Related
I'm stucking at booting logo and can't connect my phone to pc.
I tried to install drivers from LG from http www lg com/uk/support/product/support-product-profile-mobile-redux.jsp?customerModelCode=GT540&initialTab=documents but my computer still can't recognize the phone.
I tried to go to device manager but can't find modems to disable LG Modem Driver
I tried LGMobile update through customer support -> recovery phone -> IMEI # but it's not working
I tried to use kdz to flash on 3 mode: CS, DIAG, EMERGENCY and still get this message:
[R&D Test Tools Log File]
01:14:37 : Launching SW update
01:14:37 : Unpacking KDZ
01:14:38 : KDZ file extraced
01:14:39 : Files were extracted.
01:14:39 : LGMobileDL Load.
01:14:39 : Port = -1
01:14:39 : Connecting to phone
01:14:39 : PHONE WAS NOT FOUND!
01:14:41 : ===FINISHED===
Click to expand...
Click to collapse
I've been searching around all night but can't find a solution
Pretty much I can't do anything to make pc recognize the phone...
I would appreciate any help to fix this phone. LG GT540 Optimus
By the way, I used the usb port on the back of my computer...
try to flash in DOWNLOAD MODE. when turning on phone click power and volume down maybe then computer find phone.
The phone is recognized in download mode. However KDZ says phone not found?
check in windows hardware manager if you have in modems your phone turn the modem off and then try flash via kdz
gt540bricked said:
The phone is recognized in download mode. However KDZ says phone not found?
Click to expand...
Click to collapse
Indeed, I tried to connect the phone on download mode but still cant flash anything because kdz showed phone not founded.
Sent from my SGH-T989 using XDA Premium App
zxcvbnnm said:
check in windows hardware manager if you have in modems your phone turn the modem off and then try flash via kdz
Click to expand...
Click to collapse
I cant flash in download mode, and i cant find modems in device manager. Im pretty sure i have all the drivers, even tried to uninstall/reinstall reset computer...
Sent from my SGH-T989 using XDA Premium App
ahhh i no have more idea :/ i had too that problem, only first logo lg and nothing more but i flashed in download mode without problems. Good luck
Im still trying but im getting nowhere, is there anyone know about this problem?
Sent from my SGH-T989 using XDA Premium App
yes this problem is not new many others had this problem either they some how fix it or its lg service center...
Does anyone have lg gt540 international driver ?
Sent from my SGH-T989 using XDA Premium App
Here are all of my GT540 Win7 drivers:
LGAndroidDriver_WHQL_ML_Ver_1.0_All_Win7.exe
LGAndroidPlatformDrivers_WHQL_ML_Ver_1.2_All_Win7.msi
LGBluetoothDrivers_WHQL_Ver_1.1.msi
LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0.exe
LGSmartphone_USBDriver_WHQL_ML_Ver_1.0.exe
LGUSBModemDrivers_WHQL_ML_Ver_4.9.7_All_Win7.msi
LGUSBModemDriver_WHQL_ML_Ver_4.9.7_All_Win7.exe
download link: http://dl.dropbox.com/u/230395/netöröld/driver.zip
Thank you very much, i will try it as soon as i can and will post the result.
Sent from my SGH-T989 using XDA Premium App
4me it was a driver problem ...
drivers in download above should be good versions
if you are using win7 go to device-manager select everything like lg... or android... and uninstall with deleting drivers
uninstall lg suite, lg drivers, you can also clean up windows i.e. with glary utils, reboot, install drivers from above, connect phone AFTER installing all the driver-packages.
you can also try another usb-port
edit: maybe also a Security-Kit is blocking like Comodo Internet Security because it uses a sandbox for execution of unknown software.
Sadly I still get the same message in kdz with the driver prwnd (thanks for trying).
- I made sure that I uninstall everything related to lg and its driver
- Installed new driver, restarted.
- Connect the phone on download mode (volume down + plug in usb), the usb port is from the back of my comp, directly to mobo.
- Still no hope
I believe I read somewhere state that, if the phone can enter download mode, it's not fully bricked and I hope I can fix this phone for my friend...
Any help would be appreciated.
Re
Do you have access to fastboot or recovery??? POWER + HOME or POWER + CAMERA BUTTON ????
And one more thing which os do you use??? WIN 7 X86 or X64 or WIN XP???
If you don't have access to fastboot or recovery just reply which os do you use...
