Q&A for [MOD][OCT 21] MultiROM v29
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][OCT 21] MultiROM v29. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flash Drive not appearing in MultiROM
Having some problems here...
I successfully installed Lollipop on my external flash drive, messed around with it for a bit then I deleted it. The problem is, now when trying to do install PA 4.6 (not sure of the version), the usb drive isn't even appearing in MultiROM as an option. At the same time though, it's available when I load my current ROM (KK 4.4.4). Any ideas as to what my be going wrong? (Tried multiple drives, refreshing).
Edit: Think I've figured it out. Reformatted it to exFat and it's working now (was pretty sure I'd used NTFS before, but guess I was mistaken).
Hi guys
My download speed is very slow
I want to download the ubuntu touch image by download manager
How can I have the link of ubuntu touch images to download with download manager?!
Cm11 install the microsd(32) from galaxy s4, can someone tell me if this ROM will fill al avaliable space con the microsd?
Big problem with MultiROM v29
Edit: SOLVED
OnePlus One - Yellow screen after MultiROm
Hi,I now installed your MultiRom but when my device booted up my screen is again yellowish as before OTA 38R Is there any solve to this or it's just me .. ? :/
NightMean said:
Hi,I now installed your MultiRom but when my device booted up my screen is again yellowish as before OTA 38R Is there any solve to this or it's just me .. ? :/
Click to expand...
Click to collapse
It just happened also on my device, I think it's a patched kernel problem. Can anyone help us?
Guys I want to eliminate the internal ROM and use only the secondary ROM.how can I do that? I tried to swap primary ROM with secondary ROM from twrp but I haven't enough space..<br />
<br />
Inviato dal mio Nexus 4 utilizzando
Inviato dal mio Nexus 4 utilizzando Tapatalk
Update within Multi-Rom
Hi guys, i hope this question hasn't been asked too many times but there are over 100 pages, I looked through a bunch but didn't see it asked.
I have the Google Nexus 5 and it came with 4.4.4. I rooted and all the other good stuff, downloaded multi-rom and tried out some roms, everything works great I found a 5.0 lollipop stock rom that I'm happy with and would like to continue using for now via multi-rom.
I recently just had a pop up on my phone saying System update available to 5.0.1, my question is can i download and install this update even though I'm running multi-rom? Is there anything I need to know before doing it?
I appreciate any help.
Thanks!
USB-OTG is un-seletable in twrp-multirom.
Hello,
I am having problems mounting USB-OTG drives using multirom v30. When I go into the mount option in TWRP USB-OTG is un-selectable and refuses to mount my usb drive. I have tried multiple usb drives to no avail, it simply will not let me select USB-OTG in the mount options. Any help is appreciated.
I take it no one views this thread! It sucks, I have less than 10 posts and can only post here. I am still having this issue if anyone is interested in helping. I would like to install all of my secondary rom's onto an external usb drive. This is supposed to be possible in multirom but I cannot get this to work...
kingedgar said:
Hello,
I am having problems mounting USB-OTG drives using multirom v30. When I go into the mount option in TWRP USB-OTG is un-selectable and refuses to mount my usb drive. I have tried multiple usb drives to no avail, it simply will not let me select USB-OTG in the mount options. Any help is appreciated.
Click to expand...
Click to collapse
Ubuntu as main ROM
I've noticed there's special kernels for different versions of Android, but can I use Ubuntu Desktop as my main ROM?
I already have Ubuntu Desktop 13.04 installed on my Nexus 7 (2012) and I would rather not lose all my data and changes I had to make for it to work properly, however, I would also like to be able to use Android.
videogame57 said:
I've noticed there's special kernels for different versions of Android, but can I use Ubuntu Desktop as my main ROM?
I already have Ubuntu Desktop 13.04 installed on my Nexus 7 (2012) and I would rather not lose all my data and changes I had to make for it to work properly, however, I would also like to be able to use Android.
Click to expand...
Click to collapse
Tasssadar said:
3. Ubuntu Desktop
Ubuntu desktop for*Nexus 7*has been discontinued and is no longer updated. 13.04 is the last release.
Download Ubuntu 13.04 image from*here. Put the image in the memory of N7 or to USB flash drive and go to recovery. Select Advanced -> MultiROM -> Add ROM and choose "Ubuntu" as ROM type. Then select the Ubuntu's image and confirm. Clean installation of Ubuntu is 1.5gb big, and takes a while (10 minutes?) to install.
