Related
Hi,
I got the N7100 on launch day, and rooted using CWM, leaving my phone with a 'custom' recovery, which is noted on the download boot mode.
Now that triangleaway supports the N7100 I thought I would try and get it less dodgy looking which still rooted.
When I ran triangle away, it warned that a custom bootloader / recovery might leave the counter on 1 even after away'ing the triangle...
So I thought I would use mobile Odin Pro to flash stock rom, injecting SU and mobile odin (as i did many times on my note 1).
This failed (using rom N7100XXALJ1_N7100OXXALJ1_BTU) - it verified the MD5 ok, and rebooted into a screen ive never seen before, containing a large blue Android figure with a lightening bolt on his chest. I personally thought he looked a little unhappy as well...
Anyway, first time this happened, i used desktop odin to do a full flash, which fixed it (but increased my custom counter more since I rerooted with CWM+root).
Second time it happened, i fixed it by just re-flashing CWM.
Anyone else had success with Mobile Odin on the N7100 ??? do you think it was the CWM install that it didnt like ?
Im unsure how to flash just the recovery, and am a bit confused between the relationship between the boot image and the recovery one... i wouldnt have expected the recovery image to affect normal boot, but it does.
George
UPDATE - The blue android is actually the mobile odin pro logo... gonna try again and be a little more patient...
...you....fool
Left it 10 mins, and still stuck on blue android screen... gonna try flashing from sd card rather than internal card in case its that...
luckly reflashing cwm6-root-note2.tar from odin fixes it...
Also tried flashing from external sd, and that also failed.
Does anyone know how Chainfire likes issues to be reported?
thanks
George
You can get answer your some question here
http://forum.xda-developers.com/showthread.php?t=1930418
Is that blue android screen not doing anything at all?
I was the one who tested this app prior to its release (on behalf of chainfire who didn't have the phone at that time), I flashed from internal and external without issue.
What is it your flashing exactly? Your not listing it as a OTA/Update.zip are you?
Try to delete the Mobile Odin file off the root of your sd card and open the app again, it will then re-download the files it needs, try it then.
A few other users have reported the exact same problem, and I am pretty sure it will be related to the problem of Triangle Away not always booting up.
Something fishy is still going on with recoveries, and we're not sure what. I can't replicate the problem on my device - at all - so I can't fix it either.
Maybe it has something to do with bootloader version? It seems some people/firmwares have different bootloaders than others and can cause various problems.
What I find strangest is that the Mobile ODIN logo does show up ... that's just weird. Can you use the attached version of Mobile ODIN (its an older version that does not support the Note2) to create a dump file for your device, so I can compare it with the dump files from working devices? It may offer a clue.
EDIT: Download removed, dump made and received.
Dumping...
Hi Chainfire,
Thank you for the response im impressed by your commitment to making our devices better ...
Im doing a dump now [fnarr fnarr] and will make it available to you as soon as its done.
I presume it will be quite large if it takes 30 mins to upload - shall I pm you or email you the dropbox link where i plan to put it?
LennyUK - im flashing what is supposed to be (and in fact is) the latest official rom - i believe its the original shipped rom + an OTA that the UK got. Not sure if it comes from Samsung or its been hacked together from the OTA + original rom. It was downlaoded from sammobile (as i always did with my note 1). Its a tar file (.md5) containing a bunch o f.img files and modem.bin. Im not convinced the N7100 mobile odin flash kernel was corrupted - i would expect CF does a checksum of some sort... ill await his response to my dump.
ps. Why doesnt XDADevelopers email notification work
cheers
George
Chainfire said:
A few other users have reported the exact same problem, and I am pretty sure it will be related to the problem of Triangle Away not always booting up.
Something fishy is still going on with recoveries, and we're not sure what. I can't replicate the problem on my device - at all - so I can't fix it either.
Maybe it has something to do with bootloader version? It seems some people/firmwares have different bootloaders than others and can cause various problems.
