[Guide][How To] [Dual Sim]CM12 in Moto G [XT1033] - Moto G General

Do not flash CM12 if you flashed lollipop OTA.. It will hardbrick your mobile
This guide helps to install CM12 build by @anerik in Xt1033 (GPE converted)
Guys.. First Try the Medhod 3 or method 2.. It's really easy..
Unofficial CM12 Build thread: http://forum.xda-developers.com/moto-g/development/5-0-cyanogenmod-12-t2950466
Everyone including me struggling to Flash CM12 and facing many bugs including incoming call issue, No network issue etc... I followed the below steps and enjoying the power of lollipop.. follow the below steps carefully....
Note: This below steps tested myself in MotoG XT 1033 (Indian Version). I'm not responsible if you brick your mobile.. Do it at your own risk...
Method 1
Step 1: Convert your moto G in to GPE 4.4.2 (not 4.4.4).. follow the below guide to convert in to GPE
http://forum.xda-developers.com/showthread.php?t=2661022
Step 2 : Once you converted, you will get a working Single sim.. (Dont update to 4.4.4...not necessary)... copy the CM12 nightly zip and BETA-SuperSU-v2.27.zip to root of the SD card ... (No need of gapps as of now)
step 3: Boot in to bootloader by pressing power button+Volume down button.
Step 4 : Flash Custom Recovery (TWRP 2.8.1.0) using fastboot
step 5: once flashed TWRP, Reboot to recovery and backup the current ROM (in case if anything goes wrong)
step 6 : Now Wipe Dalvik cache, Cache, System and Data (Dont Wipe Internal Memory)...
step7: Now Flash the CM12 rom alone (Ignore the errors) (Dont flash Super Su as of now) (Important: Dont install Gapps) and reboot..wait for some time
step 8: Device will boot up showing 2 sim cards.... Dont panic,.. just reboot again to TWRP Recovery and flash the BETA-SuperSU-v2.27.zip without wiping anything...
Step9: Now you will see only one Sim card icon and Wait for sometimes, you will get the Network...
Step 10: Install Root Explorer or Es file explorer, add the below two lines in the build.prop (take backup of bulid.prop before editing)
ro.dual.sim.phone=false
persist.dsds.enabled=false
step 10: Once edited, save it and give the correct permissions and reboot the Phone
step11: Ignore if you see two sims-- Just open Super Su, and give yes to Update Binary. and reboot....
Voilaa... you will get the Permanant fix for the signal issues..
Step 10: Now flash the pa_gapps-micro-5.0-ALPHA1-20141117a-signed.zip
link to download Gapps : https://www.androidfilehost.com/?fid=95784891001611647
Method 2
If the above method is not working for you.. follow the below method..
Try flashing Donkey Kernel once you flashed the CM12... (No need of buld.prob edit requried in this method..)
I didnt try this method 2.. Thanks to @poran123 and he tested it and its working fine...
Donkey Kernel : https://www.androidfilehost.com/?fid=95784891001615721
Try and report....
Method 3
Flash CM12 over GPE converted XT1033
Flash BETA-SuperSU-v2.30.zip
reboot and Enjoy...
Hit Thanks If I helped you..
Thanks to Cynogenmod team, @anerik , @Habeeb Mdn (for short steps)

Screenshots

Do you possibly know of a fix for XT1031?

Incoming and outgoing calls work?

Thank you brother for making this guide...a nob question where to add these two lines in build prop just anywhere or in any specific part..?

jaspreet997 said:
Incoming and outgoing calls work?
Click to expand...
Click to collapse
Yes working...

shashankj150 said:
Thank you brother for making this guide...a nob question where to add these two lines in build prop just anywhere or in any specific part..?
Click to expand...
Click to collapse
Just add those two lines in the end..

