Zagg Glass (Contact Before You Buy) Verizon GN4 - Verizon Galaxy Note 4 General

I bought a Zagg Glass for my GN4 and noticed it would not seal around the edges.
I called Zagg and a representative told me they knew about it and the cause is the curved edges on the GN4s glass . He assured they were working on remanufacturing it.
They offered to;
1. Give me a different type, the Zagg HD.
2. Send out a replacement when the issue was resolved.
Great Customer Support IMO.
I would contact Zagg before you buy.
I am currently using a good substitute I got from the Verizon store. Cost $25
Very little if any Halo effect.
Hope this helps!

I bought it today, the vzw flex glass but haven't installed it. I will wait for my developer edition to get here. But seems to be very thin.

Thin
mrlaigle said:
I bought it today, the vzw flex glass but haven't installed it. I will wait for my developer edition to get here. But seems to be very thin.
Click to expand...
Click to collapse
Yes it is very thin, definitely thinner than the Zagg.
I have a little faith in the VZW glass. My daughter has it on her iPhone 5s and dropped it. It chipped the screen saver but not the screen.
I will probably check out the Zagg again once they get it fixed.

Related

[Q] Is it possible to fix screen scratches

So heres what happened I've had this phone since it first came out and its been kept in perfect condition. I just got a new job and left it in my pocket one day and got some dirt in there apparently. Needless to say i now have about 20 small scratches on my phone. And the reason i didnt have a screen protector on it is cause i bought a zagg one and put it on and found out that water and phones dont mix. The phones touchscreen was completely broken so I just took it to best buy and they gave me a new phone. I know i could buy a new digitizer for like 50 dollars but the scratches arnt noticeable when the screen is lit, just knowing that they are there is enough to bug me
i got 3 or 4 little ones within 2 weeks of owning the phone. similar to yours in that they could only be seen at certain angles and/or lighting situations.
I put a screen protector on to make sure to not get anymore, and it actually helped to make the other little scratches pretty much disappear.
hope that helps.
Yeah i ran to the sprint store after work today and picked up a screen protector... except i didnt realize that the protectors only cover the lcd part and not the rest of the touchscreen. It does minimize the visibly of the scratches but it just bugs me. ill just have to sell it for less when the evo 3d comes out due to the scratches.
Those Sprint branded screen protectors are terrible...truly worse than the "universal" type.
I'd check out another one of the custom-cut InvisibleShield ZAGG types. They have the textured, soft and pliable surface that may allow it to settle into the cracks and cover them up.
I'm not sure what you did when you put your first one on to make you say "Water and phones don't mix", but it sounds like you may have gone a bit crazy with the spray bottle?
TechnoBill said:
Those Sprint branded screen protectors are terrible...truly worse than the "universal" type
Click to expand...
Click to collapse
+1 bought some from Sprint after putting a big scratch on my original screen protector and it's terrible.
Sent from my Gingerbread Speedy 4G using Tapatalk
i used the ones from radio shack they work great
but to fix scratches if they are small you can get the scratch spray for eye glasses for a few dollars and use it with a cleaning cloththen apply the screen protector
Hey warstroke, do you have a specific glass scratch remover you can recommend. Cause after hours of searching on google i found displex for touch screen phones but i cant tell if its for plastic or glass. Thanks in advance for the help
Edit... So it looks like its gonna be a huge pain to fix the scratches, so im just gonna wait till my summer job is over and then buy a new digitizer and replace the whole screen. There only like 30 dollars on ebay. Apparently sand is the mortal enemy of cell phone screens.
Try out buying Otterbox's new Evo Shift case. Its great protection and comes with a screen protecter. Its $34 but definitely worth buying for the quality. You can find this on Otterbox's site.
Of course I found this after a shattered my Evo Shift. Now I have to deal with a refurbished one.

[Question] What is a good brand of tempered glass that works and effective?

So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.
I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
I have tried almost 5 brands but still did not get satisfactory result.
Just pre ordered the white stone. It was the best on the note 8.
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+
tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9
optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk
Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......
i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3
I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk
n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?
xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8

