Database Users

Gorilla Glass 4 is not so perfect. Put on a screen protector asap.

I've had my S6 Edge for a week and several visible light scratches starts to appear on the screen. I was waiting for my screen protector to arrive from amazon. And I was extra careful with the naked device.
This issue is not new. But with Samsung and Corning constantly reassure the ability of improved scratch resistance of the device. I doubt many people will not put on a screen protectors.
So, I suggest you guys put on one now, before it's too late, asap.

I have already ran into that issue some very small light scratches while waiting for my screen protector in the first week. I am extra careful also no clue where they came from.

I believe the glass has some sort of oleophobic coating on it and that is what is getting the fine scratches in it. Not that it really matters because it still looks terrible. But I don't believe the glass itself is scratching.

nudawa said:
I've had my S6 Edge for a week and several visible light scratches starts to appear on the screen. I was waiting for my screen protector to arrive from amazon. And I was extra careful with the naked device.
This issue is not new. But with Samsung and Corning constantly reassure the ability of improved scratch resistance of the device. I doubt many people will not put on a screen protectors.
So, I suggest you guys put on one now, before it's too late, asap.
Click to expand...
Click to collapse
Corning never claimed that their glass is perfect. I've got a OnePlus one with Gorilla Glass 3 that I've used unprotected for almost a year and it's still scratch free. Your glass didn't scratch itself.
Aggies1288 said:
I have already ran into that issue some very small light scratches while waiting for my screen protector in the first week. I am extra careful also no clue where they came from.
Click to expand...
Click to collapse
Usually exposure to sand.

Can you suggest me a good screen protector?

https://www.amazon.com/gp/aw/ya/ref... - Samsung Galaxy S6 Edge Matte Screen...#top
I ordered this one. It has matte finish so you can get away with fingerprints, it has healing factor to heal small scratches itself, it is edge to edge means that it will cover the entire screen including the curved parts.
So far so good. I like it.

CafeKampuchia said:
Corning never claimed that their glass is perfect. I've got a OnePlus one with Gorilla Glass 3 that I've used unprotected for almost a year and it's still scratch free. Your glass didn't scratch itself.
Usually exposure to sand.
Click to expand...
Click to collapse
I highly doubt your 'scratch free' statement. I'm sure it has small scratches on the surface but you just cant see it very clearly. As long as the glass is still softer than sands. There will be scratches.

I am using samsung galaxy s4 since 2 years without any screen guard and havent got an single scratch on screen....dont know how you ppl get it. And if you say there might be small scratches on screen, no even if u see it in bright sunlight not a single one appears

nudawa said:
I highly doubt your 'scratch free' statement. I'm sure it has small scratches on the surface but you just cant see it very clearly. As long as the glass is still softer than sands. There will be scratches.
Click to expand...
Click to collapse
Even if so, I would have noone to blame but myself. Lots of people are capable of using a smartphone for even long periods of time without scratching them up.

I had mine wrapped in clear coat. Formally ghost armor. I don't understand waiting something to arrive from.amazon.. Why not purchase one at a store and get it over with?

freemeech said:
I had mine wrapped in clear coat. Formally ghost armor. I don't understand waiting something to arrive from.amazon.. Why not purchase one at a store and get it over with?
Click to expand...
Click to collapse
Amazon: Screen Protector 5-10 dollars
My local store that sells em: screen protector: 20-40 Dollars
Thats why

There's nothing wrong with the Zagg shield front+back protector you can get from Verizon. I won't even let my phone leave the store without having a screen protector on it ... I know myself, and I know there's literally zero chance it wont get scratched.
Even if you're waiting for a better (tempered glass) screen protector ... do yourself a favor and buy something cheap while you're waiting for it to arrive. Not trying to preach or be a dink, but you can't blame the glass for scratching - blame yourself.

