I booted into to recovery through ROM manager and tried to flash CM 10.2 but even leaving it for 30 minutes it just keeps showing the CM boot logo, Am I in a boot loop if so how do I get out of it?
flash another cwm and after this a new rom,that shall be working,good luck
TheGamerCatHD said:
I booted into to recovery through ROM manager and tried to flash CM 10.2 but even leaving it for 30 minutes it just keeps showing the CM boot logo, Am I in a boot loop if so how do I get out of it?
Click to expand...
Click to collapse
Did you wipe data/factory reset?
Goto recovery and do that if not already done.
Wipe also dalvik cache from advanced
Your phone will boot into CM10.2
That was my problem, I wiped dalvik cache and regular cache and now I'm running CM 10.2 and will install a KK ROM later today. thanks for the help
Sent from my Ascend Y300 using XDA Free mobile app
skyinfo said:
Did you wipe data/factory reset?
Goto recovery and do that if not already done.
Wipe also dalvik cache from advanced
Your phone will boot into CM10.2
Click to expand...
Click to collapse
Although I do have a different issue no matter what I do I can not, What so ever change my kernel. I did a factory reset through TWRP and no matter what I do I cannot change my kernel. Anyone know what's wrong
Thanks
EDIT-I'm trying to flask the same kernel as yours the S1Kernel
Guys i keep getting thsame problem with my L5 e610 every time i flash a rom my screen stops working.
The phone boots normaly and it strts but the screen is totaly dead, if i use KDZ to get back to stock it works fine, but when i flash a rom it wont work.
Iv tried every thing, from installing the rom zip and rebooting to install gapps. To doing a whipe and reset every time i flash a rom and gaaps.
My cwm is 6.0.5.0
Nesh89 said:
Guys i keep getting thsame problem with my L5 e610 every time i flash a rom my screen stops working.
The phone boots normaly and it strts but the screen is totaly dead, if i use KDZ to get back to stock it works fine, but when i flash a rom it wont work.
Iv tried every thing, from installing the rom zip and rebooting to install gapps. To doing a whipe and reset every time i flash a rom and gaaps.
My cwm is 6.0.5.0
Click to expand...
Click to collapse
Try updating your CWM to 6.0.4.8
Link: https://www.mediafire.com/?l8mpej31m3k81tj
Hope this helps!
Yeah i did, still nothing, tried to flashing karnel to. But that didnt work eather.
What version of CM or other ROM are you trying to flash?
Sent from my Ascend Y300 using XDA Free mobile app
Im not on CM, i tried [AOKP4_E612-v2] and [pa_e610-4.4-20140625]
thoes are the roms i tried.
Make sure your using CWM 6.0.4.8, Remember to wipe your cache and dalvik cache and try to install this ROM
Link: http://www.mediafire.com/?8rq7jsniv5gasb7
P.S- I do actually have an L5 which I have successfully rooted and flashed ROMs just my daily driver is a rooted Y300 running CM11 nightlys.
Hope this helps
Sent from my Ascend Y300 using XDA Free mobile app
Actualy im downloading an update for the paranoid rom, im going to trie it. Yes my cwm is 6.0.4.8 and im not sure if this paranoid will work but il defenetly trie the rom you posted
And i whiped every thing and formated systeam to.
Who knows whats wrong with this damn thing.
Im on my L7 p705 its stock and it sucks, but i cant flash any thing on it yet till i take care of my L5 i use bothe phones daylie. And thank you for your support buddy
---------- Post added at 11:48 PM ---------- Previous post was at 11:03 PM ----------
Damn, still not working! the screen is still frosen
---------- Post added 7th October 2014 at 12:35 AM ---------- Previous post was 6th October 2014 at 11:48 PM ----------
I tried flashin e610 3.4.0 karnel and e612 3.40 karnel. Still nothing
Nesh89 said:
Actualy im downloading an update for the paranoid rom, im going to trie it. Yes my cwm is 6.0.4.8 and im not sure if this paranoid will work but il defenetly trie the rom you posted
And i whiped every thing and formated systeam to.
Who knows whats wrong with this damn thing.
Im on my L7 p705 its stock and it sucks, but i cant flash any thing on it yet till i take care of my L5 i use bothe phones daylie. And thank you for your support buddy
---------- Post added at 11:48 PM ---------- Previous post was at 11:03 PM ----------
Damn, still not working! the screen is still frosen
Click to expand...