update: guys for those converted their xt1033 phone to xt1032 gpe u can now flash the official gz validus lolipop rom without any error of showing up dual sim after reboot bug it is much stable than anerik and no need to add any lines
jst flash the twrp recovery and wipe data cache system dalcik cache and
flash validus lolipop rom from here http://forum.xda-developers.com/moto-g/orig-development/rom-gzroms-validus-13-t2864662
and after that flash the donkey kang lolipop kernel from here http://forum.xda-developers.com/moto-g/orig-development/kernel-donkey-kang-kernel-v1-t2933761
at last flash superuser beta and u r good to go yes hit that hit that thanks button if u enjoyed the lolipop

Dark_bolt88 said:
update: guys for those converted theri phone to xt1032 gpe u can now flash the official gz validus lolipop rom without any error of showing up dual sim after reboot bug it is much stable than anerik and no need to add any lines
jst flash the twrp recovery and wipe data cache system dalcik cache and
flash validus lolipop rom from here http://forum.xda-developers.com/moto-g/orig-development/rom-gzroms-validus-13-t2864662
and after that flash the donkey kang lolipop kernel from here http://forum.xda-developers.com/moto-g/orig-development/kernel-donkey-kang-kernel-v1-t2933761
at last flash superuser beta and u r good to go yes hit that hit that thanks button if u enjoyed the lolipop
Click to expand...
Click to collapse
Please don't confuse here... This guide is for Xt1033... Why you posting here for Xt1032.. Do post this in separate thread or post it in validus thread...

padhu1989 said:
Please don't confuse here... This guide is for Xt1033... Why you posting here for Xt1032.. Do post this in separate thread or post it in validus thread...
Click to expand...
Click to collapse
sorry if u r confused it is for xt1033 converted to gpe xt1032 users

Can anyone show me terminal page
Open terminal app and screen shot it
I want to check whether it shows
UTMS or UTMSDS
Sent from my Moto G using XDA Premium 4 mobile app

Dark_bolt88 said:
sorry if u r confused it is for xt1033 converted to gpe xt1032 users
Click to expand...
Click to collapse
This guide is only for CM12 .. Not for validus or discussion thread..

padhu1989 said:
This guide is only for CM12 .. Not for validus or discussion thread..
Click to expand...
Click to collapse
bt validus is also a cm12 rom buddy

Dark_bolt88 said:
bt validus is also a cm12 rom buddy
Click to expand...
Click to collapse
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..

padhu1989 said:
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..
Click to expand...
Click to collapse
ok as u wish

padhu1989 said:
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..
Click to expand...
Click to collapse
Will I be able to get back to Kitkat, if I dont like Lollipop rom(As its not stable yet)

$lim $hady said:
Will I be able to get back to Kitkat, if I dont like Lollipop rom(As its not stable yet)
Click to expand...
Click to collapse
Yes you can..

Thanks for guide, looks good
One question: I am already on Anerik's CM12 using GAPPS and just saw your thread. I don't have root access now. Is it possible for me to just flash su file now and get the sim working?

help please
link you gave for the guide to convert to gpe have not working link of 4.4.2 firmware

OP please dont mind i'm just trying to help others...
Those who have tried this trick posted at OP and didnt work... try Donkey kernel your problem will be solved

Related

[GUIDE][XT1033] How to Run GPE ROM With Single SIM Working [KOT49H][Dual Sim Moto G]

