Related
CyanogenMOD 9.0 by TE4M NOW MTD!!!!!![4.0.4]
dear all,
this thread is created to seperate non development post inside the cm9 development thread and to keep it clean.
WHAT CAN BE POSTED HERE?
-Related to cm9.0
-problems during installation
-Possibilities of bugs
-All the noob questions
WHAT should not be posted?
-thanks,thank you....
-please do not report SAME BUG
-Do not report if you are downloading new release (just download it and report bugs only)
CM9.0 THREAD
http://forum.xda-developers.com/showthread.php?t=1385153
HUMBEROS UPLOAD AREA
http://www.humberos.com.br/p/android-ics.html
GREAT NOW WE HAVE OFFICIAL NIGHTLIES
GSM- http://get.cm/?device=p1
CDMA- http://get.cm/?device=p1c
PEOPLE BE CAREFUL!!!!! NOW BUILDS ARE MTD (FOR MORE INFORMATION LOOK AT POST 2)
hit thanks if i helped you
Installation guide
PEOPLE NOW BUILDS ARE MTD!! FILE SYSTEM BE CAREFULL
FOR INSTALLING MTD BUILD IT IS [MUST] COMPULSORY TO RESTOCK[ FOLLOW TILL STEP 3]
DONOT!!!!!! RESTORE ANY OTHER BUILDS ON MTD BUILDS
IF WANT TO GO BACK TO GB RESTOCK IS AGAIN NEEDED!!!
1)RESTOCK to gingerbread by following overcome method
www.teamovercome.net
2)flash the overcome kernel 4.0 to convert the system to ext4 from the above website
3)DOWNLOAD ANY ANY BUILD [OFFICIAL NIGHTLY OR SOMEONE ELSE BUILD]
4)copy the zip to tab and then reboot into recovery
5)wipe data,cache and dalvik cache
6) a) if MTD build once u flash them mtd zip it boots into mtd recovery and U HAVE TO FLASH THE ZIP AGAIN
b) if NON MTD just flash the zip
7)reboot!!!!
What doesnt work (19-04-2012-build)mtd
tv out
minors
external sd as sd-ext
gps (unconfirmed)
ums
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Hatori28 said:
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Click to expand...
Click to collapse
titanium backup not working on the build
The new update seems to eliminate the software keys; is there a way to reenable them?
Don t agree just wipe everything and restore user app with Tb. Works fine however i think it s a bad idea do such about system/data.
Sent from my GT-P1000 using XDA App
ronak.super said:
titanium backup not working on the build
Click to expand...
Click to collapse
If you haven't already done that, update your TB, the last version works on ICS.
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Medikay said:
The new update seems to eliminate the software keys; is there a way to reenable them?
Click to expand...
Click to collapse
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Graven-eof said:
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Click to expand...
Click to collapse
dude undervolt your settings using voltage control for better battery im getting the same battery which i used to get in gingerbread
ronak.super said:
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Click to expand...
Click to collapse
Sorry for the noob question...but how do you access that?
build.prop file /system/buil.prop
Sent from my HTC Desire using XDA App
Medikay said:
Sorry for the noob question...but how do you access that?
Click to expand...
Click to collapse
use root explorer go to system and then hold the build.prop and open in text editor
hit thanks
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
biffroy said:
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
set density to 160 it works fine becoz in 120 it becomes damn small and same the market page bcomes small when oriented horizontal
ronak.super said:
set density to 160 it works fine becoz in 120 it becomes damn small
Click to expand...
Click to collapse
I know that I used the honeycomb alpha at 120 and liked it that small. But my question isn't about the best density to have, it's about the keyboard at 120 and if anyone knows how to fix it or has any suggestions.
This is my GalaxyTab. There are many like it but this one is mine.
If, by some kind of freak occurrence I helped you, please hit THANKS!
my keyboard work fine on 120 check the attachment
It would be awsome if there is such way to force apps to start in tablet UI with 160 LCD density coz 120 is very small for 7" displays
CM9 on P1000
Hey guys, I tried to flash the latest ICS build for the P1000, but my tablet wont leave the start up screen...
I downloaded both files, replaced the kernel part of the zip with the one specific for the P1000, wiped cache, davik and reset user settings.
