Database Users

[Guide][How To] [Dual Sim]CM12 in Moto G [XT1033]

Do not flash CM12 if you flashed lollipop OTA.. It will hardbrick your mobile
This guide helps to install CM12 build by @anerik in Xt1033 (GPE converted)
Guys.. First Try the Medhod 3 or method 2.. It's really easy..
Unofficial CM12 Build thread: http://forum.xda-developers.com/moto-g/development/5-0-cyanogenmod-12-t2950466
Everyone including me struggling to Flash CM12 and facing many bugs including incoming call issue, No network issue etc... I followed the below steps and enjoying the power of lollipop.. follow the below steps carefully....
Note: This below steps tested myself in MotoG XT 1033 (Indian Version). I'm not responsible if you brick your mobile.. Do it at your own risk...
Method 1
Step 1: Convert your moto G in to GPE 4.4.2 (not 4.4.4).. follow the below guide to convert in to GPE
http://forum.xda-developers.com/showthread.php?t=2661022
Step 2 : Once you converted, you will get a working Single sim.. (Dont update to 4.4.4...not necessary)... copy the CM12 nightly zip and BETA-SuperSU-v2.27.zip to root of the SD card ... (No need of gapps as of now)
step 3: Boot in to bootloader by pressing power button+Volume down button.
Step 4 : Flash Custom Recovery (TWRP 2.8.1.0) using fastboot
step 5: once flashed TWRP, Reboot to recovery and backup the current ROM (in case if anything goes wrong)
step 6 : Now Wipe Dalvik cache, Cache, System and Data (Dont Wipe Internal Memory)...
step7: Now Flash the CM12 rom alone (Ignore the errors) (Dont flash Super Su as of now) (Important: Dont install Gapps) and reboot..wait for some time
step 8: Device will boot up showing 2 sim cards.... Dont panic,.. just reboot again to TWRP Recovery and flash the BETA-SuperSU-v2.27.zip without wiping anything...
Step9: Now you will see only one Sim card icon and Wait for sometimes, you will get the Network...
Step 10: Install Root Explorer or Es file explorer, add the below two lines in the build.prop (take backup of bulid.prop before editing)
ro.dual.sim.phone=false
persist.dsds.enabled=false
step 10: Once edited, save it and give the correct permissions and reboot the Phone
step11: Ignore if you see two sims-- Just open Super Su, and give yes to Update Binary. and reboot....
Voilaa... you will get the Permanant fix for the signal issues..
Step 10: Now flash the pa_gapps-micro-5.0-ALPHA1-20141117a-signed.zip
link to download Gapps : https://www.androidfilehost.com/?fid=95784891001611647
Method 2
If the above method is not working for you.. follow the below method..
Try flashing Donkey Kernel once you flashed the CM12... (No need of buld.prob edit requried in this method..)
I didnt try this method 2.. Thanks to @poran123 and he tested it and its working fine...
Donkey Kernel : https://www.androidfilehost.com/?fid=95784891001615721
Try and report....
Method 3
Flash CM12 over GPE converted XT1033
Flash BETA-SuperSU-v2.30.zip
reboot and Enjoy...
Hit Thanks If I helped you..
Thanks to Cynogenmod team, @anerik , @Habeeb Mdn (for short steps)

Screenshots

Do you possibly know of a fix for XT1031?

Incoming and outgoing calls work?

Thank you brother for making this guide...a nob question where to add these two lines in build prop just anywhere or in any specific part..?

jaspreet997 said:
Incoming and outgoing calls work?
Click to expand...
Click to collapse
Yes working...

shashankj150 said:
Thank you brother for making this guide...a nob question where to add these two lines in build prop just anywhere or in any specific part..?
Click to expand...
Click to collapse
Just add those two lines in the end..