Screen Protector options

I'm just jumping from the Moto x4 to S9 Plus
My protector option is one from the ************. I really love to have my S9Plus away from the scratches. As I'm having previous experience with the ************so I'm suggesting to get one from them.
They started shipping but I didn't got mine. Have you bought one from them and received it??
I bought the one from BigBen. Fit perfectly. No problem after 1 week. Just improve screen sensitivity.
I just installed the Whitestone Dome Glass on my S9+. Very easy to install and looks great so far. It doesn't seem to be compatible with the Spigen case I bought though, particularly the lower portion, I'm going to let the glue cure a bit longer and try it again.
UPDATE: I had the dome glass installed just a bit too low on the screen. I removed the glass and adhesive, then reinstalled and made sure the dome glass was correctly centered on the screen. Works great with the case now. Highly recommend this.
Bodyguardz is a more expensive option, but lifetime warrenty. I want to say it's about 10 bucks shipping for the warrenty replacements. I got mine at AT&T when I got my s9 plus yesterday. They installed it for me but it comes with a guide thingy like the Whitestone one.
Hunkman said:
They started shipping but I didn't got mine. Have you bought one from them and received it??
Click to expand...
Click to collapse
Yes, I bought one and even I got the screen protector.
todd3835 said:
Bodyguardz is a more expensive option, but lifetime warrenty. I want to say it's about 10 bucks shipping for the warrenty replacements. I got mine at AT&T when I got my s9 plus yesterday. They installed it for me but it comes with a guide thingy like the Whitestone one.
Click to expand...
Click to collapse
Is that a TGP or Full body screen protector??
xavdep said:
Is that a TGP or Full body screen protector??
Click to expand...
Click to collapse
It's a glass screen protector. Case friendly.
Tried the bodyguards pure arc. Complete garbage. Horrible sensitivity and it's a fingerprint magnet
Sent from my SM-G965U1 using Tapatalk
I just received my spigen 360 thin fit today and this is a pretty good screen protector especially when paired with the case. The touch response is good and I don't feel the need tho enable the setting for screen protector under advanced options.
Sent from my SM-G965U1 using Tapatalk
crzycrkr said:
Tried the bodyguards pure arc. Complete garbage. Horrible sensitivity and it's a fingerprint magnet
Sent from my SM-G965U1 using Tapatalk
Click to expand...
Click to collapse
I bought one too, and concur. Fingerprint magnet, and ruins sensitivity. You have to turn on increase sensitivity in the advanced settings, and still it's a bit wonky.
bkeaver said:
I just received my spigen 360 thin fit today and this is a pretty good screen protector especially when paired with the case. The touch response is good and I don't feel the need tho enable the setting for screen protector under advanced options.
Sent from my SM-G965U1 using Tapatalk
Click to expand...
Click to collapse
I got the Spigen neo flex today and had no issues installing on both of our phones. Seems to fit very well and touch response hasn't changed.
Sent from my SM-G965U using Tapatalk
the verizon branded Tempered flass one is full adhesive. ive been pretty pleased. bumped up sensitivity on phone and no issues at all.
OMYFILM Samsung Galaxy S9 Plus Tempered Glass Screen Protector [Bubble Free] [Case Compatible] 9H Hardness Screen Protector for Samsung S9 Plus (S9 Plus, Black)
https://www.amazon.com/Galaxy-S9-Pl...rotector+for+Samsung+S9+Plus+(S9+Plus,+Black)
Amazon.com link above. $9.00
Got this on Amazon.ca for under $15 CAD, it's curved, applied with zero bubbles and it works really good after raising the screen sensitivity.
Just installed the whitestone dome, I simply couldn't be more impressed. Make sure you watch the installation video a couple of times before applying… but it is hands down the only protector i will be buying from now on for all of my devices.
http://www.amazon.com/Dome-Glass-Protector-Dispersion-Whitestone/dp/B079YF5VS7
Otao case friendly
I got the Otao case friendly version for the S9 Plus from Amazon.com (ASIN: B07BSFLLKY). Rather than give a separate review here, this is what I have added as my review on Amazon. I hope this is allowed.
I had the Otao on my S8 and was very happy with it. On one occasion I dropped my phone. The screen protector cracked, which is what you would expect from a glass screen protector, but it saved the screen of my phone.
I was a bit wary when I read the first reviews of the S9 Plus version (which had a different ASIN number) but then I heard they were updating it. They reached out to me to offer me to try the new one (free of charge) which I just received. The main complaint about the previous version was not enough glue on the edges (it is edge only sticking) but the new version apparently has more glue and it certainly has stuck well on my S9 Plus. Obviously, the proof of the pudding will be it it still sticks well after it has been on a while and I will update my review if it develops a problem.
The installation tray makes it very easy to instal.
I am using it with a Spigen Neo Hybrid case and they fit together very well.
As I said, I did not have to pay for the protector but this review is my honest opinion and, if I did not like it, I would have said so.
Just to add - the packaging recommends turning on the touch sensitivity setting in Settings but so far I haven't found that necessary.
Try this: https://www.amazon.com/Protector【Case-Friendly】Full-Coverage-Tempered-Anti-Scratch/dp/B07B2Y6F9D
dpalmer76 said:
Try this: https://www.amazon.com/Protector【Case-Friendly】Full-Coverage-Tempered-Anti-Scratch/dp/B07B2Y6F9D
Click to expand...
Click to collapse
Does the glue cover entire surface of the screen or only the edges?
I’m looking for one that covers the entire screen most I’ve seen only covers partial off the top and bottom so it still looks like there’s a screen protector. I need fill coverage from top to bottom.
Another vote for the whitestone dome!
I've tried several tempered glass screen protectors since the S6+, and they all suck because the adhesive has trouble sticking to the edges so the sensitivity is terrible. The dome is the first I've used that I'm legitimately happy with.
The installation process is really intimidating at first because the process is different from your typical screen protector. But once you do it once and get the technique down, it's actually pretty fool-proof. The tray basically ensures that the alignment is perfect and adheres well. I happened to screw up the first time because my table wasn't fully level and the adhesive didn't disperse evenly and I got a tiny bubble...so don't take that little detail for granted. Luckily they give you two bottles of adhesive, and when I moved to a level counter and put it on a second time the adhesive spread perfectly on its own and it was really easy.

