Hi,
I just rooted my phone today, a LG Optimus L7 (P700). I then installed ROM Manager, installed CWM and installed the latest ROM of Cyanogenmod.
Well that went all fine. Although it seems like my data is still left on the internal storage. The biggest problem is that I cannot make calls.
"No mobile networks available."
I neither have been prompted to enter my PIN.
Anyone here knows how to get this working?
Thanks in advance!
I solved this problem by installing v10Baseband.zip from CWM.
Very happy!
CM10 = v10
CM10.1/CM10.2/CM11 = v20
Related
Hello everybody.
I have successfuly installed CM7 RC0 ROM and it looks very promising.
However I encountered a problem: I can't turn on WiFi. Every time I try to turn it on it writes me Error (under SETTINGS -> Wireless&networks).
I tried rebooting the phone and the result is every time the same.
Thank you all for the help!
Is this still the case? There is new build 7002 which works perfect for me. Did you tried the newest Nightly build? There were troubles with Wi-Fi driver in the past.
I tried to load old stock of LG E400, however, it gave me some error at final stages. Now, the phone is working except two issues:
1: The USB is not working at all, neither for charging not for data transfer i.e. the phone is not detected on computer.
2: The graphics are not good as it should be. I guess its operating at 8bits or so.
I tried Voume Down, Home key and power, but no help by resetting it to default.
I tried Volume Up, Home and power, but i don't know how to proceed once it shows notice screen. I am not sure how to proceed or restore a new stock ROM or load a custom ROM since the recovery is not installed nor the device is rooted.
The current ROM is V10b.
Please help!
amjadakmal said:
I tried to load old stock of LG E400, however, it gave me some error at final stages. Now, the phone is working except two issues:
1: The USB is not working at all, neither for charging not for data transfer i.e. the phone is not detected on computer.
2: The graphics are not good as it should be. I guess its operating at 8bits or so.
I tried Voume Down, Home key and power, but no help by resetting it to default.
I tried Volume Up, Home and power, but i don't know how to proceed once it shows notice screen. I am not sure how to proceed or restore a new stock ROM or load a custom ROM since the recovery is not installed nor the device is rooted.
The current ROM is V10b.
Please help!
Click to expand...
Click to collapse
graphic error is sometimes because of firmware incompatibility with new released phone if im not mistaken
about your phone not detected
have you ever tried to uninstall the driver then reinstall and make sure that you enable usb debbuging
and if the debbuging works then i suggest you upgrade to other latest firmware because v10b is too old
Thank you for replying. I did tried uninstalling and installing, it did not help. However, I tried flashing 10E and it helped in fixing the USB issues. However, my graphics still not fixed, even i tried installing a custom ROM but still graphics are not fixed
EDIT: V10F fixed the graphics problem in the stock ROM however, in the custom Rom, its still not working. Trying V10H stockrom and trying to install the custom ROM to verify.
jsarunotres said:
graphic error is sometimes because of firmware incompatibility with new released phone if im not mistaken
about your phone not detected
have you ever tried to uninstall the driver then reinstall and make sure that you enable usb debbuging
and if the debbuging works then i suggest you upgrade to other latest firmware because v10b is too old
Click to expand...
Click to collapse
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
amjadakmal said:
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
Click to expand...
Click to collapse
you should trying with v10n t-mobile
htn2205 said:
you should trying with v10n t-mobile
Click to expand...
Click to collapse
May I get the link for the v10n, please.
amjadakmal said:
The spectrum and other rooting hacks for LG - E400 only works upto V10C stock rom.
Click to expand...
Click to collapse
I have LG-E400f-V10f as a baseband version, and I rooted successfully with spectrum.
@amjadakmal, what error did you receive in the final stage of KDZ-Flasher?
What version of KDZ-Flasher are you using?
Hi guys,
I rooted my s4 (I9505), installed a custom recovery and went on flashing cyanogenmod (the official 10.1.3 RC). Everything seems to run just fine but CM does not find my Wlan network. It shows other networks though.
I thought maybe it is a CM bug so I tried the 4.3 google edition rom but I have the same problem there.
After reverting to a stock rom wlan works perfectly again
So I flashed CM again after a full wipe but the problem persists.
My SGS2 never had problems with my wlan at all (also running CM)
Does anyone have any idea what could be wrong?
Thank you in advance.
I do have the exact same problem
I own a Galaxy S4 Intl. i9505
i put CWM on it to install cyanogenmod 10.1.3 RC1
the device is able to scan the networks, but not even that reliable.
first i tried connecting to my wifi network using WPS. but that didn't work
then i manually put in my passphrase. it stored the network but didn't connect. neither automatically nor manually.
rebooting the device and/or turning off/on wlan doesn't work.
Is there a way to see some log files, or follow the system, what it tries to do and where it might get stuck?
baseband version: I9505XXUBMGA
question. is the solution maybe flashing another radio firmware?
cheers.
http://forum.xda-developers.com/showthread.php?t=2020336 This is where i got all the zip which i flashed (radio, bootloader, PA ROM, and GApps)
So there are two problems I have noticed after flashing my nexus with paranoid android.
The biggest one is that my phone cannot get any cellular service. The phone just shows No Service, and when i tried to set mobile network manually it told me to insert sim and restart while already having a sim card in the phone. I tried removing and inserting it again to no avail.
The second one is that I can't use my camera, it opens the app for like half a second then it shows "Can't connect to camera" and quit abruptly.
Everything works just fine when I flashed the backup stock ROM, including the mobile data and camera
Are there known solutions to these problems?
wolverine060 said:
http://forum.xda-developers.com/showthread.php?t=2020336 This is where i got all the zip which i flashed (radio, bootloader, PA ROM, and GApps)
So there are two problems I have noticed after flashing my nexus with paranoid android.
The biggest one is that my phone cannot get any cellular service. The phone just shows No Service, and when i tried to set mobile network manually it told me to insert sim and restart while already having a sim card in the phone. I tried removing and inserting it again to no avail.
The second one is that I can't use my camera, it opens the app for like half a second then it shows "Can't connect to camera" and quit abruptly.
Everything works just fine when I flashed the backup stock ROM, including the mobile data and camera
Are there known solutions to these problems?
Click to expand...
Click to collapse
Same here... can't get SIMcard working and camera is indeed showing "Can't connect to camera"
I'm on cwm recovery
using PA3.99 downloaded from http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.99-RC2-20130920.zip
and gapps downloaded from http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.3-20131024-signed.zip
I had PA on my (now sold) I9000, I like PA to feel @home on my brand new Nexus 4
so, any hints would be welcome... :fingers-crossed:
[edit]
on TWRP it's working...
[edit]
on TWRP it's working...
Click to expand...
Click to collapse
Oh my god. Did you flash radio and bootloader as well?
Hello all.
I have an LG E610 L5 and was trying to update my CM11 9.1 to 9.3 (per the three-step instruction at http://forum.xda-developers.com/showthread.php?t=2519448). After installing the latest beta with CWM and all going smoothly, when the phone finally boots up the touchscreen doesn't seem to work. In other words, I can't get past the SIM lock.
Tried wiping cache, but it didn't help.
I had the same problem with TeamOPTIMA's CM port, but PecanCM's 9.1 was usable. Does anyone have any ideas what I could try to get it to work?
addendum edit: downgraded back to 9.1 backup, touchscreen works again. Either I do something wrong while updating (followed the instructions in the linked thread), some app is going haywire or my E610 has some strange issues with 9.3...