update: guys for those converted their xt1033 phone to xt1032 gpe u can now flash the official gz validus lolipop rom without any error of showing up dual sim after reboot bug it is much stable than anerik and no need to add any lines
jst flash the twrp recovery and wipe data cache system dalcik cache and
flash validus lolipop rom from here http://forum.xda-developers.com/moto-g/orig-development/rom-gzroms-validus-13-t2864662
and after that flash the donkey kang lolipop kernel from here http://forum.xda-developers.com/moto-g/orig-development/kernel-donkey-kang-kernel-v1-t2933761
at last flash superuser beta and u r good to go yes hit that hit that thanks button if u enjoyed the lolipop

Dark_bolt88 said:
update: guys for those converted theri phone to xt1032 gpe u can now flash the official gz validus lolipop rom without any error of showing up dual sim after reboot bug it is much stable than anerik and no need to add any lines
jst flash the twrp recovery and wipe data cache system dalcik cache and
flash validus lolipop rom from here http://forum.xda-developers.com/moto-g/orig-development/rom-gzroms-validus-13-t2864662
and after that flash the donkey kang lolipop kernel from here http://forum.xda-developers.com/moto-g/orig-development/kernel-donkey-kang-kernel-v1-t2933761
at last flash superuser beta and u r good to go yes hit that hit that thanks button if u enjoyed the lolipop
Click to expand...
Click to collapse
Please don't confuse here... This guide is for Xt1033... Why you posting here for Xt1032.. Do post this in separate thread or post it in validus thread...

padhu1989 said:
Please don't confuse here... This guide is for Xt1033... Why you posting here for Xt1032.. Do post this in separate thread or post it in validus thread...
Click to expand...
Click to collapse
sorry if u r confused it is for xt1033 converted to gpe xt1032 users

Can anyone show me terminal page
Open terminal app and screen shot it
I want to check whether it shows
UTMS or UTMSDS
Sent from my Moto G using XDA Premium 4 mobile app

Dark_bolt88 said:
sorry if u r confused it is for xt1033 converted to gpe xt1032 users
Click to expand...
Click to collapse
This guide is only for CM12 .. Not for validus or discussion thread..

padhu1989 said:
This guide is only for CM12 .. Not for validus or discussion thread..
Click to expand...
Click to collapse
bt validus is also a cm12 rom buddy

Dark_bolt88 said:
bt validus is also a cm12 rom buddy
Click to expand...
Click to collapse
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..

padhu1989 said:
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..
Click to expand...
Click to collapse
ok as u wish

padhu1989 said:
I don't want to argue anymore..this guide is only for flashing cm12 unofficial build ..
Click to expand...
Click to collapse
Will I be able to get back to Kitkat, if I dont like Lollipop rom(As its not stable yet)

$lim $hady said:
Will I be able to get back to Kitkat, if I dont like Lollipop rom(As its not stable yet)
Click to expand...
Click to collapse
Yes you can..

Thanks for guide, looks good
One question: I am already on Anerik's CM12 using GAPPS and just saw your thread. I don't have root access now. Is it possible for me to just flash su file now and get the sim working?

help please
link you gave for the guide to convert to gpe have not working link of 4.4.2 firmware

OP please dont mind i'm just trying to help others...
Those who have tried this trick posted at OP and didnt work... try Donkey kernel your problem will be solved

[5.0.1] XT1033 Brazilian Soak LP DUAL SIM [TWRP BACKUP]

I don't like long thread so in short.
Untouched Lollipop 5.0.1 TWRP backup for XT1033 users (working on Asian variant)
I hve restored the TWRP 5.0.1 backup in my XT1033 Indian variant given by Xda member @deeplyyoung and it's working fine in my phone with dual Sim compatibility
So I hve decided to share it with u guys..
Download Link:-
Google Drive (Here)
Mega (mirror Here)
Procedure:-
You need to extract this zip in the root of your SD, then replace my serial number with your phone's serial, otherwise TWRP won't find the backup! Then restore it with TWRP.
Credits:-
@deeplyyoung
First boot will take time so be patient..
It will not upgrade ur bootloader so u can revert again to Kitkat(4.4) easily .
Screenshot Added

