Database Users

Odin after recovery problems: fail!

Hey guys,
I was running slimbean 2.7 and devilkernel. When I wanted to reboot my phone, I got into recovery mode instead of the system. "Reboot to system" in cwm didn't help and neither did pressing the power button, I kept getting into recovery again and again.
After Cache and Dalvik wipe didn't help, I decided to wipe data/factory reset and use a backup. When trying to choose the backup, all of them were gone, so instead I tried to flash slimbean again, all I got was "e: can't mount sdcard" (this is all on internal sdcard, i don't have an external one).
So I started odin3 v1.85 and choose semaphore 2.5.0s.tar, put it in pda, brought my phone into download mode, docked it and pressed start (repartition wasn't checked and kies wasn't running either) and I instantly got "fail!". The phone is still connected to odin but it now shows a completely black screen.
Odin says:
>ID:0/003>Added!!
>ID:0/003>Odin v.3 engine.. (ID:3)
>ID:0/003>File analysis..
>ID:0/003>Setup Connection..
>ID:0/003>Initialization..
>ID:0/003>Get PIT for mapping..
>ID:0/003>Firmware update start..
>ID:0/003>zImage
>ID:0/003>Complete(Write)operation failed.
>ID:0/003>All threads completed. (succeed 0 / failed 1)
Please guys, I'm out of options here, please help me out :crying:
Do I need a 3 part firmware with repartition now? Or what do I do?
Just flashed stock firmware with repartition, that's what I got:
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XWJW1_CL788890_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5 is valid.
<OSM> CSC_DBTJV2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)

Corndude said:
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Flash an Ezbase rescue kit with 512 Pit file and repartition TICKED from My Android Collections
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

xsenman said:
Flash an Ezbase rescue kit with 512 Pit file and repartition TICKED from My Android Collections
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
Click to expand...
Click to collapse
Thanks so much. It's still connected to odin though. Is it save to disconnect it now or am I not going to be able to get back into download mode after that?
i9000 Rescue EzBase Rescue and Recovery by nitr8 Full Graphical HOW To and Tutorial download
i9000 Rescue EzBase Rescue with CF Root & semaphore root by nitr8 & chainfire, repacked by slaphead20
One of those 2, right?
Does it matter which 512 I flash or are they all the same?

Corndude said:
Thanks so much. It's still connected to odin though. Is it save to disconnect it now or am I not going to be able to get back into download mode after that?
i9000 Rescue EzBase Rescue and Recovery by nitr8 Full Graphical HOW To and Tutorial download
i9000 Rescue EzBase Rescue with CF Root & semaphore root by nitr8 & chainfire, repacked by slaphead20
One of those 2, right?
Does it matter which 512 I flash or are they all the same?
Click to expand...
Click to collapse
IF, its stuck, you should disconnect pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup into download mode without SIM and Ext.SD Card....
yes, any will do the PIT files are included in the kits, and yes its i9000 512 Pit (there is only one 512 pit for i9000)

xsenman said:
IF, its stuck, you should disconnect pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup into download mode without SIM and Ext.SD Card....
yes, any will do the PIT files are included in the kits, and yes its i9000 512 Pit (there is only one 512 pit for i9000)
Click to expand...
Click to collapse
None of the downloads work oO
Any alternatives?
edit: my bad, works.

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PDA-XWJVH.tar.md5 is valid.
<OSM> EZbase-PHONE-XXJVO.tar.md5 is valid.
<OSM> EZbase-CSC-NEEJV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Got it. Can I now flash a normal 3part stock rom? Or what do I do? I'd like to flash a stock rom without root, xwjw1. Is that possible to do with repartition now or am I going to crash something?
Edit:
Okay, problem is, after the first reboot after copying ezrescue via odin cwm tells me the following:
--Copying media files...
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can`t mount /sdcard
Your storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE#
--Appling Multi-CSC...
Installing Multi-CSC
Can´t access to `/system/csc/XEU/system/´.
Successfully applied multi-CSC.
Like I said in the beginning: not being able to mount the sdcard was one of the first problems I had before all this crap started. Does that mount that there is some kind of hardware damage? What do I do next?

