google.com/open?id=1oqAdZCzU2QcoJbe8VDLImM7qQkUCw4ru
i have add 47.1.fsc in my firmware customised FR for flash with flashtool !!!
Click to expand...
Click to collapse
You have totally mislabelled the firmware and fsc.
Beetle84 said:
You have totally mislabelled the firmware and fsc.
Click to expand...
Click to collapse
you can create .fsc http://www.flashtool.net/fsccreate.php and create an firmware with flashtool if you have time and if you know how to do !
my firmware not working bro ? what the problem ?
xrenoix said:
you can create .fsc http://www.flashtool.net/fsccreate.php and create an firmware with flashtool if you have time and if you know how to do !
Click to expand...
Click to collapse
Look at the firmware number in the first post, then click your link, totally different firmware numbers
Beetle84 said:
Look at the firmware number in the first post, then click your link, totally different firmware numbers
Click to expand...
Click to collapse
sorry bro i change this just a error thank you ! I have add my new script for create other firmware and upload new firmware with new script !!! ?
Please test !!! Have nice day
xrenoix said:
sorry bro i change this just a error thank you ! I have add my new script for create other firmware and upload new firmware with new script !!!
Please test !!! Have nice day
Click to expand...
Click to collapse
So this script can be used with any 47.2 variant, or only Customized FR?
Not sure if I understood right, sorry.
Atrax2010 said:
So this script can be used with any 47.2 variant, or only Customized FR?
Not sure if I understood right, sorry.
Click to expand...
Click to collapse
yes it sure !!!!
1 open flashtool wait sync
2 disable sync
3 paste 47.2.fsc in .flashtool/device/G81XX (delete 47.1.fsc)
4 open xperifirm in flashtool dowload firmware
5 at finish close windows xperifirm and flashtool asked to add the script
6 your are happy
How to root?
Good afternoon! I own the x8 premium g8142 with unlocked bootloader. I wonder if I can upgrade to android 9 and how do I? Unfortunately that error appears in flashtool in flashmode mode. Files above 2011 .. and I do not know how to solve. Can you help me? Please
xrenoix said:
HELLO !!! im not responsible if you kill your phone or if you modded my file i have test before send
i have add my 47.2.fsc in my firmware customised FR for flash with flashtool with no problèm just wipe data for no problèm and fresh install or uncheck partition right case but warning bootloop or cryptage security delete all data !!! I have add my new script 47.2.fsc for create your firmware with other customised
Flashtool:
http://www.flashtool.net/downloads.php
Firmware G8141 47.2.A.0.306 Customised FR: https://drive.google.com/drive/folders/1vl05ncag-da_5chbiU12Nneensyk3wjD?usp=sharing
If you Create firmware Add my script 47.2.fsc add in .flashtool/device/G81XX: warning disable auto sync at start in flashtool or his delete my file :
https://drive.google.com/file/d/1hZRpDEM9BJtT9rLSs5ho2j7PFd_vkMZ1/view?usp=drivesdk
by step :
1 open flashtool wait sync
2 disable sync
3 paste 47.2.fsc in .flashtool/device/G81XX (delete 47.1.fsc)
4 open xperifirm in flashtool dowload firmware
5 at finish close windows xperifirm and flashtool asked to add the script
6 your are happy
If you want Create Script. fsc http://www.flashtool.net/fsccreate.php
Please check Thank's buttons
Click to expand...
Click to collapse
Dear this fsc script file did not work on dual sim 8142.
Let me know did i do some thing wrong.
atif_afzal said:
Dear this fsc script file did not work on dual sim 8142.
Let me know did i do some thing wrong.
Click to expand...
Click to collapse
Yes it normal bro just for G8141 only !!! It Create with my Sony xperia xz premium G8141 i dont have G8142 for create but you can Create this !!! Look here http://www.flashtool.net/fsccreate.php video is good for understand https://youtu.be/LsauwNXpR-Q
pie 9.0 update
yes , I really happy
I have followed your steps step by step and I got android 9.0.
thanks for your new script 47.2.fsc , it did it.
Do you have script for G84XX?
sam_2776 said:
How to root?
Click to expand...
Click to collapse
I too am trying to figure out how to root my device... Any word?
ı am root [email protected]