I flashed the new Update 9.5 yesterday with these CALIBAN-Mini-GAPPS and the drain is 16% over night (8h). I've got only whatsapp installed, no other app!
I think the batterie-fix doesn't work pretty good!
It was a clean install on my E610, wiped everything inkl. /data/media...and original build-in kernel.
Try e612 kernel.
Did you were on wifi or 3g data?
CM11 9.5 Batterie Drain FIXED....Pecan is really Great
retry to clean install
Wipe Everything...neat and clean
Use Latest Recovery
flash 1-rom...reboot
2-gapps...reboot
3-karnel....reboot
I think at first as you bur I try again with above and it give me expected result....
KAFFU.YES said:
retry to clean install
Wipe Everything...neat and clean
Use Latest Recovery
flash 1-rom...reboot
2-gapps...reboot
3-karnel....reboot
I think at first as you bur I try again with above and it give me expected result....
Click to expand...
Click to collapse
PecanCM says using cwm 6.0.4.8 no latest recovery for flashing this room.via mount and storage in cwm are you wipe everyfhing except sdcard.
Yes Full wipe...
with mounted system/date/cache....expect to boot and my SD card,
I knew about CWM 6.5 in his forum only..
by d way it works great on my E 612
cwm 6.0.5.0-link
KAFFU.YES said:
with mounted system/date/cache....expect to boot and my SD card,
I knew about CWM 6.5 in his forum only..
by d way it works great on my E 612
Click to expand...
Click to collapse
Can't find link for cwm 6.0.5.0 maybe send for my thanks.now use to cwm 6.0.4.8.
CWM 6.0.5
pancepaki said:
Can't find link for cwm 6.0.5.0 maybe send for my thanks.now use to cwm 6.0.4.8.
Click to expand...
Click to collapse
here it is....
http://forum.xda-developers.com/showthread.php?p=54943444&highlight=cwm+6+0+5#post54943444
Related
hey, i want to upgrade my ideos x5 from android 2.2 to oxygen 2.3.2 but all i get a bootloop. Solutions?
Have you tried wiping data and dalvik? Try do re-download the ROM, if not, download the stock ROM again (I suggest B138 or B163) and redo the flash.
You can download the stock ROMs and Oxygen HERE if you want. Be sure not to flash any ROMs intended for Ideos X5PRO if you have the normal Ideos. Check under the battery!
and when i installed oxygen and started to install 2.2 froyo back i had to push the sd card deeper that it would work and now i'm back to 2.2 and sd card works like a charm :S it's a 8gb sdhc thanks for the stock roms link btw and i will try to install oxygen again later if someone could make me an step by step manual
I think i will backup my froy to internal sd card just in case.
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
naamakala12345 said:
I wipe dalvik and cache and now i'm stuck in huawei logo... but i can still access cwm recovery.
Guess i can't get oxygen for my phone......
Click to expand...
Click to collapse
Are you using 5.0.2.6 recovery? Whipe data as well. Sometimes you need to flash the rom twice.
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
naamakala12345 said:
Yeah i have that, and i allways wipe the data before i flash it and i have flashed it several times but it just doesnt seem to work
actually i have cwm 5.5.0.4
Click to expand...
Click to collapse
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Try out Version : V100R001C00B528G001
--------http://forum.xda-developers.com/showthread.php?t=1369296
~02.03.2012~ 【U8800】 2.3 Official Update 【Latest】
--------http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyNTU=
I'm gonna try the recovery out and let you know
cokratex said:
5.5.0.4 and 5.0.2.7 is for .35 kernel roms and 5.0.2.6 and 4.xxx are for the old .32 roms. So install this recovery: 5.0.2.6
and then whipe again, to be sure, and flash oxygen again.
Click to expand...
Click to collapse
it worked thanks!!
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
LilSasa said:
If you get stuck at the logo screen try using a different compilation of CMW.
If you meet bootloop try wiping cache and Dalvik cache.
Click to expand...
Click to collapse
okay i will try it, anyway what are other compilation of CMW?
AldRezaine said:
okay i will try it, anyway what are other compilation of CMW?
Click to expand...
Click to collapse
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
anasdcool71 said:
There's oneby skins and one by madteam. Search and you'll find it. Btw, flash to stock rom using Odin (if you're on a custom rom) before flashing hyperion.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Still not working. I already flashed back to stock rom but failed.
vangeodee said:
after flashing DXLF1, try flashing EVO-X2.1 first then Hyperion (that's what I did). I used Merruk's CWM it has a much cleaner interface. :3
Click to expand...
Click to collapse
It works but when I install Link2Sd app my phone reboot itself and stuck in the boot screen.
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
I will give it try and see if it works..
I don't think your supposed to use Link2SD?
Ohhhh leave it try to flash ussrv6 it's awesome man very smooth fast and stable than hperion...