Click to collapse
Can you load you the stock ROM onto an SD card?
If you can try doing a factory reset and flashing the CM11 I linked you to in the post above
Hope this helps
Well i dont have a stock rom, i didnt do a backup of it. But is it posible to flash a stock rom with cwm? And will it install normaly with cwm?
Btw if it can, do you maybe have a stock zip? I dont have a pc atm to go in to kdz.
Sad to say I don't think you'd be able to flash a stock ROM without a PC, Just because of the .kdz file extension. So you're telling me after trying to flash 3 ROMs, every time you get a blank screen.
Can you send me a picture of the log you get after trying to install a custom ROM or even better send me a video of what's going on.
P.S-Are you getting a black or blank screen or a frozen screen?
Sent from my Ascend Y300 using XDA Free mobile app
Nesh89 said:
Well i dont have a stock rom, i didnt do a backup of it. But is it posible to flash a stock rom with cwm? And will it install normaly with cwm?
Btw if it can, do you maybe have a stock zip? I dont have a pc atm to go in to kdz.
Click to expand...
Click to collapse
Sad to say I don't think you'd be able to flash a stock ROM without a PC, Just because of the .kdz file extension. So you're telling me after trying to flash 3 ROMs, every time you get a blank screen.
Can you send me a picture of the log you get after trying to install a custom ROM or even better send me a video of what's going on.
P.S-Are you getting a black or blank screen or a frozen screen?
Sent from my Ascend Y300 using XDA Free mobile app
Ok i uploaded the install bug on to youtube
http://m.youtube.com/watch?v=ZTlMQPmrbxM
Heres the url.
The video is called LG L5 e610 frozen after ROM installation.
Ok i re installd stock with kdz, flashed recovery, flashed 6.0.4.8 and iv tried multiple roms inkluding yours, iv tried installing with format system and with oud just whiping catch and delvic. Every time i boot a rom the screen wont work, same thing with every rom. Il just go back to stock. I cant beleave that my phone cant install a rom how stupid.
Nesh89 said:
Ok i re installd stock with kdz, flashed recovery, flashed 6.0.4.8 and iv tried multiple roms inkluding yours, iv tried installing with format system and with oud just whiping catch and delvic. Every time i boot a rom the screen wont work, same thing with every rom. Il just go back to stock. I cant beleave that my phone cant install a rom how stupid.
Click to expand...
Click to collapse
Try wiping everything besides /system and try flashing the rom
Tell me your results
Hope this helps
Ok i didnt trie that yet, il trie it tonight.
Sent from my LG-P705 using XDA Free mobile app
Related
I unlocked and rooted my tablet awhile ago when i first got it.
Now i had the bright idea to flash cwm on it and I can't fix it.
I can get twrp to start i cleared the cache dalvik and other format
it several times and still no results any suggestions?
On twrp it says no OS installed. Did it delete it when i formatted it?
It also says its an insecure image rom i think
I'm thinking i need to flash a stock rom but i'm not sure how since it's not really letting me
May I knw whch tab u r usng and did u tried to flash a custom rom
your's
ajeteja.
---------- Post added at 03:58 PM ---------- Previous post was at 03:58 PM ----------
Flash a custom rom
your's
ajeteja.
cwm fail
i just tried to flash cwm i'm not sure what you mean by tab. twrp v 2.5.0.0? and i downloaded the cwm from the app in the play store
If your twrp is working then flash a custom rom fir nexus
your's
ajeteja.
kamedende said:
I unlocked and rooted my tablet awhile ago when i first got it.
Now i had the bright idea to flash cwm on it and I can't fix it.
I can get twrp to start i cleared the cache dalvik and other format
it several times and still no results any suggestions?
On twrp it says no OS installed. Did it delete it when i formatted it?
It also says its an insecure image rom i think
I'm thinking i need to flash a stock rom but i'm not sure how since it's not really letting me
Click to expand...
Click to collapse
Wugfresh toolkit.
This isn't my very first time with flashing/rooting/etc. but I'm not that adept with it.
Got my S4 2 days ago but managed to get time today to work on it. I rooted successfully and everything was running perfect. I flashed over the newest Beanstalk ROM w/ gapps and it ran fine the first time it ran.