Galaxy S9/S9 Plus Screen Protector Buyers Guide

Hey guys, For those of you who don't know me I have a channel GravX Reviews... I started it after becoming utterly pissed off with Tempered glass screen protectors for curved screens. Finally Found a good one for the S7 Edge in Whitestone Dome glass...But i wanted something you just slap on with no crazy installation...My channel was a result of that search... Hopefully this can help clarify and save you money ( I'm also writing this so you don't have to watch the video I am working on) The glass i talk about can rang from.20mm to .50mm in thickness..most are .33 mm.
This Knowledge is from testing over 400 kinds of Tempered glass over 4 years , needless to say i have a small idea of what Im talking about-( all from amazon-ebay or allibaba) im sure some of you will be ignorant enough to tell me I'm wrong and that glass truly is different..That's fine your entitled to your opinion .. All I'm doing is trying to help save people money and frustration- I wont try and sell you any product... Ive used the case friendly version for a long time because it was cheap and easy to pop off and on.. I noticed some touch issues...with all of them but i just got used to it.. In the end you get what ever you want. this is just here as a guide
All of these items can be bought on alibaba for 10-20cents for the edged adhesive ones in bulk...the re-sellers send them custom graphics for their boxes and then sell them like they designed it...( so stupid) kind of like zero lemons 5500 MAH battery case... its the same one as the 5500 MAH cases on ebay-
1st. Types of Glass screen protectors for the Galaxy S9/Plus or any protector for that matter..
Case Friendly ( any one that looks like this will be virtually identical to the next ( it might have thicker or slimmer black silk printing) ( which is the Black or white or what ever color they use) They also come in clear
https://www.amazon.com/Protector-Ca...9d-20&linkId=0e4c23f42c372db5a43d5221f96f8d2f
Pros-
Can be cheap
Works with most cases- But not all... UAG <<cough cough>>
Easy and fast to put on
Will protect your phone
oleophobic coating is cheap and comes off fast.
Cons
Edged Adhesive ( they will try to trick you by saying "full Coverage
Micro Dot matrix - AKA "pixel grid Technology" such a stupid term
"precision Grid matrix" "Perfect touch Grid" Its all the same stupid ****- Its placed into screen protectors that don't have full adhesive to assist in the identification of touch on the display by the digitizer panel
Re sellers grossly over charge for them and add Bull**** terms such as shatterproof...or ballistic or bulletproof...explosion proof- Anti Fingerprint ETC
2. Case friendly Full adhesive
They made cheap soft glass ones for the S8 and note 8 and they sucked...one side always had air bubbles.
The new Version is supposedly Hard Glass- Zagg is making the Curve glass elite
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9
I have it on order and will test it when i get it next week.
Im sure if the product is good it will have more sellers... Zagg does have a lifetime warranty which cost 5 -10 dollars to ship depending where you are, which if the product is good might make a worthy investment...But time will tell
2A- Case Friendly Privacy screens-
https://www.amazon.com/Protector-Ve...9d-20&linkId=ea6e28cfd2269ce9a43cb5ecdab9a914
Identical to the the above mentioned case friendly ones but with an extra layer of Privacy Film ( which makes it thicker
They all have edged adhesive and they are all the same product..Nothing special between sellers- NO MATTER what they say
3. Full Coverage Screen Protectors ( otterbox will sell an Alpha glass version of this that might be cut Short like the Galaxy Note 8 Version...But its the same thing...just a few inches shorter ( all pros and Cons Apply)
So many of these flood the market and they are all the same garbage with Edge strips of adhesive ( the ones for the S9 / S9 plus have thicker bands of edged adhesive...but it will still cause issues..
https://www.amazon.com/Protector-Co...9d-20&linkId=4e1080c6fdae78ae656456b35cc76aae
Pros-
Covers your entire display
Cheap
Easy to put on
Cons
Doesn't work with a lot of cases
( it does work with Casemate ToughStand and ToughMag)
Sellers overcharge for the same ****ty product ( while adding flashy words like Bullet proof or 11 lbs of protection)
Will have touch issues with the screen due to edged adhesive ( it works OK..but some people will notice a degradation of sensitivity
Micro Dots
4. Full Coverage Full adhesive
This is the same as the regular full screen one before but with Full adhesive according the seller
https://www.amazon.com/Improve-Sens...9d-20&linkId=dd8fec54bddaa1443f4d9fc10dee4983
All the Pros as the Full screen Coverage version... Just with " Full screen Adhesive"
Cons if the adhesive is truly full screen would only be case compatibility
5. Case Friendly UV Glass kits ( whitestone Dome Glass and Alibaba Generic Kit)
Whitestone- https://www.amazon.com/Protector-Gl...9d-20&linkId=bdf7dd57946aa39b9e1d31c7b35156df
Alibaba Generic ( you need to buy 10 minimum order to get them
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.30.466f2b24loSX3N
UV KIT
Pros- Japanese Glass All the above use Chinese glass - Yes you can See and feel a difference -
Crystal Clear - no Micro Dot)
Oleophobic coating is high quality and can last up too 6 months depending on usage
Hydrophobic coating can last even longer.
Sealed due to the LOCA adhesive used , meaning no water or dirt can get under the glass
Cons
Expensive
Complicated installation
Easy to mess up