What I find strangest is that the Mobile ODIN logo does show up ... that's just weird. Can you use the attached version of Mobile ODIN (its an older version that does not support the Note2) to create a dump file for your device, so I can compare it with the dump files from working devices? It may offer a clue.
Click to expand...
Click to collapse
Dump
Hi,
Here is the dump ...
thanks
George
EDIT: Dump received and removed, thanks.
had the same problem when trying to flash the exchange hack.
used pc odin to upload CWM and this made my phone boot again
Hi, for the record, i tried triangleaway, and ... it booted into it OK, and ran the procedure to reset the counter...
and its worked... I now get
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
im guessing the custom is due to CWM recovery...
cheers
g
Weirdness. It appears your cache partition is borked (its 10 MB instead of 1.5 GB ?!). This could explain the following problems people have reported:
- Mobile ODIN showing the logo but doing nothing else
- Triangle Away breaking recovery
Try flashing the attached cache file in (desktop!) ODIN, then try Mobile ODIN, Triangle Away, etc again. Problem should be solved then - please do let us know, several people are having this problem.
It's a ZIP file, extract once so you end up with a TAR file, put that in ODIN. If you end up with an IMG file, you extracted twice!
EDIT: Note: after flashing this image you will probably automatically boot into recovery - this is expected, just press power to reboot normally.
Hi,
Thank you... flashed the cache.zip, and it rebooted to the Galaxy Note II screen, then rebooted, over and over again...
so I reflashed the rooter, (cwm6-root-note2.tar) which DOES include flashing the cache, so maybe thats got a broken cache in it ? (the reflash fixed it)
odd...
Ive attached to rooting tar ive been using with the strange (but working...) cache file...
cheers
g
Chainfire said:
Weirdness. It appears your cache partition is borked (its 10 MB instead of 1.5 GB ?!). This could explain the following problems people have reported:
- Mobile ODIN showing the logo but doing nothing else
- Triangle Away breaking recovery
Try flashing the attached cache file in (desktop!) ODIN, then try Mobile ODIN, Triangle Away, etc again. Problem should be solved then - please do let us know, several people are having this problem.
It's a ZIP file, extract once so you end up with a TAR file, put that in ODIN. If you end up with an IMG file, you extracted twice!
EDIT: Note: after flashing this image you will probably automatically boot into recovery - this is expected, just press power to reboot normally.
Click to expand...
Click to collapse
Failed to upload..
at
https://dl.dropbox.com/u/279536/cwm6-root-note2.tar
thanks
g
ripnetuk said:
Hi,
Thank you... flashed the cache.zip, and it rebooted to the Galaxy Note II screen, then rebooted, over and over again...
so I reflashed the rooter, (cwm6-root-note2.tar) which DOES include flashing the cache, so maybe thats got a broken cache in it ? (the reflash fixed it)
odd...
Ive attached to rooting tar ive been using with the strange (but working...) cache file...
cheers
g
Click to expand...
Click to collapse
Yes, I confirm it is definitely the cwm6-root-note2 package that messes up your device. I've checked it out - its the cause for all the problems with Mobile ODIN and Triangle Away. It breaks the cache partition on your phone ( dr.ketan ... )
The reason flashing the fixed cache.tar didn't immediately fix your problems was because you still had a messed up recovery, so you also needed to flash a recovery, which you did now again with the cwm6 package. However, your cache is again broken. So now, *again* apply cachefix, and all should be good, and you should be able to use Mobile ODIN and Triangle Away.
Chainfire said:
Yes, I confirm it is definitely the cwm6-root-note2 package that messes up your device. I've checked it out - its the cause for all the problems with Mobile ODIN and Triangle Away. It breaks the cache partition on your phone ( dr.ketan ... )
The reason flashing the fixed cache.tar didn't immediately fix your problems was because you still had a messed up recovery, so you also needed to flash a recovery, which you did now again with the cwm6 package. However, your cache is again broken. So now, *again* apply cachefix, and all should be good, and you should be able to use Mobile ODIN and Triangle Away.