The first boot takes a bit longer, and 13.04 stays a while (30-60s) in console ("Enter login:") before the GUI shows up, so just wait a while.
Ubuntu ROM must not have spaces in name!*
Using Ubuntu on N7,*Frequently Asked Questions
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2011403
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
ikslawlok said:
http://forum.xda-developers.com/showthread.php?t=2011403
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
Click to expand...
Click to collapse
That wasn't helpful at all, you just quoted how to install Ubuntu Desktop as a SECONDARY ROM.
I suppose it doesn't matter, because I formatted my device to have CyanogenMod 11 as the PRIMARY ROM.
But what I wanted was to have Ubuntu Desktop as the PRIMARY ROM, aka Internal.
videogame57 said:
That wasn't helpful at all, you just quoted how to install Ubuntu Desktop as a SECONDARY ROM.
I suppose it doesn't matter, because I formatted my device to have CyanogenMod 11 as the PRIMARY ROM.
But what I wanted was to have Ubuntu Desktop as the PRIMARY ROM, aka Internal.
Click to expand...
Click to collapse
So you are on the wrong thread. Because it is not related with MultiROM.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
ikslawlok said:
So you are on the wrong thread. Because it is not related with MultiROM.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
Click to expand...
Click to collapse
I am not on the wrong thread, I asked a question clearly pertaining to MultiROM, note the use of the terms PRIMARY and SECONDARY ROM.
You clearly have no idea how to answer my question so please stop attempting to.
Oh yes, I was not even awake.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
---------- Post added at 06:47 AM ---------- Previous post was at 06:40 AM ----------
videogame57 said:
I've noticed there's special kernels for different versions of Android, but can I use Ubuntu Desktop as my main ROM?
I already have Ubuntu Desktop 13.04 installed on my Nexus 7 (2012) and I would rather not lose all my data and changes I had to make for it to work properly, however, I would also like to be able to use Android.
Click to expand...
Click to collapse
"main ROM" Does it mean Primary ROM ?
If you have already install Ubuntu, What's the problem to set it as default ROM ?
---------- Post added at 07:28 AM ---------- Previous post was at 06:47 AM ----------
In MultiROM, There are only two types of ROM : Primary & Secondary.
As your question is not enough explicit, I try to understand.
Do you want to use Ubuntu Desktop as primary ROM and have some Android ROMs as secondary ?
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
According to http://forum.xda-developers.com/showthread.php?p=57992634,
videogame57 said:
But what I wanted was to have Ubuntu Desktop as the PRIMARY ROM, aka Internal.
Click to expand...
Click to collapse
you seems want to have Ubuntu Desktop on primary ROM, and Android ROMs as secondary.
It is just NOT POSSIBLE.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
ikslawlok said:
According to http://forum.xda-developers.com/showthread.php?p=57992634,
you seems want to have Ubuntu Desktop on primary ROM, and Android ROMs as secondary.
It is just NOT POSSIBLE.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
Click to expand...
Click to collapse
Nothing is impossible, now please stop trying to answer questions about something you don't seem to understand fully.
---------- Post added at 07:04 PM ---------- Previous post was at 06:55 PM ----------
kingedgar said:
I take it no one views this thread! It sucks, I have less than 10 posts and can only post here. I am still having this issue if anyone is interested in helping. I would like to install all of my secondary rom's onto an external usb drive. This is supposed to be possible in multirom but I cannot get this to work...
Click to expand...
Click to collapse
I feel your pain, nobody here is helpful at all.
I'm going to have 10 posts by the time I'm done here though.
You can install Ubuntu Desktop without MultiROM.
That is the only way.
Envoyé depuis mon Nexus 6 (DU Shamu 5.0.2 LRX22G v9.0 UNOFFICIAL) en utilisant Tapatalk
Related
Today on sam firmware, a new ROM is avaliable for P1010, I downloaded and tested, the news? New Lockscreen, Face unlock and a Photo Editor. Only these things.
Link: http://www.sammobile.com/firmware/?page=3&t=3&o=1&m=GT-P1010&r=1#regiona
I think this is the last update... Maybe, with soo luck... Samsung port Google Now(I guess not) well, if anyone here see another new, tell here.
Edit: Theres a new firmware from China, not tested.
Quickly tested, flashed it with odin from kpi without wipe : seems smoother at first glance.