Thanks for the reply and sorry for the late response, i still have some hope
I dont have access to fastboot or anything, all i can get is either boot logo or download mode
im using win 7 64 bit
Sent from my SGH-T989 using XDA Premium App
Re
Go to someone who has WIN XP 32 bit install drivers an try all that stuff again i think that should do it... if don't send a pm....
I cant find anyone still using win xp 32 bit for now
Sent from my SGH-T989 using XDA Premium App
Before doing anything, make a backup to your external MicroSD card before continuing. Even if this method is very safe, and has been done several times without problems, we can't predict anything that may happen during the process.
RESTORE YOUR TABLET TO STOCK, APPLY ROOT, THEN FLASH A NEW RECOVERY.
This tutorial applies to both P3110 and P3113. They are the exact same models.
REQUIRED:
Odin ( Take any version you wish. The latest ones should do the trick )
The stock Firmware file. Concerning this part, Google is your friend.
The official Samsung USB Cable that came with your tablet. It is recommended (but optional) to connect your tablet into your computer's built-in USB ports.
The latest Odin-flashable recovery. ( P3113 uses P3110 files )
CF-Auto-Root
Patience
Returning your device to a like-new state.:
1. Boot into Recovery Mode. This can be achieved by holding Volume Up + Power when your device is powered off.
2. Wipe all data. [ Factory Reset ( /data /cache ), System ( /system ) and Internal Data ( /media/storage )
3. Reboot into Download Mode. Usually found on the Advanced Options of most CWM-based recoveries.
It happens that your Tablet cannot boot into Download Mode due to various reasons. There is a battery trick that can be achieved. Do it when you absolutely cannot boot into Download Mode.
1. Remove your tablet's battery.
2. Connect your tablet to your computer
3. Your device should automatically boot into Download Mode.
4. Put back your Battery back into your device.
Click to expand...
Click to collapse
4. Connect your Tab to your Computer
5. Run Odin as Administrator + Windows XP SP3 Compatibility Mode ( Right-Click > Run as Administrator // Right-Click > Properities > Compatibility > Windows XP Service Pack 3 )
6. Click the "PDA" button, and select the previously-downloaded firmware file.
7. Press Start ( Do not check repartition. It will totally screw up your device. )
8. The installation process will overwrite all data on your device and install the stock firmware.
9. You are done.
Click to expand...
Click to collapse
Rerooting your device.
1. Reboot your device into Download Mode. From there, you are not obligated to connect your device to your computer.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and select the CF-Auto-Root package you previously downloaded
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Installing CWM Advanced Recovery!
1. Reboot your device in Download Mode.
2. Open Odin as Administrator + Windows XP SP3 Compatibility
3. Connect your Device to the computer.
4. Click on PDA and browse the Odin-packed CWM package you downloaded.
5. Click Start, with Auto Reboot Checked! Again, do not check "Repartition" as it may screw up your device.
6. Wait until it's done.
Click to expand...
Click to collapse
Press the thanks button if this tutorial helped you.
If you have any problems, feel free to post in the thread. tho I won't probably help you.
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Luigi2012SM64DS said:
Nice guide, but don't we have enough?
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Yup.... I think there are enough guide avout this....
Sent from my GT-I9300 using xda premium
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
-_-
as007 said:
OK, but first I must install Triangle Away to reset the counter and next I use Odin and recover original rom.
Click to expand...
Click to collapse
Bro... You have to understand properly... Lame Juniors..
I AM NOT JUNIOR.. I JUST HAVE JOINED XDA FORUMS LATE!!:good:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Well when i use Customrom CM 10.1 i decide to back on Stockrom, i format my system and clear all my data so my tab was totaly clean even my customrom was gone so i flash it to stockrom. and yes my tab was totaly FRESH! :good:
idhbar said:
In op page it is mention about battery remove /in , but my GT p3100 does not have such option, battery is permanently fixed .
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
Hi, I have PA installed with TWRP installed. I downloaded my firmware from http://samsung-updates.com/. Do I need to flash the stock kernel as well? and stock recovery? Sorry for the noob question.
Maybe I'm just missing it, but I've gone to a couple of firmware sites and I can't find US firmware. Is there anywhere I can get that?
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
jdCaptivate said:
Does anyone have a link that's not to one of these stupid-ass, lame, @#$%ing pay download sites?
3 hours for firmware? WTF?
Click to expand...