I can't get passed the Samsung Galaxy S4 boot logo every time I try to reboot the phone though...
If I wipe the cache/dalvik and reflash it still doesn't boot passed logo.
If I wipe the cache/dalvik and then wipe data (including the internal SD card, completely wiping it clean), flashing the ROM will work the first time it runs; once I reboot or just power it off then power it back on, stuck at Galaxy S4 logo... I let the ROM run first time through, input only what is needed to get to the home screen (google account/wifi setup/phone name/etc.), then I've tried rebooting it, shutting it down and powering it back up, letting everything update and waiting half an hour and restarting it... all have the same result, stuck at boot logo
I'm using TWRP, I have a recovery for stock but I don't want to use stock.
If anyone can help me out I'd appreciate it.
Try flashing a different compatible kernel.
ObrienDave said:
Try flashing a different compatible kernel.
Click to expand...
Click to collapse
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Spazzzin said:
This is EXACTLY what I was about to try... I'm literally reflashing the ROM fresh right now, going to put the kernel on the SD card, then reboot into recovery and wiping cache then flashing the kernel.
Will using a recovery that was made on a different kernel have any effect if I decide to use the recovery? I've heard bad things about flashing the wrong kernel (even though I know the one I'm about to use is the correct one) and really screwing stuff up if not done properly. I just want to make sure I don't screw anything up permanently.
Thanks.
Click to expand...
Click to collapse
Use twrp 2.5.0.2 because if your using 2.6 its bringing problems. Also report this to their thread for better help
Sent from my SPH-L720 using xda app-developers app
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
ObrienDave said:
Since there are no recovery categories according to this page,
http://forum.xda-developers.com/showthread.php?t=2303917
I don't see where it would matter. No guarantees though.
I do know it is ESSENTIAL to match the type (TW or AOSP) ROM and kernel to avoid major problems.
I also recommend TWRP 2.5.0.2
D/L TWRP from here:
http://techerrata.com/browse/twrp2/jfltespr
Click to expand...
Click to collapse
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Spazzzin said:
How do you go about installing TWRP? I used Goomanager and installed it from there when I was following the rooting guide
Click to expand...
Click to collapse
Just flash it by odin by the link provided above. Make sure to use the tar file v 2.5.0.2
Sent from my SPH-L720 using xda app-developers app
---------- Post added at 09:22 PM ---------- Previous post was at 09:19 PM ----------
Spazzzin said:
Flashing a different kernel didn't do anything, I still keep getting stuck at the boot logo :/
Click to expand...
Click to collapse
By the way can you provide the steps and which files you flashing. Also redownload everything could be a bad download. Make sure to download them in computer and transfer them to your sd card
Sent from my SPH-L720 using xda app-developers app
I did a fresh install of the LiquidSmooth ROM and it's not hanging at boot logo whenever I reboot, and everything is working well. I suppose I'll stick with this for a while.
For my steps trying Beanstalk:
Boot into recovery (TWRP 2.6.0.0)
Factory reset;wipe cache/dalvik
Format Data
Factory reset;wipe cache/dalvik
Install ROM + Gapps
Wipe cache/dalvik
Reboot
I then tried doing that exact process, after letting it boot once I rebooted into recovery and flashed KT Kernel and wiped then rebooted and it hung at boot logo.
I did it again but I installed ROM + Gapps + Kernel then wiped then rebooted and it still hung at boot logo.
I'll download and prepare a new install of Beanstalk and give it another try tomorrow. I'll make sure to backup Liquid in case I want to switch back.
Thanks again for the help!
Glad it's working out for you.
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Spazzzin said:
If I may ask here; how do I know if a certain kernel is compatible with a ROM? I know to match the version (4.2, 4.3. etc,) and base (AOSP/ TW) but is there anything else specific that I need to watch out for that could cause problems with flashing a kernel on a ROM?
Click to expand...
Click to collapse
Not really unless the rom dev for some reason doesn't recommend using a certain one. Kernels will act differently for everyone even on the same device with the same rom. Just need to flash them and find out which one works the best for you (battery life, overheating, smoothness, etc).
Always have a backup handy just in case something doesn't work right.
Hi!
I have a EU i9505, rooted with Jamal GE ROM, September update.