Corndude said:
not being able to mount the sdcard was one of the first problems I had before all this crap started. Does that mount that there is some kind of hardware damage? What do I do next?
Click to expand...
Click to collapse
Is both your Storage available on your Phone? and can you open them on your PC ?
If you already have a backup, you can format your SD cards in the phone or via PC by unmount or in USB storage mode.
Anyway all you need to do here, is Flash the ROM again for your region ( initially you must have had XEU). Do not use Pit and do not repartition . Chose from here
First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

Thanks a lot, I did that, but the sdcard still does not work at all. I'm sending it back to have it repaired, it's gotta be a hardware problem. thanks a lot for your help mate =)

Its common to get dead SD cards on random galaxy s models. Its not you
Sent from my GT-I9000 using xda premium

[Q] [Help] Internal sdcard unmountable

Hello Guys (and ladies!),
I'm new here, i'm looking for a little help with my new S4 device
I was looking to perform a wipe of the default ROM, and install a Google Edition in 4.3. However, I've never reach this last part !
Here is my issue :
Actions done :
Add CWM 6.0.3.2-4 on the S4, using Odin (works fine)
Installation of Adam kernel 1.6 (no prob, the phone is running well)
Transfering the .zip file of the wanted ROM on the internal sdcard with the phone running (ok)
Rebooting the phone on CWM (ok)
Clearing all to default factory, cache & dalvik cache, and... formatting data, cache & system partitions (it was to start as clean as possible). Done without issue (the formatting of the /system was quite long, but succeeded).
But after performing this operation, I was not able to perform any other action on the phone ; when I try to access to the internal sdcard, I have the following error :
E:Can't mount /sdcard/
Click to expand...
Click to collapse
On the advanced logs :
W:Failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata (Invalid argument)
Click to expand...
Click to collapse
I try to use an external sdcard, no problem to mount this one. But even by trying to install the ROM through the external sdcard, the installation failed, because the internal sdcard could not be mounted.
So I've try to use odin to reinstall the default rom, downloaded from Samsung website.
The upload is working fine, but the phone is not fully booting (freezed on "Samsung", after the jingle).
I reinstall CWM after this, and I still get the same error message : Can't mount sdcard.
I'm running out of options here, and I don't know what I can try else, Google was not very helpfull with this
Someone have any idea ?
Thanks a lot !

I've proceed to another try to a clean install (using another Odin version, still with the default option, and using a stock rom).
The installation by itself works fine (in Odin) :
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8-PRE-ROOTED-DEODEXED-SuperSlim.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> NON-HLOS.bin
<ID:0/011> aboot.mbn
<ID:0/011> boot.img
<ID:0/011> modem.bin
<ID:0/011> recovery.img
<ID:0/011> rpm.mbn
<ID:0/011> sbl2.mbn
<ID:0/011> sbl3.mbn
<ID:0/011> system.img.ext4
<ID:0/011> tz.mbn
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
However, the device doesn't boot ; the loadscreen with samsung appears, the jingle runs, and the display show "SAMSUNG" and nothing else (waited ~1h to be sure that the system wasn't just still progressing with the installation process).
Rebooting the phone / removing the battery / etc, still the same behaviour.
When adding a recovery (ie, CWM), when I try to access the sdcard, I still have the error message :
E: Can't mount /sdcard/
I don't understand.
- If as I think it was my system formatting which was the root cause of the issue, why the sdcard is not mounting ? I never try to format the whole sdcard. And the ext4fs has been rebuild with success after the formatting
- If the device could not mount the sdcard, where all datas send through Odin are left ? In the memory of the device, and only write into the Sdcard at first boot ? (could explain why the device is stuck on this mode).
Someone think it could a good idea to try to format the sdcard, using the sdcard format option from CWM? If yes, how this is working ? Everything will be wiped ? What about IMEI informations & stuff ?
Thanks.