If you get dirt under it your screwed
Cannot be replaced after curing is done ( well..it can but its not worth the headache cleaning it up)
If done wrong and the safeguards aren't in place you can get adhesive in your speaker grill ( use the Speaker covers included)
The whitestone Kit while a lot more expensive then the allibaba generic kit does have a warranty and Whitestone is actively involved in customer satisfaction- they were the first to market this..
White stone has the Speaker Cover stickers which are an awesome touch and requested feature by alot of us. I dont know if the Generic One has them.. I didn't see it on the Images and they supplier has not answered me yet... Since the seller is the factory that makes them for whitestone it should - i think its shaddy AF that whitestones Factory Supplier is selling the Dome Kit unbranded and at a huge price difference...but i cant say im surprised.
If i missed anything please let me know
I didn't include FILM protectors..because they are useless and i didnt include liquid coating kits becuase they are essentially snake oil and will help with water and fingerprint resistance at the most... I will however be testing these products too see if they change in the past 3 years. I hope this helps you guys! Feel free to drop by the channel and show some love and support ( only if you want )
GravX Reviews
Are there any good glass without dot matrix for those with extra Whitestone LOCA or DIY LOCA?
Cheaper UV light solution aka whitestone dome from china can be found here, and you can buy only one if you want, not 10 minimum like alibaba.
Also full screen adhesive protector aka the Zagg curve elite can be found for half the price here as well.
I bought both and will report back after i receive them.
https://www.amazon.com/gp/aw/d/B07B...l+adhesive&dpPl=1&dpID=41RhK1whyLL&ref=plSrch
This looks legit? The generic whitestone from alibaba charges too much to ship here. She charges me $21 for shipping! How much was your shipping cost?
xterminater07 said:
https://www.amazon.com/gp/aw/d/B07B...l+adhesive&dpPl=1&dpID=41RhK1whyLL&ref=plSrch
This looks legit? The generic whitestone from alibaba charges too much to ship here. She charges me $21 for shipping! How much was your shipping cost?
Click to expand...
Click to collapse
Don't get the one you linked from Amazon. That one only covers the flat part of the screen. I had something similar on my S7 Edge and you can see the rainbow effect along the edges of the screen protector.
The one on Aliexpress is $29 with UV light and $25 without. I might consider trying it.
yoyobabyyo said:
Don't get the one you linked from Amazon. That one only covers the flat part of the screen. I had something similar on my S7 Edge and you can see the rainbow effect along the edges of the screen protector.
The one on Aliexpress is $29 with UV light and $25 without. I might consider trying it.
Click to expand...
Click to collapse
I don't mind it not covering the curved part because no protector will, even whitestone doesn't cover the curved edges, but if it's full adhesive, you should not see rainbow right?
---------- Post added at 11:08 AM ---------- Previous post was at 11:02 AM ----------
mahdibassam said:
Cheaper UV light solution aka whitestone dome from china can be found here, and you can buy only one if you want, not 10 minimum like alibaba.
Also full screen adhesive protector aka the Zagg curve elite can be found for half the price here as well.
I bought both and will report back after i receive them.
Click to expand...
Click to collapse
The curved one from aliexpress is same as the curved one on amazon I linked. Both stops short of where the curve is. I wonder if the Zagg is the same?
xterminater07 said:
I don't mind it not covering the curved part because no protector will, even whitestone doesn't cover the curved edges, but if it's full adhesive, you should not see rainbow right?
---------- Post added at 11:08 AM ---------- Previous post was at 11:02 AM ----------
The curved one from aliexpress is same as the curved one on amazon I linked. Both stops short of where the curve is. I wonder if the Zagg is the same?
Click to expand...
Click to collapse
Sorry. I wasn't being clear enough in my description. What I mean was that the screen protector doesn't cover the edge screen where it starts to curve down, only the part where it is completely flat. When you swipe to bring out the edge panel, you will have to run your finger up the edge of the screen protector, like a speed bump.
I figured that was the case, probably same vendor as the amazon one as they all come out of China.
GravX said:
I didn't include FILM protectors..because they are useless and i didnt include liquid coating kits becuase they are essentially snake oil and will help with water and fingerprint resistance at the most... I will however be testing these products too see if they change in the past 3 years. I hope this helps you guys! Feel free to drop by the channel and show some love and support ( only if you want )
GravX Reviews
Click to expand...
Click to collapse
Thanks for this excellent write-up. I'm curious why you say film protectors are useless? I have been using ZAGG's invisibleSHIELD HD Clarity on my S7 and found it to be excellent. In particular, I use a thin case (Ringke) which only provides a slight recess for the screen. So when I've dropped the phone square on the screen, I've noticed that in spite of landing on pebbles or rocks, the invisible shield took the brunt of the force and eventually "healed" itself (warped back into shape) with no damage to the glass.