Then I flashed the zip file, but at reboot it won't leave the start up screen.
Any idea on what I may have done wrong?
Thanks!
Listen, I can read fine and understand instruction.
the phone is rooted but each time I try to install a ROM it gives me a new error, the last one was library cannot found.
I tried about 10 different roms from here, each failed. Either its stuck on boot screen or doesnt let me pass boot menu no matter what.
I guess I got the devils phone.
Any suggestions?
I don't know why your phone is crazy, but maybe flashing the SBF again will help?
auctsbe x651
sack148 said:
I don't know why your phone is crazy, but maybe flashing the SBF again will help?
Click to expand...
Click to collapse
Which SBF? the rom's? I tried, same BS everytime.
I just use this ****ty looking 2.3.6 I just want the phone to look nicer cuz I hate that too-androidish look.
And a nice smooth scrolling in the menu will be nice aswell.
i'm really sorry to ask and i dont mean to offend you but we need a starting point:
- did you try to install zip via stock recovery perhaps
- did you install 2ndinit?
- defy or defy+?
- did you wipe/factory reset before flashong the zip?
- do you maybe have bl7 kernel?
actually, sounds really bad but hopefully there is a way for you!
Please list the exact steps you followed to root and get a recovery and also mention what you did in recovery.. don't worry, we will help you as much as we can
And also list some of the roms you tried flashing..
Sent from my calculator using xda premium
measel said:
i'm really sorry to ask and i dont mean to offend you but we need a starting point:
- did you try to install zip via stock recovery perhaps
- did you install 2ndinit?
- defy or defy+?
- did you wipe/factory reset before flashong the zip?
- do you maybe have bl7 kernel?
actually, sounds really bad but hopefully there is a way for you!
Click to expand...
Click to collapse
Yes
Yes
Defy+
Yes
I have 2.3.6 I'm not sure what BL7 is
I'm not a pro. But first I'd like you to
- install 2ndinit again
- reboot and press Vol-Down when the blue light appears
- use custom recovery do install your preferred custom ROM. (only use the ones for defy+)
you can NOT install custom roms from stock recovery!
measel said:
I'm not a pro. But first I'd like you to
- install 2ndinit again
- reboot and press Vol-Down when the blue light appears
- use custom recovery do install your preferred custom ROM. (only use the ones for defy+)
you can NOT install custom roms from stock recovery!
Click to expand...
Click to collapse
Should I install a specific version of 2ndinit Defy? Can you give me the program, I'm confused what to download.
What do you mean stock recovery?
And another Q: If I was to successfully flash a rom, should I use GB or flash to JB?
stock recovery = shut down > power + vol-down
custom recovery = reboot > vol-down when blue light
no specific 2ndinit. just use the one that is mentioned in FAQ or howto install...
or here: http://forum.xda-developers.com/showthread.php?t=1032212
If you don't know the difference between stock and custom recovery you might want to start reading here: http://forum.xda-developers.com/showthread.php?t=1216982
...and might want to rethink your first sentence:
Hesanka said:
Listen, I can read fine and understand instruction.
Click to expand...
Click to collapse
measel said:
stock recovery = shut down > power + vol-down
custom recovery = reboot > vol-down when blue light
no specific 2ndinit. just use the one that is mentioned in FAQ or howto install...
or here: http://forum.xda-developers.com/showthread.php?t=1032212
Click to expand...
Click to collapse
I have a few more Q:
Do I need to upgrade my phone to 4.1.2 before flashing a ROM that is 4.1.2 or will that be the upgrade?
Which ROM do you suggest for me use because I am not very decisive about it.
What do I need to do for this ROM to work for me? http://forum.xda-developers.com/showthread.php?t=1033654
I have GB 3.2.6 rooted with DFP 231
1. no. there is no official 4.1.2 for defy.
2. i would recommend cm7.
use a version that is for the defyplus and you dont have anything to prepare more than you will find in the howto's.
check this thread for cm7 builds: http://forum.xda-developers.com/showthread.php?t=1458729
CM7 nightlys | info collection [update: 12-12-07 Maniac] + PDroid
and please give some feedback what helped and what was the problem.
measel said:
1. no. there is no official 4.1.2 for defy.