I tried installing KTOONsez, both version, but the phone just stays tuck at the Galaxy boot logo
si I have to clear both cache and reinstall the ROM
I tried with Chronic Kernel, same issue...phone stuck at Google 4 circles boot logo.... so I cleaned cache and reinstalled rom... BUT now the phone is not booting anymore
As soon as the boot finishes I see for a while the desktop (with the STD wallpaper and wrong time/date) andthan it reboots....
HELLLP!!!!!
Sounds like something has gone wrong with the installation process and now nothing works. I personally would now install a stock Rom via Odin and get the phone working again. Then start again installing your rom of choice. Ensure that you use an old stock firmware as newer versions have the fuse security feature. What recovery did you use. I had similar issues with Philz so now I use official CMW.
Sent from my GT-I9505 using XDA Premium 4 mobile app
HANDSY said:
Sounds like something has gone wrong [...]
Click to expand...
Click to collapse
Thank you, I give it a try! I did a full wipe and reinstalled Jamal AOSP GE. Now it is working again.
I will remove PhilZ, put CWM, than flash OMEGA + new kernel
theluke79 said:
Thank you, I give it a try! I did a full wipe and reinstalled Jamal AOSP GE. Now it is working again.
I will remove PhilZ, put CWM, than flash OMEGA + new kernel
Click to expand...
Click to collapse
New ROM, same issue...if I install a new kernel, the device just reboots... I will try Cwm vs philz
Ok so lately I have noticed that my Phone is taking way to long to boot. When a normal l7 would normal boot the phone, it should got the the LG logo for about 10 sec and then after that it should go to(in this case the Carbon fiber boot animation) for about 30 sec +
But the problem is with my phone the LG logo takes 2min + till it moves to the Carbon fiber boot animation then about 1 min for the boot of the carbon OS (P.S just a side note, it did it with slim bean and CM and still no luck)
I have also used CWM to clear/F reset everything, but it has not made a difference.
Could anyone help me out here?
Is there a bootloader or kernel i need to flash to fix this? or is it because my CWM may be outdated(Shouldent matter) and again I may of missed somthing in CWM so still point out the basics <--These are just ideas
On another side note the phone is a
-p705
-32GB Micro SD card in it
- cwm 6.0.2.8
-Kernel: 3.4.4--Cr3pT-OC [email protected] #1 Sat Feb 8 04:34:03 EET 2014
-(If any more info is needed, just ask)
Link to carbon ROM: http://forum.xda-developers.com/showthread.php?t=2638321
See if it boots quicker without your microsd card, if it does, then there's your problem. There's a lot of fake/faulty cards being sold on the net.
Otherwise, the LG logo shouldn't be there for 2 min, reflash stock via KDZ.
Sent from my LG-p705 using Tapatalk
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
DarkN3ss61 said:
BUMP!
Im coming back from the dead, as I have decided to try using my P705 again, and I have tried removing the SD card and still no luck, any help?
can someone give me a link on how I go back to stock so I can start again?
Click to expand...
Click to collapse
You need kdz updater to go back to stock, also when you get cwm again
flash cwm 6.0.4.9
Sent from my LG-P705
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
DarkN3ss61 said:
I have just done that and there has been no change in the LG logo time(bootloader) but once it gets to the room logo it's much faster. But still slow on the first half
Click to expand...
Click to collapse
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Nesh89 said:
i have a p705, i have a problem. I cant use any rom thets over 4.1.2
Sent from my LG-P705
Click to expand...
Click to collapse
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Paget96 said:
how??
Do you have CWM6.0.4.9????
I can't now provide you a link, but type on youtube "LG L7 (root,bootloader,CWM"
Then in description is a link.
Download it and flash it with KDZ.
That is rom for P700 with root, unlocked bootloader and CWM.
Then flash CWM6.0.4.9 for P705
Than download idk cyanhacker or cm11 by imer choose. . bit take care that ypu use rom for P705
Then in updater-script change from P705 to P700,because that (((p700 kdz rom)))
Flash rom, and that's it.
Here is an instructions to flash
Wipe data/factory reset
Wipe cache
Mount system
Format system
Wipe dalvik-cacje
Flash rom
Wipe cache
Wipe dalvik cache
Flash GAPPS
Wipe cache
Wipe dalvik cavhe
Reboot.
Click to expand...