Hi Guys, like many of you I have been searching all over the forum on how to get the GPE Rom working on our dual sim variant of the Moto G. Most of us can do away with a single sim and seldom use the second one. After experimenting with the NON-HLOS.bin and fsg.mbn, I found out that the GPE rom doesn't work even if we retain the fsg or modem from the Asia-Retail dual sim roms. So here goes the guide on how to make the GPE rom work with a single sim on the XT1033. You'll need to have adb and fastboot installed or download the minimal adb and extract the contents to the rom folder.
1) Flash complete stock 4.4.2 Retail-GB or (MIRROR- Thanks aqcohen) rom. You'll have a working single sim. (You can use the attached Retail_GB.bat. Copy it over to the extracted folder and run it.)
2) Download and extract The GPE or (GPE MIRROR- Thanks aqcohen) rom.
3) Replace the GPE_XT1032_KOT49H.M004_CFC.bat with GPE_XT1033_KOT49H.M004_CFC.bat (attached) and run it.
4) You should now have the GPE rom with a single sim working.
P.S. This should work with other AOSP based roms like CM which are built for XT1032. Also you can try flashing 'only' the baseband (fsg.mbn) and modem (NON-HLOS.bin) of Retail-GB firmware and see if primary sim works on CM roms.
To flash specific partitions, edit the batch file accordingly.
Press THANKS if worked.
I did confuse with
1) Flash complete stock 4.4.2 Retail-GB rom. You'll have a working single sim. (You can use the attached Retail_GB.bat. Copy it over to the extracted folder and run it.)
if "You'll have a working single sim." then it's finish step ? sorry to ask
thestory101 said:
I did confuse with
1) Flash complete stock 4.4.2 Retail-GB rom. You'll have a working single sim. (You can use the attached Retail_GB.bat. Copy it over to the extracted folder and run it.)
if "You'll have a working single sim." then it's finish step ? sorry to ask
Click to expand...
Click to collapse
No. By that I meant you'll have the stock Retail-GB rom with single sim functionality.
How to work with two sim?
Enviado de meu XT1033 usando Tapatalk
CosmoDroid said:
1) Flash complete stock 4.4.2 Retail-GB rom. You'll have a working single sim. (You can use the attached Retail_GB.bat. Copy it over to the extracted folder and run it.)
2) Download and extract The GPE rom.
3) Replace the GPE_XT1032_KOT49H.M004_CFC.bat with GPE_XT1033_KOT49H.M004_CFC.bat (attached) and run it.
4) You should now have the GPE rom with a single sim working.
...
Click to expand...
Click to collapse
Is it possible to just flash the GB modem instead of flashing the whole ROM just to get the single sim ril to work with our DS ril?
Will I loose any of my data during dis process??
N is root required for doing it ??
Sry i 'm a newbie ...
piyush solanki said:
Will I loose any of my data during dis process??
N is root required for doing it ??
Sry i 'm a newbie ...
Click to expand...
Click to collapse
Yes and yes
Edit: root is not required but you bootloader needs to be unlocked.
On Moto G XT1033
djscopesofm said:
Is it possible to just flash the GB modem instead of flashing the whole ROM just to get the single sim ril to work with our DS ril?
Click to expand...
Click to collapse
It should work.
anyone tried?
anyone tried? Did it work? Please Tell Fast
/how to flash aosp
can we flash aosp romsfrom recovery after flashing this?
devil_kc89 said:
can we flash aosp romsfrom recovery after flashing this?
Click to expand...
Click to collapse
For AOSP roms try this.
Flash Retail-GB firmware (or only the modem and baseband.)
Flash Custom Recovery.
Flash XT1032 AOSP Based rom like CM.
tried
CosmoDroid said:
For AOSP roms try this.
Flash Retail-GB firmware (or only the modem and baseband.)
Flash Custom Recovery.
Flash XT1032 AOSP Based rom like CM.
Click to expand...
Click to collapse
