Related
Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards
Hey,
Yesterday I upgraded my gf's GT540 to 2.1 (v20B) (fooled around a bit with the no-logos-showing-at-boot error but got rid of that bug eventually by KDZ software upgrade) and later I tried fixing the "can't establish a reliable data connection to the server" bug by deleting the file located at /data/data/com.android.providers.settings/databases/settings.db. After a reboot, I got stuck in an infinite boot loop of the Android logo. No matter what update I reflashed, I was stuck with the infinite Android logo. I kind of fixed that problem by adb-ing inside the phone while the loop was going on and I tried to recursively delete everything in /data/data/.
Now, no matter what update I KDZ, every boot gives me constant "The process _________ has stopped unexpectedly...". I think the files are missing but I don't quite understand why, the updates should totally wipe everything from the device and then create a new file system bla bla bla... It's like no matter how I apply any update, or do a bunch of hard resets, it doesn't do anything to the phone.
BTW I haven't tried fastboot stuff (simply because holding the camera + power doesn't take me to fastboot for unknown reasons), and I don't know about the windows enabler or where to find it.
I spent like 10 hours trying to unbrick this phone and searched everything everywhere now and I am getting really annoyed and confused with what's going on so please somebody throw me some tips before I nail this device on the wall...
Damn, everything is so much easier with HTC devices...
Thanks for every chunk of info,
Jay
You can try to do a hard-reset - http://www.hard-reset.com/lg-optimus-gt540-hard-reset.html
PS. To turn on fastboot mode you should press Power (and hold it until the phone vibrates) and then press and hold Home button. Fastboot mode is just a black screen (there won't be any text displayed).
hash87 said:
You can try to do a hard-reset - http://www.hard-reset.com/lg-optimus-gt540-hard-reset.html
PS. To turn on fastboot mode you should press Power (and hold it until the phone vibrates) and then press and hold Home button. Fastboot mode is just a black screen (there won't be any text displayed).
Click to expand...
Click to collapse
I did at least 10 hard resets.
Holding the home button doesn't give me fastboot mode, it boots Android into safe mode...
PS: Somehow I have lost the ability to use ADB, which is quite annoying.
I forgot to mention - fastboot mode works only if you've ROM with fastboot - http://forum.xda-developers.com/showthread.php?t=828003
hash87 said:
I forgot to mention - fastboot mode works only if you've ROM with fastboot - http://forum.xda-developers.com/showthread.php?t=828003
Click to expand...
Click to collapse
Thank you I have managed to get to the blue FASTBOOT screen! Now I have a device named Android in the Device Manager, but I do not have drivers for it so fastboot console application is still stuck at < waiting for device >...
The drivers for fastboot installed for me just fine using windows update. You can also try drivers from this link: http://www.speedyshare.com/files/24707580/android_usb_windows.zip or http://pdanet.co/bin/PdaNetA245.exe
hash87 said:
The drivers for fastboot installed for me just fine using windows update. You can also try drivers from this link: http://www.speedyshare.com/files/24707580/android_usb_windows.zip or http://pdanet.co/bin/PdaNetA245.exe
Click to expand...
Click to collapse
Thank you, you are the hero of the day! Now I have succeeded in flashing back the v20a firmware!!
I was trying to restore the phone to factory default and re-lock the boot loader so I could sell the phone.
I had no clue what I was doing and tried various guides and have really fouled things up.
If I power on the phone I get the screen that says "Your device software cannot be checked for corruption Lock the Bootloader" When it continues it stays on the LG Life's Good powered by Android Screen.
Is there anything I can do to fix the phone?
ElevyNJ said:
I was trying to restore the phone to factory default and re-lock the boot loader so I could sell the phone.
I had no clue what I was doing and tried various guides and have really fouled things up.
If I power on the phone I get the screen that says "Your device software cannot be checked for corruption Lock the Bootloader" When it continues it stays on the LG Life's Good powered by Android Screen.
Is there anything I can do to fix the phone?[/QUOTE
]
Did you try uppercut with LGup? Grab stock kdz from lg & lg bridge it? sounds more like a soft brick as I hard bricked mine. No screen not recognized by desktop , won't charge even a new battery.. DEAD. Hard key factoty reset is power key with volume down until first startup release power for a moment repressing while maintaining volume down bringing up recovery menu.
Until the LG won't light up at all , it's not dead.
Click to expand...
Click to collapse
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.
Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?
Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?
Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!
Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.
Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.
Sounds like the battery is dead
Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen
Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin
Ok so before I started writing this I had only one problem now I'm worried my problem has gone from bad to worse.