Click to expand...
Click to collapse
Sorry if it was asked before but will you release cf root with cwm recovery for note2? thx
I have no plans to release anything related to CWM ever again.
Chainfire said:
I have no plans to release anything related to CWM ever again.
Click to expand...
Click to collapse
Damn :/ btw what about your root? which wouldnt have issues with ta and mobile odin
EdgaBimbam said:
Damn :/ btw what about your root? which wouldnt have issues with ta and mobile odin
Click to expand...
Click to collapse
There might be a CWM-less CF-Root coming, indeed.
Hi.
That worked perfectly. I can confirm successful flash via mobile odin once I had fixed recovery and flashed that cache fix.
Many many thanks...
George
That wud be very nice.
Thank you..
Sent from my GT-N7100 using xda premium
hi all. need help
i've been playing with different roms for couple of years now on different phones and did not have any problems.
till now that is ....
i have installed Omega 21.1, but from time to time phone would lose gsm data connection so i decided to flash something else.
installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
for some, God knows what reason, wanted to try Omega19 (4.3). installed fine but sound was broken. when ever phone used any kind of sound it would start flashing or would freeze or something. Flasing any other rom did not help. and for some reason it does not let me change modem with odin.
Last modem i have installed is XXUEMJ5.
tried to do restore using [GUIDE] Unroot/Unbrick, Flash official stock firmware on Galaxy S4 GT-I9500 & I9505 but Odin would fail with Auth error
tried with Odin 3.47, and 3.07
now i still can install rom but stops in logo loop. tried both Omega and google edition.
pls help
gec said:
hi all. need help
i've been playing with different roms for couple of years now on different phones and did not have any problems.
till now that is ....
i have installed Omega 21.1, but from time to time phone would lose gsm data connection so i decided to flash something else.
installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
for some, God knows what reason, wanted to try Omega19 (4.3). installed fine but sound was broken. when ever phone used any kind of sound it would start flashing or would freeze or something. Flasing any other rom did not help. and for some reason it does not let me change modem with odin.
Last modem i have installed is XXUEMJ5.
tried to do restore using [GUIDE] Unroot/Unbrick, Flash official stock firmware on Galaxy S4 GT-I9500 & I9505 but Odin would fail with Auth error
tried with Odin 3.47, and 3.07
now i still can install rom but stops in logo loop. tried both Omega and google edition.
pls help
Click to expand...
Click to collapse
Hi,
Once you have installed a TW 4.4.2 ROM , it installs the latest knox bootloader.
At that point , you cannot downgrade your firmware.
You said you installed [ROM]KOT49H【4.4.2】AOSP official Google Edition and it was good.
Your best bet is to re-install that.
As for the modem , there is a technique which you have to try:
Look HERE
That should help.
BTW , I edited your title
thx. will try that and report back.
nope, still stuck @ logo loop
not sure what more combination to test
tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.
gec said:
tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.
Click to expand...
Click to collapse
Hi,
Did you try the GE ROM?
gec said:
tried Omega 21.1 with
Bootloader -> BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 and
Modems -> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5
but now it does not get to the logo. shows samsung logo and than screen goes blank.
Click to expand...
Click to collapse
Try to reFlash those Files with Odin then Boot into TWRP mode and Do a full wipe and Install Omega (Inside Omega file there's Fullwipe , Click that and Setup the apps you need) then reboot .Make sure that You have a TWRP recovery^
malybru said:
Hi,
Did you try the GE ROM?
Click to expand...
Click to collapse
nope. cant find anything with that name. could you link it please?
Repulsa said:
Try to reFlash those Files with Odin then Boot into TWRP mode and Do a full wipe and Install Omega (Inside Omega file there's Fullwipe , Click that and Setup the apps you need) then reboot .Make sure that You have a TWRP recovery^
Click to expand...
Click to collapse
thx.
tried it. no success after samsung logo just goes black.
gec said:
nope. cant find anything with that name. could you link it please?