This was a previous cwm issue where it can't access the SD card. If you install a rom you'll probably get error status 7. Download the latest philz recovery .tar and flash it Odin. Reboot into recovery and wipe everything and the internal SD. This should solve the problem.
---------- Post added at 04:47 PM ---------- Previous post was at 04:41 PM ----------
You will lose everything btw

Thank you for your response !
I will try this and keep you posted.
Just two things :
- "wipe everything and the internal SD". Why do you mean by "the internal SD" ? Format ?
- When you tell "everything", is this including informations like IMEI (don't care about the datas on the phone, just about the hardware specifics for network registration) ?
Just want to be sure of what i'm doing Thanks again !

Formatting the internal SD will wipe the internal memory so you will lose all pics etc. Wont affect anything to do with the hardware, imei etc its just your information on the device
In philz if you select wipe /clean install new rom it will wipe the system completely and the phone won't have a new any software on it until you either install a ROM using philz or using Odin to flash official firmware. My advice would be to remove the SD card just in case you accidentally wipe that as well. In philz that's called the external Sd
---------- Post added at 06:03 PM ---------- Previous post was at 05:58 PM ----------
To format the SD go into the mounts and storage option

Thanks for the precision
Ok, here we go :
Installation of Philz Recovery for i9505 (v5) using Odin v3.07
=> OK
Boot onto Philz Recovery
=> Boot ok, but getting an error :
Code:
PhilZ Touch 5
CWM Base version: v6.0.3.7
E:Could not mount /data to setup /data/media path!
In the logs :
Code:
W:failed to mount /dev/block/mmcblk0p29 /data ext4 (invalid argument)
Wiping data for new ROM
=> KO
Code:
--Wiping data...
Formatting /data...
Error mounting /data!
Skpping format...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
Skpping format...
Formatting /external_sd/.android_secure!
Error mounting /external_sd/.android_secure!
Skpping format...
Data wipe complete.
--Wiping system...
Formatting /system...
-- Wiping preload...
Formatting /preload...
Now flash a new ROM !
Trying to format the sdcard
=> KO
Logs:
Code:
Formatting /sdcard...
I:Formatting unknown device.
I:setting up /data/media(/0) for /sdcard.
W:failed to mount /dev/block/mmcblk0p29 /data ext4 (invalid argument)
Error mounting /sdcard!
Skipping format...
Done.
Still stuck

Reload recovery and manually Mount the internal SD before formatting

symondo12 said:
Reload recovery and manually Mount the internal SD before formatting
Click to expand...
Click to collapse
In fact, I finally succeeded
I've downloaded TWRP, and I was able to format and install the Google Rom with this recovery without any issue !
Anyway, thank you for your help. I hope this post could help someone else in the future !
Regards,
Felkor

Glad to hear you got it sorted. Just to make you aware that TWRP 2.5.2 had a similar issue. Should be OK with 2.6

FAILD ODIN FLASH ROM E:failed to mount /system (Invalid argument)

Hello friends
I have I9500
I get FAILED when burning ROM Odin
I know burn ROM, Because of MY other I9500 This successful (same the computer,same USB cable ,same USB connection,same rom stock)
LOG ODIN:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOH6_I9500OJVHOG3_I9500XXUHOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
into download mode and Ricovery
Download mode Root process successful, replacing castom Ricovery successful also
I tried to install castom Rom Getting E:failed to mount /system (Invalid argument)
FACRORY REST OR WIEP CACE always E:failed to mount /system (Invalid argument)
The problem if understand As of this E:failed to mount /system (Invalid argument)
How to FIX it?
please help me
Thank you friends
Sorry for MY english

dragson said:
Hello friends
I have I9500
I get FAILED when burning ROM Odin
I know burn ROM, Because of MY other I9500 This successful (same the computer,same USB cable ,same USB connection,same rom stock)
into download mode and Ricovery
Download mode Root process successful, replacing castom Ricovery successful also
I tried to install castom Rom Getting E:failed to mount /system (Invalid argument)
FACRORY REST OR WIEP CACE always E:failed to mount /system (Invalid argument)
The problem if understand As of this E:failed to mount /system (Invalid argument)
How to FIX it?
please help me
Thank you friends
Sorry for MY english
Click to expand...
Click to collapse
Try to reflash stock rom with .pit and re-partition.