I hope for a working cf-root soon ;-)
Envoyé depuis mon GT-P1010 avec Tapatalk
My p1010 is dead. I don't know how! The battery was 3%~4% and I turn off the screen and try to turn on, but the tab doesn't wanted to turn on, I tried to use force reboot, plug on odin, all these things and nothing happens, anyone has this problem?
Did you try to let it charge for an hour then long press on/off button?
Envoyé depuis mon GT-I9100 avec Tapatalk
riorim said:
Did you try to let it charge for an hour then long press on/off button?
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
Yes, in fact I let the tab charging for 6 hours, 6!!! And this s*** doesn't want turn on. Well, this is the signal for buy a Nexus 7 fast.
Ohhhh. Where is p1000 value pack update! Huhuhuhu
Sent from my iPad using Tapatalk HD
samcortez said:
Yes, in fact I let the tab charging for 6 hours, 6!!! And this s*** doesn't want turn on. Well, this is the signal for buy a Nexus 7 fast.
Click to expand...
Click to collapse
I have mixed feeling about n7 : really worth it? I don't want to be f..ed up like I was on this p1010.
Envoyé depuis mon GT-I9100 avec Tapatalk
riorim said:
I have mixed feeling about n7 : really worth it? I don't want to be f..ed up like I was on this p1010.
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
Of couse man! Here my reasons:
-Tegra 3, very, very better than p1010.
-Updates by Google, that means you will have update in one month.
-A loooot of developers
-Nice screen
-Cheap
-Jelly Bean.
-Cheap
other things.
---Edit:
The tab is back to the normal. LOL
Flashed the new KPO software (had to do it twice). The new software has a new lockscreen and may be a little smoother. All apps worked, but no root. I tried to root with the madteam KPI CWM root and found that the WiFi and bluetooth did not work. I had done a Nandroid backup so I restrored to the KPI software. I didn't see enough of an improvement to stay with KPO and lose root.
rfb813 said:
I didn't see enough of an improvement to stay with KPO and lose root.
Click to expand...
Click to collapse
I had many stability problems with KPI (tablet freezing from time to time), with KPO those problems seem gone and I notice overall speed is much better.
Moreover I never did manage to have a working root on KPI since motafoca's CWM/cf-root caused reboots every time /system was accessed, so, all in all....I'll keep this KPO for now
rfb813 said:
Flashed the new KPO software (had to do it twice). The new software has a new lockscreen and may be a little smoother. All apps worked, but no root. I tried to root with the madteam KPI CWM root and found that the WiFi and bluetooth did not work. I had done a Nandroid backup so I restrored to the KPI software. I didn't see enough of an improvement to stay with KPO and lose root.
Click to expand...
Click to collapse
Try using the CWM's skin1980 for KPG. Overwrite the file and folder in the p1010 wifi with wifi folder present in the CWM skin1980 rom. sorry I'm still bad English
aldhi97 said:
Try using the CWM's skin1980 for KPG. Overwrite the file and folder in the p1010 wifi with wifi folder present in the CWM skin1980 rom. sorry I'm still bad English
Click to expand...
Click to collapse
Thanks for your recommendation. Here is what I did:
Originally rooted on KPI with Madteam CWM.
1. Copied WIFI (system/etc/wifi folder) from KPI to my external sd card.
2. Downloaded KPO via Odin.
3. Downloaded Madteam CWM.
4. Copied KPI WIFI to system/etc/wifi in KPO. This replaced the KPO files and wifi worked.
Now have a rooted working KPO.
Thanks again.
Will give this ago later on thanks and let you know as well if it works then happy days
rfb813 said:
Now have a rooted working KPO.
Click to expand...
Click to collapse
And no reboot each time you write something on the /system partition?
Envoyé depuis mon GT-P1010 avec Tapatalk
riorim said:
And no reboot each time you write something on the /system partition?
Envoyé depuis mon GT-P1010 avec Tapatalk
Click to expand...
Click to collapse
No! It worked the first time.
You guys need to jump on JellyBean's Bandwagon.
http://forum.xda-developers.com/showthread.php?t=1774560
nemory said:
You guys need to jump on JellyBean's Bandwagon.
http://forum.xda-developers.com/showthread.php?t=1774560
Click to expand...
Click to collapse
This is for p1000 and a Jelly Bean rom isn't soo easy.