owaisnaim said:
I don't like long thread so in short.
Lollipop 5.0.1 TWRP backup for XT1033 users (working on Asian variant)
I hve restored the TWRP 5.0.1 backup in my XT1033 Indian variant given by Xda member @deeplyyoung and it's working fine in my phone with dual Sim compatibility
So I hve decided to share it with u guys..
Download Link:-
https://drive.google.com/folderview?id=0B1HpFSoNCv4wQmRwZ0RNVEhiWWs&usp=sharing
Credits:-
@deeplyyoung
First boot will take time so be patient..
It will not upgrade ur bootloader so better don't ask it.
Click to expand...
Click to collapse
To be precisely straight i don't want to ask too much. Will this anyhow can brick my phone and can you edit op how to restore this. Coz I am with phone and can't read all the threads. Well i read somewhere you need to change your device serial number for using this backup...can I again revert back on my old 4.4.4 backup after this ???
Sent from my XT1033 using XDA Free mobile app

sachoosaini said:
To be precisely straight i don't want to ask too much. Will this anyhow can brick my phone and can you edit op how to restore this. Coz I am with phone and can't read all the threads. Well i read somewhere you need to change your device serial number for using this backup...can I again revert back on my old 4.4.4 backup after this ???
Sent from my XT1033 using XDA Free mobile app
Click to expand...
Click to collapse
First i suggest you backup your 4.4.4 on TWRP so you can always revert to it easily.
Also there will be a folder of TWRP backup created on your internal storage. So all you need is just copy backup folder inside this zip into your TWRP backup folder. Same folder with your KK backup. Then boot into TWRP and restore it from there.
Don't forget to wipe your system and data before restoring. Gudluck

owaisnaim said:
I don't like long thread so in short.
Lollipop 5.0.1 TWRP backup for XT1033 users (working on Asian variant)
Click to expand...
Click to collapse
how can i change back the font to it's original font?

It's an untouched & fresh Lollipop 5.01 TWRP backup or it contains your own stuffs like changed fonts, system settings and apps?
You need to clarify this in the OP for who is looking to flash it on their XT1033 Asian variants.

Empty folder
Sent from my Moto G using XDA Free mobile app

dokiace said:
how can i change back the font to it's original font?
Click to expand...
Click to collapse
Search playstore
Sent from my Moto G using XDA Free mobile app

Can anyone make a CWM backup?
Sent from my Moto G using Tapatalk

sidewalk_ said:
Can anyone make a CWM backup?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
You can restore this backup with CWM. I confirm this method work with philz touch recovery. On settings, check the TWRP method and un-check MD5 checksum

rizki_Alkaf said:
You can restore this backup with CWM. I confirm this method work with philz touch recovery. On settings, check the TWRP method and un-check MD5 checksum
Click to expand...
Click to collapse
I use CWM touch. Never used Philz tho...
Sent from my Moto G using Tapatalk

dokiace said:
how can i change back the font to it's original font?
Click to expand...
Click to collapse
Backup contains original font no need to change
nirmalbalaji said:
It's an untouched & fresh Lollipop 5.01 TWRP backup or it contains your own stuffs like changed fonts, system settings and apps?
You need to clarify this in the OP for who is looking to flash it on their XT1033 Asian variants.
Click to expand...
Click to collapse
It's untouched lollipop 5.0.1 TWRP backup
sachoosaini said:
Empty folder
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
LINK updated see it Again it will work..

i have brazilian lollipop installed on my device with stock recovery, is it safe for me to use this recovery. And if it's safe can i recover it using stock recovery?

owaisnaim said:
I don't like long thread so in short.
Untouched Lollipop 5.0.1 TWRP backup for XT1033 users (working on Asian variant)
I hve restored the TWRP 5.0.1 backup in my XT1033 Indian variant given by Xda member @deeplyyoung and it's working fine in my phone with dual Sim compatibility
So I hve decided to share it with u guys..
Download Link:-
https://drive.google.com/folderview?id=0B1HpFSoNCv4wZDNMbzdDM3F0dzA&usp=sharing
Procedure:-
You need to extract this zip in the root of your SD, then replace my serial number with your phone's serial, otherwise TWRP won't find the backup! Then restore it with TWRP.
Credits:-
@deeplyyoung
First boot will take time so be patient..
It will not upgrade ur bootloader so u can revert again to Kitkat(4.4) easily .
Screenshot Added
Click to expand...
Click to collapse
I did a clean restore after wiping data and all and the screen is not at all stable, ita flickering a lot.. Any solutions?