Click to collapse
Latest P3113UECMH2 (4.2.2) : http://hotfile.com/dl/241707705/3ce5c6f/XAR-P3113UECMH2-20130826170038.zip.html
Or : http://uploaded.net/file/oadonsrj
Bibicp said:
Latest P3113UECMH2 (4.2.2)
Click to expand...
Click to collapse
TYVM!
jdCaptivate said:
TYVM!
Click to expand...
Click to collapse
Don't say thanks: press it.
Thanks I'm on 4.2.2 now
Dead Tab2?
WaryLouka said:
Just fellow the simple instruction: Hold Volume Down and Power when your tablet is off to go in Download Mode.
Contact me for further assistance
Click to expand...
Click to collapse
I have a similar situation. A previous rooting operation on my Tab2 7 P3113TS was either bad or partial and it appears it will not go into the download mode. power-pgup, power-pgdn, or just power all go to the Samsung splash screen then to a blue VeinDroid rom screen but no further. I tried 3 different version of ODIN and all recognize the device (port goes yellow) but cannot communicate. It stops at the SetupConnection step. Is this thing toast or is there something I'm missing?
WaryLouka said:
If a message is shown, press Volume Up. If you can't enter downloadmode normally, try doing "adb reboot download" in ADB. If you still can't, connect your phone to your computer, REMOVE THE BATTERY, hold Volume Up/Down + Power until DownloadMode is entered and put the battery in again. If your phone doesn't boot or/and battery trick doesn't work, use an USB Jig. If theres no usb jig, while until the battery icon is shown ( charging ) then do "adb reboot download" in ADB.
Click to expand...
Click to collapse
Are you serious????
REMOVE THE BATTERY????
I think it's not recommended to do anything like this only because of flashing a Fw, isn't it?^^
help plz
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Great!thanls for The tutorial
Sent from my Ativ S using Tapatalk
antkiller said:
Hi I lost my /efs files for my samsung galaxy tab 2 p3113 how do I fix this proble If some one can help me I would be very graitfull
Click to expand...
Click to collapse
do you have a backup?
To Anyone who gets problem to unbrick your LG Optimus L3 e400
It Really works for me.
How to instal LG Firmware using KDZ Updater
1. Download and Install USB driver for Lg L3 e400 from LG website or here
2.Download and install MSXML 4.0 SP3. here.
3.Download KDZ Updater here then extract it to your computer.
4. Download KDZ file according to your country or any compatible KDZ file. Download here
How to use KDZ:
1. Detach your external SD from your phone.
2. Remove your phone battery and wait for a few seconds.
3. Put your battery back to the phone.
4. Press volume - and + (or just in the middle of volume button) and power button at the same time.
5. wait till the phone screen turns to yellow (emergency mode) then release all the buttons.
6. Connect your phone to PC by using USB cable (your LG cable).
7. Stop or disable your antivirus or antimalware.
8. Run KDZ Updater as administrator.
9. Choose the following options in KDZ Updater:
Type: 3GQCT
Phone Mode: DIAG
and browse KDZ file is the one you downloaded, browse where you put this file and then select.
9. Click on “Launch Software Update”
10. If everything goes well, you will see “Finished” on KDZ Updater screen. Your phone will restart itself. You'll see the opening screen.
If something wrong happen it's usually because of the wrong download of KDZ file, broken KDZ Updater, or your antivirus.
I hope this could unbrik your LG L3 phone.
How to Root it.
After doing all the above now you can root your device again with this. Extract the file you just downloaded to your root of your computer.
Connect your device to the computer, then double click run.bat and wait till the device restart.
Now your device is rooted again
How to get CWM
Download from Google Play Rom Manager and download your CWM with this apk while online.
Good Luck
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
AfonsoADR said:
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes, You do need to root and install cwm again.
afonsoadr said:
hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes. You do need to root and reinstall cwm because it's very safe.
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Just reinstall driver, reboot pc after instalation and run kdz as admin.
Sent from my LG-E400 using XDA Premium 4 mobile app
konjkonjkonj said:
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Click to expand...
Click to collapse
You can only enter emergency mode because you haven't finished installing_KDZ. If I were you I would try download and install another KDZ file.
It will only work when you get the right KDZ file for your device. Don't worry to try another KDZ file.
Try another KDZ updater,
Unable antivirus and firewall.
Keep on trying. I hope these will unbricked your phone.