Link in first post redirected to sammobile homepage
Sent from my GT-P1000 using xda app-developers app
Did you try from kies
Sent from my LT26i using xda app-developers app
can someone write instruction for me how to flash KPO firmware ? I'm still stuck at KPG firmware . Please teach me step by step
1.Download android x86 iso from here
http://www.android-x86.org/
2.To install arm apps on android x86 use arm translator
for that you need to download 3 libraries from Buildroid and copy them into the system folder (so make sure you select to install the /system directory as read-write while installing Android-X86!):
Since the latest Android-X86 uses an ARM translator, not all ARM applications will work, for instance, Google Chrome won't work. Angry Birds (as well as Amazing Alex) on the other hand, worked in my test using a custom Android-X86 build in VirtualBox, though it was kind of slow (probably because of VirtualBox):
I'm sure there are readers who are wondering if Netflix works with this new Android-X86 release, but unfortunately I can't answer to this question because Netflix doesn't work in my country so if you try Netflix with Android-X86 4.0.4 RC2, let us know if it works in the comments!
you can download arm translater from here
http://www.webupd8.org/2012/07/android-x86-404-ics-rc2-released-with.html
3.To install the ISO either write it to a cd or burn it to a pendrive using unetbootin or usb installer.
Oh..sad..nobody want to try this..?nobody have a net book?
Sent from my Nexus S using xda app-developers app
I tried it a few months ago on an Asus netbook
It was fun seeing it working but it's that practical as the whole user interface constantly needs "dragging" and a laptop trackpad is built for clicking
I'm giving it a go. I'm going to try running in in virtualbox and I'll check for netflix.
evcz said:
I tried it a few months ago on an Asus netbook
It was fun seeing it working but it's that practical as the whole user interface constantly needs "dragging" and a laptop trackpad is built for clicking
Click to expand...
Click to collapse
Just try it with a mouse...
Sent from my Nexus S using Tapatalk 2
thunder2132 said:
I'm giving it a go. I'm going to try running in in virtualbox and I'll check for netflix.
Click to expand...
Click to collapse
I think u cannot install it on virtual box...there is some partition error ....
Sent from my Nexus S using Tapatalk 2
I will probably try it tomorrow. Sounds like fun!
Envoyé depuis mon Nexus S avec Tapatalk
No matter how I do it, it doesn't boot on any of my laptops.
edit:
ok, now it works on my hp (using the latest asus version) and it's painfully slow. i'm going to look into it
Envoyé depuis mon Nexus S avec Tapatalk
latest
try latest version its fast and stable
The nighlty?
On my HP pavillon the rc 2 is slow. I haven't manage to boot anything on my asus a6000
edit: the brazos RC is quite fast on my hp but is not perfect (cause it is written for a touch screen)
Envoyé depuis mon Nexus S avec Tapatalk
nexussgeek said:
1.Download android x86 iso from here
http://www.android-x86.org/
2.To install arm apps on android x86 use arm translator
for that you need to download 3 libraries from Buildroid and copy them into the system folder (so make sure you select to install the /system directory as read-write while installing Android-X86!):
Since the latest Android-X86 uses an ARM translator, not all ARM applications will work, for instance, Google Chrome won't work. Angry Birds (as well as Amazing Alex) on the other hand, worked in my test using a custom Android-X86 build in VirtualBox, though it was kind of slow (probably because of VirtualBox):
I'm sure there are readers who are wondering if Netflix works with this new Android-X86 release, but unfortunately I can't answer to this question because Netflix doesn't work in my country so if you try Netflix with Android-X86 4.0.4 RC2, let us know if it works in the comments!
you can download arm translater from here
http://www.webupd8.org/2012/07/android-x86-404-ics-rc2-released-with.html
3.To install the ISO either write it to a cd or burn it to a pendrive using unetbootin or usb installer.
Click to expand...
Click to collapse
other builds to trywith arm libraries intergrated/ethernet/etc.)
http://www.tabletsx86.org
select Android-x86 Test Builds at top of page
fgdn17 said:
other builds to trywith arm libraries intergrated/ethernet/etc.)
http://www.tabletsx86.org
select Android-x86 Test Builds at top of page
Click to expand...
Click to collapse
Okay .. wow.. there must be a back-door/virus in these builds!?!
How can such an UGLY website be the only place to get working 4.2 previews for x86?!
The AOSP 4.2.1 2013-01-24 was a bit portly (182mb) but it ran like a top on my virtual PC and I'm off to try it on the laptop/carpc.