Lennyz1988 said:
Try to reflash stock rom with .pit and re-partition.
Click to expand...
Click to collapse
I did so
Still Fails
It is not my image from Google but I did
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with re-partition agin faild
without re-partition agin faild
I also tried(ROM Parts)
http://forum.xda-developers.com/galaxy-s4/general/i9500xxuhoa7-android-5-0-1-lollipop-t3017958
with re-partition agin faild
without re-partition agin faild
without pit file agin faild
with pit file agin faild

Try this:
Install TWRP, go to Wipe > Advanced Wipe > tick System > Change File System > ext4 > Swipe.
Sent from my ASUS_Z00AD

krasCGQ said:
Try this:
Install TWRP, go to Wipe > Advanced Wipe > tick System > Change File System > ext4 > Swipe.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
picture

just flashy any stock rom and go to recovery (official recovery dont flash custom recovery) and wipe/factory reset after this reboot device and its work . (for me)

TheMegaFoxu said:
just flashy any stock rom and go to recovery (official recovery dont flash custom recovery) and wipe/factory reset after this reboot device and its work . (for me)
Click to expand...
Click to collapse
FAILED when Flash ROM and Rom part Odin
stock recovery all WIEP always E:failed to mount /system (Invalid argument)

Use Service Fimware (ROM Parts). In ODIN, tick the following options: Auto Reboot, Re-partition, Nand Erase All, Phone EFS Clear.
Make sure all corresponding files are put in the place (BL, AP, CP, CSC).
Let me know how it goes.
Sent from my ASUS_Z00AD

krasCGQ said:
Use Service Fimware (ROM Parts). In ODIN, tick the following options: Auto Reboot, Re-partition, Nand Erase All, Phone EFS Clear.
Make sure all corresponding files are put in the place (BL, AP, CP, CSC).
Let me know how it goes.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
FAILED Again

If I understood Who Search From Google
Allow Need to fix first adb Only then will it be possible Flash ROM
Something like that
http://www.selftechgenius.com/how-t...nvalid-argument-in-all-samsung-galaxy-phones/
but how to do it s4 i9500

Are you certain you have an I9500? Enter download mode and read off the model number given in the download screen.

Strephon Alkhalikoi said:
Are you certain you have an I9500? Enter download mode and read off the model number given in the download screen.
Click to expand...
Click to collapse
Sure before I even started

dragson said:
Sure before I even started
Click to expand...
Click to collapse
It sounds to me like a damaged EMMC chip.

Lennyz1988 said:
It sounds to me like a damaged EMMC chip.
Click to expand...
Click to collapse
can not be
If I understood Who Search From Google
Allow Need to fix first adb Only then will it be possible Flash ROM
Something like that
http://www.selftechgenius.com/how-t...nvalid-argument-in-all-samsung-galaxy-phones/
http://zidroid.com/how-to-fix-failed-to-mount-efs-for-galaxy-s3-gt-i9300/
but how to do it s4 i9500

I'm currently in this situation I entered to recovery mod

Bad chip. Have it serviced.

Strephon Alkhalikoi said:
Bad chip. Have it serviced.
Click to expand...
Click to collapse
You worng
If I understood Who Search From Google*
Allow Need to fix first adb Only then will it be possible Flash ROM
Something like that
http://www.selftechgenius.com/how-to...galaxy-phones/
but how to do it s4 i9500

You cannot automatically discount hardware problems simply because of something you have seen on the Internet. Until you have the device looked at, you simply do not know for sure what is wrong.
Now two of us have told you that you have a hardware problem. I personally don't care how you go about fixing it, but telling someone thy are wrong with no hard evidence to back it up is a symptom of a closed mind. It's rude.

I haver the same problame how o fiz My reading card?
---------- Post added at 12:48 AM ---------- Previous post was at 12:47 AM ----------
Strephon Alkhalikoi said:
Bad chip. Have it serviced.
Click to expand...
Click to collapse
dieselman6969 said:
I have the same problame how i fix My reading card?
Click to expand...
Click to collapse
Help me guys

Describe your problem.

Phone Stuck in Bootloop, can't use Odin to flash stock / recovery nor Kies [HELP!]