I flashed the GB firmware, flashed gpe ROM_ but not able to get any network, and only one Sim was visible
devil_kc89 said:
I flashed the GB firmware, flashed gpe ROM_ but not able to get any network, and only one Sim was visible
Click to expand...
Click to collapse
Only one sim should be working. Did you flash the GPE rom using the batch file attached?? Or else you must have flashed the GPE baseband and modem too. You have to use the Retail-GB NON-HLOS.bin and fsg.mbn to get network. Flash according to the OP.
Nope.... Followed instructions in op.... I downloaded n tried with Brazilian single Sim rom also... Not working
Sent from my XT1033 using xda app-developers app
yippeeee.fot it working....was flashing both roms with same bat file...now its working fine...wil try aosp rom n let u know
let me try...
---------- Post added at 04:33 PM ---------- Previous post was at 04:06 PM ----------
Great!!!
It have worked with Paranoid.
Flashing the stock 4.4.2 Retail-GB rom and after if, flashing paranoid made it work with 1 sim on my xt1033...
devil_kc89 said:
yippeeee.fot it working....was flashing both roms with same bat file...now its working fine...wil try aosp rom n let u know
Click to expand...
Click to collapse
As I said, you have to follow every step of the OP.
CSanches said:
let me try...
---------- Post added at 04:33 PM ---------- Previous post was at 04:06 PM ----------
Great!!!
It have worked with Paranoid.
Flashing the stock 4.4.2 Retail-GB rom and after if, flashing paranoid made it work with 1 sim on my xt1033...
Click to expand...
Click to collapse
Yep. Thought so. Thanks for reporting.
Thanks for reporting guys! I will also be trying this very soon. I'm probably going to be moving to GPE ROM.
On Moto G XT1033
Won't work!
Hey there!
I've already tried and tested flashing Retail.GB modem/radio over AOSP ROMs like CarbonROM, LiquidSmoothROM, and it doesn't work.
ParanoidAndroid does work on XT1033 [Single Sim] by flashing the extra file mentioned in the thread (here) but flashing the same file on other AOSP ROMs dosen't help (the same call not hanging up problem persists).
From what I understand, Doublepranks has ported CM for XT1033 (here) and its the only AOSP ROM which works with single-sim enabled.
I assume it won't be hard to merge AOSP based ROMs with Doublepranks's sources, but I suppose I'll wait until the official CM includes support for XT1033 (as mentioned on CM wiki -- read here).
That is, until a more elegant solution comes along. Fingers crossed! :fingers-crossed:
Edit: By doesn't work, I meant to say partially doesn't work. Internet works just fine, but calling is buggy [can't hang-up the call/Can't receive calls].
Edit: PA is also AOSP. So that makes it 2 AOSP ROM which work with XT1033.
Mycroft-Dev said:
Hey there!
I've already tried and tested flashing Retail.GB modem/radio over AOSP ROMs like CarbonROM, LiquidSmoothROM, and it doesn't work.
ParanoidAndroid does work on XT1033 [Single Sim] by flashing the extra file mentioned in the thread (here) but flashing the same file on other AOSP ROMs dosen't help (the same call not hanging up problem persists).
From what I understand, Doublepranks has ported CM for XT1033 (here) and its the only AOSP ROM which works with single-sim enabled.
I assume it won't be hard to merge AOSP based ROMs with Doublepranks's sources, but I suppose I'll wait until the official CM includes support for XT1033 (as mentioned on CM wiki -- read here).
That is, until a more elegant solution comes along. Fingers crossed! :fingers-crossed:
Edit: By doesn't work, I meant to say partially doesn't work. Internet works just fine, but calling is buggy [can't hang-up the call/Can't receive calls].
Click to expand...
Click to collapse
GPE rom works fine. No issues with the primary sim. It's my daily driver now. Don't know about other AOSP based roms.