Up until now I'd been running 2.3.7 as it's the only build that would work with everything, but it's getting old fast!
How did you managed to boot it? I didn't succeed with the latest , even though I had 4.0 build up and running
Envoyé depuis mon Nexus S avec Tapatalk
Re: Home screens
its awsome! Thanks for sharing! :thumbup:
Sent from my Google Nexus S using Tapatalk 2
BenHeng said:
How did you managed to boot it? I didn't succeed with the latest , even though I had 4.0 build up and running
Envoyé depuis mon Nexus S avec Tapatalk
Click to expand...
Click to collapse
Lappy did NOT boot from it. Much sadness followed and I'm still on the hunt for any 4.x releases that will run on my older `Centrino` class laptop. I'm not expecting full support, I'd be fine with USB blue-tooth, even USB WiFi, all I want for it to do is boot with the CPU/audio/graphics chipset combo I have in the laptop.
It'd be so nice to have it booting droid native vs. only being able to run it in VirtalBox.
Athhar said:
I think u cannot install it on virtual box...there is some partition error ....
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Works with VMWare Player but just Live-CD
T.E.C.H.N.O said:
Works with VMWare Player but just Live-CD
Click to expand...
Click to collapse
yeah.....that's what i said.u can use like live cd.......but can't install on virtual drives...........
Athhar said:
yeah.....that's what i said.u can use like live cd.......but can't install on virtual drives...........
Click to expand...
Click to collapse
Jap thats exact
Hello there awesome people of xda, this is the discussion thread for Omni Rom for i9100. I decided to make this topic because of the spam that is on the development thread.
NOTE THAT BY FLASHING OMNI ROM OR ANY OTHER FORM OF CUSTOM FIRMWARE, RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER OF OMNI, TWRP, AOSP ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH THIS CUSTOM FIRMWARE AT YOUR OWN RISK.
Click to expand...
Click to collapse
Good ROM, except some kernel issues in latest nightlies.
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
xman323 said:
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
Click to expand...
Click to collapse
is not ported, its based on AOSP and also has futures like multiwindow, app swich etc.
Great ROM, been using since it first came out and using every update as available!
I wasn't one of the lucky ones where the new nightlies work, is there any update on what's causing the issues and when this will be sorted?
Thanks
Just seen the thread trying to find the issue, so don't bother answering that question!
Where can I find the battery icons
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
torned said:
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
Click to expand...
Click to collapse
thanks that save me some time
Does Camera Work okay?
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Easily one of the best custom ROM for our old S2. Really love the multi-windows feature.
issues
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Latest nightly builds must be perfect. Haven't seen anyone post here for ages, unless there is a new thread for the i9100 international?
Sent from my GT-I9100 using xda app-developers app
I Love It!
Great rom. thx Omni Team.
is there any way to turn off the light of menu & back key?
k4mr4n94 said:
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Click to expand...
Click to collapse
works
soma47 said:
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Click to expand...
Click to collapse
use a kernel that comes with a recovery like Dorimanx
hoschool2 said:
is there any way to turn off the light of menu & back key?
Click to expand...
Click to collapse
there should be an options in the Settings, Buttons or smth like that.
Camera pic to external sd
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
moula1981 said:
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
Click to expand...
Click to collapse
is hould be an option in the camera app
When multi window implement in omni kat ROM. Someone patch this to use http://forum.xda-developers.com/showthread.php?t=2567667
Q&A for [KERNEL][N4][LOLLIPOP] nash Kernel -r2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][N4][LOLLIPOP] nash Kernel -r2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thankyou
aviz1911 said:
Hey, link is fine just now checked it..
Click to expand...
Click to collapse
Your Kernel is great! Thankou
Great kernel. Best one thus far
Display isn't right after flashed nash kernel
Hi guys, I'm using CM12 unofficial for mako and flashed nash kernel r3,
Now the screen is all black, except for the menubar and the navbar,
but when I slide down from the menubar, I can see the quick toggles and notifications.
Quick press the power button twice, I can see the content of the screen, just a flash, and back to whole black.
What should I do now ?
Flash the ROM again ? Or try another kernel ?
Update :
Just reflashed CM12, it's OK now.
Hi all may this (or other custom) kernel resolve the little battery drain that I have on my nexus with factory image?