Hey there!
First of all, I'm quite new here, so please be nice. That doesn't mean I'm completely noob to flashing or Android phones in general.
I'm not sure what my phone model is (It's either SM-G900P or SM-G900F) since it's not 100% genuine. It is however Samsung Galaxy S5.
That means I bought it for a discounted price online, the seller claimed that only some internal parts were changed (with identical ones).
If this is not the right place to post, I'm sorry in advance.. it's just that I'm not entirely sure about my model (says G900P on the back of the phone,
I remember, though, checking in the settings in which it said G900F so I'm kind of lost here).
I have used my phone for a couple of months, and it worked completely fine.
Recently I got my phone stuck in a bootloop. It started from a camera app that didn't reduce the photo quality as much...
I had to change some permissions in my rooted phone and re-install the Samsung camera 3 app.
One thing led to another, and now I'm stuck in a bootloop.
This is my current state:
- I have my Samsung Galaxy S5 with TWRP 3.0.1.0 recovery working.
- Whenever I boot, it either gets stuck on the booting animation or shows it once and then boots into recovery (TWRP).
- I don't know how to get my phone to boot normally into (any) firmware.
Comments:
- I can boot into download mod, and Odin recognizes my phone (It errors on flashing, though).
- Whenever I boot I get KERNAL IS NOT SEANDROID ENFORCING, Set Warrantiy Bit: Kernal.
- Upon getting into Recovery mode (In the old Philz recovery. Now I have TWRP) , a message written at the bottom says: E: could not mount /data to setup /data/media Path!
- Sadly, my Knox counter is 0x1 (2). (not that my phone came with any warranty)
- My phone was Bought in Russia, it was made in Vietnam.
I have tried:
- Installing a couple of different roms (downloading zip into SD card, wiping data, cache, successfully installing).
(When I try to boot it either bootloops or boots into recovery after 1 try)
- Trying to use Odin (with different versions) to flash .tar.md5 STOCK firmware (if that's what it is).
(On flashing 900F firmware I get aboot auth problem, On flashing 900P firmware I get:
Output on phone:
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE(CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD: ENABLE
UDC START
SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1
Output in Odin3:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1BOA6_G900PSPT1BOA6_G900PVPU1BOA6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And it keeps on failing even with different versions of firmware.)
- On trying Kies or Kies 3 to emergency firmware update:
I keep on getting invalid model / serial number after typing varients models (SM-G928F/900F/900P) with my serial number (which is prob invalid).
- Using different PIT files while trying to flash different stock firmware (with all possible combinations) while using Odin.
(Same either aboot (auth fail) error or SW REV CHECK FAIL: [aboot]Fused 3 > Binary 1 error)
- Trying to Factory Reset using TWRP.
It states Failed and outputs:
Could not mount /data and unable to find crypto footer.
Failed to mount '/data' (Invalid argument)
Unable to recreate /data/media folder.
Updating partition details...
Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
Failed to mount '/data' (Invalid argument)
Full SELinux support is present.
Unable to mount /data/media/TWRP/.twrps
Failed to mount '/data' (Invalid argument)
Formatting Cache using make_ext4fs...
Updating partition details...
Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
Therefore, I can't see any possible solution to fix my bootloop problem.
I have wasted the last 2 days googling the **** out of it (and usually I find a solution),
but I couldn't find anything to fix me phone! I feel completely lost! Please, help me! :crying:
If you guys need anymore information, I'll reply quick and do my best to get everything you need in order to help.
Note that I did follow each step carefully on each solution that I've tried. Chances are very low for me to miss something.
(I even made sure Kies isn't running while flashing with Odin.. and so on)
Possible reasons for errors:
- Both Philz and TWRP recoveries can't mount '/data' to be able to factory reset!
- I don't know which stock firmware I need to flash with Odin (build / country??)
- Could be something went wrong in kernal or bootloader or modem or anything like that?
(I don't know what those things are so I'm not sure).
- All of the Odin versions I used aren't working with my phone? (3.04,3.07,3.09,3.10.7)
- I'm missing a speciifc PIT file to flash with the stock firmware?
- Something in the RW REV is messing things up (I don't know what that is).