Screen flickering problem
Any work around for it??
Thanks for share though )

aj141 said:
Screen flickering problem
Any work around for it??
Thanks for share though )
Click to expand...
Click to collapse
There is no solution for it. Just lock and unlock the screen once. It will be gone.

amitkuliyal said:
i have brazilian lollipop installed on my device with stock recovery, is it safe for me to use this recovery. And if it's safe can i recover it using stock recovery?
Click to expand...
Click to collapse
If you have stock recovery, then you must be already OTA-ing to lollipop right? Why don't you just do another OTA update to 5.0.1? there's another thread with shared zip to do that. This is for us who wants to preserve kk bootloader so we can easily revert back to 4.4.4. Well, at least for me.
And i don't think you can restore this backup with stock recovery, you need a custom one

After installation .. The OS is unable to see any content on my internal sd card???
What to do?

I have a question here. I've Brazilian Android Lollipop 5.0 , rooted and philz touch recovery installed on XT1033 Asian variant. Few days back someone shared 5.0.1 update. I wanted to upgrade to 5.0.1 but it requires Brazilian Android Lollipop 5.0 unrooted with stock recovery. So I skip updating that part. So the question is will this backup will upgrade my XT1033 Asian variant which have Brazilian Android Lollipop 5.0 , rooted and have philz touch recovery installed to toBrazilian Android Lollipop 5.0.1 without messing up anything?

It doesn't work on xt1032, if anyone was wondering. It stays on bootanimation.
Sent from my XT1032 using XDA Free mobile app

aj141 said:
After installation .. The OS is unable to see any content on my internal sd card???
What to do?
Click to expand...
Click to collapse
Happened to me too i think. Its in a folder named '0' the files are not gone

Galaxy Note 3- Problems After Upgrading To 5.0

I am sure that XDA developers will not let me down
Dear guys,
I had updated my kitkat 4.4.2 to lollipop 5.0 but I faced to major problems which are:
1. My screen shoot (Screen write) function works for maybe 3 or 4 times only and then nothing happens when I get out my pen and press it, so I have to restart the device to make it work for more 3 or 4 times!!!
2. I cannot find a good way to root after upgard it to lollipop. :crying: :crying:
Model: N9005
AP: N9005XXUGBOEA
CP: N9005XXUGBOD3
CSC: N9005OJVGBOE4
I appreciate your support and thanks for your time

1) Hmm... haven't seen that problem before. Try installing some apps from the play store that allow you to screetshot.
2) How did you previously root? I rooted my LG-D415 Android Version 5.0.2 using Kingroot.
Sent from my Samsung Tab 4 7" SM-T230NU using XDA mobile app

ThaKingDerp said:
1) Hmm... haven't seen that problem before. Try installing some apps from the play store that allow you to screetshot.
2) How did you previously root? I rooted my LG-D415 Android Version 5.0.2 using Kingroot.
Sent from my Samsung Tab 4 7" SM-T230NU using XDA mobile app
Click to expand...
Click to collapse
thank your for your concern
well...
1. I will, even it makes me so sad because it was the major function of the pen.
2. previously I followed the instructions in this video youtube.com/watch?v=hUghV16l9d8

Make sure you have done a clean installation of the ROM. By clean installation I mean make a full wipe, from TWRP (a custom recovery), go to Advanced Wipe and select everything except your external SD, in case you have one installed. Then flash the latest Lollipop ROM via Odin. The latest stable LP ROM I found to be OF3, so get that from sammobile.com.
And root can't be more easy. When you are done flashing the stock ROM via Odin just place this zip on your phone, https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip, reboot to recovery, which will be TWRP (and after flashing the stock ROM you will have to reflash TWRP, cause flashing stock ROM always installs the stock recovery), and just install the zip from there, done.