Sent from my LG-P705 using XDA Premium 4 mobile app
mr_techno said:
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
Click to expand...
Click to collapse
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
george brown said:
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
Click to expand...
Click to collapse
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Download Quick Boot Reboot from play store. Run it select recovery then it should hard reset your device.
Sent from my LG p705 using XDA Dev Soft.
mr_techno said:
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Click to expand...
Click to collapse
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Delete
help me
please help me... why after i press start upgrade at kdz updater. it says phone was not found even says it Finnish and nothing happen next? either i am connected to pc and already have needed drivers? please can you help me. i installed cyanoid14 standard and my phone goes boot loop like blinking white background infinitely
Have you tried entering into CWM?
If so, then you should do factory reset, wipe cache, and go to advance then wipe dalvik cache then restart your phone.
Sent using Tapatalk
george brown said:
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Click to expand...
Click to collapse
Tried that, tried flashing another roms, tried KDZ, tried multiple stock roms....nothing works.... It says it's charging without cable being connected.
stuck with cm9
For those you stuck and cannot flash back to stock ROM. enter to CWM, and leave it there. Connect to PC and flash with EMERGENCY mode (not DIAG)
Works perfectly, tested in Windows 8
Thanks!
Unable to download kdz
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
petriedave said:
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
Click to expand...
Click to collapse
Nothing wrong with the links. I''ve checked them several times.
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
vaserbanix said:
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
Click to expand...
Click to collapse
done.thanks mate
problem still persists
havent find the solution yet...
or mayb anyone out there can send me the files to flash my device....or....any other solution?
Found The Solution
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
internel space issues
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
apih46 said:
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
Click to expand...
Click to collapse
yeah..im too having 1gb plus internal memory..but im onlu having 2 storage option
1. internal / phone starage
2. external/sd card.
i cant help u in this issue..i just able to give live to the phone..mayb this march i will do some research on that since im quite buzy right now..any progress i will let u know..
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
Able to root this qlux 4g ?
Yes...pls use iroot
kavinraj88 said:
Yes...pls use iroot
Click to expand...
Click to collapse
Did you flash any ROM.?
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
kavinraj88 said:
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
Click to expand...
Click to collapse
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Preshak said:
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Click to expand...
Click to collapse
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
kavinraj88 said:
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
Click to expand...
Click to collapse
Recovery from pdanet worked. But sdcard0 is not detecting.
Anyways thanks for taking your time to upload file.
Have you tired xposed installer ?
Do you mind showing me some screenshot.
Any tips on how to connect the phone to PC?
My PC just doesn't want to recognize my phone
Tried several ZTE drivers but they all didn't work
custom rom for zte blade qlux 4g
please upload a custom rom for this model to make the mobile faster.
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
ferbulous said:
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
Click to expand...
Click to collapse
yes..u can use Maui META Tool or MTK Engineer Mode (play store)..both works...btw, im not using the phone anymore...sold it..
raymond_bqg said:
please upload a custom rom for this model to make the mobile faster.
Click to expand...
Click to collapse
only russiian versioan avaiable so far... google for it
hi.. just wondering, are there qualcomm & mtk version for zte blade q lux 4G ?
*EVERY ACTION YOU PERFORM FOLLOWING THIS GUIDE IS AT YOUR OWN RISK*
That to be said, let's start: i am currently running the latest official nightly build on my d855 and it took me a while to get there. I couldn't find any (real) step-by-step-guide, where i would not have to google any errors or anything else.
Everything you find here is NOT my own knowledge, it is just compilation of sources, that i found on the internet.
Note:
Android 6.0: if you are on 6.0 and you always updated so you're on the latest security-patch-level the one-click-root-method won't work. I recommend downgrading your phone, which will be explained in the following.
Android 5.0: if you're on 5.0 you need to upgrade to 6.0 anyways, bc you need a different baseband-version to install LineageOS. This will also be explained in the following.
1. Make a backup of your phone
this is recommended, although i didn't do this, this is why i am not gonna explain it one here. I just saved my pics and contacts and did a factory reset, restarted my phone, did all the "first time turned on stuff" and connected to my wifi.
Note: Make sure your phone is charged to 60% at least
2. Download the following
a. Download LG G3 Drivers 4.0.4 and install them (i believe there are more recent ones, but this worked for me)
b. Download LG UP
- Download: LG UP Ver. 1.14: LGUP_Install_Ver_1_14_3.msi and LGUP_8974_DLL_Ver_0_5.MSI
- Make sure to install the DLL first and then the other .msi
SOURCE: Thanks to hyelton
c. Download the proper KDZ for you phone.