I've been contemplating moving to a hard glass screen protector for a while, but have been very pleased with the level of protection I've been getting from these invisible shields. What are negatives versus glass?
The invisshield seems to curve around the glass for their note 8 one so maybe their s9 one will curve as well? They use a full adhesive method but without the plastic placeholder and at $20 ish. I haven't ordered one yet. Hoping Gravx can compare it to the other protectors out their. Guy might send one out for review to Gravx if he asks for one.
Video version with curve elite
Curve elite Hands on
I should have my phone today
So I'll start the glass videos soon
I saw you mention the whitestone uses Japanese glass. Does the generic full adhesive glass from Ali use Japanese glass?
rlatjs17 said:
I saw you mention the whitestone uses Japanese glass. Does the generic full adhesive glass from Ali use Japanese glass?
Click to expand...
Click to collapse
This is what was listed in the description:
2.Made from the highest grade Japan Asahi Glass, our multilayered screen protectors are made with polished, rounded edges and provide 99.99% HD Clarity and Touch Accuracy.
Click to expand...
Click to collapse
Their product looks exactly like Whitestone's.
I got the Zagg installed on my phone at Best Buy today and i hadn't noticed till I got home at night that it doesn't really cover the edges all the way
BiigDragon said:
I got the Zagg installed on my phone at Best Buy today and i hadn't noticed till I got home at night that it doesn't really cover the edges all the way
Click to expand...
Click to collapse
I don't think any of them actually do. That's why I don't like the black boarder. I ordered a Bodyguardz to try
Sent from my SM-G955U1 using Tapatalk
Removing my Whitestone after the curring process and cleaning it was fairly easy. Soaked the glass in 70% isopropyl alcohol for an hour or so. I was easily able to scrape the glue off with my fingernail. Soaked it a bit longer and then used a microfiber clothe soaked in the alcohol to further clean it and get more adhesive off. (all adhesive was removed) Reapplied the screen protector with the 2nd bottle and it went on perfect. YMMV
Do not buy this product
Despite following the instructions to the letter this product did not sit flat on my phone , rather it only stuck in the middle.
I strongly advise to avoid the invisibleshield glass cover for s9+ and wait for something better to come along. Do NOT buy
Zagg is honestly a RIP off. They always lie and use marketing bs. A ton of large youtubers over 1mil subs have proven this multiple times. I'm surprised the community at xda one of the more knowledgable forums out there keep buying it. Not to mention our own GravX doing some good comparisons for us.
Save yourself the $50 and the $15 shipping replacement.
Here is the Klearlook tempered glass. I have provided photos and I will update about the touch sensitivity experience along with if the glass stays onto the display or if it has cracked. In my limited experience, the feeling of the tempered glass does feel different than having no tempered glass. The glass is compatible with the Spigen Rugged Crystal Slim Clear Case. It does appear to be similar or exactly like the Caseology glass since it comes with that installation protector.
Edit: It is a pixel dot matrix screen protector. So far, I haven't noticed any touch sensitivity issues yet but I will continue to update.
Edit 2: Touch sensitivity hasn't been an issue for the past few days so far. I also used pointer option in developer tools and I didn't see any dead spots. Tempered glass hasn't cracked. Oleophobic coating is not good. Tempered glass is very reflective and can make scenarios such as looking at the phone for navigation to be a visual challenge.
Edit 3: It has been a few weeks since I have owned the screen protector. It has not cracked or lifted. I haven't had issues with touch sensitivity (keep in mind I have increase touch sensitivity option on). Seems like a dust magnet. I will continue to use this tempered glass as the positives out weights the negatives. In the end, it protects my phone and it has not got in the way of my touch screen experience.
Edit 4: I dropped my phone at the gym with a case on and part of the top is chipped. The rest of the screen's integrity is in tact. Oleophobic coating is considered decent.
Edit 5: A few months since I have owned the phone and tempered glass. After I dropped it from the gym, I replaced it with a new one. I only have touch screen issues sometimes (typing on keyboard). The tempered glass has not peeled off. It has not randomly cracked. Decent to poor oleophobic coating. You can see the finger prints easily. Not difficult to see when using it as a GPS.
https://www.amazon.com/gp/product/B07B2PV9Q2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
MacShark said:
Here is the Klearlook tempered glass. I have provided photos and I will update about the touch sensitivity experience along with if the glass stays onto the display or if it has cracked. In my limited experience, the feeling of the tempered glass does feel different than having no tempered glass. It appears this is not a pixel dot matrix tempered glass. The glass is compatible with the Spigen Rugged Crystal Slim Clear Case. It does appear to be similar or exactly like the ZAGG glass.
https://www.amazon.com/gp/product/B07B2PV9Q2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Do you hear popping noise or clicking noise when you type with this screen on? It's probably edge adhesive, and not good like the rest. To see the dot matrix, you have to look really careful.

