will overclocking / underclocking / changing cpu governor be possible with a knox-enabled kernel?
i have a canadian version of note 3 still with knox 0x0, rooted, and using knox.
when trying to change cpu governor, it wont work with stock kernel
is there a workaround for this or none?
TIA and highly appreciated
No, the kernel settings are embedded it the kernel itself so it will not work and no Samsung's stock kernel does not allow overclocking I recommend you LeanKernel 3.10, it is fast and stable supports OC to 2.7ghz, fast and stable for daily use
N9005 NH1 32GB Stock debloated rooted ROM
This_Guyse said:
No, the kernel settings are embedded it the kernel itself so it will not work and no Samsung's stock kernel does not allow overclocking I recommend you LeanKernel 3.10, it is fast and stable supports OC to 2.7ghz, fast and stable for daily use
N9005 NH1 32GB Stock debloated rooted ROM
Click to expand...
Click to collapse
Well with our note 3's we are safe on changing kernels anyway with being able to flash knox back. Mighta try that . . . thanks
although -- i personally use knox thats why its a hard decision to change kernels
Related
Hello,
Can anyone tell me wich governor make the fast performance with galaxy S4 Omega 28 and Kernel KT-SGS4 .
Best Regards
The governor called "performance". I wouldn't recommend it though.
Recomended
Lennyz1988 said:
The governor called "performance". I wouldn't recommend it though.
Click to expand...
Click to collapse
What is you recomendation ?
Use the standard governer. Using a different governer would not gain you much benefit (if any).
Help
Can someone plz provided me a download link for kt kernel for s4 gt-i9500... I'm running on resussrection remix Android 5.1.1 I checked ktoonsez website but nothing seems to be working ...ktweaks is installing but kernel is not installing.. I checked with set cpu... Plz help
First of all i would like to thank the community for helping everyone here!
What my current problem is :
I had installed echoe rom on my note 3 till today. Reason of unistall and back to stock was the insane draining of battery.
Anyway i installed N9005XXUENB7_N9005DBTENB2_DBT so i'm back to stock.
Q : do i have to install a custom kernel again after installing the one that provided the echoe rom ?
and if so, where can i find that kernel ?
Thank you in advance.
:angel:
Did you find out? Coz I am thinking to try echoe rom and kernel.
If you install an rom you can stick with rom kernels.
If rom is custom stock you could find some good kernels. Civato, ael, etc
Note 3 rooted knox 1, my last Samsuck crap. I want freedom. Stay away from Samsuck!
Ok from what I found out is if you stick custom rom stick with stock kernel to give you the best battery life, custom kernel are for running custom script etc. I have also had Exellent battery life with custom rom and stock kernel. Try it you will be surprised also make sure the baseband modem is of your network provider so supported by network provider to get the best possible signal.
Sent from my SM-N9005 using Tapatalk
Echoe comes with ael kernel; doesn't it? If so, great kernel for battery and performance.
Hi, I have a Samsung Galaxy Note 3 N9005.
I installed a custom recovery and rom 2 days ago, first rom being phronesis 2.0 rom.
From there I tried overclocking my device but all apps show me 2.26ghz is the max my device can go, apps used include: kernal auditor, setcpu, trickster mod and no frills cpu control.
I searched the forums a bit and so I thought flashing a new kernel would help. I flashed Arter97s kernel and it still didn't allow me to overclock higher than 2.26 ghz, then I tried audax's kernel with no luck.
Then today I moved on to Tesla 5.1.1 Rom, and I still cannot overclock higher
I yet again reflashed arter97s kernel and still I am having no luck.
Any help?
Thanks
owner eod
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Overclock
emuandco said:
This is the limitation of the kernel. It provides the frequencies it supports, so you need a kernel with OC support. I do not OC, so sorry, no clue which to take which even is allowed to talk about here. ShinTo was supporting it AFAIK, but they had to leave due to not providing the source and thus violating the GPL.
Click to expand...
Click to collapse
I am able to overclock my 9005 up to 2.7GHz with mentioned apps. I am not sure which kernal I am using. I have Phronesis 5.0 on and am getting ready to flash 5.2. The only shlep is that I need to set the frequency after each reboot. I wish this could be included in a kernal.
Try using leankernel: http://forum.xda-developers.com/showthread.php?t=2488082 I had same kind of problem then I flashed this and used kernel auditor. Now everything works perfectly!
Can't Flash Kernel on note 3 sm-n900
I have been looking for solution at multiple sites. Hope to get answer here. I have downloaded a stock rom lollipop for my note 3 sm-n900.
I was successful at overclocking it to 2.1ghz but i want it to be at 2.7ghz and the current kernel does not support it.
I tried flashing three different kernels lk-hltemo 6..., lk-hlte v6 and lk-hlteu 6... using CWM and TWRP but kernel didn't flash.
Somebody pleaseeeee helppppp....
Read the thread .
But if you dont know what you are doing you will brick your phone .
Hello , im using redmi 2 2gb version
I had problem with max cpu frequency
When cpu usage 95%+ max frequency lock to 800mhz and its make me feel lag, and that happen with chrome or playing video
Even with kernel adiutor change to 1.4ghz still didnt lock
Currently I use custom rom Tesla official stable
And thats happen too on mokee mm stable
Sorry for my english
Thanks
Best option available in my experience is dont use custom kernels at all. They may be buggy at certain task.
Stable Kernel which comes stock with the rom is best option. No bugs in multitasking and no more lags at all.
Riyanx55tu said:
Best option available in my experience is dont use custom kernels at all. They may be buggy at certain task.
Stable Kernel which comes stock with the rom is best option. No bugs in multitasking and no more lags at all.
Click to expand...
Click to collapse
I use stock kernel always use stock kernel
Try Viper OS.
Disable MPDecision
(Reference)
What is the best kernel for tw rom?
I need performance and battery life.
I don't use fingerprint.
stock kernel
For me it's Boeffla Kernel.
What about Sparkplug?
At the moment i'm, using smartpack kernel. Working stable. You can un dervolt and set the RGB Level. Useful for Nightviewing.
But if you don't need any extgras i would prefer stock kernel. Good Battery, performance and stability.
I use stock kernel with Superlite stock rom. I noticed that phone is very hot sometime
Thread moved to Q&A
I flashed the last stock CRA2 with stock kernel and it is very good