I'm using CM11 by Quarx on my Defy after having used CM7.1, CM9, CM 10 .... I'm very happy about that Quarx's work but now I changed my phone and buyed a MOTO G !
My Defy was "Simlocked" when I buyed it in France (at Orange telephony provider) : but I get it desimlocked after few months with the code that Orange gave to me : I could use on over telephony provider SIM without problem (after that I put my Orange SIM till now and flashed my phone with all Quarx ROM's).
But last week when I tried to put an other provider SIM it said that it was simlocked and the code isn't working ....
Is it possible that flashing new rom can delete unsimlock ? I tried asking new code to my provider but they always send me the same ...
Thanks for helping me
Nobody had his Defy simlocked after using CM11 ?
Hi ! Since then I have not had that problem.
But why not try to flash a sbf to test ?
Related
so.. I have this phone parked in my drawer for almost a month and finally decided to seek for online help.
Last rom installed is cm7 (but i've tryed several others cm7.2 cm9 cm10 cm10.1). I've tryed using both the baseband switcher included in the rom settings (where avaiable) and the standalone apk. I live in Italy so I chose Italy in the baseband selection (again.. I've tryed several others basebands just in case...). The sim card is a working VodafoneIT sim card and it is recognized by the phone.
the problem is that my phone does not lock to any network and I see the message "emergency calls only".
I also tryed to flash original sbf from here.
I don't know if it matters but logcat reports these errors:
Code:
E/GSM ( 6427): RIL implementation has returned an error where it must succeedcom.android.internal.telephony.CommandExcep tion: GENERIC_FAILURE
D/RILSWITCH( 2018): RILD unknown at cell -1
E/GSM ( 6427): Wrong network type: 0
I remember that at the time of when the problem showed up the first time, looking on the internet, in addition to the advice of changing the baseband, I found a thread where someone was talking about a possible hardware fail.. but I can't find it anymore.
any suggestion?
thanks
up????
i'm also having this problem
anyone found the fix?
Does the same error occur in stock? If so then I think it's a hardware issue. You could try a different sbf of your carrier and region(a newer one), but I do not think it would help much.
Sent from my MB526 using Tapatalk 2
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
romanoqz said:
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
Click to expand...
Click to collapse
Try with different bands from your country or another country with the same frequencies.
Pull the batery out for a few seconds.
Use the latest version of the standard app (not defy parts).
Regards,
It works for me with a different company of my country
My chip is Personal_AR and with this don't work, but with Claro_Ar works fine...
THX it's make me crazy
Hi,
I can not get signal on a TIM chip on 07/20 CM11.
I tried a lot of different baseband and my VIVO chip works correctly in that ROM.
Can anyone help me with this TIM chip?
I will use my phone as a modem, tethering internet to my notebook.
Thx all.
Today I have tried a new version of CM11, from 07/25/2014, and can not get my SIM card to work with my Defy+.
When in another phone, the SIM card works and I can get signal from TIM Brasil.
Can anyone help me? I need my card working until tomorow night.
Thx.
Today I tried all the basebands that I could to make my SIM card to work.
There is a way to check some log files or debug info in order to find some clue about the problem?
Thx.
Download defy baseband switcher 4.0 (blue icon), there's a Brazil TIM baseband
My problem was not an incorrect baseband.
My phone was locked by my carrier and i had to revert to stock ROM to unlock it.
After that, CM11 started to work with my new SIM card only when I did a factory restore of my phone and start CM11 from scratch. With my older data, CM11 yet was locking my new card.
Thanks.
Hello . I have problem . I install cm 11 nightly (12/8) and when my phone boot to welcome screen, my phone have problem unlock sim-card....I get thhe pin and it say unlocking sim card...but i waiting for 10 minutes and when my screen go to black, i must get the pin again !! Whats wrong ?
kiosk123 said:
Hello . I have problem . I install cm 11 nightly (12/8) and when my phone boot to welcome screen, my phone have problem unlock sim-card....I get thhe pin and it say unlocking sim card...but i waiting for 10 minutes and when my screen go to black, i must get the pin again !! Whats wrong ?
Click to expand...
Click to collapse
try updating your baseband to a newer version
kiosk123 said:
Hello . I have problem . I install cm 11 nightly (12/8) and when my phone boot to welcome screen, my phone have problem unlock sim-card....I get thhe pin and it say unlocking sim card...but i waiting for 10 minutes and when my screen go to black, i must get the pin again !! Whats wrong ?
Click to expand...
Click to collapse
from my previous testing sim unlock doesn't work (doesn't fully unlock sim - You get network but no mobile data) - use a stock based rom or cm7 and remove the sim lock before flashing cm11
If cm11 doesn't boot with the sim then change your baseband
marcussmith2626 said:
from my previous testing sim unlock doesn't work (doesn't fully unlock sim - You get network but no mobile data) - use a stock based rom or cm7 and remove the sim lock before flashing cm11
If cm11 doesn't boot with the sim then change your baseband
Click to expand...
Click to collapse
I have latest baseband installed (S5360DDMD1) , and i have question : Exists stable cyanogenmod 11 on GT-S5360 ?
kiosk123 said:
I have latest baseband installed (S5360DDMD1) , and i have question : Exists stable cyanogenmod 11 on GT-S5360 ?
Click to expand...
Click to collapse
Read the 1st post of dev thread for latest news and current issues
Change baseband if you have problems with blackscreen on boot
My motorola defy + MB526 was sim unlocked but after I flashed and replaced many roms ( CM10 & CM10.2 & original rom )
It locked sim !!! and it asks me for SIM NETWORK CODE !!!!
how and why ??
and how I return it to unlocked ?
NOTE : I Bought his mobile as a used one
Why Blue ??? I hate blue !!!
Did it get locked after you flashed first rom? or did it work fine and locked after many flashes?
sorry for the blue hehehehe
but exactly I dont know
but may be after I installed the file name
DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf
it was the only way to return my phone work after I tried to install ( new_boostrap ( twrp ) ) it briked the mobile
after I read and tried too much then one way success to return it back it is this long name file .sbf flashed by ( RSD lite )
any help to solve ? or at least to understand !!
Now I nonce that the IMEI has changed is it the reason to blocked ???
Hi,
i'm beginner in phones reparation, yesterday i tried to flashing motorola defy mb525 , after finishing, unfortunately i had a problem with network because i need pin for unlocking sim , i tried to resolve by installing custom rom (cyanogenmod cm11) , but it still the same problem. i hope that you can give some ideas to fix it
abdellwahed1 said:
Hi,
i'm beginner in phones reparation, yesterday i tried to flashing motorola defy mb525 , after finishing, unfortunately i had a problem with network because i need pin for unlocking sim , i tried to resolve by installing custom rom (cyanogenmod cm11) , but it still the same problem. i hope that you can give some ideas to fix it
Click to expand...
Click to collapse
I think it's the sim that is locked rather than phone, if you insert this sim in other phone it will ask for pin as well, if you are not sure what's the pin for the sim then your service provider can help you.