Click to collapse
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Nesh89 said:
i have cwm 6.0.4.9 i made a few ports and mods my self so i kind of know what im doing,
its a problem with the phone.
Sent from my LG-P705
Click to expand...
Click to collapse
Ok, but believe me
Try this
Paget96 said:
Ok, but believe me
Try this
Click to expand...
Click to collapse
ok when i find the time il do it
Sent from my LG-P705
My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
K3v1n L said:
My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
Click to expand...
Click to collapse
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Paget96 said:
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Click to expand...
Click to collapse
Write instractions plz
Paget96 said:
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Click to expand...
Click to collapse
Can you write , how do install via usb ? I cant put files to memory card
K3v1n L said:
Write instractions plz
Click to expand...
Click to collapse
Flash cwm 6.0.4.9 for L7;P700
Reboot recovery
Wipe data
Wipe cache
Mount system (too necessary)
Format system
Wipe dalvik-cache
Install zip (flash system)
Wipe cache
Wipe dalvik-cache
Flash GAPPS
Wipe cache
Wipe dalvik-cache
Reboot device
Thats all, follow every step.
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
K3v1n L said:
Can you write , how do install via usb ? I cant put files to memory card
Click to expand...
Click to collapse
Use other device to put files on SD
Use sdcard reader or Digital camera or other mobile phone.
deem that wont work for me
Paget96 said:
Flash cwm 6.0.4.9 for L7;P700
Reboot recovery
Wipe data
Wipe cache
Mount system (too necessary)
Format system
Wipe dalvik-cache
Install zip (flash system)
Wipe cache
Wipe dalvik-cache
Flash GAPPS
Wipe cache
Wipe dalvik-cache
Reboot device
Thats all, follow every step.
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
Use other device to put files on SD
Use sdcard reader or Digital camera or other mobile phone.
Click to expand...
Click to collapse
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
K3v1n L said:
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
Click to expand...
Click to collapse
Did you flash 6.0.4.9 recovery??
Ok, if that all wont work, rflash your device with KDZ.
Find on youtube full tutorial, search: L7 KDZ tutorial.
K3v1n L said:
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
Click to expand...
Click to collapse
its a bit strange to me that your stuck in recovery, usually if you flash recovery and it formats system (happens some times) if you make a clean install the rom should boot.
Last thing you can try is to format every thing in this order.
Go to mounts and storage.
Mount/system
Mount/data
Mount/catch
Format/system
Format/data
Format/catch
Go to advanced and whipe delvic catch
Then just follow the rest of instructions that @Paget96 said.
But yes if that doesnt work flash via kdz
Sent from my LG-P700 using XDA Free mobile app
K3v1n L said:
My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
Click to expand...
Click to collapse
It's totally strange.You mean when you reboot system from recovery, it boots back to the recovery? What rom did you actually flash?
Sent from my LG-E610 using XDA Free mobile app
Replay for you
junephel said:
It's totally strange.You mean when you reboot system from recovery, it boots back to the recovery? What rom did you actually flash?
Sent from my LG-E610 using XDA Free mobile app
Click to expand...
Click to collapse
yes exactly, i had a stock rom , and now i have a stock rom again, and its working, i used kDZ and flashed new stock rom , and suddenly my phone starts to normaly again. But when i flashed custom rom with Clockworkmod, then it was starting in recovery mode, but it all started when i just upgraded my google stuff with google play, and then phone was restarting and started in recovery mode, but why , i dont know, i backuped files and i dident lost nothing but that starting in recovery mode was strange for me to.
K3v1n L said:
yes exactly, i had a stock rom , and now i have a stock rom again, and its working, i used kDZ and flashed new stock rom , and suddenly my phone starts to normaly again. But when i flashed custom rom with Clockworkmod, then it was starting in recovery mode, but it all started when i just upgraded my google stuff with google play, and then phone was restarting and started in recovery mode, but why , i dont know, i backuped files and i dident lost nothing but that starting in recovery mode was strange for me to.
Click to expand...
Click to collapse
Well If you want to flash a custom rom again, then flash another custom rom aside from the one that caused such strange thing. Follow Paget96 flashing steps, see if the problem persists, and make sure it's for L7 p700. If you haven't tried cyanhacker v2.0 then try it.
Sent from my LG-E610 using XDA Free mobile app