Sent from my GT-S5360 using xda premium
Ramdan2478 said:
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
Click to expand...
Click to collapse
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
wipe dalvik cache
AldRezaine said:
Thanks sir....it works.... hehehe but i have one problem..., whenever I install an application software like chainfire3D, link2sd, swapper and kind of application which install in the phone memory.., my phone restarts and nothing is installed....
Click to expand...
Click to collapse
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Ameya0909 said:
wipe dalvik cache
Click to expand...
Click to collapse
Already did sir a million times but still problem persist..
vangeodee said:
Link2SD and App2SD requires EXT3 partitioning on your SD card so you can have an extension of your phone memory on your SD card.
Swapper does the same, you need a nameless partition that your phone can put swap files into so as to reduce RAM usage.
Chainfire 3d requires plugins to properly function. It may be installed but not functional due to the fact that you may not have installed any plugins.
So link2sd ad swapper requires partitioning (theres a guide for that) and chainfire 3d requires plugins (google it)
Click to expand...
Click to collapse
Thanks sir for sharing your knowledge but I think already know about it...
AldRezaine said:
Downloaded HYPERION Final Build 6, flashed to my SGY(stock rom and kernel:S5360_DXLF2_OLBLG1_DXLF1) using CWM with success and then choose to reboot the system but stuck in boot screen.
I leave my phone and waited for several minutes but still no joy. Used Odin 3.65 to recover the system and restore the stock rom and then flash again the HYPERION ROM but still no luck.
Please help guys....
Click to expand...
Click to collapse
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
yehs14 said:
it also happened to my SGY,
This is what I did - (hope this will help)
1. Flash your SGY to baseband DXLF1/DXLF2 via odin
2. Root it.
3. Reboot to Recovery Mode --> do data reset at wipe cache (2x each)
4. Flash Hyperion via CWM
5. After installation, still in CWM go to advance --> reboot recovery --> then flash kernel via CWM
6. After kernel installs, do data reset, wipe cache 2x AGAIN, then --> go to advance --> wipe dalvik 2x also
7. Then REBOOT (wait 2-4mins until cellphone fully starts)
Click to expand...
Click to collapse
What kernel Im going to flash...? HYPERION has built-in kernel already..
hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
noamp0 said:
hello everybody
im kinda new her so be cool with me
i'v just installed cm10.2 latest version on my nexus 4 4.3 ver, and i'v restarted the phone, and after he worked properly and smoothly before that restart, he writes me "Unforrtunetly, System UI has stopped." after i click OK another one comes and over and over..
iv installed the latest cm nightly version, i realy need ur help!
Click to expand...
Click to collapse
Did you wipe data/factory reset in recovery before you flashed the rom?
22sl22 said:
Did you wipe data/factory reset in recovery before you flashed the rom?
Click to expand...
Click to collapse
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
noamp0 said:
yea of course!
perhaps i should meantion that in the guide it says that this part of wipeing data should take time but at my case id didnt pass the 30 sec..
Click to expand...
Click to collapse
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
22sl22 said:
Wiping data shouldn't take long at all. When people say wipe data/factory reset when changing roms it doesn't mean wipe the whole sd card. Do you have the latest recovery version? For CWM it is 6.0.3.6 or 6.0.3.7. For TWRP it is 2.6.3.0
The correct procedure is:
Wipe data/factory reset (NOT sd card)
Wipe cache/dalvik cache
Install Rom
Install Gapps
Install SU (optional)
Reboot
Click to expand...
Click to collapse
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
noamp0 said:
yeah i have the CWN 6.0.3.6 version, and i did it all according to this procedure except the dalvik cache wipeing and that SU? (what is it exacly)?
u think i should do this all over again? maybe it will fix somthing... also ive notice that a new cm version (20130922) is out and mine is 20130921..
what are u saying? i would prefer not to do it cuz iv already manged all my apps and settings on the phone
Click to expand...
Click to collapse
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
22sl22 said:
Redownload the ROM. Once you've downloaded just install it and wipe cache and dalvik and it should be fine.
Su, in full, Super SU is root made by Chainfire. The normal one in cm is made by Koush but you don't need to flash the Chainfire one, only do that if you have root problems
Sent from my Nexus 4
Click to expand...
Click to collapse
i dont have any root problems so that fine, and ill try this and edit!
EDIT: it didnt work.. iv installed the new CM ver and after deleted cache and dalvik as u sayd and still not working properly..
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
bbanana said:
U should flash stock rom, after that flash your cm rom again,your issue will be solve. Good luck.
Sent from phone's neighbor wife at dreaming place
Click to expand...
Click to collapse
r u sure it will solve it? or can i try another thing as last resort before i wipe all/?
EDIT: and another thing, if u can give a link to the stock rom ill be glad!
i realy need ur help, im realy stuck here..
i tryed wipe all and istall the new CM ver and still not working..
how do i flash that stock rom??
