Im trying to get Omnirom on my A500 but i dont remember if i tried rooting once before or where i left off with my tablet since i havent used it in about a year.
I cant get it to be seen by AfterOta or Blackthund33r ICS Root.
Under about Tablet it says
Android Verson 4.0.3
Kernel 2.6.39.4+
Image Version Acer_AV041_A500_RV05RC01_PA_CUS1
Build Number Acer_AV041_A500_1.033.00_PA_CUS1
Image P/NFm.S14A0.00Y
Now idk if Im on ICS through OTA or if i went the Leak method. Ive tried almost everything i can think of but I cant get anywhere with this. I have my CPUID and SBK but im at a wall now.
How can i get AfterOTA and/or Blackthund3r root to recognize my table when plugged in ? Ive tried different USB ports, ive Installed/uninstalled/reinstalled acer drivers countless times.
Got usb drivers?? There's a minizip in my root guide. The omnirom is that an xda Rom?? If so you'll need to flash skrilax_cz patched bootloader, both flash tools can do this for u. Sometimes running the "babsector.rar" file is just as easy, it resets partitions and flashes bootloader & cwm for u too.
Remember if you are on stock, flash yr Rom directly after flashing the bootloader, boot straight to recovery and flash yr rom.
Sent from my HTC One using Tapatalk
Related
I have installed the ICS V4 bootloader and everything is fine. (it has the big PASS thing). I can boot up to HC 3.2.1 fine as well.
However, when I go to press power+volume down, I get "booting from recovery kernal image" then it switches to a picture of the android with a caution sign.
Do I have to root my device and install CWM or something? (sorry I'm still quite noob at this, I haven't rooted yet). Didn't I already install this when I installed the bootloader?
Thanks in advance!
Booting stock HC and stock ICS after installation of ICS BL overwrites recovery.
Follow civatos guide for installing ICS BL V4:
http://forum.xda-developers.com/showthread.php?t=1622425
And do all the steps.
Greetings
edit: on Moscow's advice ;-)
HalloSpencer said:
Booting stock HC after installation of ICS BL overwrites recovery.
Follow civatos guide for installing ICS BL V4:
http://forum.xda-developers.com/showthread.php?t=1622425
And do all the steps.
Greetings
Click to expand...
Click to collapse
This includes Stock ICS Roms also
Thanks guys. I immediately booted to recovery after installing the bootloader. Now I have ICS running.
If I wanted to update to the V5 bootloader, could I do it without reinstalling my rom?
You guys are awesome
jgv115 said:
Thanks guys. I immediately booted to recovery after installing the bootloader. Now I have ICS running.
If I wanted to update to the V5 bootloader, could I do it without reinstalling my rom?
You guys are awesome
Click to expand...
Click to collapse
If I'm not mistaken, I believe you can put the v5 bootloader.blob in a flash.zip and flash through CWM. That's one method. This became available as of ver4.
The other would be to run the NVFlash again you used previously, and install only the bootloader (apx?). Your CWM and Rom should remain intact.
I use Blackthund3r's flash exe to install my .bin files. (gives some funny windows error but always completes) I just toss the new bootloader.bin in the same folder as the exe app. Also the latest recovery image. Do them both at the same time.
So basically 3 methods. Also, check your new UID number and make sure you convert it to SBK like you did the last time. ICS usually changes the UID number sometimes. I usually keep all UID's and SBK's written down.
Moscow Desire said:
If I'm not mistaken, I believe you can put the v5 bootloader.blob in a flash.zip and flash through CWM. That's one method. This became available as of ver4.
The other would be to run the NVFlash again you used previously, and install only the bootloader (apx?). Your CWM and Rom should remain intact.
I use Blackthund3r's flash exe to install my .bin files. (gives some funny windows error but always completes) I just toss the new bootloader.bin in the same folder as the exe app. Also the latest recovery image. Do them both at the same time.
So basically 3 methods. Also, check your new UID number and make sure you convert it to SBK like you did the last time. ICS usually changes the UID number sometimes. I usually keep all UID's and SBK's written down.
Click to expand...
Click to collapse
Can you pm me that windows error please? I think it's to do with my mode detection code being stopped abruptly but I want to have it fixed properly for v0.3.3
Sent from my Iconia A500 using Tapatalk 2
I read and re-read the development thread for AfterOTA and I found nothing on this problem. I will outlay the steps I took. I downloaded AfterOTA lite v1.7 and connected my tab to it and saved the txt file. (I can list the full output if needed) the Bootloader was as follows:
bootloader: 0.03.0X-HC
Android Build: FLEXREAPER RF1_rv1_Acer_AV041_A500_1.031_033_041.00_CUS_WW_GEN1
I booted into Recovery and found the version number.
My custom recovery: ClockworkMod Recovery v5.0.0.0(thor2002ro rev1.3.4)
I bought this from a friend and didn't do all the modding myself which I am new to the Iconia a500 (but not new to Rooting, Romming, Recovering) so I am a little in the dark on where to go from here.
I downloaded AfterOTA 1.7 (the Full version) and clicked on the "standard" tab and chose the install "bootloader ICS v 3.14.7 + recovery thor v1.7.3" and clicked the "for 50x"
It shut the tablet down said booting into APX, did the whole thing and at the end it said "complete, you can power down your tablet with the power button and boot back up"
I powered it down it booted up fine but when I reconnected it to afterOTA it dosent read the CPuid (it just says "0") and the bootloader space is blank.
Everything works, I can use it as I normally would but I want to install the new flexreaper and thought I might as well update the Bootloader and recovery to get up to current on everything. Thank you for any help you can give me in understanding what happened and what I may have done wrong. BTW I did disable all antivirus and UAC and rebooted before running AfterOTA.
You're probably ok. You just need to flash a "real" ICS rom like Flexreaper Extreme I would guess.