[XT1032][LINK ADDED][OTA][DEODEXED][TWRP] Moto G PURE STOCK ROM!!!

MOTO G
PURE STOCK ROM
DEODEXED VERSION
[XT1032]
AS SOME OF YOU HAVE REQUESTED ME FOR CWM ZIP OF STOCK ROM
FOR XT1032, SO HERE IS STOCK ROM FOR XT1031!!!!!!!!!!!!!
FEATURES :
OTA support
Stock rom
**Deodexed
Zipaligned
*Removed Some google apps to reduce size.
RECOMMENDED RECOVERY :
TWRP RECOVERY
OR
CWM PHILZ RECOVERY
INSTRUCTIONS :
FOR FLASHING ROM:
TWRP METHOD
1) Download the rom from the above link.
2) Put it into Internal SD.
3) Boot into recovery
4) Wipe cache , dalvik cache ,system , data.
5) Flash MGXT1032DV1.zip
6) Swipe to Yes for AUTO ROOT Feature
7) REBOOT.
8) ENJOY.
FOR FLASHING ROM:
CWM PHILZ METHOD
1) Download the rom from the above link.
2) Put it into Internal SD.
3) Boot into recovery
4) Wipe cache , dalvik cache ,system , data.
5) Flash MGXT1032DV1.zip
6) Flash Supersuv1.94.zip
7) REBOOT.
8) ENJOY.
FOR FLASHING OTA :
1) Download the OTAzip via otaupdatecenter apk
2)Go to recovery manually (TWRP)
3)Wipe Cache
4) Flash OTA zip present in Ota-updater folder
5) REBOOT
DOWNLOAD LINK :
ALTERNATIVE LINK
​
Click to expand...
Click to collapse
OTA UPDATE
MOTHER OF AD-BLOCKER [DONE]
NOTE : *If you want those moto and google apps just request in thread, I will provide you all with a cwm zip of it soon
1) The ota update can come anytime ,dont ask for eta.
Put your request here for what you extra mod you need, so I will push it through otaupdatecenter.
2)**This ROM is 95% deodexed as deodexing all apps wer giving fc
so in order to avoid that I replace some .odex files.
I DONT NEED ANY COFFEE,DONUT ,OTHER THINGS ETC ETC
,JUST HIT THANKS FOR MY WORK THATS ALL I WANT
​
Link Added, Enjoy guys!
I found it.!
Sent from my Moto G using XDA Premium 4 mobile app
Hi, I need a little help, I have a Moto G XT1032, that I bought to other person and already came with the Dark C-ROM, this method will remove it? I want the original firmware
TegMiles said:
Hi, I need a little help, I have a Moto G XT1032, that I bought to other person and already came with the Dark C-ROM, this method will remove it? I want the original firmware
Click to expand...
Click to collapse
Yes my friend, it will. It's stock firmware of international xt1032 . But make a backup first.
-Regards Sk.D
Sk.D said:
Yes my friend, it will. It's stock firmware of international xt1032 . But make a backup first.
-Regards Sk.D
Click to expand...
Click to collapse
Ok, thank you very much, I will download, backup and try, later I will report how it work.
Edit: nevermind
I flashed it and everything seems to be working fine but the Security options in Settings crash everytime is pressed. Flashed twice the Rom trying to fix that, no success.
Anyone else having this issue or anyone knows how to solve it?
Thanks.
@Sk.D please have a look into it.
Sent from my Moto G using XDA Premium 4 mobile app
please but this rom is 176.44.1 or 176.44.9?
is it eu version or other?
thanks
I was not able to get signal after flashing this rom. I used philz recovery. I was using x1033 stock rom before flashing this rom.
Sent from my Moto G
Flash Intl.fsg
Sent from my Moto G using XDA Premium 4 mobile app
Can you SK.D embed the Intl.fsg for the xt1033 who flashes this 1032?
Sent from my Moto G using XDA Premium 4 mobile app
I will be making a universal thread on android development section for all the stock roms. So user will found it with easy and can flash it without no problem.
Stay tuned
-Regards Sk.D
This is a ROM of the latest OTA update from 4.4.3?
Sent from my Moto G using XDA Premium 4 mobile app
So I didn't rooted this one. Can I still update with WiFi when new updates comes?
Can I flash it on xt1033 to convert it to xt1033.?any problem with signals?
(I don't have PC)
fifa2151 said:
Can I flash it on xt1033 to convert it to xt1033.?any problem with signals?
(I don't have PC)
Click to expand...
Click to collapse
Flash it on xt1033 ? To make it convert to xt1033? Bro this is for XT1032 and there is no problem with signal. You have to flash GB firmware and then flash this rom.
-Regards Sk.D
Is this fw 4.4.2 or 4.4.3 bro ?
Can someone make 4.4.4 zip?

No 2G/3G work on Sim 1. Please help!