Better Screen Protectors: amFilm vs. Whitestone Dome

I've purchased (but not used yet) the Whitestone Dome screen protector. I've seen videos of both that and also the amFilm being installed. The only difference I saw was the Whitestone had a "bridge" for holding the adhesive bottle while it empties, while the amFilm offers a fingerprint-size cylindrical weight to place over the fingerprint area to reduce the amount of adhesive between the fingerprint sensor and the screen protector.
I see other brands for curing the adhesive with ultraviolet light have suddenly popped up as well.
Thoughts on which is the best?
Sent from my SM-N976V using Tapatalk
My wife has the Whitestone on her note 10+. The fingerprint works fine for her. When I program in my fingerprint it doesn't work well at all. Usually takes 2+ times to unlock it... So I guess it depends on an individuals fingerprint on how well it works... That being said, my wife has already put a hairline crack in the Whitestone. She did the same thing with several Whitestones on her note 8. I have had a Whitestone on my pixel 2xl since it came out and haven't cracked one, while she has cracked 4. My theory is that the adhesive creates a slightly spongy layer under the glass. When the glass is pressed on (like leaning over while in ones tight pockets) , the glass can crack. My wife is an er doctor and is constantly leaning over patients putting pressure on the phone. She always turns the phone towards her leg, so it's not the impact but rather the pressure. My pockets are generally looser and I rarely sit with my phone in my pocket. I assume that is why in almost 2 years I haven't cracked one.
Think they are both similar. ymmv on the fp sensor.
i'd say go with the amfilm because its cheaper and comes with 2.
I love my Whitestone Dome on my Note 10+, but I have to admit, if I had known about the AmFilm, I might've gone that direction instead. 2 for $40 is tempting and the also offer a lifetime warranty on replacements. Just pay S&H. Whitestone charges $9.99 S&H for warranty replacements. I assume AmFilm is similar in cost.
Here's my suggestion, if you can afford to eat the $40. Keep the Whitestone and order the AmFilm.
Install the AmFilm and use it for a week. Test sensitivity, durability, scratch resistance, and most importantly, the FP sensor.
Then after a week, rip it off, and install Whitestone Dome. Run the same test. If you prefer Whitestone, leave it on. If you prefer AmFilm, you still have a spare in the box, so rip off the Whitestone and reinstall AmFilm.
Then post on here your thoughts and feelings and why you chose one over the other.
Mr. Orange 645 said:
I love my Whitestone Dome on my Note 10+, but I have to admit, if I had known about the AmFilm, I might've gone that direction instead. 2 for $40 is tempting and the also offer a lifetime warranty on replacements. Just pay S&H. Whitestone charges $9.99 S&H for warranty replacements. I assume AmFilm is similar in cost.
Here's my suggestion, if you can afford to eat the $40. Keep the Whitestone and order the AmFilm.
Install the AmFilm and use it for a week. Test sensitivity, durability, scratch resistance, and most importantly, the FP sensor.
Then after a week, rip it off, and install Whitestone Dome. Run the same test. If you prefer Whitestone, leave it on. If you prefer AmFilm, you still have a spare in the box, so rip off the Whitestone and reinstall AmFilm.
Then post on here your thoughts and feelings and why you chose one over the other.
Click to expand...
Click to collapse
Thanks for the input. My situation's a little unique. I went all out when buying this phone with a 512GB 5G Version and a 512GB card installed. I have not used a screen protector in years and my phones are always flawless - my Note 8 that I just turned in for the Note 10 looks like it's brand new still. I work in an office and I keep the phone in my front right pants pocket with nothing else ever in that same pocket. I guess I just got the Whitestone dome because I went a little nuts with this phone and I expect it to last more than two versions (I usually slip versions) - maybe the Note 13 if there is going to be such an animal - even so maybe an excuse for wasting my money. Maybe I'll even return it. Long story short the screen protector already on the phone is fine for now for me and if it ever does start to wear, I'll peel it off and then debate longer about whether or not to use the Whitestone. So in my case actually probably a waste of money. The screen protector that comes on the phone actually goes all the way around the camera hole while the Whitestone has a notch on top of it which I don't really like. Call me nuts but that's my situation lol...
Sent from my SM-N976V using Tapatalk
KruseLudsMobile said:
