Database Users

[Q] USB device not recognized

I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh

Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium

Check your cable (You must use factory one)
USB port : use the main
can you post SS

Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.

usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate

its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]

thanks for all you that respond to mt post :good:

thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro

my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~

flash stock rom using odin

Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.

Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:

walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode

lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah

walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery

marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.

walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there

install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app

Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash

Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:

[Q] GS4 i9505 usb-pc issue after upgrade to JB 4.3

Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.

So... can sombody help me or this issue is too much advanced for this forum?

Again please help me.

Dude-K said:
Again please help me.
Click to expand...
Click to collapse
Can you please try to install this driver to your Pc http://uploaded.net/file/xdloq4jw , connect the cables on both side's Pc/Phone , on the screen to your phone there should be a notification(Connected as a media Device,Swipe it down and click that option, There should be MTP and Camera) Try to tick the camera first and let the driver install it and then tick MTP and let it install the driver for that as well , and Make sure to activate USB debugging. let me know. Have anice day.

I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please

Dude-K said:
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Click to expand...
Click to collapse
Hi there mate , Try plugging it in to another usb port that comes off a motherboard. Don't use the front ports or usb hub. or either download kies 3 from here http://downloadcenter.samsung.com/content/SW/201312/20131204181418883/Kies3Setup.exeto see if its gonna work or not.have a nice day.

Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
4.3 pc Drivers are different from 4.2.2. Install kies 3.
Enviado desde mi GT-P7510 usando Tapatalk 2

Dude-K said:
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
I see the problems are in Windows 7. The USB Conector seems ok. Untick "usb debugging" in ur phone and take a look this page. If dont appears nothing in the device manager, tell me it and i will give ya other solution
EDIT: Other option is:
- Uninstall completely Kies and Kies 3
- Reboot ur pc
- Download the latest version of Kies 3 (drivers are included, only tc what u select in the installation -> dont untick them)
- Conect ur phone to the pc with the USB conector and wait coz the drivers have to be installed. Till Windows dont finish of install them u dont need touch nothing. Good luck

I'm suprised that three peoples trying to help me, thats charming, thank you.
But...
Repulsa I've done what u wrote, I tried plugging s4 to another usb port, one port usb 2.0 and another usb 3.0, always was the same situation, the charging start coming but nothing more, there is no notification on phone screeon or on the pc. Also I tried do this in second pc, in 3 usb ports, but always was the same. After that I tried that what Repulsa and jaswinsky says, i re-install kies. First I uninstall in both pc kies, and i install the kies 3, I reboot my pc and I reboot my s4. Nothing new happens, only charging. Here i want to turn your attention that, I checked in both pc's my younger brothers Galaxy s2, and it havent any problems with connecting! If I plugging Galaxy s2 in this usb ports in both pc, windows 7 havent any problem to recognize phone! Kies and "My Computer" shows the device memory and its working. When I after that disconect s2 and plug in my s4 the same situation happens. Only charging icon, and nothing appears about connection.
After that i tried that what Joku1981 wrote, I untisck "usb debugging" in developer options and i checked the device manager, but there doesnt appears anything. There is not "other device" warning or anything like that. Charging icon appears but pc dont recognizing s4. I would also like to point out that, yesterday I've done with younger brother the format on one of this pc's with hope that will helps but, we format pc, reinstall windows7, reinstall all drivers, and the situation is still the same.
Please help me!
PS. I'm starting think about that the official OTA update do 4.4 will solve the issue..

[Q] odin cannot find my phone

I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks

Reinstall the USB drivers on your PC and then try.

aniket.lamba said:
Reinstall the USB drivers on your PC and then try.
Click to expand...
Click to collapse
i already did that but doesnt help:crying:

I am facing that problem too.
Both mass storage and download mode is not been recognized. But it works wither other phones.

use usb jig

oden cannot read ur galaxy y
Gexg said:
I made a mistake while changing my rom.Instead of using recovery mode i use download mode so its all messed up.This samsung galaxy logo hanging but nothing happens.Its bricked totally.And when i connect my device GT S 5360 with usb and open odin it does not recognise nothing happens not even that yellow colour.I've done many times changing my rom rom from this to that but this is the first time i face this type of probs which i cant solve.Any type of suggestion will be most appreciated.
Thanks
Click to expand...
Click to collapse
sir/maam have you tried installing again the usb driver.. then turn your phone to download mode.. try this in many trials.. godbless

Minions_Army said:
use usb jig
Click to expand...
Click to collapse
How to make it? And wont it hardbrick?

Jig is for unbrick,so it cant brick your device,look in general section for it or on facebook,ive and some others posted info about it.
GREETZ FROM TEAM-OPTIMA!!!

I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:

Gexg said:
I finally solved my problem.Its easy yet very tactical.Its not about reinstalling the usb driver on ur pc or it doesnt have anything to do with ur odin version.Just get another GT S 5360 from ur friend and connect that mobile with ur pc.And now try yours u will see the magic.
HURRAY:silly::good:
Click to expand...
Click to collapse
or try to off your phone before connecting to pc then go to odin mode while connecting to pc.

