I dont have any jtf box to upload it so my request is to make that sdc file compatibility for odin flash
Related
I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Guys, any one ? i Badly need the new ops file and the procedure as the phone is very unstable...
I would use the Samdroid forum, they should be able to help.
I have a Spica and it verty stable (and fast) using CM 8.3.2 and Yonip V12 kernel.
boxy44 said:
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Click to expand...
Click to collapse
1. You need spica_jc3.ops- here is the correct one (if it downloads as .ops.txt just remove .txt)
2.Firmware file should be named i5700XXJH1.tar or in a similar manner.
SS_DL.dll must remain in the same directory where .tar firmware is located
a) put the phone to download mode and connect USB cable
b)start Odin and see if the phone is found- in top left field you should se COM port number. If there isn't- check in Device Manager if drivers are correctly installed
c) load spica_jc3.ops as OPS file and firmware as One Package file
d) select OnePackage option, leave other options as they are- Reset Timer, Protect Ops and Reset Timer (300) should be selected by default
e) click Start button, don't touch the phone and PC, sti back and wait
f) when flashing is done phone will reboot, you can safely unplug USB and close Odin
The zip file in the Android dev host is invalid
Can you re-load the file?
Thanks
Youre updating via fastboot or recovery?
I recommended install as shown in leo's video
Anyway, the one in dev host is for fastboot, while in android file and ubunto one is zip flashable thru recovery..
Check MD5 if you download file correctly
zip works fine
First of all - There isnt any thread about Extracting The Complete Stock ROM from the phone, and then Creating a flashable Odin file ( Tar.md5 )
So heres my Question that can any of the XDA People give a procedure to extract the STOCK ROM from the Phone ( CSC, Modem, PDA etc ) and creating a Md5 file which can be later used.
The xda people already have procedure for you sire
http://forum.xda-developers.com/showthread.php?t=1777579
Thanks a Lot !
rvalvekar said:
Thanks a Lot !
Click to expand...
Click to collapse
You are welcome! Happy to be of help
Some questions ;
I have a CDMA Galaxy Y phone - so what all should i be dumping to create a tar file. Also Do i need to create separate csc pda and modem files ? or in Single Package i can Make a flashable tar file ?
So if i have to create separate csc pda and modem files for odin, how can that be done ?
and also if a single file - how to do that
Thanks
rvalvekar said:
Some questions ;
I have a CDMA Galaxy Y phone - so what all should i be dumping to create a tar file. Also Do i need to create separate csc pda and modem files ? or in Single Package i can Make a flashable tar file ?
So if i have to create separate csc pda and modem files for odin, how can that be done ?
and also if a single file - how to do that
Thanks
Click to expand...
Click to collapse
make sure the radio is correct (phone.csc) since that contains the telephony device drivers and you must exersise extra care,
remember most SGY roms are built for GSM/Intl. Version,
try and asking anyone with a CDMA version if they have successfully flashed a custom rom with it
http://forum.xda-developers.com/showthread.php?t=1777579
From the link above - there are several dump codes fro example system , recovery, modem etc.
I want to know
is PDA = SYSTEM ?
Modem = Modem ?
then Which dump to take as CSC ?
delete
Anyone with knox 0x0 could make a pit file and upload it here pls ?
This leaked Rom N9005XXUBMH1 have a pit file from 32 GB:
http://www.sammobile.com/2013/09/13...test-firmware-for-galaxy-note-3-lte-sm-n9005/
You can see there. Download it.
I only know make a pit file to devices from 16 GB whit the cmd attached on Terminal Emulator.
For 32 GB this cmd must be modified. I unknown how...
ValenteL said:
This leaked Rom N9005XXUBMH1 have a pit file from 32 GB:
You can see there. Download it.
I only know make a pit file to devices from 16 GB whit the cmd attached on Terminal Emulator.
For 32 GB this cmd must be modified. I unknown how...
Click to expand...
Click to collapse
thanx for the file mate...i was after the 32gb pit file also
Hey everyone i have downloaded the stock rom for htc 820 but it has no md5 file it has boot.emmcc.win file in instruction given in downloaded page they are saying that
-----------------------------------------------------------------------
place boot.emmcc.win in a folder
download unpackbootimg.exe and extract by it.
download mkbootimg.exe and pack it again.
----------------------------------------------------------------------
please help me with the same..
how to extract that file.......
This guide here may get help you some ideas:
http://forum.xda-developers.com/showthread.php?t=2746044