ithehappy said:
Make sure you have done a clean installation of the ROM. By clean installation I mean make a full wipe, from TWRP (a custom recovery), go to Advanced Wipe and select everything except your external SD, in case you have one installed. Then flash the latest Lollipop ROM via Odin. The latest stable LP ROM I found to be OF3, so get that from sammobile.com.
And root can't be more easy. When you are done flashing the stock ROM via Odin just place this zip on your phone, https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip, reboot to recovery, which will be TWRP (and after flashing the stock ROM you will have to reflash TWRP, cause flashing stock ROM always installs the stock recovery), and just install the zip from there, done.
Click to expand...
Click to collapse
1+ Yeah, you can't get any clearer than that. Nice explanation :thumbup:
Sent from my LG-D415

ThaKingDerp said:
1+ Yeah, you can't get any clearer than that. Nice explanation :thumbup:
Sent from my LG-D415
Click to expand...
Click to collapse
OK great sir and thank you too .. but my question is how to get it?
Give me a link

You mean Odin?
Sent from my LG-D415

ThaKingDerp said:
You mean Odin?
Sent from my LG-D415
Click to expand...
Click to collapse
No I'm mean the RIM -TWRP? For the same model I have

Here is the TWRP download for your model: http://www.techerrata.com/file/twrp2/hlte/openrecovery-twrp-2.6.3.7-hlte.img.tar
Now I must be off to bed, it's 2 AM here
If you want, you can PM me and I can walk you through on how to flash, say, 14 hours from now. But good luck
Sent from my Samsung Galaxy Tab 4 7" T230-NU

ThaKingDerp said:
Here is the TWRP download for your model: Link prevented
Now I must be off to bed, it's 2 AM here
If you want, you can PM me and I can walk you through on how to flash, say, 14 hours from now. But good luck
Sent from my Samsung Galaxy Tab 4 7" T230-NU
Click to expand...
Click to collapse
Thank you very much dude, but this TWRP doesn't allow me to enter boot menu anymore and forced me to totally format the device but i appreciate your support

ThaKingDerp said:
Here is the TWRP download for your model: http://www.techerrata.com/file/twrp2/hlte/openrecovery-twrp-2.6.3.7-hlte.img.tar
Now I must be off to bed, it's 2 AM here
If you want, you can PM me and I can walk you through on how to flash, say, 14 hours from now. But good luck
Sent from my Samsung Galaxy Tab 4 7" T230-NU
Click to expand...
Click to collapse
Why did you give him the link to such an old version?
samjak said:
Thank you very much dude, but this TWRP doesn't allow me to enter boot menu anymore and forced me to totally format the device but i appreciate your support
Click to expand...
Click to collapse
https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar
Here you go.
Sent from my SM-N9005 using Tapatalk

[OTA] [XT1521] Android 5.1.1 OTA Offline Update

For those who are having downloading issues & Poor network speed, I have captured the ota update file for 4G variant aka XT1521. You can download it anywhere else & install it in your mobile offline. It's completely safe.
Download the ota file from the following link. https://www.dropbox.com/s/9yrehaovz...5.surnia_retasia_ds.retasiaall.en.03.zip?dl=1
Make sure that file name is Blur_Version.23.51.65.surnia_retasia_ds.retasiaall.en.03.zip
Copy the file to the root of your external momory (i.e ”/storage/sdcard1/”)
Make sure that you have working network connection. Goto Settings >> About Phone >> System updates.
When it shows the update, tap on ”Yes, I'm IN”
Now it will show copying update notification on your notification bar.
Once it's completes just select install update.
Your phone will automatically reboot to recovery mode & will install the update.
Note:
I have captured update on my XT1521 indian retail version. Before upgrading to 23.51.65, make sure that you are already in stock rom version 22.46.2 & stock recovery. It will fail in custom recoveries
Sent from my SM-G900H using Tapatalk

Can this be flashed using TWRP?