Thanks for the input. My situation's a little unique. I went all out when buying this phone with a 512GB 5G Version and a 512GB card installed. I have not used a screen protector in years and my phones are always flawless - my Note 8 that I just turned in for the Note 10 looks like it's brand new still. I work in an office and I keep the phone in my front right pocket with nothing else ever in that same pocket. I guess I just got the Whitestone domebecause I went a little nuts with this phone and I expect the last more than two versions maybe the note 13 if there is going to be such an animal. Long story short the screen protector already on the phone is fine for now for me and if it ever does start to wear Auto spill it off and then debate longer about whether or not to use the white stone. So in my case actually probably a waste of money. The screen protector that comes on the phone actually goes all the way around the camera hole while the Whitestone has a notch on top for it which I don't really like. Call me nuts but that's my situation lol...
Sent from my SM-N976V using Tapatalk
Click to expand...
Click to collapse
Completely understand and agree. The factory installed screen protector is much better than people give it credit for. My wife used it on her S10+ until she finally scratched it up at the beach. Sandy fingers and all that. I replaced hers with the Ringke Dual Easy Film which she loves and I've used in the past. By the way, even though the sand scratched the funk out of her factory screen protector, the glass underneath was perfect.
And I also agree about the notch. It's my only complaint about the tempered glass screen protectors. Ringke Dual Easy Film actually covers the camera, but doesn't affect picture quality. So it's really invisible.
I had use Whitestone Dome Glass for Galaxy Note9 and my current phone, Note10. I didn't have any issue so far and fingerprint works great! and they also provides lifetime warranty for every time that you request.
CBMC said:
My wife has the Whitestone on her note 10+. The fingerprint works fine for her. When I program in my fingerprint it doesn't work well at all. Usually takes 2+ times to unlock it... So I guess it depends on an individuals fingerprint on how well it works... That being said, my wife has already put a hairline crack in the Whitestone. She did the same thing with several Whitestones on her note 8. I have had a Whitestone on my pixel 2xl since it came out and haven't cracked one, while she has cracked 4. My theory is that the adhesive creates a slightly spongy layer under the glass. When the glass is pressed on (like leaning over while in ones tight pockets) , the glass can crack. My wife is an er doctor and is constantly leaning over patients putting pressure on the phone. She always turns the phone towards her leg, so it's not the impact but rather the pressure. My pockets are generally looser and I rarely sit with my phone in my pocket. I assume that is why in almost 2 years I haven't cracked one.
Click to expand...
Click to collapse
Ok maybe your wife should not be an ER doctor if she is breaking her whitestone crushing it against patients?
I will say that my wife has cracked all of her whitestone protectors, while I only just cracked the one on my Note 9 after almost a year of being break free. I am a contractor who is constantly in situations where phones get hit or impacted (I do use an Otterbox defender case while at work), she works in an office and yet still seems to be breaking her tempered protectors. often Which is exactly why I put a tempered (whitestone) protector on her phone, because otherwise it would be her display that was getting broken, and since I pay for her and my phones on my VZ account.... I need these expensive phones protected as much as possible.
KruseLudsMobile said:
I've purchased (but not used yet) the Whitestone Dome screen protector. I've seen videos of both that and also the amFilm being installed. The only difference I saw was the Whitestone had a "bridge" for holding the adhesive bottle while it empties, while the amFilm offers a fingerprint-size cylindrical weight to place over the fingerprint area to reduce the amount of adhesive between the fingerprint sensor and the screen protector.
I see other brands for curing the adhesive with ultraviolet light have suddenly popped up as well.
Thoughts on which is the best?
Sent from my SM-N976V using Tapatalk
Click to expand...
Click to collapse
I love Whitestone Dome and have used them for a long time. My brother just got the Note 10+ and his works great. I have the S10+ and it has been fine for me. I broke mine when I dropped it getting out of my car, but luckily it was just the dome glass and not my screen. The warranty fee of $9.99 is annoying, but it is better than buying a new one. I don't know anything about AM Film, but Whitestone has been around for a long time and I think we are seeing a lot of knock-offs start to come out. I would say use Whitestone because the quality is probably better.
If you shop there website, they usually have some good discounts available. My brother got his for 20% off and when I bought mine it was 30% off.
I was looking into getting the two for my new Note 10 but I heard amFilm only gives one replacement per purchase compared to Whitestone which replaces as many times as you need to. So even if you break or mess up installing your replacement, you're going to have to buy a whole new kit at regular retail cost again.
Honestly, I'm leaning more towards the Whitestone one just because it's only a few bucks more and I've heard it's more reliable than amFilm. Plus the warranty stuff I mentioned lol.
I use whitestone dome. I have since the note 8. It's credible. AmFilm is not.