When you boot your tab, you should see some text in the left corner like "Skirlax_CZ's bootloader version xxxxxx" If you do, then bootloader is probably ok. Boot into your recovery and check your recovery version.
MD
I dont have anything come up when i boot other than a big white acer logo and then it does two smaller acer white logos side by side. Then it does the android boot animation. I booted into recovery and it is thor v5 not the one i had chosen in afterOTA. I just want to know what to do from here. Should i try again or use another method?
I just dont want to flash an ICS Rom without the ICS bootloader.and is there another way other than afterOTA to check the boot loader version?
york629 said:
I just dont want to flash an ICS Rom without the ICS bootloader.and is there another way other than afterOTA to check the boot loader version?
Click to expand...
Click to collapse
Well, after ota didn't work then. You should have seen the txt immediately on boot. (the split acer tells me it's a HC modified ICS kernel in the rom).
You could try manually flashing the bootloader with NVFlash.
My theory, is that you should install the OTA/Full version of ICS. This will install the stock bootloader, then, you can run the after OTA app. Reason being, is that my theory is that the real ICS bootloader creates something the HC BL doesn't. And when you try NVFlashing the unlocked bootloader, it just doesn't take. It's been happening several times recently.
Is there a forum guide on installing the OTA/full version of ICS? Would I basically bring it to stock bootloader and ROM then use AfterOTA to flash the new bootloader and recovery? Sorry for the n00bish questions, every device seems to use different methods and when I didn't start with the thing until after someone else did the initial stuff I dont want to mess it up, this is a really nice tablet. Thanks for the help, You guys are the best on here.
Yep, you are basically taking it back to stock then using afterOTA to install the new bootloaders but most importantly get root access and a new open recovery...
Is the best way to go stock by using afterOTA? Or should I just try a different method on the forums?
It clearly states on AfterOTA's first post that it does not work on custom roms and only the OTA so yes, download the ota ruu and install it. Then run afterota and you will be able to install a custom rom after that. Or use blackthunders apx tool to update the bootloader.
yes, that was an over sight on my part, I was excited to update everything so easily. where/what is the OTA RUU ? sorry to be a pain but if you could just point me to a forum guide on going completely stock I would appreciate it. I don't see anywhere to get the OTA update.zip file I need to flash, I found this here http://forum.xda-developers.com/showthread.php?t=1113878 is this the post I need? and do I need the update or the full package? does it matter if I use the honeycomb full package if I am just going to use afterOTA to install an ICS bootloader and recovery?
I used the afterota tool to install ics bootloader and twrp 2.1.3 recovery. I have tried flashing Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip. It says it flashed but when I try to boot it never gets past the screen that says acer. Can anyone point me to a guide that can help me get it booting properly?
lawtalking said:
I used the afterota tool to install ics bootloader and twrp 2.1.3 recovery. I have tried flashing Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip. It says it flashed but when I try to boot it never gets past the screen that says acer. Can anyone point me to a guide that can help me get it booting properly?
Click to expand...
Click to collapse
Found the problem. Although I thought I flashed the ICS bootloader, I must have still been on the HC bootloader. I reflashed the ROM along with the HC kernel, and it booted up.
Hey peeps
Ok so here's what I had:
A500 with ICS unlocked bootloader, CWM 10.1 and Thor recovery.
I've upgraded to a Samsung note and now want to flick off my A500. But before I do that I need to return to complete stock. I followed another websites guide (stupid me XDA all the way!) and now ended up in a pickle!
What the other website recommended was to download the OTA ICS (which I already had) and flash it like a normal ROM. I did that and the bootloader is still unlocked and I am not able to gain root on the custom ROM to repair the recovery (which gives me the little android on his back with red "!").
So here's where things get tricky. I can't regain root because ADB isn't detecting my device. I've tried every tool in blackthunders bag of tricks and they all come back saying "Done" but they don't actually work. I do have ATX mode and fastboot.
Can someone please help me figure out how to:
Get ADB working
Load stock bootloader
Get stock recovery back?
Thanks in advance!
PS: I've tried searching the forums and followed a number of threads and how to's but none seem to work for me
Ok update on this. I'm such a moron! I removed ADB drivers and re-installed. Once I got ADB working I simply used afterota (forgot I had it!) to flash stock and then do the update.zip trick
So i have an A500 i rooted awhile ago.
It runs android 4.1.2
CM10
cwm bootloader 5.5.0 x thor2002ro rev 1.7
i think i installed it from cm10-flex_v6Supercharged_rev2.3_gappsIncl_public....
now i'm thinking about upgrading to android 4.4, as there seems to be one out for A500.
of course it says i need to upgrade my CWM to 6.0.4.5...
this file of course says i need to install Skrilax bootloader.
And skrilax says i need nvflash to install it.
so considering what i currently have installed, is this the correct and easiest way to go about installing a new rom`?
(i keep getting dizzy every time i try upgrading my tablet, because all these guides are soooo confusing, always referring to something that's not explained in the guides.)
well made it as far as getting the skrilex loader installed..
now i'm trying to fastboot in, and it returns
? fastboot
googling it haven't found any idea as to what is wrong
took a leap of faith.. the ? still allowed it to work..
duckforceone said:
took a leap of faith.. the ? still allowed it to work..
Click to expand...
Click to collapse
The ? means you have a connection between your pc and tab.
You are able to issue fastboot commands from yr pc. If you have a recovery.img file you can ' fastboot flash '.
The other way to flash a custom recovery is to use a 'flashable zip'. You could have used this method, by copying the zip to yr sdcard and booting to your cwm RECOVERY and using the flash zip option in the menu.
No matter tho, u sussed it out yrself, sweet
dibb
Sent from my HTC_PN071 using Tapatalk