Hello! I have a big problem that i cant find a solution. I opened engineered menu (*#*#4636*#*#) and from phone information i changed by mistake cellular band to usa(gsm-850/PCS-1900...) Then sim1+2 now has only LTE band working. Not 2G/ 3G. I make hard reset from stock recovery not solved the problem. Install official rom again will solve the problem? Must do root/unlock bootloader/install twrp recovery to install again the stock rom? How i can install it from stock recovery by apply update. What rom i need to install (.img/.zip)?? Please help me!
Find something here but i cant understand what to do. Also try few thing with no result
http://forum.xda-developers.com/showthread.php?t=1514319
http://forum.xda-developers.com/showthread.php?t=1873561
http://forum.xda-developers.com/showthread.php?t=2078369
http://forum.xda-developers.com/showthread.php?t=1916869
Install rom didn't help others so i must do reset on radio frequencies bands?
I do have problem with signal reception even 3G and 4G as well any one know is it hardware problem or from software side ? Currently i'm using Z1 internatianal version with CM12.1-YOG4PAS3OH
likos2015 said:
Find something here but i cant understand what to do. Also try few thing with no result
http://forum.xda-developers.com/showthread.php?t=1514319
http://forum.xda-developers.com/showthread.php?t=1873561
http://forum.xda-developers.com/showthread.php?t=2078369
http://forum.xda-developers.com/showthread.php?t=1916869
Install rom didn't help others so i must do reset on radio frequencies bands?
Click to expand...
Click to collapse
Hey, i was having the same issue, just solved
i've wiped completly the device
Factory
Cache
Media
then i ussed this: https://xq55.box.com/ZUItoCM || ZUK Z1 ZUI to CM ||
to restore the cm, now the phone works fine
Sorry for my poor english
Hope it will help you.
maryankomar said:
Hey, i was having the same issue, just solved
i've wiped completly the device
Factory
Cache
Media
then i ussed this: || ZUK Z1 ZUI to CM ||
to restore the cm, now the phone works fine
Sorry for my poor english
Hope it will help you.
Click to expand...
Click to collapse
Must do root? unlock bootloader? or just install zip from stok recovery?
likos2015 said:
Must do root? unlock bootloader? or just install zip from stok recovery?
Click to expand...
Click to collapse
yep unlock and root
Can you give me the unlock boot loader link. After the boot loader unlock just we need to install via TWRP recovery ??? Could you please explain bit more..
Thanks dude...
Not trolling you but like alot of pple you need to do your homework and not expect bottle fed solutions. This should be a last resort, not a step by step course. Just saying. Learn the basics
I fixed the problem with ZUI version..I installed the clean version from QFIL tool and it's OK now...
I solve the problem after installing new rom! Just unlock bootloader install custom recovery then root the device and install the rom. Everything works ok now! Thanks!
@likos2015 which ROM you installed??
likos2015 said:
I solve the problem after installing new rom! Just unlock bootloader install custom recovery then root the device and install the rom. Everything works ok now! Thanks!
Click to expand...
Click to collapse
can you help me how to do this you i want to do also
To solve this problem you must:
1st unlock the bootloader
2nd flash a twrp recovery
3rd root the phone
4th flash another rom
For unlock bootloader, flash recovery and root phone i used the Zuk Z1 Toolkit 0.5.2 BETA that you can find it here, after all this i install through recovery the latest Cyanogen rom (YOG4PAS3OH) already rooted that you can find it here. That's the steps i followed to solve the problem but be careful i am not bring responsibility for any mistakes that may lead to damage your phone. Sorry for my bad english
Ramshu97 said:
I fixed the problem with ZUI version..I installed the clean version from QFIL tool and it's OK now...
Click to expand...
Click to collapse
CAN YOU GIVE ME LINK OF QFIL TOOL TO DOWNLOAD MY PHONE ALSO CANT WORK BOTH SIM I HAVE INSTALLED CM 12.1 NIGHTLY BUT BOTH NETWORK CANT WORK ANY ONE CAN HELP ....:crying:
likos2015 said:
To solve this problem you must:
1st unlock the bootloader
2nd flash a twrp recovery
3rd root the phone
4th flash another rom
For unlock bootloader, flash recovery and root phone i used the Zuk Z1 Toolkit 0.5.2 BETA that you can find it here, after all this i install through recovery the latest Cyanogen rom (YOG4PAS3OH) already rooted that you can find it here. That's the steps i followed to solve the problem but be careful i am not bring responsibility for any mistakes that may lead to damage your phone. Sorry for my bad english
Click to expand...
Click to collapse
Now I have install custom rom which is cm 12.1 nightly but now my phone can't taking both sim not single nor both what I do ?
mahi77444477 said:
Now I have install custom rom which is cm 12.1 nightly but now my phone can't taking both sim not single nor both what I do ?
Click to expand...
Click to collapse
Try to install ZUK Z1 ZUI to CM from here. Also dont forget to make a full wipe after install it. If problem fixed then install cm12.1
likos2015 said:
Try to install ZUK Z1 ZUI to CM from here. Also dont forget to make a full wipe after install it. If problem fixed then install cm12.1
Click to expand...
Click to collapse
Now I have installed twrp can I install this ZUI from twrp as similar I had install CM12.1?
mahi77444477 said:
Now I have installed twrp can I install this ZUI from twrp as similar I had install CM12.1?
Click to expand...
Click to collapse
Yes install it from recovery twrp as all Rom. It is a signed zip in the rar I told you. You must install only this not all the rar. The others is drivers etc...
Ok I am trying can you suggest specific one link ?
Sent from my iPhone using Tapatalk
---------- Post added at 09:41 AM ---------- Previous post was at 09:01 AM ----------
likos2015 said:
Yes install it from recovery twrp as all Rom. It is a signed zip in the rar I told you. You must install only this not all the rar. The others is drivers etc...
Click to expand...
Click to collapse
Ok I am trying can you suggest specific one link ?
Sent from my iPhone using Tapatalk
mahi77444477 said:
Ok I am trying can you suggest specific one link ?
Sent from my iPhone using Tapatalk
---------- Post added at 09:41 AM ---------- Previous post was at 09:01 AM ----------
Ok I am trying can you suggest specific one link ?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Here https://xq55.box.com/ZUItoCM
Only the zip that you will find in the rar