Click to expand...
Click to collapse
Hi,
You said you tried the [ROM]KOT49H【4.4.2】AOSP official Google Edition ,and it worked .
So I figured to try and re-install that one.
The other thing you must do between flashing different ROMS is a full wipe (Cache and data)
yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?
gec said:
yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?
Click to expand...
Click to collapse
The best thing you can do is flash the entire 4.4.2 stock rom via odin.And start from scratch(Recovery/Custom rom) Since you already flashed the newestbootloader (from OMEGA file) .This mean your knox is now triggered and your warranty is now void 0x01.
gec said:
yes. that was first thing i tested. at best i get the logo loop.
and yes, i do full data wipe before and after reinstallation of the new rom.
cache wipe only whe requested but in this case done that to.
is there a way to see a boot log or something to see where and why booting stops?
Click to expand...
Click to collapse
Hi,
Perhaps you should try to find the latest test stock 4.4.2 firmware ( I9505XXUFNA1) and flash it in odin.
Wipe data and cache before and after flashing.
And then wait for the official update.
At least you should have a phone you can use.
following http://forum.xda-developers.com/showthread.php?t=2265477
i've found that there is 4.3 stock image I9505XXUEMKF. downloaded it and tried to install but that did not work.
now this is a noob question but is there a speciffic bootloader, modem or something else i need to flash before flashing this image?
or should i search for 4.4.2 version?
thx
flashing stock 4.3 on current bootloader/modem combination gives me Fail from Odin and Sw. Rev. Check Fail error on the phone.
gec said:
flashing stock 4.3 on current bootloader/modem combination gives me Fail from Odin and Sw. Rev. Check Fail error on the phone.
Click to expand...
Click to collapse
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)
Repulsa said:
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)
Click to expand...
Click to collapse
So what you mean that if you leave in a country that is part of EU, It doesn't matter if KNOX is triggered? (I life in Holland btw)
KingOfDope said:
So what you mean that if you leave in a country that is part of EU, It doesn't matter if KNOX is triggered? (I life in Holland btw)
Click to expand...
Click to collapse
Click the link on EU mate . And start reading even my provider said that if the knox is already triggered, My phone still have warranty for 2 years as long its a hardware/system problem. But if i break the glass on my phone and such then i dont have any warranty for that..and must pay them for a repair.
Sent from Hell ��
Repulsa said:
I believe malybru already answer that for you .Thread and Stop experimenting with your Phone because there's a chance that you might bricked your Device or end up with no IMEI.. and Your asking for help/Solution mate so follow their instruction . If not feel free to send your Phone to customer Service for repair.( and Be aware that your warranty is already voided unless your Country is part of EU so Rooting and Flashing don't void your warranty)
Click to expand...
Click to collapse
ah, my bad. for some reason i was reading 4.4.2 as 4.2.2
i did follow all other instructions, and i thank you all for them, but still not sure where to go from here.
i know i should stick to 4.4.2 firmware but need to check somehow if bootloader/modem combination that i've install is actually installed.
gec said:
ah, my bad. for some reason i was reading 4.4.2 as 4.2.2
i did follow all other instructions, and i thank you all for them, but still not sure where to go from here.
i know i should stick to 4.4.2 firmware but need to check somehow if bootloader/modem combination that i've install is actually installed.
Click to expand...
Click to collapse
If you already flash the Bootloader from Omega then you can no longer downgrade to 4.3 stock , that's why your Getting Fail (Auth) in Odin Flash the 4.4.2 stock Leak rom for now then if you consider flashing a Custom Rom then ,flash the philz recovery 6.09.2 or TWRP (Dont forget to Nandroid backup EFS and such and then DO A CLEAN WIPE by Wiping cache, dalvik cache data and system) and From recovery flash any Custom rom you like. (no need to root your phone, Your phone will be rooted after flashing any custom rom . So goodluck
Hi,
I installed Cgen mod onto my phone, Reverted back to 4.3 firmware for Vodafone NZ from Sammobile. Used Odin, Now it is stuck at the Samsung glowing logo. So apparently a soft brick. Now i cant seem to fix it with the keis tutorials, I cant seem to get any NZ firmware. This phone was bought from a Vodafone NZ shop.. I need the firmware to flash to the phone with Odin. I have not found any that will work.