Do these type screen protectors leave behind any residue when you remove them?
754boy said:
Do these type screen protectors leave behind any residue when you remove them?
Click to expand...
Click to collapse
No they do not leave residue behind. When removed the residue goes stays with the screen protector. Still clean the screen but you won't have any residue behind.
I've had to remove mine and reinstall due to bubbles forming a week after but new one is doing good now.
I have the Whitestone Dome glass.
Sent from my SM-N975U1 using Tapatalk
754boy said:
Do these type screen protectors leave behind any residue when you remove them?
Click to expand...
Click to collapse
Depends, especially if you've had it on there for a while, it will leave residue. You'll have to slowly wipe it off with rubbing alcohol.
Hello, i read about squiggles or something, some weird things happening on edges of whitestone dome due to the glue on corners after ~1 or 2 months.
Many of these comments are found on Reddit, while in this topic everyone seems to say whitestone is very good and lasted long for them.
Examples :
https://i.imgur.com/PclyW3M.jpg
https://i.imgur.com/WWtsyZH.jpg
Who can i trust? At this price i am expecting a 'flawless' screen protector.
Also, anyone tried protection that are only available with professional installation in shops? Like this kind of stuff :
https://www.youtube.com/watch?v=jkul7RZkmFw
Amfilm has been excellent so far. so far
Sent from my SM-N975F using Tapatalk
KruseLudsMobile said:
I've purchased (but not used yet) the Whitestone Dome screen protector. I've seen videos of both that and also the amFilm being installed. The only difference I saw was the Whitestone had a "bridge" for holding the adhesive bottle while it empties, while the amFilm offers a fingerprint-size cylindrical weight to place over the fingerprint area to reduce the amount of adhesive between the fingerprint sensor and the screen protector.
I see other brands for curing the adhesive with ultraviolet light have suddenly popped up as well.
Thoughts on which is the best?
Click to expand...
Click to collapse
Some people have a brand loyalty to 'Whitestone', maybe because they haven't tried other UV solutions, but more likely because they've had a positive experience with it.
What you should be aware of is that 'Whitestone' didn't invent the process, however, fair dues to them in that they have refined the process in an effort to make it as easy, foolproof and of course marketable as possible.
If you're a relatively competent person, that doesn't require the peripheral accessories that 'Whitestone' and for that matter, 'Amfilm' provides there are much cheaper, and imho just as effective products out there.
Maybe the thing to do is buy one from 'Ebay', average prices are around £3 -£5, and even cheaper on 'Aliexpress'. See if it works for you, and once you've got the principle of it under your belt, maybe then try one of the more expensive brands if not satisfied with their quality, but in all honesty, they're all just glass and UV glue.
mafy31 said:
Hello, i read about squiggles or something, some weird things happening on edges of whitestone dome due to the glue on corners after ~1 or 2 months.
Many of these comments are found on Reddit, while in this topic everyone seems to say whitestone is very good and lasted long for them.
Examples :
https://i.imgur.com/PclyW3M.jpg
https://i.imgur.com/WWtsyZH.jpg
Who can i trust? At this price i am expecting a 'flawless' screen protector.
Also, anyone tried protection that are only available with professional installation in shops? Like this kind of stuff :
https://www.youtube.com/watch?v=jkul7RZkmFw
Click to expand...
Click to collapse
Every phone I have used whitestone on any phone they look like yours a few months in. Guess I will keep rocking factory samsung screen protector for now
oneandroidnut said:
Every phone I have used whitestone on any phone they look like yours a few months in. Guess I will keep rocking factory samsung screen protector for now
Click to expand...
Click to collapse
More reason to use the cheaper alternatives, since £3 every 3 months or so isn't such a huge hit, even cheaper than those TGSP with the glue on the edges.
Unfortunately the factory fitted screen protectors are only good for scratch resistance, best drop protection is still glass.
kxdaorbit said:
More reason to use the cheaper alternatives, since £3 every 3 months or so isn't such a huge hit, even cheaper than those TGSP with the glue on the edges.
Unfortunately the factory fitted screen protectors are only good for scratch resistance, best drop protection is still glass.
Click to expand...
Click to collapse
True but also the factory protector gets scratched easily. I use the S View cover and it is horrible, first day it got scratched on the side already and now i get scratches here and there despite being very careful.
It fits the Note so well, i wish i could find the same quality, gloss vibrant protector with no bubbles and that fits all the screen like the factory one.
I would like to try professionally installed protectors (self curing ones) but it seems that they are not really glossy on the videos i have seen.

Categories

Resources