I updated my 6T to 10.3.2 from the latest Beta after the process it prompted for a restart, upon restarting it got stuck in the boot animation. I tried going into Recovery and Download mode unsuccessfully so I went through the forums a bit and saw that someone who had the same problem successfully entered Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on! :crying:
Has anyone experienced this or know how to fix this? Any help will be much appreciated. Tia!
theDUD3 said:
Recovery mode by pressing VOLUME UP+DOWN+POWER buttons simultaneously, I tried to do the same and my phone turned off and now it doesn't turn on!
Click to expand...
Click to collapse
These should be clarified:
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Turn the phone off, let it sit. Then try turn it back on. Any response?
try to shutdown phone ...hold vol+ and power button for like 15 sec and restart your phone if this didnt work then u can try MSM tool
Thanks guys, got it working using MSM Tool!
regarding oneplus 6 got stuck on logo screen and recovery mode not working
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
You are likely going to lose your data. Know that going in if its not already backed up.
If you have the fastboot menu you can use the fastboot roms.
Or my least favorite option or what I would try last, MSM Tool (Tmobile 6Ts use a different tool).
IMPORTANT if you want to try and recover and data off your phone first, go to fastboot, and try and "boot" the TWRP img (not the installed one, one from your PC using the fastboot command). If that works you might be able to recover data. If that does worm, try dirty flashing the last ROM you were running and see if it boots.
No worries!
frankynehemimah said:
was just going through some random stuff on my phone and suddenly my device automatically restarted and not it is stuck on logo screen. i and when i tried to open recovery mode, nope its is just not working either. i even tried the fastboot menu to open recovery settings but still no progress help me here...its urgent going though lockdown in country so no service either cant communicate with the fam also. HELP...!!!!
Click to expand...
Click to collapse
Hello, I am sorry to hear of you having this issue, I just went through 3 1/2 days (off and on) of recovering my T-Mobile OnePlus 6t which I found a way to get my unlock code within 2 weeks of having it, so I rooted it and put a custom kernel on it, stuck on 9.0 never let me update as I was not familiar with A/B partitioning, yet! The answers I saw to your questions were spot on, I just had a little to add to it and I'm sure I am not alone. Real quick let me list what has gone wrong on the rare occasion it hit the fan with the 6t...
- When I would accidentally and rarely let my battery die it seemed like it took forever to get it to reboot, I mean it sat on my desk of DOA devices for 2 weeks!
- It often seems like the buttons do not always respond properly and never have when I needed them to. Been through this before, I've bricked and unbricked and flashed and re-flashed and wiped all weekend and I like Android 10 and all but seems everything is different for every build, and everything seems to have to go in the right order with the exact right file or you wind up in a jam, period..
- That said, the previous person that answered your question has likely encountered similar, I've heard of right down to the buttons not physically working, but I have been a Smart Device Master III Technician for over 5 years, i know my buttons were not broken.
- Most likely culprit that I just handled and worked, i did have to use the MSM tool, several times - and re-unlock the BL, several times I would not even get the chance to get to fastboot, just a screen saying Build and Hardware not a match"" in yellow letters and it just bootlooped. No fastboot is no good, but when you said the tool would show some signs of working but then not, I have 2 solutions that I needed on diffrent occcasions.
1 - As mentioned fully try other USB cables, and ports, if you pull the usb-c out of the port and hold <power + vol up + vol down> eventually it will do something, very picky, sometimes gotta move your fingers to different spots on the buttons and also after 15-20sec let go of power and hit and hold it again... after a few seconds before it vibrates stick the cable in connected to your PC and the screen will be black (obv) but the msm tool will pick up on it. I know about the cables because I take good care of my phones and cables and charging ports, however on my final fix today it showed in msm tool it was connected but waiting for device.... Fed up i put the phone down and moved the usb cable a little bit and it picked up on it and did its thing! That part was just the cable, getting into qualcomm mode or w.e. is a bit tricky sometimes.
- Also someone said set it down for a while and come back to it.. THAT WORKS!! Let it fully charge and often just plugging in charger turns it on, bootloop soft brick or however have you, very simiilar to an Apple device and their DFU (don't f up mode cause screen is black..)
I hope that helps you get in touch with your family and friends.. Whatever you do, don't give up bc if you have not got it yet, you will! One other note, there are a few different msm tools available and they look the same some same size, but the one that supposed to work on my phone didn't and one that they say only a fool would attempt to try actually saved me, so if all else fails, use a different msm tool/usb cable and you will get it! I don't think I can post links yet I am on here very rarely, but plan on more! I have received so much help from XDA throughout the years on thousands of phones with just software issues alone, aas well as guides to my own phones. I would be honored to give back as I also have some extensive knowledge on many devices but I am a noob in comparison to many! Stay safe, good luck and please update and let us/ me know how it worked out for you. If i can help further I will, I have every firmware file for the OP6t, recovery, tools, software, this is not new to me but I feel your frustration!