Can someone link me some firmware that will work?
Model: GT-I9505
SSN:I9505GSMH
Please can someone help, I need the phone for work tomorrow to make it even more of a mission.
Cheers
finesir said:
Hi,
I installed Cgen mod onto my phone, Reverted back to 4.3 firmware for Vodafone NZ from Sammobile. Used Odin, Now it is stuck at the Samsung glowing logo. So apparently a soft brick. Now i cant seem to fix it with the keis tutorials, I cant seem to get any NZ firmware. This phone was bought from a Vodafone NZ shop.. I need the firmware to flash to the phone with Odin. I have not found any that will work.
Can someone link me some firmware that will work?
Model: GT-I9505
SSN:I9505GSMH
Please can someone help, I need the phone for work tomorrow to make it even more of a mission.
Cheers
Click to expand...
Click to collapse
If you've flashed the firmware with Odin it should be installed. Did Odin say pass at the end of the installation? If yes, pull out the battery. Then pull in again and start in recovery. ( Vol up + Home + Power) in recovery make a factory reset. (Wipe cache, dalvik cache and data).
speedwayfan75 said:
If you've flashed the firmware with Odin it should be installed. Did Odin say pass at the end of the installation? If yes, pull out the battery. Then pull in again and start in recovery. ( Vol up + Home + Power) in recovery make a factory reset. (Wipe cache, dalvik cache and data).
Click to expand...
Click to collapse
Prompt reply, Thank you..
I am trying that now. ODIN said pass.
finesir said:
Prompt reply, Thank you..
I am trying that now. ODIN said pass.
Click to expand...
Click to collapse
In Odin you should see succeeded 1 or 3 and failed 0.
If it doesn't help do the flash process one more time and untick auto reboot. Start the phone manual then:good:
Maybe the firmware download was corrupt. In this case, download the firmware again
speedwayfan75 said:
In Odin you should see succeeded 1 or 3 and failed 0.
If it doesn't help do the flash process one more time and untick auto reboot. Start the phone manual then:good:
Click to expand...
Click to collapse
Well, I would love to thank you in person.. The hammer and mknife was about 2 minutes away.
Regards
finesir said:
Well, I would love to thank you in person.. The hammer and mknife was about 2 minutes away.
Regards
Click to expand...
Click to collapse
Therefore we are here my friend. Just use the thanks button if I helped you.:laugh:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
awesim said:
hi all.. im a beginner at installing custom roms.. i own a Samsung Galaxy S4 i9500.. a few days ago, i updated it to CyanogenMod c-11 (kitkat 4.4.4 based) ROM, then to CyanogenMod c-12 (lollipop based) ROM, so try out its new features.. however, since yesterday, my phone is not booting up.. neither is it able to go into recovery mode.. (the boot logo displays endless).. i can only go into the download mode..
so i downloaded ODIN.. and tried flashing I9500XXUFNI2_I9500ODDFNI1_INS.zip onto it.. however, no matter what i do (removing battery, restarting PC, restarting ODIN), i cannot go past the "initialization" step.. no matter which ROM i try, it never goes past the "initialization" step.. please help..
Click to expand...
Click to collapse
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Joku1981 said:
Did you try to unzip the stock ROM to receive the .tar file for ODIN?
Click to expand...
Click to collapse
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
awesim said:
yes i did.. the .zip file contains two files:
- SS_DL.dll
- I9500XXUFNI2_I9500ODDFNI1_INS.tar.md5
according to instructions in different online threads, im putting this .tar.md5 in the PDA/AP slot..
Click to expand...
Click to collapse
Change USB cable/port, other pc or close Kies 3 on the task bar.
