Database Users

[ZTE Blade Q Maxi] Unlock Network

Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
To unlock your phone you should know to use SPFlashTool
must have a backup flashable with SPFlashTool of stok rom or a custom rom
you can make it with MTKDroidTools(if you dont have allready)
phone drivers must be installed
after unlocked should must rewrited the IMEI with MTKDroidTool every time you change the rom
or use via code method, can get the code in sevice for some money
you do it on your risk
you will loose the warranty
1)charge the phone at least 50%(100% is better)
2)turn off the phone
3)start the SPFlashTool, press "Format"from interface
4)chec the "formatt all flash"
5)press "Format"button and conect the phone
the format process will start(if the drivers are installed properly the process wil start without err)
when it finish you will get green OK, disconect the phone and pull out the battery to stop it to boot, then put back the battery and keep it OFF
6)press the "Download" from interface
7)sellect the Android_scatter of your backup and it will be loaded automatical with all files from backup
8)press "Download" button and conect the phone
the download process will start and the phone will be flashed with your backup
when it finish, the green OK will apear and the phone will start
if it is stuck in boot, pull out the battery, put back the battery and start the phone in recovery and doo a "wipe data factory reset"
and then reboot the phone
now your phone should be unlocked
Enjoy
Ps. i re edit this thread with a new method for unlock
that method work for ZTE Blade Q Maxi and it shoudl work for Blade Q and Blade Q Mini

Will this allow the instalation and booting of custom roms as well or just the network lock?

ohgodwhy said:
Will this allow the instalation and booting of custom roms as well or just the network lock?
Click to expand...
Click to collapse
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi

vaserbanix said:
i booted o custom rom on ZTE Q Maxi with original lk.bin file and with this new too but are not full working untill now.
it not read the internal or external sdcard, no sound on speaker, just on head set
i will post it here later to get some help if i cant fix it
so untill now this lk.bin file unlock only the network on the phone
Trimis de pe al meu ZTE Blade Q Maxi
Click to expand...
Click to collapse
Hi neighbor,...will this zip work on Q ???

pustinjak said:
Hi neighbor,...will this zip work on Q ???
Click to expand...
Click to collapse
yes will work
but i recomend you to replace the lk.bin file with one from Q not Q Maxi
find an stock rom from a virgin Q not branded and replace it
Trimis de pe al meu ZTE Blade Q Maxi

Hi ....
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3

radu.timbus said:
Doesn't work on my Reyo...
Android version 4.2.2
Baseband version MOLY.WR8.W1315.MD.WG.MP.V1.P13, 2013/10/31 16:48
Kernel version 3.4.5
Build number ORO_RO_P172D10_V3.3
Click to expand...
Click to collapse
What version you use?
Spflastool or CWM

SPFlashtool
No errors, all ok but still locked.....
vaserbanix said:
What version you use?
Spflastool or CWM
Click to expand...
Click to collapse

radu.timbus said:
No errors, all ok but still locked.....
Click to expand...
Click to collapse
You dont answer to my question.

SPFlashtool
SPFlashTool
It sais ol ok....but still locked.
Thx.
vaserbanix said:
You dont answer to my question.
Click to expand...
Click to collapse

radu.timbus said:
SPFlashTool
It sais ol ok....but still locked.
Thx.
Click to expand...
Click to collapse
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else

....
I try again right now ....
I'll let you know in a few minutes.
vaserbanix said:
Something is wrong!
I allredy have 3-4 confirmation + my phone.
You used spflash tool wich is in archive or else
Click to expand...
Click to collapse
---------- Post added at 10:24 AM ---------- Previous post was at 10:11 AM ----------
No joke....
It doesn't work.....
I used exactly the archive.... and still network locked.....
thx.
radu.timbus said:
I try again right now ....
I'll let you know in a few minutes.
Click to expand...
Click to collapse

hi...
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....

radu.timbus said:
I managed to install CWM ans S3 version you provided.... THX for that!!!!
Still locked....
And now it sais "sim card slot permanently locked"....
Click to expand...
Click to collapse
Did you read my PM?

vaserbanix said:
Unlock network of your ZTE Blade Q Maxi, Orange Reyo.....
I prepare 2 ways to do this:
1) via SPFlash_tool
2)via CWM custom recovery
First of all chek if your phone is loked by your network provider
1) Download the archive;
it have SPFlash_tool, scatter and the lk.bin file
-extract the archive where you want
-start SPFlash_tool, sellect the scatter file, chek UBOOT(if is not allready cheked) and select the lk.bin file
-click Download, conect the phone in off mode and the process should start( if not start press vol up and power untill the process start)
when it finish deconect the phone and reboot it
you should have now an unlocked phone
2)Download the patch atached
copy it on the sdcard
reboot the phone in recovery CWM custom (not stok)
-install zip from sdcard/ chose zip/(select the patch)/ yes install
when it finish reboot the phone
and you should have an unlocked phone
Enjoy
Click to expand...
Click to collapse
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.

xorti said:
I have managed to generate unlock codes for two zte blade q minis, if some one fancy to test free unlock codes please pm and report results.
Click to expand...
Click to collapse
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.