theresin said:
There's nothing wrong with the Zagg shield front+back protector you can get from Verizon. I won't even let my phone leave the store without having a screen protector on it ... I know myself, and I know there's literally zero chance it wont get scratched.
Even if you're waiting for a better (tempered glass) screen protector ... do yourself a favor and buy something cheap while you're waiting for it to arrive. Not trying to preach or be a dink, but you can't blame the glass for scratching - blame yourself.
Click to expand...
Click to collapse
My local store where i got my phone had no screen protector for edge devices. But im not blaming anything here. I just want to suggest you guys to use a screen protector.

chazglenn3 said:
I believe the glass has some sort of oleophobic coating on it and that is what is getting the fine scratches in it. Not that it really matters because it still looks terrible. But I don't believe the glass itself is scratching.
Click to expand...
Click to collapse
I hope so!
I see a few (scratches) on mine and I have not had this phone anywhere nor put it in a place where something could have scratched it! Compared to my other devices that have been pocketed and used a lot and those screens are flawless!
It reminds me of the camera glass on the HTC One M8. That got all kinds of crazy looking scratches and it was never touched. It was some kind of coating on the glass that caused it. And, too, it was easily rectified with some Brasso...
We're talking really tiny scratches here, completely invisible to content when viewing the screen head on. But when off, especially in sunlight, they are there. It's bothersome like when you notice a tiny scratch or ding on a new car.

I can say that I have the phone since 17th and I'm having extra careful and with direct sun light is where I can see if I have scratches or not. So on the screen I have zero scratches has I had with my s5 without a screen protector at least for 7months but on the s6 edge the screen as I said zero scratches but on the part that has the capacity buttons because it's gold version I can see there some light scratches

Same here, I'm giving the exact same usage to my S6 Edge that the one I did with my S5 and S4, both of them have only a couple of small tiny scratches but my S6E has A LOT already. I'm so disappointed at this as I never required to use an screen protector since my S4.

Got my S6e on 4/17 and so far have only a single, very faint scratch on the screen where I would have to tilt the phone in sunlight "just so" to barely make it out. I'm fairly certain I got that when I dropped my phone at the gym.
Last night I received the Cellbee "glass-like" screen protector, followed the directions as best I could... and ended up throwing the damn thing away. I made sure I was in an environment free of airflow and minimal dust, and it resulted in one of the worst finished products in my years of experience putting screen protectors on. On top of that, the surface had so much friction it felt like my finger was running on top of rubber.
Anyway, waiting for the tempered glass, or at least a standard protector with more success stories. Don't want to waste another $10.

plaxy said:
Amazon: Screen Protector 5-10 dollars
My local store that sells em: screen protector: 20-40 Dollars
Thats why
Click to expand...
Click to collapse
Don't ***** about scratches if you can't afford to spend 20$ on an 800$ phone then.

I have read somewhere that there is some glare on the edge. Anybody noticed this?

kiko3 said:
I have read somewhere that there is some glare on the edge. Anybody noticed this?
Click to expand...
Click to collapse
Around the edges? Ya it's there but you get used to it after a day or so.

To those who kept the pre-installed screen protector on. How's it holding up?

Looking to purchase a OP5 here soon. After seeing a few reviews/unboxing videos, I find it pretty great that OnePlus provides a pre-installed screen protector on the OnePlus 5.
While I know it isn't on par with a tempered glass protector, I like the idea of avoiding the hassle of after market protectors and sticking with the pre-installed one. With that in mind I'm curious to hear how the pre-installed protector is holding up for those who opted to keep theirs on.
Thanks for the input!

Had no problems, does what it is supposed to do.
Using a case that closes and covers the screen now but for the 1st week or so I had nothing but the pre-installed protector on which bore the brunt of my keys and other items depositted into my pockets with the Oneplus5..
Don't know about others but it does appear to be a glass screen protector.

It's definitely not glass, that's the first thing. It's fine. Scratched easy, doesn't repair itself. After a few months it'll probably look like a mess but I'm happy it came with one. You can even scratch it with your nail if you feel like trying that out. If it was really great, people wouldn't be trying out all the terrible 3rd party protectors, none of which pass anyone's test so far.

Mine still looks new and holding up well, but the damn thing is a dust magnet. I've never seen anything like it. Got my phone 2 days after launch.