2. i would recommend cm7.
use a version that is for the defyplus and you dont have anything to prepare more than you will find in the howto's.
check this thread for cm7 builds: http://forum.xda-developers.com/showthread.php?t=1458729
CM7 nightlys | info collection [update: 12-12-07 Maniac] + PDroid
and please give some feedback what helped and what was the problem.
Click to expand...
Click to collapse
Ok, tried to do this guide http://forum.xda-developers.com/showthread.php?t=1054447
with CM7 nightlys and my phone is stuck after rebooting on the stupid motorola boot sign
I'm gonna have to flash with RSD again. why does motorola has to make stupid devices EACH YEAR?!
You need to get some things STRAIGHT.
Hesanka said:
Ok, tried to do this guide http://forum.xda-developers.com/showthread.php?t=1054447
with CM7 nightlys and my phone is stuck after rebooting on the stupid motorola boot sign
I'm gonna have to flash with RSD again. why does motorola has to make stupid devices EACH YEAR?!
Click to expand...
Click to collapse
Listen to this. It is not Motorola's fault that you have soft bricked your device. It is entirely your fault. Hundreds of other guys have successfully flashed their device with the ROM of their choice and are having no problems. Maybe you should read threads before trying to flash ROMs. If you do not know the basics of rooting and modding android, you should not attempt to do it. And if you have flashed your device without doing the neccessary homework, please do not expect help from the community. Please educate yourself to the required level before attempting to do such things. There are several well written and comprehensive guides and tutorials on the cyanogen wiki as well as here on xda which can answer all your questions for sure. For your own sake, please read them. Your posts in this thread highlight your severe lack of rudimentary knowledge about android. I'm not saying that's a bad thing, because everyone was like that at some point. BUT, we read and we read and if we didn't understand, we read some more!
Please understand that this is a community where we cannot help you if you do not help yourself. I'm sorry to to tell you this, but you are being a jerk by criticising Moto and whining that things aren't working when it is you who has done things in the incorrect manner. So stop being a n00b, stop whining, go read some threads ( ALL THE STICKY ONES, MINIMUM ! AS WELL AS THE ONES ON THE CYANOGENMOD WIKI ! ) and educate yourself. Just because your friend has modded his device does not mean that you can too.It requires a certain level of expertise which can be easily gained, provided that you are ready to be an eager learner. Remember this, TO GET GOOD REPLIES, YOU HAVE TO ASK GOOD QUESTIONS.
Get rid of the attitude, --- learn the basics --- and then come back. If you are still having a genuine problem, then we will help you.
PS: You mentioned that you are going to flash using RSD lite. PLEASE flash the appropriate SBF file. If you flash the wrong SBF, it can lead to some serious problems. Choose wisely. And if you make ****s in that too, please do not start a new thread, refer to the pre-existing help threads. Good luck.
And please do not ask for the links to the above mentioned threads, use the search function and your common sense.
viki1296 said:
Listen to this. It is not Motorola's fault that you have soft bricked your device. It is entirely your fault. Hundreds of other guys have successfully flashed their device with the ROM of their choice and are having no problems. Maybe you should read threads before trying to flash ROMs. If you do not know the basics of rooting and modding android, you should not attempt to do it. And if you have flashed your device without doing the neccessary homework, please do not expect help from the community. Please educate yourself to the required level before attempting to do such things. There are several well written and comprehensive guides and tutorials on the cyanogen wiki as well as here on xda which can answer all your questions for sure. For your own sake, please read them. Your posts in this thread highlight your severe lack of rudimentary knowledge about android. I'm not saying that's a bad thing, because everyone was like that at some point. BUT, we read and we read and if we didn't understand, we read some more!
Please understand that this is a community where we cannot help you if you do not help yourself. I'm sorry to to tell you this, but you are being a jerk by criticising Moto and whining that things aren't working when it is you who has done things in the incorrect manner. So stop being a n00b, stop whining, go read some threads ( ALL THE STICKY ONES, MINIMUM ! AS WELL AS THE ONES ON THE CYANOGENMOD WIKI ! ) and educate yourself. Just because your friend has modded his device does not mean that you can too.It requires a certain level of expertise which can be easily gained, provided that you are ready to be an eager learner. Remember this, TO GET GOOD REPLIES, YOU HAVE TO ASK GOOD QUESTIONS.
Get rid of the attitude, --- learn the basics --- and then come back. If you are still having a genuine problem, then we will help you.
PS: You mentioned that you are going to flash using RSD lite. PLEASE flash the appropriate SBF file. If you flash the wrong SBF, it can lead to some serious problems. Choose wisely. And if you make ****s in that too, please do not start a new thread, refer to the pre-existing help threads. Good luck.
And please do not ask for the links to the above mentioned threads, use the search function and your common sense.
Click to expand...
Click to collapse
I've read well over 30 topics here ENTIRELY and none helped, I've done everything according to the guides, simply when I start to boot my device after a ROM flashing it has a new problem, I just gave up on motorola, tomorrow I'm going to return this piece of rubbish and get myself a SGS2 Because I've had enough of Motorola.
Thanks and no thanks to all, I've had enough of this rubbish.
good luck with your new device.
Well then..
Hesanka said:
I've read well over 30 topics here ENTIRELY and none helped, I've done everything according to the guides, simply when I start to boot my device after a ROM flashing it has a new problem, I just gave up on motorola, tomorrow I'm going to return this piece of rubbish and get myself a SGS2 Because I've had enough of Motorola.
Thanks and no thanks to all, I've had enough of this rubbish.
Click to expand...
Click to collapse
Okay, wish you better luck with your SGS2, try harder with it.. And please don't call the Defy a piece of rubbish because it is a lovely phone, infact I don't know any other device which can boot custom kernels on a locked bootloader :laugh:
And if you manage to brick the SGS2 also, perhaps it's best that you get an iPhone next time.
Hey guys,
can you say me if there will be custom roms for this tablet in the future?
would be very nice, cause i love flashing all my devices
I would like to know too. Lenovo has crippled this version of Android.
willgreg21 said:
I would like to know too. Lenovo has crippled this version of Android.
Click to expand...
Click to collapse
They absolutely have. I was able to "semi-root" with framaroot, so thankfully su is added BUT I still can't uninstall bloatware...although there isn't much it still bugs me. full root and ROM still needed.
Custom ROM for S6000 would be very nice. Searching for it every day.
KitKat
Hopefully someone will add a KitKat ROM when possible, don't see lenovo upgrading us to it when it becomes available. Don't think the tablet is popular enough unfortunately though.
Just use titanium back up to remove bloat.... Work great for me
Sent from my IdeaTab S6000-F using xda app-developers app
Yea, I wish there was a custom ROM too. I just got my S6000-H yesterday, rooted it right away and used TiBu to remove some of the bloatware (I froze some more that I wasn't sure of). But it's missing simple things I'm used to from my N7000, like the advanced options in the shutdown menu.
I read in another thread that we do have a type of recovery built in - could someone tell me where to find it?
Never mind, found it ... and finally installed CWM today too. Now all I need is a nice custom ROM, but it doesn't look like any devs have that tablet
Use xposed to add modules. .. reboot, multi Window, floating, etc...etc... my S6000 tab works great. .. Still not good as my note 3 but...almost! My wife is jealous of all my tab can do... She think it stock that way. .. And her weird little Ellipses 7 Verizon gave hercan't do half of it. ... Guess I'll have to pimp her tab up for her! ! Look up x posed installer on xda, or Google it, then just follow where it leads. ... Easy
Sent from my SM-N900V using Tapatalk
Nimueh said:
Yea, I wish there was a custom ROM too. I just got my S6000-H yesterday, rooted it right away and used TiBu to remove some of the bloatware (I froze some more that I wasn't sure of). But it's missing simple things I'm used to from my N7000, like the advanced options in the shutdown menu.
I read in another thread that we do have a type of recovery built in - could someone tell me where to find it?
Never mind, found it ... and finally installed CWM today too. Now all I need is a nice custom ROM, but it doesn't look like any devs have that tablet
Click to expand...
Click to collapse
please a link for working CWM for b6000 h (3g) Thank you!
criszz said:
please a link for working CWM for b6000 h (3g) Thank you!
Click to expand...
Click to collapse
If you mean S6000-H then it's http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417
I followed that step by step and it worked flawlessly
sorry my mistake , mean lenovo yoga tablet 8' b6000, sorry again , i was in a hurry, im wonder if that tool will work for me also, i'm afarid of briking
mpdayii said:
Use xposed to add modules. .. reboot, multi Window, floating, etc...etc... my S6000 tab works great. .. Still not good as my note 3 but...almost! My wife is jealous of all my tab can do... She think it stock that way. .. And her weird little Ellipses 7 Verizon gave hercan't do half of it. ... Guess I'll have to pimp her tab up for her! ! Look up x posed installer on xda, or Google it, then just follow where it leads. ... Easy
Click to expand...
Click to collapse
Thanks for that tip ... I just installed xposed and 3 modules, going to have a look through that huge list these days to see if I find more.
I installed the one to show the temperature in the status bar, the advanced reboot one and the one that shows RAM used/free in the task switcher. Pretty neat so far - if you know of any other "must-have" modules feel free to let me know
And sorry criszz, but no idea if that'll work on your tablet too
Nimueh said:
Thanks for that tip ... I just installed xposed and 3 modules, going to have a look through that huge list these days to see if I find more.
I installed the one to show the temperature in the status bar, the advanced reboot one and the one that shows RAM used/free in the task switcher. Pretty neat so far - if you know of any other "must-have" modules feel free to let me know
And sorry criszz, but no idea if that'll work on your tablet too
Click to expand...
Click to collapse
for xposed module i use a must have module : Gravity box and Boot manager
I installed Advanced Power Menu ... but Gravity Box I'm not sure about, way too much stuff in there I'll probably never need
I came across this:
http://lenovokitkatrom.blogspot.com/2013/09/upgradeupdate-ideatab-s6000-to-44-kitkat.html
Anyone have a look here? I'm usually sceptical of something not on XDA.
PRGS3 said:
I came across this:
http://lenovokitkatrom.blogspot.com/2013/09/upgradeupdate-ideatab-s6000-to-44-kitkat.html
Anyone have a look here? I'm usually sceptical of something not on XDA.
Click to expand...
Click to collapse
Blog was closed but I think you meant these: http://lenovoideatabs6000442kitkatrom.blogspot.de/ !?
I thinks this is a fake because as I know Mediatek chipsets aren't running on 4.4
But maybe this news can let us hope: http://news.softpedia.com/news/Medi...Coming-to-Tablets-by-Month-s-End-436176.shtml
schubi82 said:
Blog was closed but I think you meant these: http://lenovoideatabs6000442kitkatrom.blogspot.de/ !?
I thinks this is a fake because as I know Mediatek chipsets aren't running on 4.4
But maybe this news can let us hope: http://news.softpedia.com/news/Medi...Coming-to-Tablets-by-Month-s-End-436176.shtml
Click to expand...
Click to collapse
Thanks for that update!
I won't hold my breath for anything official seeing as Lenovo didn't even bump up to 4.3,
and zero ROMS out there? Or am I rubbish at searching?
I read in an other Forum that there is no Custom ROM yet because Mediatek isn't releasing Source Code of their ROMs. After Browsing Lenovo Site of the S6000 I have found this:
mobilesupport.lenovo.com/us/en/products/s6000_tablet?tabname=manuals
You get linked to Manuals, click on Downloads section and then there is:
Open Source Code - S6000 Tablet 10/12/2013 - 320MB
Don't know if it's the right thing, just wanted to mention it here.
And other News on KitKat:
news.softpedia.com/news/Android-4-4-KitKat-Update-for-Lenovo-Yoga-8-Inch-and-10-Inch-Tablets-Coming-in-June-438474.shtml
It's getting closer now, first 4.4 mediatek tablet ( lenovo yoga ) get's update in June. Let's hope for a compatible version / port for the S6000.
In am wondering if the Updates for the Yoga Tablets are compatible with the S6000, cause they use same processor and overall same specs.
Greetings JanDr0id
ps: i erased the httttttp in front of the links cause its my 1st post and xda isnt allowing me to post links yet.
I saw that mediatek released their source for kitkat. All the parts are there. Just need a Dev with one of these to assemble it.
barc0d3 said:
I saw that mediatek released their source for kitkat. All the parts are there. Just need a Dev with one of these to assemble it.
Click to expand...
Click to collapse
Lets hope there is a developer that can help compile it.
This thread has been created
for
Questions & Answers/Troubleshooting
Specific to
[Kitkat] CM11 Android 4.4.4 for the Droid X
Click link here>> (http://forum.xda-developers.com/showthread.php?t=2670547) <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP​
well Mirroring to chromecast does not work if anyone was asking.
HDMI not working for me (even with RealHDMI)
bluesatyr said:
HDMI not working for me (even with RealHDMI)
Click to expand...
Click to collapse
using cm-11-20140706-UNOFFICIAL-shadow or newer?
sd_shadow said:
using cm-11-20140706-UNOFFICIAL-shadow or newer?
Click to expand...
Click to collapse
Newer (on cm-11-20140709-UNOFFICIAL-shadow)
I got HDMI video out to work on cm-11-20140713-UNOFFICIAL-shadow with realHDMI app.
took a minute or more
sd_shadow said:
I got HDMI video out to work on cm-11-20140713-UNOFFICIAL-shadow with realHDMI app.
took a minute or more
Click to expand...
Click to collapse
Works! Awesome, thanks!
Now if i could just get it to fullscreen...
bluesatyr said:
Works! Awesome, thanks!
Now if i could just get it to fullscreen...
Click to expand...
Click to collapse
Have a zoom option on tv?
sd_shadow said:
Have a zoom option on tv?
Click to expand...
Click to collapse
No
do we have a fully working safe strap that mounts partitions correctly and stuff i know ahhhhhh got it booting but was there ever a fully working one?
billycar11 said:
do we have a fully working safe strap that mounts partitions correctly and stuff i know ahhhhhh got it booting but was there ever a fully working one?
Click to expand...
Click to collapse
Yea but its only good for having 2 cm11 ROMs since he hasn't built PAC and roeblatt3 never finished liquidkk I believe..
Sent from my Paranoid Bionic
Wifi on 802.11n seems pretty unstable, no internet connection from time to time... but seems not the rom's problem.. same issue on other roms but still wondering if there's any solution/workaround (instead of working on 802.11g...)
The current version of CM 11 on my Droid X has no WiFi issues.
Sent from my STUDIO 5.5 using Tapatalk
---------- Post added at 04:38 PM ---------- Previous post was at 04:38 PM ----------
Try it on a clean install.
Sent from my STUDIO 5.5 using Tapatalk
ashyoff said:
Wifi on 802.11n seems pretty unstable, no internet connection from time to time... but seems not the rom's problem.. same issue on other roms but still wondering if there's any solution/workaround (instead of working on 802.11g...)
Click to expand...
Click to collapse
do you have access to the router? switch to TKIP instead of AES encryption, it might help you.
Newbie wants to try and CM11 DroidX
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.
Lunarino said:
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.
Click to expand...
Click to collapse
Just follow the install guide for cm11 its pretty idiot proof and if u brick you can sbf using ezSBF or rsd
Sent from my Paranoid Bionic
Lunarino said:
Howdy
I've begun researching the possibility of taking my clunky old Verizon DroidX that's been disconnected from a phone# and applying a custom Rom in the hopes of improving its performance.
After receiving considerable help from @sd_shadow with getting OtterX working beautifully on my KF, I'm feeling brave enough to try something similar now.
The 1st step I've taken was to use "Android Device Drivers Install" - https://www.youtube.com/watch?v=j_KPGUMzrjU (VERY informative) youtube video by Rootjunky.com
I successfully used "How to Root Droid X & Droid 2 on Android V2.3.4" - https://www.youtube.com/watch?v=w543XNIExWo to get it rooted - YAY.
Next is getting a nandroid backup done. I was just about to purchase "Droid X Recovery Bootstrap" - https://play.google.com/store/apps/details?id=com.koushikdutta.droidx.bootstrap from the Play Store for $3 but then I noticed a wise man said "if Droid X bootstrap works for you great, but don't be surprised if it causes a bootloop"
I know that the next logical step is to be able to restore the device before going any further. I'm thinking CWM is a good way to go.
I need advice as far as which specific goal I should be shooting for as far as the best recommended final ROM based on your successes with my configuration. I really do like CM11/4.4.4 a whole lot.
Any Suggestions please?
System version = 45.621.10.MB810.Verizon.en.US
Android version = 2.3.4
Kernel Version - 2.6.32.9-g3e80c7a
Build number = 4.5.1_57_DX9-10
ERI = 5
PRL = 52826
Thanks in advance for reading this and possibly even considering to point me in the right direction.
Click to expand...
Click to collapse
Do not use the droid x bootstrap from play store, it was designed for froyo not gingerbread. If you would like to buy one pick droid 2 or 3, but the modified one in the op is best.
Sent from my XT894 using Tapatalk
sd_shadow said:
Do not use the droid x bootstrap from play store, it was designed for froyo not gingerbread. If you would like to buy one pick droid 2 or 3, but the modified one in the op is best.
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
I used the modified droid x one not the modified droid 2 lol it worked but if left on stock it made it to where every time device was powered on it went to cwm and had to select reboot to get into stock system. Once I flashed a ROM that stopped happening tho.
Sent from my Paranoid Bionic
Oggie7797 said:
I used the modified droid x one not the modified droid 2 lol it worked but if left on stock it made it to where every time device was powered on it went to cwm and had to select reboot to get into stock system. Once I flashed a ROM that stopped happening tho.
Sent from my Paranoid Bionic
Click to expand...
Click to collapse
Booting to cwm error, is common using any of the bootstraps, with the dx, d2, and d2g
Sent from my XT894 using Tapatalk
sd_shadow said:
Reboot to cwm, is common using any of the bootstraps, with the dx, d2, and d2g
Sent from my XT894 using Tapatalk
Click to expand...
Click to collapse
I've only ever owned the droid x and used modified DX bsr but I never stayed stock for long the reboot to cwm I was talking about was on my sister's DX and I noticed it briefly on mine when I was on stock (one of those rare occasions)
Sent from my Paranoid Bionic
Hi
Here are some version of latest SGP511 Nordic Combined firmware.
Nandroid backup are highly recommended.
Stock ftf install via flashtool:
https://mega.co.nz/#!kcxxjaLA!itErjRi2fYPPswal-c7XasF_lAvPKyY4GwEzY3xgHZ0
http://www.mediafire.com/download/x....A.0.314_Customized_NCB_(Nordic_Combined).ftf
Prerooted version flash via custom recovery. This install also SuperSu and DualRecovery:
https://mega.co.nz/#!hdZV1CBY!MJIOjMoN8uSposyaV6FyQOWeuNvQ2tSsHjw4F0rBakY
http://www.mediafire.com/view/bosul56grj4dbt8
Deodex patch flash via custom recovery and wipe dalvik cache:
https://mega.co.nz/#!JYxzFD4T!mBzCWiF9fHOFQYQ-9fuoiq2DMxYxVk9LYJkXKQymQEo
http://www.mediafire.com/view/6ty4vyx43aybovx
Credits: @Androxyde, @Chainfire, @Nut, @LaguCool , @zxz0O0 and @RyokoN
Thanks, I managed to update my SGP511 with this image using Flashtool (without wiping data, all setting were kept).
Rooting with Easyroot V11 took two tries, but works fine. Also reinstalled dual recovery again without problems.
MrMagic said:
Thanks, I managed to update my SGP511 with this image using Flashtool (without wiping data, all setting were kept).
Rooting with Easyroot V11 took two tries, but works fine. Also reinstalled dual recovery again without problems.
Click to expand...
Click to collapse
Thanks your feedback. You are right. No need to wipe anything.
kulvertti said:
Thanks your feedback. You are right. No need to wipe anything.
Click to expand...
Click to collapse
Ohh awesome to know
Had enough of waiting on my Swedish model that I just needed to update it
Just updated my tablet, and feels good to finaly be able to use a stylus on it. It's not perfect but alot better then before then i had to push really hard to get any sort of response with a stylus. The small issues i have using stylus now could be due to the stylus, i many times leaning it a bit to left or right and it dont always do as i wanted, but could be that im using a thinner stylus then i used to have so not enough of it are in contact with the tablet.
Aotw said:
Just updated my tablet, and feels good to finaly be able to use a stylus on it. It's not perfect but alot better then before then i had to push really hard to get any sort of response with a stylus. The small issues i have using stylus now could be due to the stylus, i many times leaning it a bit to left or right and it dont always do as i wanted, but could be that im using a thinner stylus then i used to have so not enough of it are in contact with the tablet.
Click to expand...
Click to collapse
Thanks for your feedback. I agree you that this ain't the most stylus friendly device but with right stylus still usable.
kulvertti said:
Thanks for your feedback. I agree you that this ain't the most stylus friendly device but with right stylus still usable.
Click to expand...
Click to collapse
After this update it works almost as is thould for me, but as i mentiond in my previous post i could be due to the thinner top of the stylus and how i hold it. Will try use some others to check.
wrong?
sryyy
flashed my 512 with flashtool, no problems. Thanks!
Edit: rooted with easy root v12.
Seemed like easyroot kind of hung after it said 'cleaning up' but a quick download of terminal emulator showed I could su/root no problem. (I think)
ChodTheWacko said:
flashed my 512 with flashtool, no problems. Thanks!
Edit: rooted with easy root v12.
Seemed like easyroot kind of hung after it said 'cleaning up' but a quick download of terminal emulator showed I could su/root no problem. (I think)
Click to expand...
Click to collapse
Just run it again and you be fine.
Can someone please mirror this file somewhere different from mega? The Italian gov blocked it and I'm unable to access it (nor I can change my DNS because of my ISP restrictions)
this firmware works great with my z2.
Thank you so much. this firmware works great with my z2.
Wifi speed now changes from 70 MBps to 125 MBps.
Only onthing is need to re-install some apps like Viber, Swype ...
GabMus said:
Can someone please mirror this file somewhere different from mega? The Italian gov blocked it and I'm unable to access it (nor I can change my DNS because of my ISP restrictions)
Click to expand...
Click to collapse
I make mirror for you. Uploading now and should be ready about hour and half.
Here are mirrors for you:
https://www.mediafire.com/?x4c5o2d099d1604
https://dl.dropboxusercontent.com/u/25635282/SGP511_17.1.2.A.0.314_Customized%20NCB%20(Nordic%20Combined).ftf
https://drive.google.com/file/d/0B4xHeTeWdVxGUmE2SGxKMmV4bVE/edit?usp=sharing
hungnm02 said:
Thank you so much. this firmware works great with my z2.
Wifi speed now changes from 70 MBps to 125 MBps.
Only onthing is need to re-install some apps like Viber, Swype ...
Click to expand...
Click to collapse
Thank you for feedback.
Thank you kindly
GabMus said:
Thank you kindly
Click to expand...
Click to collapse
You are welcome.
Hey Guys,
Did you see any improvement in touch bug with this version?
I'm on 17.1.1.A.0.402 and SGP511, I've some problem with scroll specially when the feature "double tap to wake up" is enabled.
Cheers,
chentz78 said:
Hey Guys,
Did you see any improvement in touch bug with this version?
I'm on 17.1.1.A.0.402 and SGP511, I've some problem with scroll specially when the feature "double tap to wake up" is enabled.
Cheers,
Click to expand...
Click to collapse
Hi bro
I haven't noticed any touch bug with this device and firmware. Even stylus is usable. Try it and report back.
kulvertti said:
Hi bro
I haven't noticed any touch bug with this device and firmware. Even stylus is usable. Try it and report back.
Click to expand...
Click to collapse
Hi,
I upgraded my SGP-511 yesterday with this version and the touch sensibility is really better.
Just a comment about the problem. I was looking for some fix for that problem when I found that with CM 11 the tablet doesn't have this kind of problem. In my case I didn't install the CM to keep the warranty.
chentz78 said:
Hi,
I upgraded my SGP-511 yesterday with this version and the touch sensibility is really better.
Just a comment about the problem. I was looking for some fix for that problem when I found that with CM 11 the tablet doesn't have this kind of problem. In my case I didn't install the CM to keep the warranty.
Click to expand...
Click to collapse
Hi mate. Thanks for you feedback.