-JFK- said:
Hello,
I have try your methode on a Startrail 4 (ZTE Q).
I was just a recommendation to change the file so I have try with you Zip file in recovery but now the phone constantly reboot on the boot logo...
Any idea on how to unbrick ?
Thank you.
Click to expand...
Click to collapse
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi

vaserbanix said:
Replace the lk.bin file with one for Blade Q in the archive and flash again.
Or flash with spflashtool a lk.bin file from your stock rom
Trimis de pe al meu Blade Q Maxi
Click to expand...
Click to collapse
Where is located the lk.bin file ?
Thank you.
OK, I got it, how should I turn the phone to flash it ? Currently, I have no boot at all, can't enter recovery.

same here...did the cwm method..and not working on orange reyo .still network locked

brag288 said:
same here...did the cwm method..and not working on orange reyo .still network locked
Click to expand...
Click to collapse
if this methods doesnt work, you have to format the phone with SPflashTool and reflash a full backup with the same SPFlashTool.
i unlocked my phone with this method and it work, cant understand whay it doesnt work on all phones.
So i made an Files_to_Flashtool for each rom i ported Miui and Samsung_Note3 + one of the stok rom but modified.
i will post each one in its section
thats could be used for restoring a bricked phone too
atention is for Blade Q Maxi only

HELP ME - ZTE BLADE Q MAXI cant flash STOCK after...

i flashed this ROM
http://forum.xda-developers.com/zte-blade/general/rom-t2863932
but i dont really like it. (i dont have a problem with it, it just doesn't look like android, cant handle it, it isn't comfortable for me..)
so i tryed flashing STOCK rom via FP/SP flash tool (whatev it's name is) i tryed all versions that can be found on the website.
i cant load scatter file "ERROR: initializing scatter file failed. Please check the name of scatter file which you loaded is legal."
i repeat, i tryed all versions that can be found on the website, it wont work.
also, i did try flashing it via CWM, but error status 7 happened, (i fixed that , looked up at youtube)
then i tryed again but theres another problem, error status 6.
i also lookd on youtube to fix this but i CAN NOT do it.
please help me, i tryed everything i could...
if possible help me fix sp flash tools scatter file loading, that would be best way to flash ZTE BLADE Q MAXI stock rom
STOCK ROM can be downloaded from here :
http://download.ztedevices.com/UpLoadFiles/product/569/4045/soft/2013122509280184.zip
or here (download speed difference)
http://pc-drivers.de/zte-blade-q-maxiorange/download-653431.html (first on the list)
if any1 can find a fix, please post also your SP flasher AND edited ROM or whatev the fix is depending on.

Sry bro,.... i have everithing for stock (cwm nandroid backup,scatter for SP flash tool) but for Blade Q

[Tutorial] Meizu m2 note bootloader unlock guide

Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ

Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app

aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool

[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry

Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.

meizu os version
using os version? when you open ur m2 note bootloader? Thank you

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.

titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?

Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..

Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.

Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well

How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img

Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there

what about mx4 pro (Exynos 5430 Octa) ?

hello we are new to and TWRP custom rom ??

I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~

I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you

Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one

After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk

ZTE Blade A2 Plus Rooting( SuperSU or Magisk),Recovery & Flashing Stock Rom

Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You

MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]

Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.

MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.

Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...

I lost my IMEI after flash ROM, not able to retrieve IMEI

Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working

Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.

Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.

Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...

Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?

kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?

http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update

vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?

vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?

hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.

Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.

ZTE BLADE A602 recovery img file

Hey!
Do anyone know if there a recovery or TWRP file for the ZTE blade A602?

Hi All. I would also like to know if there is a custom recovery TWRP image for my ZTE Blade A602 running Android 7.0?
Thanks for help Greetings Werner

TWRP is now available for Blade A602!
My friend @Linux4 made TWRP 3.3.1 for ZTE Blade A602! It is pretty stable but it has some bugs:
- MTP, use adb push/pull
- Data Decryption (can't mount)
Important:
- Before you restart to system in first TWRP use, flash the dm-verity ZIP or the System will not boot anymore!
- If you want to root, please use SuperSU, Magisk will softbrick the Device (stucks on Splash and reboots to recovery)
- Do not flash official update.zip in TWRP. Idk why this happens, but the system is a bit corrupted, so use Stock Recovery (TaskSwitcher dead, lags and more)
- Format FRP doesn't work, but we'll make a FRP Bypass-ZIP soon.
If you are interested, i'll make a Debloat ZIP for A602. If you find bugs, please report!
Because this is my first Post, I can't send links, so i'll post the Links to a Telegram Channel (you can still view even you don't have Telegram):
t.me/a602_twrp_dl

Hello xda-developers,
Thanks for your response. My ZTE Blade A602 2017 for Germany (Android 7.0) is soft-bricked after a bad flash. Currently I have access through sp-flash tool and fastboot commands. Because I had no TWRP recovery on my ZTE Blade A602 I was not able to get a complete backup. So I am also searching for ZTE Blade A602 firmware/stock rom in Mediatek (MTK) SP Flashtool format. Do you have any help therefore. Can you also tell me where to download your mentioned TWRP 3.3.1 custom recovery image?
Thanks for help, Greetings Werner

Hey wlink!
If you have access to your Stock Recovery, flash the stock update.zip. If you have Telegram, I can send you the Link. I'll add Stock ROM Link to the Channel.
Can you also tell me where to download your mentioned TWRP 3.3.1 custom recovery image?
Click to expand...
Click to collapse
You have to enter t.me/s/a602_twrp_dl in your Webbrowser and then download the latest Build from Mega. But do not flash stock Update.zip in TWRP, the system will be corrupted, idk why but I also provide Stock Recovery on Mega Folder!