That's what I figured. I know it won't feel as good to the touch as a glass protector but with the new rounded edges that phones have these days, getting a solid glass protector installed with 0 flaws is proving to be impossible. I've experienced this myself with the Pixel. With the S8, I didn't bother with a protector because of how rounded the screen is and the fact that I'm simply leasing it from T-Mobile. However, the S8 already has some nasty scratches in the screen from standard usage. It's brought me to the realization that if I buy another phone outright, a screen protector from day 1 is still a necessity to keep resale value high.
Glad to hear that the pre-applied protector is going to be adequate for at least a few months. I'd rather have to deal with some dust collection and scratches in the protector than scratches on the physical screen on a phone I intend to sell at some point.

The pre-applied screen protector works ok. Obviously not as good as a tgsp but its much better than the bare screen. I left mine on my 1+3 which I had for about 9 months until I sold it to upgrade. Screen was still in excellent condition. Keep it on until when ever a proper tgsp comes out

What brand is tgsp? I just received my rhino shield but haven't installed it yet. The factory one is holding up fine for me. Given, I haven't dropped it yet, so I really can't give an opinion.

ultramag69 said:
Had no problems, does what it is supposed to do.
Using a case that closes and covers the screen now but for the 1st week or so I had nothing but the pre-installed protector on which bore the brunt of my keys and other items depositted into my pockets with the Oneplus5..
Don't know about others but it does appear to be a glass screen protector.
Click to expand...
Click to collapse
What case are you using?

Pre-installed one works fine for me until now.
Tempered glass protectors, those that are available online are really unreliable atm, so unless you want to keep a knife or diamond cutter in your pocket, this protector will do just fine

A few minor scratches appeared on it since now a month I have my OP5 but the original screen protector is holding in place very good.
Only drawback for me, the plastic of this pre-applied protector is a dust and fingerprint magnet (as opposed to the glass screen protectors)

sn0warmy said:
That's what I figured. I know it won't feel as good to the touch as a glass protector but with the new rounded edges that phones have these days, getting a solid glass protector installed with 0 flaws is proving to be impossible. I've experienced this myself with the Pixel. With the S8, I didn't bother with a protector because of how rounded the screen is and the fact that I'm simply leasing it from T-Mobile. However, the S8 already has some nasty scratches in the screen from standard usage. It's brought me to the realization that if I buy another phone outright, a screen protector from day 1 is still a necessity to keep resale value high.
Glad to hear that the pre-applied protector is going to be adequate for at least a few months. I'd rather have to deal with some dust collection and scratches in the protector than scratches on the physical screen on a phone I intend to sell at some point.
Click to expand...
Click to collapse
And oh boy will you want resale value to be high. I sold my 3T for $430 (Bought for $479) before I bought the OP5 on launch day. It should keep value quite well as long as it remains in mint or very good condition.

My screen protector bailed ship after 2 weeks, it peeled off on a corner and from there it got worse. I ripped it off and have been happy since although I'm trying to find a good tempered glass replacement. One thing I noticed only after I removed it is how much dust the original protector had on it. It's a pure dust magnet. So that problem is gone too now.

My OP5 factory install screen protector had a small scratch in it within the first week. On my previous screened devices I'd always used these type of protectors (Tech Amour being my preferred brand) compared with the OP5's was very low quality. I'd recommend leaving it on until better protectors become available.
I've replaced my OP5 protector, after several weeks, with the Orzly tempered glass screen protector and followed the application advise from a user who didn't have any of the issues mentioned about that brand. It's been a week since I've applied it and I've not had any of the issues some have had. I'm very happy with the Orzly and am unlikely to go back to a plastic film protector assuming this one lasts as it is now. See the OP5 Accessories threads for your best discussions on the pros and cons of various protector brands.

Very well actually! I'm quite happy with it and will keep it until it breaks or peel off which does not look to be the case anytime soon. Surely, I dislike the fact that fingerprints keeps being present on it but it's something that gets easily wiped off in my pocket or with my shirt. The protector also enables my fingers to glide on it quite well. So, for now, no need for me to buy a Phantom Glass or something like it. \o/

It sticked fine.. No air gaps on corners

campfred said:
Very well actually! I'm quite happy with it and will keep it until it breaks or peel off which does not look to be the case anytime soon. Surely, I dislike the fact that fingerprints keeps being present on it but it's something that gets easily wiped off in my pocket or with my shirt. The protector also enables my fingers to glide on it quite well. So, for now, no need for me to buy a Phantom Glass or something like it. \o/
Click to expand...
Click to collapse
HatRiGt said:
It sticked fine.. No air gaps on corners
Click to expand...
Click to collapse
I've had the same experience. This is one of the best I've used. The oleophobic layer is great, whenever I pull it out of my pocket it's clear.
All the tgsp I've ever used (except for this brand I cannot remember for my nexus 6p) would have been smudged up and had rainbow glass by now.

MrWilsonxD said:
I've had the same experience. This is one of the best I've used. The oleophobic layer is great, whenever I pull it out of my pocket it's clear.
All the tgsp I've ever used (except for this brand I cannot remember for my nexus 6p) would have been smudged up and had rainbow glass by now.
Click to expand...
Click to collapse
Ah! I do remember seeing some glass screen protectors that had a rainbow effect when wearing sunglasses in my car. I don't have that effect on the stock one.

On my OP3 I took the screen protector off after 2 days because it got immensely smudged but on the OP5 which I've had for a month now the screen protector is still on. It seems to be made of a lot better quality so no reason yet to peel it off.

aenews said:
And oh boy will you want resale value to be high. I sold my 3T for $430 (Bought for $479) before I bought the OP5 on launch day. It should keep value quite well as long as it remains in mint or very good condition.
Click to expand...
Click to collapse
Yeah, with all my previous unlocked phones, I always put a screen protector on the phone immediately after unboxing. Which has allowed me to always sell the phone to cover almost all of the cost of the new one I wanted to purchase. I'll be keeping the pre-applied protector installed on the OnePlus 5 until a solid TG protector is released without issues.
I have absolutely no issue having a scratched up screen protector, knowing that the screen underneath is still perfect.

I left the stock protector on, but it scrathed to he** already. Even though i NEVER put it in the sam epocket as my keys.
Still waiting for a tempered protector that doesnt suck...

[Question] What is a good brand of tempered glass that works and effective?

So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!

Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.

I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).

There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.

I have tried almost 5 brands but still did not get satisfactory result.

Just pre ordered the white stone. It was the best on the note 8.

Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+

tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.

Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?

xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk

Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......

i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3

I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.

Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8

Credit card case, screen protector, and recommendations for single-handed operation?

Just bought the S9+ coming from an S5.
With the curved screen I'm guessing that's it's very important to get a tempered glass screen protector that fits and a case that is confirmed to match?
- I want to get a case like this (but for the S9+) to carry my cards:
https://www.amazon.com/Silk-Galaxy-Wallet-Case-Protective/dp/B07B4J9SQB
- I also want to get a tempered glass screen protector that will work with such a case and not pop out or anything because it doesn't fit inside the edges of the case.
- Lastly, this is my first massive phone at 6.2". I have small hands, so what can I get to help with one-handed operation? Maybe something like this?
https://www.amazon.com/TORRAS-Rotation-kickstand-Universal-Smartphone/dp/B01N5LZE3F

I have the spigen slim armor cs case. It's held up very well. I like that another company sells a compatible belt clip. That's gold. For me.
https://www.amazon.com/Spigen-Galax...cs+s9+plus&dpPl=1&dpID=41J7xCe1ZlL&ref=plSrch
I use the whitestone dome glass. Pricey, but well worth it. I strongly suggest watching the videos a LOT before trying it. I messed up the first try, but nailed it the other 2 times. Their warrenty is better than other companies. 10 dollars to get a replacement if it breaks, and you don't have to mail back the old one. Just re-submit your Amazon receipt, a picture of the damage, and they usually ship within a day and takes 2 days to show up.
Not only that, but it holds up much better than the ones with just glue on the edges. I drop my phone a lot and they literally just pop off. One suggestion on the whitestone. There's a 2 pack for 15 dollars more. I'd grab that so you always have a backup. I'm currently waiting for my replacement, and have a cracked protector. I wish I'd thought of it personally.
The one downside to the dome is its not compatible with all cases. Even with the Spigen, the case is only a hair taller than the glass. Which means that if it lands on a corner, it'll crack the protector. Overall though, many drops that would crack or pop off the junk screen protectors doesn't on the whitestone.

