[Q] Snapvue asking for password...?! - Shift General

Hi, I turned on my Shift for the first time in a moth or so and the Snapvue (liberated) won't allow me past the password screen. I haven't set a password! I've tried with/without various SIM cards but nothing. Any ideas? I've tried reseting it from withing Comm Manager but makes no difference. I can't even find a way of reflashing it as I can't establish a connecting that shoes up in Mobile Manager.....

Password for snapvue? Strange.
In Windows resetting Snapvue Settings using Hardkey up right there's some reset button- tried this?

shanedean said:
Hi, I turned on my Shift for the first time in a moth or so and the Snapvue (liberated) won't allow me past the password screen. I haven't set a password! I've tried with/without various SIM cards but nothing. Any ideas? I've tried reseting it from withing Comm Manager but makes no difference. I can't even find a way of reflashing it as I can't establish a connecting that shoes up in Mobile Manager.....
Click to expand...
Click to collapse
I had the same problem no idea what caused it and it happened twice. To get wm back you have to take the battery out and let it reboot from cold at least that worked for me.

Yes I have had the same thing, without booting in to your windows version it appears to ask for a password to access WM5 when you press the screens bottom left button which boots into WM5. Ive not set a password is there a default one?
Any further help on this appreciated as I could do with accessing WM5 without booting, I'll check within Win 7 now to see if theres a way around this password issue, dont think I have the problem when in Win 7 going to WM5? Very odd not found any detail as to what this pass is?
ATB

Related

s200 won't boot into windows anymore

hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday

Help Pls! My Trinity is frozen.

Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
won't boot
mihaimoro said:
Hi guys,
This is my problem:
I have an Orange SPV 700. I have unlocked it few month ago and installed the Indigo Full ROM. Today in the morning i downloaded some stuff in my phone, and it started to work very slow (probably the memory was full). I have reset it and it didn't boot up.
When i start the phone i see the "by bepe" screen, then "smart mobility" screen and then the "windows mobile 6 professional" apears and nothing happend anymore.
I tried to install another rom but the Active Sync doesn't connect. When I conect the phone, the active sync tries to conect, but it doesn't succeed, but the network connection apears in control panel and i can even ping the device.
Can anybody help me reset/format/anything my device?
10x
Mihai
Click to expand...
Click to collapse
Do a hard reset
how? if you mean to press the little button from the bottom, i've allready done that. Actually that's the only button that works. If I want to shut down the phone, i have to remove the battery.
10x
Mihai
no solution yet
I see that nobody gave me an answer...
May be you can help me this way:
Anyone know a way to access phone's memory without using activesync?
10x very much
Mihai
You should REALLY start reading before asking...
Go to this address:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Have fun resetting that thing...
10x
10x
I didn't know what to search for
Mihai

my HD froze, hard reset not working

Hi all, first time poster long time browser I checked the wiki and did a search but couldn't find a similar post. Here goes..
Yesterday i tried to connect to this protected wifi at a coffeeshop, but my HD did not manage to connect even after entering the network password. In the end it froze. The home screen was showing, i could feel the vib when pressing the screen, but no action happened. I did a soft reset, but that didnt make a difference... nothing working still, while it is still trying to connect to wifi.
Then I first did one hard reset. I managed to get to the screen where i am asked to touch the screen in order to configure the device. While i could feel the vib, nothing happened. I did a second hard reset, ended up at the same screen, but this time there is no vib when pressing the screen... and still nothing is happening. Same situation when doing a third hard reset.
I am lost for ideas.... Have anyone of you ever experienced something similar and what did you do to resolve it? Or have anyone any suggestions as to what I should try next??
Very bad dude,
what you can do (i dont know if this will work).....Flash your original rom again. it is a kind of a hard reset, but maybe this will work.
can you boot to boatloader (three color screen), and see the text USB when connected to pc?
Hi Kadir,
thanks for your answer.
I am trying to flash my rom using the excellent tool Hard-SPL package from OliNex, but to no avail.... i keep getting error message 202 meaning that it can't connect with the device...
This may sound obvious, but just in case... have you tried to remove the battery when the device is turned off? Is the only way to ensure you are fully turning it off, in case you have some kind of 'static' acting up. I had a similar issue on a PDA and also in my notebook, and was solved by removing battery.
hi,
thanks for the advice. I wish this was all it took, but alas no, i am not that lucky. I am starting to think this is a hardware issue....
can you see the 3 color screen?(when phone is off push power on + volume down button and keep volume down pushed).
if yes can you see it you are now in the bootloader. just chech if you see text usb, this means its connected.
and then flash, no 202 anymore.
do not use hard spl if you want HTC to repair your phone(warranty issue)
Don't you have to disable USB connection in ActiveSync too? Or was that just me?
I found the Flash program killed active sync anyway, but you're right all the guides say to disable it.

Huge activesync problem.

Hello guys and gals. I messed up the phone again, but this time hard reset is not an option so I need a way to fix it. I installed the activesync killer (I believe that app caused my problems) from here:
http://forum.xda-developers.com/showthread.php?t=386948
At first i thought it worked fine, but then every time i disconnected my phone from the PC the phone froze. I uninstalled it, but the problem was still there.
Today it got even worse. I cannot connect to my PC neither via activesync nor using the x1 as a flash drive. !!!!!!
Has anyone of you encountered such a problem and is there a way to fix this without hard resetting the device. Maybe a way to reinstall the async on the Xperia?
Help pl0x???
did u try resetting it via the small button at the battery?
leobox1 said:
did u try resetting it via the small button at the battery?
Click to expand...
Click to collapse
That is a restart of the phone. A soft-reset. I do it 10 times a day .
Anyone?
(hidden bump)
Ok, i got some development with it. I reinstalled wktask and the freezing is gone. Now the only problem left is that i cannot connect neither with the activesync (the phones says connecting forever), nor with the microSD (the PC says invalid location drive:I). I'm pretty sure i messed up some drivers. Is there a way to reinstall the connectivity drivers?

Cannot access the setting

Hi guys, newbie here. I have a problem with my T-Mobile Wing. Few days ago, I can no longer access the setting on my Wing, everytime I click on Start -> Setting, my phone freezes. I tried hard reset (already 3 times) and still no joy, any clue why it happened and any clue on how to fix it?
Thanks in advance,
N3O
ps. my T-Mo Wing is wm6 and only had HTC Home installed on it
n3o said:
Hi guys, newbie here. I have a problem with my T-Mobile Wing. Few days ago, I can no longer access the setting on my Wing, everytime I click on Start -> Setting, my phone freezes. I tried hard reset (already 3 times) and still no joy, any clue why it happened and any clue on how to fix it?
Thanks in advance,
N3O
ps. my T-Mo Wing is wm6 and only had HTC Home installed on it
Click to expand...
Click to collapse
Are you sure you actually hard reset didn't soft reset? Hard resets basically rewrite the o.s. over the old o.s. (holding down the two select buttons labeled "-" and pressing reset). If that still doesn't work, you have something fishy going on, but seeing how it seems to be a software issue, I can't imagine hard resetting wouldn't fix this. If this still doesn't work, try flashing to a new rom.
yes, I did, I had to re-install everything I had. I even need to enter my device ID through registry hack, because I can't access the setting to enter owner's name.
n3o said:
yes, I did, I had to re-install everything I had. I even need to enter my device ID through registry hack, because I can't access the setting to enter owner's name.
Click to expand...
Click to collapse
Hmmm, that's kind of strange, but maybe you are using a custom rom? I would try flashing to another rom.
no doug, it's the original T-Mobile ROM, that's why I got confused too. Usually when something bad happens, I hard-reset it and things would go back to normal again. I can only access the setting if I change the battery, and the setting will be accessible again for a couple minutes and unaccessible again after that. Weird huh?
n3o said:
no doug, it's the original T-Mobile ROM, that's why I got confused too. Usually when something bad happens, I hard-reset it and things would go back to normal again. I can only access the setting if I change the battery, and the setting will be accessible again for a couple minutes and unaccessible again after that. Weird huh?
Click to expand...
Click to collapse
That is def strange. Never heard of something like that. It def sounds like a software issue, but you ruled that out by reflashing the os. odd....

Categories

Resources