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
iPain said:
Hey
i intalled TEAM WIN recovery 2.6.3 and for some reason it says "xperia D"
how can i change it? thanks!
Click to expand...
Click to collapse
whaT WAS the zip file u flashed to install TEAM WIN
sunnysays said:
whaT WAS the zip file u flashed to install TEAM WIN
Click to expand...
Click to collapse
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
iPain said:
dunnu it says teamwin v2.6.3.0 i remember i flashed xperia d rom for defy plus
Click to expand...
Click to collapse
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
sunnysays said:
In order to get your TEAMWIN u need to flash defy_twrp_recovery_2.6.3.0.zip
Click to expand...
Click to collapse
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
iPain said:
will do thanks
and another thing... i flashed quarx 4.4.2 ROM via this guide https://www.youtube.com/watch?v=tJ3KVp09ixE
and i always lose signal no metter where i am it happends for few minutes - hours - even a day!
what can i do to fix it?
Click to expand...
Click to collapse
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
sunnysays said:
i guess that bug is been fixed in the latest nightly ... flash the new nightly from this link
Click to expand...
Click to collapse
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
iPain said:
just need to flash it or wipe something? after the flash i need to wipe cache and davlik?
Click to expand...
Click to collapse
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
sunnysays said:
you need to do a wipe cache and wipe dalvik cache after your install rom and gapps
Click to expand...
Click to collapse
installed your twrp but still i see the xperia d logo
iPain said:
installed your twrp but still i see the xperia d logo
Click to expand...
Click to collapse
Installation Instructions coming from stock
If you are coming from stock OS (must be rooted with CWM) or an old build of GB, ICS, or JB then flash "defy_twrp_recovery_2.6.3.0.zip" from the links under downloads.
Wipe /data, /cache, and /system in TWRP or use defy_safewipe.zip
Flash ROM
Flash Gapps
Reboot
So guys I installed the CM11 KK Rom by Psyche almost a month ago,
And it's great! [emoji6]
But the problem is,
1)I messed up with the GAPPS and can't restore it without format
2)I want CM7.2 back because of various reasons. [emoji28]
So,
As the title says,
How do I downgrade back to CM7.2 without Odin??
I had tried once, but got SD Mounting issues. [emoji29]
Any help is appreciated! [emoji6] [emoji106]
Just flash the cm7 bieltv3 kernel in cwm with system mounted
Reboot to recovery
Format system data cache
Mount system data cache
Flash cm7 rom zip
Restart
Have you tried it bro??
Didn't get any SD Card Mounting issues??
Saurabh Kamble said:
Have you tried it bro??
Didn't get any SD Card Mounting issues??
Click to expand...
Click to collapse
With the cm7 by bieltv3 - not a port or a themed version of its base
I went back & forth between cm11 & cm7 when I was testing
Never had any problems
marcussmith2626 said:
With the cm7 by bieltv3 - not a port or a themed version of its base
I went back & forth between cm11 & cm7 when I was testing
Never had any problems
Click to expand...
Click to collapse
Thank you so much bro! [emoji6] [emoji8] [emoji1]
marcussmith2626 said:
Just flash the cm7 bieltv3 kernel in cwm with system mounted
Reboot to recovery
Format system data cache
Mount system data cache
Flash cm7 rom zip
Restart
Click to expand...
Click to collapse
Bro i just tried the first two steps,
I.e - Mounted System and all other partitions,
Flashed the CM specific kernel and rebooted into recovery.
But the kernel didn't chance and i'm still on CM11 kernel.
Nothing happened.
Please help.
Saurabh Kamble said:
Bro i just tried the first two steps,
I.e - Mounted System and all other partitions,
Flashed the CM specific kernel and rebooted into recovery.
But the kernel didn't chance and i'm still on CM11 kernel.
Nothing happened.
Please help.
Click to expand...
Click to collapse
Flashed fine with me
You can always try flashing hells fusion #50 first - its a stock based kernel but supports ext so you can flash that then a stock based rom or then try flashing bieltv3 kernel
If all else fails you will need to use odin
Tysm for the help bro...
Saurabh Kamble said:
Bro i just tried the first two steps,
I.e - Mounted System and all other partitions,
Flashed the CM specific kernel and rebooted into recovery.
But the kernel didn't chance and i'm still on CM11 kernel.
Nothing happened.
Please help.
Click to expand...
Click to collapse
yeah actually this happened to me too at earlier stages i mean months ago..weirdly that *kernel not changing* problem is with only with cwm 6.0.5.3 ( which is necessery at this stage ) and not with earliest version of 6.0.5.0..i would stongly recommend you to flash stock via odin then cm7 to get back cuz if bu any chance you could get to cm7 kernel directly from cm11 one , you would keep getting problems with mounting data or getting 0 mb space etc...thats what i experienced..
press thanks if i helped