Cheap Aliexpress Loca Screen Protectors

I ordered a $2.15 LOCA tempered glass screen protector on Aliexpress. Purchased 08/28 and received it today 09/17. I live in San Francisco. Overall the quality of the screen is pretty much the same as the Whitestone. This one doesn't come with the plastic alignment case that the Whitestone comes with, but you get a UV light and single bottle of glue. I used the same procedure as Whitestone but just without the guide. Also you don't get any tapes to protect the USB ports, etc. I just cut some packing tape and covered those up. I did ok, there is a small air bubble at the bottom. I hope it slowly cures over time. My experience with Whitestone is that you don't want to push and squeeze too hard. You can barely notice it when screen is on, but I'm kind of OCD so I ordered another and may swap it.
So if you have experience and can wait (Note 10/10+ comes with a screen protector), save some money. BTW, finger print works just fine.
Aliexpress Link

is that an Spigen tough armor case?
cheers

Same experience. Nothing fancy, but it gets the job done. Just tape over the speakers. There are some on ebay for a similar price if you don't like using Ali for some reason.
Whitestone and AMFILM are good if you need to be spoon fed.

*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.

Mr. Orange 645 said:
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Click to expand...
Click to collapse
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk

gordec said:
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.

Mr. Orange 645 said:
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Click to expand...
Click to collapse
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk

gordec said:
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.

Thanks. Bought one to try.
Sent from my SM-N975U using Tapatalk

Mr. Orange 645 said:
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Click to expand...
Click to collapse
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.

gordec said:
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
Click to expand...
Click to collapse
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.

Mr. Orange 645 said:
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Click to expand...
Click to collapse
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.

gordec said:
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
Click to expand...
Click to collapse
I installed Whitestone on my N10+, but bought a pack of Ringke as a back up. Crack the Whitestone, I can install the Ringke while waiting on a replacement.
But, I think what I'll do is next paycheck, I'm going to order the AmFilm LOCA screen protector and run a little comparison.
I've used Whitestone for a month now and am pleased, but I do think it made the FP sensor less accurate But I'll remove it and install the Ringke and see how I like it, especially with the fingerprint sensor.
I'll use that for a couple weeks then install the AmFilm tempered glass one and compare it to the others.
It means a waste of $40, but in the name of inaccurate anecdotal science, why not? And if I decide I prefer Whitestone after all, it's just a $10 replacement under warranty to go back to it. I'll post my results in a thread here, maybe with some pictures.
Sorry, I know that had nothing to do with your lifting edges. Just thinking out loud. And by out loud, I mean in silence and just typing it.

The lifting edges of ringke, when I installed on my s10+, I found it best to work them down initially then just wait a while before trying again. I waited around 30 mins to 1hr after fitting it and found they stuck down easily.
I struggled with the 1st protector so discarded it but using the waiting method, the 2nd protector sides stayed down.

If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.

Just installed one myself that came from aliexpress. It turned out fine but was a bit disappointed that the glass is curvy on the edges like an s10 rather than being "boxy" so the edges are a bit exposed. Can't be bothered though to buy another one and go through the installation again as it took quite some time to get it done. Fingerprint is working fine, just press the fingerprint area while curing for the first time.

ajsmsg78 said:
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Click to expand...
Click to collapse
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?

fusiondynamics said:
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
Click to expand...
Click to collapse
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.

what is the price this protector?
protector price,?

ajsmsg78 said:
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
Click to expand...
Click to collapse
What do you use, just water or lightly soapy solution?