Check what model it says in download mode, that is the correct model, but I have a feeling you have a fake S5, so no stock firmware will work, nor will ODIN as it is for genuine samsung phones only
Could try flashing TWRP recovery flashlable zip from Philz to replace your recovery, TWRP is a much more powerful recovery, might let you flash a custom ROM from TWRP

*Detection* said:
Check what model it says in download mode, that is the correct model, but I have a feeling you have a fake S5, so no stock firmware will work, nor will ODIN as it is for genuine samsung phones only
Could try flashing TWRP recovery flashlable zip from Philz to replace your recovery, TWRP is a much more powerful recovery, might let you flash a custom ROM from TWRP
Click to expand...
Click to collapse
Thanks for your quick response!
It says SM-G900P in download mode.
Are you saying that aboot auth fail and rev errors have to do with the possibility my phone isn't genuine?
Everything worked in this phone, just the way it should.. even the heartbeat censor.. it's all there.
I don't think my S5 is fake, rather it is part swapped or modified, but not a fake (replica) one.
I will try replacing to TWRP and installing 2 roms I have. :good:
Update:
- I have tried installing twrp-2.8.6.0-d802.zip through Philz recovery, it didn't work (error in zip status 7).
- I managed to install TWRP 3.0.1.0.
- I have tried installing PopWiz Telstra v5.0 rom using TWRP recovery, bootloop still persists.
While trying to Factory Reset using TWRP I get some ERRORS and it reports Failed. Phone log:
Could not mount /data and unable to find crypto footer.
Failed to mount '/data' (Invalid argument)
Unable to recreate /data/media folder.
Updating partition details...
Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
Failed to mount '/data' (Invalid argument)
Full SELinux support is present.
Unable to mount /data/media/TWRP/.twrps
Failed to mount '/data' (Invalid argument)
Formatting Cache using make_ext4fs...
Updating partition details...
Failed to mount '/data' (Invalid argument)
...done
Unable to mount storage
it keeps on repeating the same line that Philz stated in it's recovery.. unable to mount /data.
What does it mean? Also, should I Format Data? there's also an option for advanced wipe...

Samsung Galaxy S5 SM-G900P Bootloop FIX!!!
UPDATE!!!
Guys, I've finally managed to get this problem fixed. we can close this thread, but I'd like it to stay visible for
other people who might have the same problem.
If you have a Galaxy S5 SM-G900P (or SM-G900F/G928F) that is stuck in a bootloop, and nothing else works,
you might just get off with it by following these steps:
1. Download the latest TWRP Recovery.
(I used twrp-3.0.1-0-klte.img.tar)
2. Download CF auto root Odin3 v3.10.6 (for SM-G900F).
3. Download and install Samsung Kies or Kies 3.
(It doesn't quite matter as long as you install the built in Samsung USB phone driver that comes with it.)
4. Power off your phone completely. If needed, remove the phone cover and pop the battery out of it.
Make sure to reinsert the battery and close the cover to restore the phone's normal physical state. (optional)
5. Get your phone into Download mode by pressing and holding (both at the same time) the Volume Up, the Power and the home buttons.
(If your phone bootloops instead, repeat from step 4. If your phone booted into recovery, there might be an option to get into Download
mode through there. If not, repeat from step 4.)
6. Once in download mode, make sure to press volume up again if needed to continue.
7. Open the Task Manager and search for any process that is similar to Kies (by name and icon both).
It has an orange rectangle icon, the name might vary a bit. Make sure there is no such program running in the background.
8. Open up Odin (use admin rights if needed) and click AP.
9. Locate and chose twrp-3.0.1-0-klte.img, which you have downloaded before in step 1.
10. Connect the (original) USB cable to your phone and to your computer.
By now your phone is in Download mode, Odin 3 is open and has the twrp recovry selected in it's AP,
and a message says in Odin "added", it shows one blue rectangle in the ID:COM's tab.
11. Click on the Start button in Odin, and wait until it says Finish or Reset.
Your phone should reset now and try to boot again (which will make it bootloop). If that happens,
Power off the phone either by holding the power button for 10 seconds, or by popping the battery out
and reinserting it. Alternatively, the phone will boot into TWRP recovery. If so, skip step 12.
12. Power off your phone (if its on) and boot into recovery by pressing and holding the Volume down,
The Power and the Home buttons at the same time.
13. TWRP Recovery should boot up. Swipe right to allow modifications.
14. Tap the Wipe button.
15. Tap the Format Data button.
16. Type "yes" and confirm the format.
Done!
after rebooting your phone should boot normally with the installed firmware.
If your phone persists on bootlooping, install a custom firmware fitting your device (SM-G900P) -
There's plenty on tutorials on how to do that, and after the install boot into recovery and format data again
(Steps 12-16)
I would have posted links to all 3 files that you need (Samsung Kies, TWRP recovery, CF Odin v3.10.6) but I'm new to XDA, so I can't really post any links.
Good luck! If you guys have any questions about this, do feel free to post here or contact me personally. :angel:

G900P it is then
Pleased you got it sorted

Hi
I did what u did but i try to enter recovery
It says recovery seandroid enforcing

There is No PIT Partition

Hey!
I kinda screwed up, horribly.
I initially had a Verizon S7 Edge, but I was on T-Mobile service so I decided to follow this guide: http://forum.xda-developers.com/ver...de-flashing-sm-935u-firmware-verizon-t3415145 and it worked! Then I thought, maybe if I flash the T-Mobile firmware, it would work even better, and it did! Then recently I decided that I wanted to go back to unlocked firmware, so I tried flashing it again. Thats when everything went to ****. It failed, and said something about "sw rev check fail fused 3 binary 2", and so I tried again and it failed. I rebooted thinking that maybe the old os would be intact but it booted to recovery mode saying that it couldn't mount any of the partitions. So I tried to reflash the T-Mobile firmware again and now its giving an error about how there is no PIT partition. From googling online, I think I need to flash a .pit file or something. I could only find PIT files for the international unlocked s7 edge. Does anyone have the PIT files for the AT&T/Verizon/Unlocked S7 Edge (preferred, because I can then flash the U firmware), or even the T-Mobile PIT file?
Any help would be greatly appreciated.
Thanks.
EDIT: I rebooted the device and it took me to recovery and complained about not being able to mount /cache and /system. I fixed the /cache issue by using the "wipe cache partition" option, but now it is saying "dm-verity verification failed. E: failed to mount /system (Invalid argument)"

I tried flashing a PIT/ROM combo for tmobile that I found online but now im getting this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Please help!
EDIT: It gave that same weird binary thing.

Pit file zipped on the original csc.zip... Unpack csc zip, and copy pit...

DenyDeBeyle said:
Pit file zipped on the original csc.zip... Unpack csc zip, and copy pit...
Click to expand...
Click to collapse
Thank you, but I just figured out how to solve the issue. I found the latest firmware from TMOBILE and flashed that. Apparently I had updated my phone so the bootloader was version 3 instead of version 2 or something and you can downgrade. Im not sure if thats the right explanation, but my phone works now, so thats good.
Thank you.

Download G935 U 4files firmware (qualcomm edition, no verison-tmobile-sprint-att bloatware).
My g935a phone is g935u firmware, and work perfectly.

DenyDeBeyle said:
Download G935 U 4files firmware (qualcomm edition, no verison-tmobile-sprint-att bloatware).
My g935a phone is g935u firmware, and work perfectly.
Click to expand...
Click to collapse
I have already tried that and failed. I think the TMOBILE bootloader is more updated or something and so you cant flash to a previous version of the bootloader. IDK, maybe someone can explain it better?

Nahtnam, do you solve that problem, just now I have exactly the same

emavas said:
Nahtnam, do you solve that problem, just now I have exactly the same
Click to expand...
Click to collapse
The issue was that I was I was on bootloader version 4, and I tried to flash a firmware with bootloader version 3. I ended up finding the firmware with bootloader version 4 and flashed that.

hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
---------- Post added at 11:43 AM ---------- Previous post was at 11:41 AM ----------
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone