[HELP] INU or INS CSC needed - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi,
I have N910C got it from UAE and am now using it in India. It came with XSG CSC because of which I guess I don't get more than two network bars and my battery keeps draining, whereas when I put the same sim in my S5 I get full or at least 4 network bars.
I am currently on wanamlite it has multiple CSC but doesn't have INU or INS in it. I tried asking in the rom thread but I got no response there.
It would really be helpful if anyone can provide me with Indian CSC flashable zip.
Thanks.

Bump. Anyone?

Related

Please help with SM-N9005

Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
i think it means that firmware is not compatible ,but i may be wrong
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
I started a simlar thread a few days back asking similar question. I am trying to flash ROM from different region and without success. so far no one has replied a way to do it. I have Vodafone ROM on my N9005 and I have managed to flash it with BTU ROM but not TGY ROM. Apparently any european ROM I can probably flash but not asia. So you is the other way round.

[Q] I have 2 active csc codes??

Today I flashed 3 firmwares lol
1- PET
2- INU
3- KSA
I flashed PET when I booted first time I saw "Claro" logo (peru network operator)??
I removed the battery immediately!! Before csc or anything apples like network locked (stupid sammobile) then i flashed KSA
Everything is ok
Then I flashed INU but I didnt see anything new with the firmware so I flashed KSA again but the weird thing is now I have 2 active csc codes??
Why is that??
You are calling "stupid sammobile" and you flashed 3 different firmwares one rear other. Who is the person that dont know what is doing? :silly:
I flashed 3 firmwares because I was looking for whats new in the updates and I called sammobile stupid because they didnt write on the PET firmware "Claro" operator, whos the stupid now? :/
And I flashed INU because the changelist is bigger than KSA so I flashed it but there no difference between INU & KSA
So I flashed KSA again because I want the apps that came with the KSA firmware

[Q][I9505] CSC changed itself

hi guys. anyone experienced the same. here's what happened:
i was using i9505 glb kitkat (csc=glb=globe philippines). i flashed clockworkmod, then install carbon rom.
last month, i re-flash my original glb kitkat. then went to recovery. i noticed that the csc changed to sin (singapore singtel) without doing anything.
now my problem is what rom should i use next time i update to lollipop: glb or sin.
pls help and many thanks.
Is your phone SIM unlocked? If it is, it doesn't matter which CSC you use. Otherwise, stay with CSC GLB.
No. I used regionlockaway to make it sim unlocked.
Then as mentioned, the CSC doesn't matter. Case in point is my I9505. Originally an O2 phone, when I purchased it the S4 was already unlocked and had Ukranian firmware on it. When I installed the Black Edition UK firmware (CSC BTU) after repairing my S4's SIM tray and again removing the SIM lock, I ended up with CSC AUT (Switzerland) instead.
On an open firmware such as CSC BTU, there are actually multiple CSCs within the firmware, and all the CSC does is customize the firmware to the needs of a specific region. In the case of AUT, the firmware installed three Swiss-specific apps that could be easily removed. BTU and the other CSCs essentially do the same thing, and I am guessing this is without modifying the firmware itself.
Ok. Thanks guys. I'll still use glb firmware once lollipop is released. I had once semi-bricked my s4 (got repaired at samsung center) so i'm kinda nervous this time.

Back to stock rom o2u

HI all i wouldnt say im a noob have been flashing roms for years, i wanted to flash BTU firmware on the s7 edge all worked fine but no updates and i seen o2 have been rolling out updates monthly so wanted to go back to the o2u rom only thing is when i flash it i get the German rom with VIA and not o2u as well as all the bloat! ANY ONE ANY IDEA WHY IM GETTING VIA AND NOT O2U and it is the o2u firmware i have downloaded it twice from diffrent sites any help guys ????
Post results from *#1234# and also the link to firmware.
http://www.sammobile.com/firmwares/download/71125/G935FXXU1APDH_G935FTEF1APC2_O2U/
this is the link to the firmware i downloaded as well as
http://stockroms.net/file/GalaxyS7Edge/6.0.1/UnitedKingdom/O2/G935FXXU1APD1_G935FTEF1APC2_O2U.zip
AP: G935FXXU1APDH
CP: G935FXXU1APD1
CSC: G935FTEF1APC2
Model: SM-G935F
What i use to have but now it shows VIA and germany ???

Clarification regarding multi csc

Hello everyone,
I thought of changing my mom's s7 edge region to BTU (currently KSA) as it is very slow in getting OTAs. It only got the December security patch update a week ago or so. As I am not familiar with Samsung phones, I read the forums for every info about CSCs (the CSC and home_CSC were very confusing). I checked the CSC using phone info and it does not have the original CSC, but have a lot of available CSCs and from what I read, I presume the ROM is multi CSC and that it comes with KSA because of the origin country.
But the problem is that I read somewhere that if you flash the firmware of some other region (eg BTU), you cannot go back to KSA, instead it will default to XSG, and also that you need root to select CSC. It also said 'maybe' I would be able to return to the original CSC using smart switch. Can anyone confirm this?
Will it be denied warranty or something when I cannot revert CSC back to KSA before giving it for warranty? (I read that changing region generally does not void warranty, but I think I'm paranoid **thinking of my mom screaming at me**)
Also if I flash the UAE firmware (XSG), will I still retain my own CSC if I do not flash the UAE CSC along with it because XSG is given is my available CSC codes? ( If that is true I should flash BL+AP+CP without CSC or am i wrong?)
Please pardon me if this was asked before but I could not find any information regarding the first and third question
Thank you very much!

Categories

Resources