It sounds more like a hardware failure.
Joku1981 said:
Change USB cable/port, other pc or close Kies 3 on the task bar.
Click to expand...
Click to collapse
Ive already tried changing USB ports.. I dont have Kies installed in the first place.. I'll try repeating the procedure on a different system though..
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
awesim said:
i certainly hope it is not a hardware failure.. i literally slept with the phone on charge and woke up to a dead phone.. the phone boots up into the bootloop.. the recovery mode ends in the bootloop as well.. only the download mode ends up in the correct "downloading.. do no turn off target" screen.. and odin detects the phone just fine.. but upgrading any firmware via odin gets stuck on the "initialization" step.. i can answer more questions if required.. at this point i dont care which ROM works for my phone.. or if i lose data.. i just wanna revive my phone..
Click to expand...
Click to collapse
did you solve your problem?
jkamz said:
did you solve your problem?
Click to expand...
Click to collapse
I am also facing the same problem. Were you able to solve it.
no
Buy another motherboard.that solved my problem.There is no other work around
I'm also facing same issue
Bro's, gotta start somewhere, right!
The fact that you're phones are boot looping is actually a good sign - it means that they're not totally useless but salvageable.
Question: Are you able to boot into your custom recoveries, e.g. TWRP? If yes, please reply.
If no, kindly uninstall your old samsung driver, reboot pc, install new driver, put your phone into "Download mode", connect phone to pc, run Odin & hope for the best! If you can get passed this step, then it's smooth sailing...
jkamz said:
no
Click to expand...
Click to collapse
I'm having this issue with mine today, anyone able to resolve this without going true warranty?
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
audit13 said:
Is the phone recognized by Odin? Post a screenshot of the Odin error or post the Odin error.
Click to expand...
Click to collapse
i'm facing the same problem with mine,any Fix??need help guys:crying::crying:
Odin is not working because the phone was not assigned a com port.
audit13 said:
Odin is not working because the phone was not assigned a com port.
Click to expand...
Click to collapse
He is right should be blue in com port is it latest Odin 10.7
Sent from my SM-A720F using Tapatalk
The obligatory obvious question here. Do you have the Samsung driver installed?
Just repartition the eMMC chip using .pit file with odin that it is suitable for galaxy S4 i9500.
If anyone has tried, please tell us, that it is work or not.
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Thanks!
Hi guys, i have some big problems with my n910f, tried to upload a pic to facebook and my phone crashed.
It simply does nothing, not booting, not charging, download and stock recovery are working.
I tried everything possible>
*flashed 3 different stock firmwares with odin
*tried a pit file repartion in odin
*wiped cache, did a few factory resets from stock revovery
*bought a new battery
*tried to root and flash a custom recovery but doesnt work
It is simply as bricked as it could be, the only information about this i have is stock recovery telling me unable to mount /data
So it seems my filesystem got corrupted as hell
The question is, how do i repair it?
Like i said pit file and bootloader flash did nothing, odin lets me flash everything without an error but it doesnt help.
I assume i could somehow repair it with adb fastboot but how?
Any help is welcome!
atilla88 said:
Hi guys,
Any help is welcome!
Click to expand...
Click to collapse
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
CodeNameRedNeck said:
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
Click to expand...
Click to collapse
Well i forgot to mention that i tried kies aswell, everyhting went good but didnt help, still nothing.
It confuses me a bit that it doesnt even charge, could a broken filesystem lead to this?
atilla88 said:
Well i forgot to mention
Click to expand...
Click to collapse
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
CodeNameRedNeck said:
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
Click to expand...
Click to collapse
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
ZOHUHRZED said:
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
Click to expand...
Click to collapse
i have the same problem, do you know where can we find the complete 5 files (pit pda bl csc phone) for flashing with odin?
its the only thing i haven't already tried.
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
heratis said:
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
Click to expand...
Click to collapse
What makes you assume we're all gay?
Sorry pal, i better watch my grammar, i ment guys.