Slide2Sleep Disabled
I found out about the kernel through a reddit post on getting TouchControl-like features on Lollipop. The poster mentioned your kernel in particular because it included both dt2w and s2s. Reading through the changelog, it looks like you removed s2s. Any chance of bringing this back? I know there are at least two of us that use it. lol
Does it require wipe?
Or can I dirty flash without losing any data?
Just flashed this kernel...it'good but i have a trouble with the charge...im few words when i charge my n4 when is off the screen flash on and off and it never stop.
Can you help me please?
nash Kernel -r9 OTG
Hi,
Is there any thing I'm missing?
I have a N4 rooted with nash kernel -r9, trwp recovery and the stock lollipop system.
I have trickster mod installed, as synapse gives the UCI... message
I have an OTG cable connected to a powered usb (3.0) hub.
I am trying to get OTG working, but N4 founds no device.
Could you tell me if I've forgotten any thing?
Thx in advance!
xabier
PS. I've arrived to your kernel because It's the only one at the moment providing otg support for a N4 with lollipop installed.
PS2. I've tried the same connexion with an OTG capable device, and it worked...
xabier-bo said:
Hi,
Is there any thing I'm missing?
I have a N4 rooted with nash kernel -r9, trwp recovery and the stock lollipop system.
I have trickster mod installed, as synapse gives the UCI... message
I have an OTG cable connected to a powered usb (3.0) hub.
I am trying to get OTG working, but N4 founds no device.
Could you tell me if I've forgotten any thing?
Thx in advance!
xabier
PS. I've arrived to your kernel because It's the only one at the moment providing otg support for a N4 with lollipop installed.
PS2. I've tried the same connexion with an OTG capable device, and it worked...
Click to expand...
Click to collapse
Nexus 4 has a shortcoming where it need an external device connected to the cable to power the pen drive! So search for a OTG Y cable & you will be able to get what you need!
Sent from my Nexus 4 using XDA Free mobile app
Thanks for your answer.
I'am waiting for a Y OTG cable, and as soon I'll receive it, I'll say if that made the difference.
I thought that Y OTG was equivalent to a powered hub, as the N4 issue was related with the lack of power in the USB device, but maybe it isn't.
I assume that the rest of the things I exposed are right...
Thx again!
Sent from my Nexus 4 using XDA Free mobile app
Hi. I've flashed Nash r11 and everything is fine except the hotplug... Can you please implement back bricked hotplug? Intelliplug seems to be slower in performance. Thanks
kernel nash euphoria os
Hello, this is my first post hope its get answered.
Tried twice ,to flash nash kernel r11 for euphorias os 1.0 mako for my nexus 4, but
Without success .at first had rom ,without re-flash dirty rom, flashed kernel and ukm,then reboot. When homepage came up, there was not central and right buttons of nav bar, only visible the left back button. After my first touch everything went black except status bar and back button. Nothing else only black screen and fc of ui and system.
Tried to factory reset flash rom,gapps,nash,su,ukm reboot, same happened.
Tried fladh rom,gapps enter os, then enter recovery dirty flash rom and kernel,ukm but still the same. Dont know if i do something rom, but followed instructions by author.
Thank you
OTG
Hi
R13 is not support OTG why ?
the best kernal, whatever I was using Well done!
I'm on stock ROM, no init.d, so when I installed r14 ukm was not installed....as far as I can tell synapse is working fine though.....so is that okay then?
And I love the kernel....incredible...tweaked hotplug a little more to my liking.
Edit: I installed ukm now....still working great
sorry, but did you remove the option for battery life extender .
AW, thanks for the best nexus 4 kernel!
can annyone give alternative link r15
Can annyone help??when i click NashKernel Megapack it direct go AndroidFileHost but say access dinied
LolHacker17 said:
Can annyone help??when i click NashKernel Megapack it direct go AndroidFileHost but say access dinied
Click to expand...
Click to collapse
Fixed it
Thanks for reporting
Flash ON !!
Hey @aviz1911,
I'm on N20 and I enabled the d2tw but when I reboot the phone the parameters in sys/module reset themselves and d2tw doesn't stick. What am I doing wrong?
Inviato dal mio Nexus 4 utilizzando Tapatalk
[Q&A] [ROM][Official][5.0.2] CyanogenMod 12 Nightlies for the Qcom Intl Galaxy S4 (j
Q&A for [ROM][Official][5.0.2] CyanogenMod 12 Nightlies for the Qcom Intl Galaxy S4 (jfltexx)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Official][5.0.2] CyanogenMod 12 Nightlies for the Qcom Intl Galaxy S4 (jfltexx). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Move APP to SD
Hello everyone,
I need your help, do not get move apps to my SD card. I must make some previous operation on my SD card?