Downgrade ! ??

I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
rahulvikhe1 said:
I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
Click to expand...
Click to collapse
Just flash it normally
wipe system, data, cache, and dalvik. then flash it like usual.
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Benson M Kurian said:
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Click to expand...
Click to collapse
No it won't get bricked.
Just take a backup of the current ROM using recovery before flashing CM 11.
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
technocrazyboy said:
Just flash it normally
Click to expand...
Click to collapse
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
got hard bricked when flashing directly
and wasted 150 rs in service center
jatin vekariya said:
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
Click to expand...
Click to collapse
then how to flash
AXAz0r said:
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
Click to expand...
Click to collapse
can tried this method
then plz give me full tutorial
thanx
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
just follow installation procedure in this thread
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
vishal.krr said:
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
Click to expand...
Click to collapse
i tryed this method . but my phone got bricked.
rahulvikhe1 said:
i tryed this method . but my phone got bricked.
Click to expand...
Click to collapse
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
CM 11 !
vishal.krr said:
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
Click to expand...
Click to collapse
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
rahulvikhe1 said:
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
Click to expand...
Click to collapse
I'll try flashing these two and get back to you ASAP!
kk thank you
which is rom u r using . can it is good for battery saving
waiting
rahulvikhe1 said:
kk thank you
which is rom u r using . can it is good for battery saving
Click to expand...
Click to collapse
Waiting
First backup ur current rom.... download kitkat firmware file by ed300 then flash it via twrp then wipe everything then agaun flash that file after that flssh cm 11 and gapps . It will work ..