Uninstall the USB drivers, and reinstall the newest version.

[Q] MTP USB Conection problem Help !!

hi guys recently i have buyed an lte note 3 SM n9005 , running in KK
but i have found a huge issue that i can't conect my phone on MTP mode
and when conect the cable to my phone nothing happens exept a charging battery
& there is no notification about plugging the device to pc but the adb conection work
all i'm asking for is any way or guide toturial to fix MTP so i can transfer files to my phone from my PC
BTW i'm terrebly sorry for my Bad English :crying:

sulja rock said:
hi guys recently i have buyed an lte note 3 SM n9005 , running in KK
but i have found a huge issue that i can't conect my phone on MTP mode
and when conect the cable to my phone nothing happens exept a charging battery
& there is no notification about plugging the device to pc but the adb conection work
all i'm asking for is any way or guide toturial to fix MTP so i can transfer files to my phone from my PC
BTW i'm terrebly sorry for my Bad English :crying:
Click to expand...
Click to collapse
Open the Dialer, enter *#0808# and see what is your current settings?

thanks man it worked !!
u get my respect and i really do appreciate your help !

same same
having the same issues , mine says ap and mtp+adb.
think i may have f:ed something up with my usb 3.0 settings but not quite sure because its the same with usb 2.0...
if anyone has any ideas pls let me know. help would be much appreciated

same issue
my note is charging but being recognized. i had swapped cables, tried a diffrent computer, downloaded kies for drivers and manualy downloaded drivers andnothing. kies does not recognize it helpppppp i need odin to recognize as well!!!

sulja rock said:
thanks man it worked !!
u get my respect and i really do appreciate your help !
Click to expand...
Click to collapse
Please kindly advice what was the cause and what you have done to fix it.
Sent from my Nexus 7 using Tapatalk

Explaining
vndnguyen said:
Please kindly advice what was the cause and what you have done to fix it.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Well As you know the Devise that i have baught is new !!
and the cause was that the phone was seting on PTP MODe
and i've just follewed Mr " vndnguyen " advice which typing in the dialer the following code :
*#0808#
and i've just set it from PTP Mode to MTP+ADB option !! :laugh:
now my phone is regonized by My PC :highfive:
that's it!! it worked for and i wish the same 4 you too :victory: good luck Pal :good:

vndnguyen said:
Open the Dialer, enter *#0808# and see what is your current settings?
Click to expand...
Click to collapse
Can you maybe know what is means CP and AP when i enter in USB Settings menu when enter *#0808# i have for now set AP and usb settings to MTP+ADB

BLiNKT said:
Can you maybe know what is means CP and AP when i enter in USB Settings menu when enter *#0808# i have for now set AP and usb settings to MTP+ADB
Click to expand...
Click to collapse
That setting is correct, leave as it is.
CP = Cellular Processor
AP = Application Processor

URGENT NEEDING HELP ! S4 GT-I9505 Bricked and not conneting

Hi there everyone !
I have a Galaxy S4 GT-i9505 and it stopped connecting MTP via USB nso I tried out a "Wipe Cache" in Recovery
and the phone restarted it shows a note "System UI Stopped" and the phone keep in a black screen !!!
Please, somebody help me this phone is not totaly mine, it's from the company I work in :/
I can't even try a Stock Rom because the phone isn't being reconised by Windows
(yes I have all drivers installed and updated)
Thanks in advance !
Someone help me Please! I'm desperated !
I'm new around here so I'm sorry if I posted something that someone already did .

Have you tried using different USB cables and USB ports?

Yes!
audit13 said:
Have you tried using different USB cables and USB ports?
Click to expand...
Click to collapse
Yes I did, but nothing happens for while
once I saw something like that but with my old one a Lenovo K900, but the lenovo was still recognised by Windows so I had how to flash the room back :|

So there is no device that appears in device manager? Have you installed Kies or SmartSwitch?

Yes!
audit13 said:
So there is no device that appears in device manager? Have you installed Kies or SmartSwitch?
Click to expand...
Click to collapse
Yes I did, but only Kies, the second one I didn't know, gonna try it out now !

Done!
felipemichelr said:
Yes I did, but only Kies, the second one I didn't know, gonna try it out now !
Click to expand...
Click to collapse
Done that too and still with the same problema ... no Device on DeviceManager or even a sound noticing that I've connect the phone on both devices (Computer and Smartphone)
sad...

Was the phone detected before?

In what state (On, Off, Recovery, Download Mode) was the phone when you tried to connect it?

yes It used to be detected before :|

GDReaper said:
In what state (On, Off, Recovery, Download Mode) was the phone when you tried to connect it?
Click to expand...
Click to collapse
All of that, when I connect with the phone on/off it just charges ... When it's on Download mode or recovery nothing happens