Note: I got this infos from a german site.
This is the 30C KDZ for the 32gb AND 16gb version: Download here
SOURCE: Thanks to mr bo
3. Downgrade/Upgrade your android-version
1. Turn off your phone.
2. Run LG UP (the tool you just installed) and press okay when you see the error message, that no phone is connected.
3. Press "Volume Up" on your phone and HOLD it, connect your phone to you computer via USB 2.0 PORT! This is important, bc connecting via 3.0 won't let LG UP recognize your phone.
4. Your phone is now in download-mode and LG UP should have recognized your phone.
5. Press SELECT, click on UPGRADE, then click on FILE PATH, choose you prefered .KDZ.
6. i recommend refurbishing your phone (This will wipe your entire system and make a clean install).
CLOSE LG UP and start it back up. The .KDZ should still be there. Now select REFURBISH and click on START. Wait until 100% completed and you phone has booted up completely.
Source and further information: Hail hyelton!
Also here is a youtube video: Thanks to kiaTech
4. Root your phone
1. Download the latest kingroot.apk from here.
2. Connect your phone (turned on, after all the "first time turned on stuff") and move the .apk to your Download-folder.
3. Open the (stock) filemanager on your phone and navigate to Downloads.
4. Install the kingroot.apk (enable third party .apk, when asked)
5. Open the app and root your phone (it's simple, believe me).
6. Your phone is now rooted (leave it turned on, DON'T restart)
5. Install TWRP and update to the latest version
1. Download this pack and unzip it.
2. Move the AutoRecMMD855.apk to your phone and install it just like kingroot.apk before.
3. Open the app and follow the instructions.
4. You now got TWRP on your phone.
SOURCE for #4 and #5 till here: Thanks to tute123456
5. Boot into recovery mode (either with the app itself i think or manually. If you have to do it manually. Turn of your phone. Press POWER and VOLUME DOWN at the same time until the screen shows soemthing. Release and immideatly press again. Your phne will ask you if you want to FACTORY RESET. Press YES and YES. If everything is working properly, TWRP should start up).
6. Connect your phone and download the latest TWRP.img you. In example here's the european one Latest LG G3 TWRP EUROPE
7. I assume you never disconnected your phone since moving kingroot.apk to it. So now you just move the TWRP.img to your Download folder.
8. Choose INSTALL on your phone and search for the TWRP.img. Select RECOVERY and flash it.
9. Choose REBOOT and then RECOVERY.
10. Your phone will boot into TWRP again. It should be updated to the latest version 3.0.2-0.
SOURCE: Thanks to everyone who contributed
6. Flash LineageOS and install GApps
1. Download the latest version of LineageOS (nightly) from here
Optional: make a backup of your phone using TWRP and safe it on your pc or internal SD Card, bc in the next step you will wipe your entire system, to get a clean installation.
2. Press WIPE in TWRP and select ADVANCED WIPE. Select everything but "Micro SD Card" and perform the wipe. This will wipe your entire system!
3. Move the .zip file to the Download folder on your phone and press INSTALL in TWRP. Search for the .zip and flash it.
Note: you'll see two red error messages. This is normal!
4. Wipe cache and dalvik as recommended.
5. Download your desired Open GApps package from here. Use "ARM" and "7.1", i recommend the "mini"-package.
6. Move the downloaded file to your Download folder on your phone and flash it just like you did the LineageOS file.
7. Wipe cache and dalvik.
8. In the main menu of TWRP choose REBOOT and then SYSTEM.
9. It will take a while to boot up, don't worry, just leave it there.
10. You succesfully installed the latest LineageOS build on your phone - you can now unplug your phone from your PC also :good:
SOURCE: LineageOS official wiki
*reserved*
*reserved for further changes*
Hi pheb92,
Big Thank You, If I had to do it bymyself it would have take me hours!!
-3. Downgrade/Upgrade your android-version -- I had trouble finding the right DLL on my Windows 10 system, onetime I managed to use LG - Up. At that moment the DLL loaded was 4.2.0.0. date 23-8-2016 device name "LGE AndroidNet USB Serial Port (COM6)"
- 6. Flash LineageOS and install GApps -- I flashed straight from a uSD card inserted in the LG G3.