[TWRP] ZUI 3.5.243 [STABLE] [OFFICIAL] Zuk Z2 Plus [OREO] [8.0.0] [ROM]

STOCK ZUI 3.5 FOR ZUK Z2 PLUS
Chinese build
Version:8.0.0
ZUI 3.5.099 :
https://drive.google.com/file/d/1cxx-Bc2g3xdyzk2c3BCfzUNGVYv8Bs-w/view
ZUI 3.5.200 :
https://mega.nz/#!dWpBnJpL!ohLbnPnHj836ygpDfcZ7ficcJKO_Xvbpc3MVoxRsfjE
ZUI 3.5.218 :
https://drive.google.com/file/d/12B5Su__Fq5-BMeRxR_dRXlp5B9h5kQnT/view
ZUI 3.5.225 : (Twrp)
https://mega.nz/#!cscQ0bCB!5-Y0sVMMhE7dhOuyHynmKKjsaehI0K9g9Jm5WEeQjLI
ZUI 3.5.233 :
QPST:https://drive.google.com/file/d/1zjOE9uB2nhQPInR0Kqw2jUyC7fnoEkYw/view?usp=drivesdk
ZUI 3.5.243 ST :
STEPS FOR FLASHING ZUI 3.5.243 ST TWRP:
(1) Keep your Mind in working condition and make sure you are not a Pro noob.
(2)Make sure you are on TWRP 3.2.1.0
(3) Now wipe everything except internal storage,and unmount system.
(4) Flash rom
(5)Now flash Twrp 3.0.3.0
(5)Now flash gapps and magisk
(6) Now boom!! Reboot?
You are now on ZUI 3.5.243 ST
ROM- http://fmdl.ota.lenovomm.com/dls/v6...0030.1_O_ZUI_3.5.243_ST_180126_WC77C3CFD9.zip
GAPPS- https://drive.google.com/file/d/0BwCC_QZMRsaaRFVnSW1pQzJ4bDg/view
DONT ASK **** QUESTIONS THAT IT WILL BOOT OR NOT WILL IT BRICK OR LOCK BOOTLOADER, I TESTED IT MYSELF AND ITS TOTALLY SAFE . NO ENCRYPTION. AND NO INBOX SPAMS PLZ.
TRY AT UR OWN RISK
How is the rom? Did u flash it?
mmahith18 said:
How is the rom? Did u flash it?
Click to expand...
Click to collapse
Only Few flashed! Still Downloading.
Do I need to flash gapps?
mmahith18 said:
Do I need to flash gapps?
Click to expand...
Click to collapse
No
Dhinesh1999 said:
No
Click to expand...
Click to collapse
Did you tried it? Is it able to boot? Does it works?
Zholdoshbaev said:
Did you tried it? Is it able to boot? Does it works?
Click to expand...
Click to collapse
Screenshot shows its Bootable and works.. But it bricked many
Dhinesh1999 said:
Screenshot shows its Bootable and works.. Yes It works fine
Click to expand...
Click to collapse
How did you installed it?
Does it lock bootloader?
Zholdoshbaev said:
How did you installed it?
Click to expand...
Click to collapse
Twrp (Not me)
paps2k3 said:
Does it lock bootloader?
Click to expand...
Click to collapse
Probably no! (No confirmation)
People have reported it doesn't boot. Wait for a dev to release the rom guys. It'll brick your phone.
Updater process ends with error 7 for me.
Dhinesh1999 said:
Probably no! (No confirmation)
Click to expand...
Click to collapse
Gave me error 7 while trying to install on latest twrp
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
chrislixu said:
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
Click to expand...
Click to collapse
I think we should have stock recovery
Can i flash on zui 3.1.117 via stock recovery...?
Anyone reply...
This brick the phone, wait for more information
Do not flash guys. It has caused several bricks already. It doesnt flash for many, errors. It locks BL.
THIS THREAD IS IN THE WRONG PLACE. @xanthrax can you please move it to guides section?
Any update to baseband with new stock oreo? Someone please upload a screenshot of new baseband?.. ??

Categories

Resources