And I have a question: What is it F2FS? To be used or served?
Thanks a lot!
From what I understand, there is no support to move apps to sd on lollipop (yet)
f2fs
"f2fs: bring up to date with Jaegeuk's branch (android_kernel_samsung_jf)"
Does this mean F2Fs partition is now supported?
Will try tonight would be awesome. Ext4 is sooo outdated and slow
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
GDReaper said:
From what I understand, there is no support to move apps to sd on lollipop (yet)
Click to expand...
Click to collapse
You could try fouldermount but SuperSu is required afaik
nattanarcilla said:
"f2fs: bring up to date with Jaegeuk's branch (android_kernel_samsung_jf)"
Does this mean F2Fs partition is now supported?
Click to expand...
Click to collapse
Not working yet. Just tried it.
Miscellaneous Bug is here
So I have again this bug. How Can I fix it?
Recharge your phone and watch the overall battery life from 100 to 5%.
When it is good forget about it. If not install better battery stats.
In my experience the Battery Information is not like it was in KitKat.
I think the misc is some kind of calibration and will go away after a few recharges.
After the first install the information displayed depends on 2600mah which no battery except new ones has.
Hard to describe in english would sound more logically in my native language
Stuck in Bootloop
I'm using TWRP, I wipe data/restore factory and when I install the ROM.zip it says this:
E: unable to locate partition by back-up name: 'and-sec'
no MD5 file found
failed to mount /dev/block/platform/msm_sdcc1/by-name/system at /system: INVALID ARGUMENT
unmount of /system failed; no such volume script succeeded result was [0.200000]
After that I install gapps and I'm stuck in bootloop.
What does this mean? How can I fix it? I'm currently running CM12 by antares and alucard
.
You need to convert your partitions to ext4. Official CM12 doesn't support f2fs yet
Cozmos23 said:
You need to convert your partitions to ext4. Official CM12 doesn't support f2fs yet[/QUOTE
Ahh,if it's not a bother, can you please tell me how I do that?
Click to expand...
Click to collapse
Can I do a dirty flash from AntaresOne's build? Because I have so many apps and I don't want to reinstall all...
Inviato dal mio GT-I9505
alinmoroianu said:
Cozmos23 said:
You need to convert your partitions to ext4. Official CM12 doesn't support f2fs yet
Click to expand...
Click to collapse
Ahh,if it's not a bother, can you please tell me how I do that?
Click to expand...
Click to collapse
Download and install TWRP recovery (https://www.androidfilehost.com/?fid=95864024717068745)
Wipe->advanced wipe
Select cache->change or repair file system->ext4
Select system->change or repair file system->ext4
Select data->change or repair file system->ext4 (Warning: internal storage is formatted, make a backup of your personal data before doing this!)
Source: http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/rom-cyanogenmod-12-t2943934
I changed f2fs to ext4 obviously
Reangels said:
Can I do a dirty flash from AntaresOne's build? Because I have so many apps and I don't want to reinstall all...
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
Some people say it works, but you should always make a nandroid backup to be sure.
AntaresOne could you please fix the virtual buttons in BSPlayer? They stay on while playing video. Thank you.
Flashed this rom and its like butter! So smooth. Havent notice any bug yet. I came from Optimized build by Antares! BTW i intalled it clean Thank you so much again @AntaresOne
gapps
i've tried 3 different gapps packages and none of them worked with the nightly build from 1/20.
the apps are always crashing
Why does AndroidOS have such a big battery use?
Its the same like Display and the Browser.
No root?
I lost root when I installed this. Did this happen to anyone else?
It seems 1/22 build has battery drain issue. I reverted back to 1/21 build. I read someone posted about changing lockscreen. I have the same issue, i accidentally change my theme and now i have different wallpapers. Sounds cool but it wasnt.
NOTE: Download theme with nice wallpaper then choose it in themer. Just the LOCKSCREEN WALLPAPER and you are ready to go. (cyanogenmod lockscreen wallpaper is cool but ehemmm i dont like it.)
lockscreen weather
Hello,
On the 21-01 build, i have weather on the lockscreen but since the 22-01 bulid the lockscreen weather is missing...
Have you got the same PB?
Thanks