Thank you for the great Setp-by-Step!
Regards, Onedutch
onedutch said:
Hi pheb92,
Big Thank You, If I had to do it bymyself it would have take me hours!!
-3. Downgrade/Upgrade your android-version -- I had trouble finding the right DLL on my Windows 10 system, onetime I managed to use LG - Up. At that moment the DLL loaded was 4.2.0.0. date 23-8-2016 device name "LGE AndroidNet USB Serial Port (COM6)"
- 6. Flash LineageOS and install GApps -- I flashed straight from a uSD card inserted in the LG G3.
Thank you for the great Setp-by-Step!
Regards, Onedutch
Click to expand...
Click to collapse
hi onedutch. i am glad, that i could help you. concerning your quotes: are those questions? do you need any further help?
pheb92 said:
hi onedutch. i am glad, that i could help you. concerning your quotes: are those questions? do you need any further help?
Click to expand...
Click to collapse
Those are remarks, I think it could help others if they run in trouble aswell.
Cheers, Tom
unrooted?
i did everythimg step by step.right now im running lineage OS. the problem is that rootchecker says im unrooted.im also tryimg to setup supersu from play store but it cant staart cause it says im unrooted.any ideas here? thanks in advance!!
teridona said:
i did everythimg step by step.right now im running lineage OS. the problem is that rootchecker says im unrooted.im also tryimg to setup supersu from play store but it cant staart cause it says im unrooted.any ideas here? thanks in advance!!
Click to expand...
Click to collapse
as far as i know LineageOS doesn't have an inbuilt root access (so far) like cyanogenmod did. you can only enable root access via adb in the developer options.
i did not root lineageOS myself so far, but you can try the following:
- Download superSU.zip from their official website and flash it via TWRP.
i would appreciate it, if you would share the outcome
pheb92 said:
as far as i know LineageOS doesn't have an inbuilt root access (so far) like cyanogenmod did. you can only enable root access via adb in the developer options.
i did not root lineageOS myself so far, but you can try the following:
- Download superSU.zip from their official website and flash it via TWRP.
i would appreciate it, if you would share the outcome
Click to expand...
Click to collapse
LineageOS does have built in root management, but it doesn't ship rooted by default.
This change was made so SafetyNet doesn't get triggered by root and you can use Android Pay on your device.
Just download the su zip from LineageOS download page and flash.
pheb92 said:
3. Downgrade/Upgrade your android-version
1. Turn off your phone.
2. Run LG UP (the tool you just installed) and press okay when you see the error message, that no phone is connected.
3. Press "Volume Up" on your phone and HOLD it, connect your phone to you computer via USB 2.0 PORT! This is important, bc connecting via 3.0 won't let LG UP recognize your phone.
4. Your phone is now in download-mode and LG UP should have recognized your phone.
Click to expand...
Click to collapse
I am stuck on this step. My d855 gets into download mode and LG UP recognizes the phone, but I'm getting the "You have to select a known model, please" error in LG UP. I have uninstalled and reinstalled LG UP and the DLL multiple times, same problem. I also tried uninstalling and reinstalling the driver, and I tried other drivers, same problem. I tried the tip in another thread (https://forum.xda-developers.com/showthread.php?t=2785089) to change the port to COM41 in device manager, but it didn't help. Btw I also unrooted my d855 (it has 4.4.2 currently) in case that's why the tool couldn't recognize it. Please help!!
Also @hyelton if you can help...
@engmia since you were helping me earlier...
Thanks.
supperbowl said:
I am stuck on this step. My d855 gets into download mode and LG UP recognizes the phone, but I'm getting the "You have to select a known model, please" error in LG UP. I have uninstalled and reinstalled LG UP and the DLL multiple times, same problem. I also tried uninstalling and reinstalling the driver, and I tried other drivers, same problem. I tried the tip in another thread (https://forum.xda-developers.com/showthread.php?t=2785089) to change the port to COM41 in device manager, but it didn't help. Btw I also unrooted my d855 (it has 4.4.2 currently) in case that's why the tool couldn't recognize it. Please help!!
Also @hyelton if you can help...
@engmia since you were helping me earlier...
Thanks.
Click to expand...