Can be used on XT1524 ?
22.46.8.surnia_reteu.reteuall.en.EU refr
Stock !
Thanks !

[email protected] said:
Can this be flashed using TWRP?
Click to expand...
Click to collapse
No, it must be flashed in stock rom with stock recovery.
fratellos said:
Can be used on XT1524 ?
22.46.8.surnia_reteu.reteuall.en.EU refr
Stock !
Thanks !
Click to expand...
Click to collapse
No, It's for XT1521
Sent from my SM-G900H using Tapatalk

OK ! Thanks !

ktsamy said:
No, it must be flashed in stock rom with stock recovery.
No, It's for XT1521
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Do u have a copy of stock recovery for our Indian model ..
I have backup of stock version but I don't have the backup of the recovery ..
I m in need of stock recovery can u help me..

hello...is anyone else having issue of notification bar opening up itself showing new notifications during call or is it just me? it is annoying to have it opening up sometimes .i checked and its not my cheek pulling the bar down.it just opens when notification is there during call.have to push it back up to disconnect the call.have xposed framework (v78) installed on my rooted phone with stock rom n stock kernel..any solution for this happening?

baadshahpuneet said:
hello...is anyone else having issue of notification bar opening up itself showing new notifications during call or is it just me? it is annoying to have it opening up sometimes .i checked and its not my cheek pulling the bar down.it just opens when notification is there during call.have to push it back up to disconnect the call.have xposed framework (v78) installed on my rooted phone with stock rom n stock kernel..any solution for this happening?
Click to expand...
Click to collapse
I don't have any such issues so far... [emoji2] [emoji2]
Sent from my SM-G900H using Tapatalk

Please provide stock recovery for XT1521
Sent from my MotoE2(4G-LTE) using XDA Free mobile app

Stuck in btloader !!! :crying:
Can You please get me the full flashable xt1521 5.1.1 xml.zip file ???? The file factory link provided in all other threads are not working for me !!!! it fails !!!! Can u help me by geting our indian vertion xt1521 stock full flashable 5.1.1 xml .zip !!!!!
I tried flashing XT1521_SURNIA_JAXTR_DS_5.1.1_LPI23.72-52-J-29_cid7_subsidy-DEFAULT_CFC.xml !!! it flashed successfully but again my phone is stuck in btloader !!! :crying:
Help pls !!!!
Thanks in advance !!!

Downgrade ! ??

I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....

rahulvikhe1 said:
I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
Click to expand...
Click to collapse
Just flash it normally

wipe system, data, cache, and dalvik. then flash it like usual.

Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?

Benson M Kurian said:
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Click to expand...
Click to collapse
No it won't get bricked.
Just take a backup of the current ROM using recovery before flashing CM 11.

1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.

technocrazyboy said:
Just flash it normally
Click to expand...
Click to collapse
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.

got hard bricked when flashing directly
and wasted 150 rs in service center

jatin vekariya said:
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
Click to expand...
Click to collapse
then how to flash

AXAz0r said:
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
Click to expand...
Click to collapse
can tried this method
then plz give me full tutorial
thanx

rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.

rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636

rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
just follow installation procedure in this thread
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636

vishal.krr said:
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
Click to expand...
Click to collapse
i tryed this method . but my phone got bricked.

rahulvikhe1 said:
i tryed this method . but my phone got bricked.
Click to expand...
Click to collapse
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.

CM 11 !
vishal.krr said:
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
Click to expand...
Click to collapse
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you

rahulvikhe1 said:
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
Click to expand...
Click to collapse
I'll try flashing these two and get back to you ASAP!

kk thank you
which is rom u r using . can it is good for battery saving

waiting
rahulvikhe1 said:
kk thank you
which is rom u r using . can it is good for battery saving
Click to expand...
Click to collapse
Waiting

First backup ur current rom.... download kitkat firmware file by ed300 then flash it via twrp then wipe everything then agaun flash that file after that flssh cm 11 and gapps . It will work ..