Click to collapse
hi supperbowl,
are you sure you're using a USB 2.0 port and the original LG-USB-Cable, that came with the phone?
as far as i experienced it, 4.4.2 should not be an issue.
supperbowl said:
I am stuck on this step. My d855 gets into download mode and LG UP recognizes the phone, but I'm getting the "You have to select a known model, please" error in LG UP. I have uninstalled and reinstalled LG UP and the DLL multiple times, same problem. I also tried uninstalling and reinstalling the driver, and I tried other drivers, same problem. I tried the tip in another thread (https://forum.xda-developers.com/showthread.php?t=2785089) to change the port to COM41 in device manager, but it didn't help. Btw I also unrooted my d855 (it has 4.4.2 currently) in case that's why the tool couldn't recognize it. Please help!!
Also @hyelton if you can help...
@engmia since you were helping me earlier...
Thanks.
Click to expand...
Click to collapse
Have you tried it with the phone booted into the OS? With USB debugging on? Also if running 4.4.2 why not just use the old method?
Sent from my iPhone using Tapatalk
hyelton said:
Have you tried it with the phone booted into the OS? With USB debugging on? Also if running 4.4.2 why not just use the old method?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No I've only tried it with download mode. I have USB debugging enabled in the OS. I am now trying the old method with LG flash tool, so far I'm getting stuck with the LG mobile support tool which keeps saying "upgrade stopped due to an error".
Edit: LG UP doesn't recognize the handset at all with it booted into the OS.
pheb92 said:
hi supperbowl,
are you sure you're using a USB 2.0 port and the original LG-USB-Cable, that came with the phone?
as far as i experienced it, 4.4.2 should not be an issue.
Click to expand...
Click to collapse
Yes it's USB 2.0 and the original cable.
supperbowl said:
No I've only tried it with download mode. I have USB debugging enabled in the OS. I am now trying the old method with LG flash tool, so far I'm getting stuck with the LG mobile support tool which keeps saying "upgrade stopped due to an error".
Yes it's USB 2.0 and the original cable.
Click to expand...
Click to collapse
Just use lgup with the device booted into android
Sent from my iPhone using Tapatalk
hyelton said:
Just use lgup with the device booted into android
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
LG UP doesn't recognize the device at all with it booted into Android, the "Model List" comes up empty.
supperbowl said:
LG UP doesn't recognize the device at all with it booted into Android, the "Model List" comes up empty.
Click to expand...
Click to collapse
And USB debugging enabled?
If it's at least detecting unknown device while in download mode it most definitely should show up in lgup when boot up.
Choose MTP mode? And it's not just in "charging mode" or try vice versa?
Sent from my iPhone using Tapatalk
hyelton said:
And USB debugging enabled?
If it's at least detecting unknown device while in download mode it most definitely should show up in lgup when boot up.
Choose MTP mode? And it's not just in "charging mode" or try vice versa?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes, USB debugging is enabled and my computer is allowed permissions.
Yes it's MTP and I also tried charge only and LG software modes. With LG Software mode it comes up with the unknown device in the model list again.
supperbowl said:
Yes, USB debugging is enabled and my computer is allowed permissions.
Yes it's MTP and I also tried charge only and LG software modes. With LG Software mode it comes up with the unknown device in the model list again.
Click to expand...
Click to collapse
what also worked for me once was just retrying the process --> turn off, go into LG UP, go into download-mode. if LG UP does not recognize the phone: put the battery out of your phone, close LG UP and start the process again (also with different USB ports and other USB-Cables).
Hello,
Need to have unlocked bootloader ? Work on SEA version ?
You did not installed LG UP DLL properly
supperbowl said:
I am stuck on this step. My d855 gets into download mode and LG UP recognizes the phone, but I'm getting the "You have to select a known model, please" error in LG UP. I have uninstalled and reinstalled LG UP and the DLL multiple times, same problem. I also tried uninstalling and reinstalling the driver, and I tried other drivers, same problem. I tried the tip in another thread (https://forum.xda-developers.com/showthread.php?t=2785089) to change the port to COM41 in device manager, but it didn't help. Btw I also unrooted my d855 (it has 4.4.2 currently) in case that's why the tool couldn't recognize it. Please help!!
Also @hyelton if you can help...
@engmia since you were helping me earlier...
Thanks.
Click to expand...
Click to collapse
1) Remove LG UP DLL completey
2)Install the LG UP DLL again
3)Put your phone into recovery mode, wipe data and cahce
4)put your phone into download mode, then run the LG UP