Related
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
el o el
The s4 is nothing like previous samsung devices...at least on att, the bootloader is locked, safestrap is your only option.
Also keep in mind, att stated about a year ago they will no longer be supporting phones with unlocked bootloaders...so the problem you are experiencing now can be expected on every new att branded phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
There is NO WAY back from mk2. You can flash custom roms ONLY with Safestrap. No CWM no TWRP. Read this guide, it has everything you need to know for the S4. There is nearly 30 custom roms tested & affirmed working. Good luck & happy reading.
http://forum.xda-developers.com/showthread.php?t=2616221
SGS4 AT&T i337 on Stock MK2...jeboo kernel/recovery needed to install SHOstock v3.0 ?
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
djmisi99 said:
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
Click to expand...
Click to collapse
You are making it too hard. You need to be on 3.71 Safestrap to flash Sho's 3.0. You must use default (stock) kernel. You can not flash any other kernels period. And no other recoveries. And no 4.4 or aosp roms. I am not on SafeStrap as I have a MDL phone. So, you need to go the SafeStrap thread and read up on flashing a rom on SafeStrap. There are a couple threads on the subject. Read all you can first and make any backup your phone/recovery allows before flashing. Also, do a clean wipe before installing rom. That may be different then a clean wipe on MDL/Custom Recovery, not sure--:good:
[email protected] said:
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
Click to expand...
Click to collapse
Problem is it came from AT&T Store with MDL ...but the MK2 update came through OTA...and that must of lock the bootloader....dayummmmmmm...
AM I right?
Yes
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Phone came from the Store with MDL, ( I see it on the Original box: SoftWare Ver: UCUAMDL....
The guy I bought it from rooted it, and loki-ed it... how did that OTA come through, I wonder? Once rooted and LOKI-ed...the OTAs shouldn't come through, right?
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
djmisi99 said:
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
Click to expand...
Click to collapse
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Red_81 said:
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
******************************************
But if he had it LOKI-ed, that means he was just fine on MDL, no need for SafeSTrap, unlocked BL prolly ... he was free to install CM, GPE, AOSP, PACman and all these ROMs....so why flash it back to stock MK2? I mean, cutting his losses....that's funny...I mean, unless the MK2 OTA from AT&T came forced.... WHo knows...
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joeybear23 said:
el o el
Click to expand...
Click to collapse
LOL my butt, buddy...we still have SafeStrap ....ab. 30+ ROMz for it...so not exactly eL Oh eL....but oh well....such is life, ya know?
Red_81 said:
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know EXACTLY what you mean, bud...just gimme the file so I can flash it -type ... who cares what's that gonna actually do to my phone...Oh well, there are people...and there's people.... U never know who you get to deal with....
Just ask for a little help, ...why is that so hard, right?
I've been reading up on all I could, and now that I "kinda" get a better understanding of how things lay with the i337 MK2...I can make a decision to flash, and stay stock...
Problem is, I have been flashing since 2009, so I can't imagine owning a droid, AND NOT FLASH IT!!! IT KINDA DEFEATS THE PURPOSE OF OWNING AN ANDROID, right? hehehe
I know that feeling. At least Safestrap is a decent option. I rushed out to grab my MDL 32gb one before they updated their stock.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
KK 4.4 NB1 baseband
John The Rhino said:
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Click to expand...
Click to collapse
***************************************
Yes, prolly could upgrade to 4.4 , but would be needing to flash the NB1 modem, baseband first right?
ANd ppl are saying there is not much SafeStrap versions for KK 4.4(.2) yet, or am I wrong?
DO you know any ROMz like that?
Would it be possible to come back to JB 4.3, once on KK, that you know of?
Lemme know, bud...THX
ANy links.....?
I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
mayurd said:
I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
Click to expand...
Click to collapse
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
jmjoyas said:
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
Click to expand...
Click to collapse
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
mayurd said:
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
Click to expand...
Click to collapse
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
jmjoyas said:
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
Click to expand...
Click to collapse
Sorry for the repeated questions.
I tried to update through Safestrap with BlackBox. But I got stuck on the boot screen where it shows Samsung Logo. I might have done something wrong. I just clicked next on BlackBox 3.0. Could anyone please help me !
Edit:
When I tried to reboot into recovery mood (Vol Up + Home + Power) it says:
" Secure Fail Kernel
(Warning Sign) System Software not authorised by ATT has been found on your phone"
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I flashed the NB1 using ODIN but it still stays on Samsung Logo with custom logo. I am not able to navigate any where else from that screen.
Edit:
I was able to go into system recovery. Please let me know if I can fix the error somehow.
Thanks a lot !
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
He probably was following the steps that were provided elsewhere here that had you go from nc1 to nb1 then back to the M (I can't remember which M) one.
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
mayurd said:
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
Click to expand...
Click to collapse
I have sent you a PM. Probably I can assist better on hangout.
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?
Note: Relevant device info will be provided below.
Dear techwizards,
I've been trying to root my phone for a while, I've done it before: both my S II and S III were international variants, and rooting those devices was very simple. But after getting an S IV from America and consensually downloading a samsung issued update -- I had yet to read up on the disadvantages of knox -- my rooting and android experience took a turn for the worse.
Long story short -- I know developers are a proud bunch who value their time -- I tried rooting my phone yesterday after almost smashing my phone on a coffee table. They say it's a well known side effect of Touchwiz, but I'll leave that to you.
I used a towelroot.com root -- a wonderful tool, if I may say so. After that, I visited the CM website and picked out the compatible CM11. I never got to flashing it though, as my problems arose while installing a recovery.
I had downloaded an app, a something recovery or another. They had an option to flash recoveries on there--it would download your recovery for you and do all the work, which seemed plausible as most video tutorials demonstrated. To my astonishment, doing so bricked my phone.
I tracked back, looked for the samsung stock rom, downloaded all 2.2 gb's of it and flashed it. It worked. My phone was functional but I suspect something within it stinks. My device, apparently for security reasons, wont let my wifi or 4g to establish a connection. It's making it impossible for me to fix this problem as I can't root my device or flash a custom rom.
About Device:
Pre problem I was running a:
SGH-I337UCUFNC1 baseband. Build Number ending with: NC1.
Android version: 4.2.2
Post problem:
Baseband: I337UCUFNC1
Build Number: JSS15J.I337UCUEMK2
Android version 4.3.
If I could find my original stock 4.2.2 NC1 version and get simple instructions on how to re-install it back to stock version, I'd be very grateful.
If you know how I could fix the internet issue on the MK2 one, and provide some simple instructions of how to root it, I'd be grateful too.
If you think neither would work, and have something else in mind, Im open to your suggestions.
Much Regards,
Y
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I never got to installing or attempting to install CM.
Things took a turn for the unexpected after I tried installing CMW recovery.
Please reread my post
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
androidshmandroid said:
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
Click to expand...
Click to collapse
Did you look for the thread I pointed you to? In the general forum index, all things at&t... You're going to want to start there. That'll link you to this
http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Since your bootloader is already locked, you might as well Odin to stock. Odin to NB1 then use stock recovery to flash the NC1 update from a zip file on a microSD.
Part of the problem is that the NC1 is not 4.2.2 like you listed, but 4.4.2. That's the update you applied that started the sordid tale. When you were on 4.2.2, with bootloader MD<something>, you could have flashed CM or whatever, because you would be able to have TWRP or CWM recovery. When Samsung pushed out a 4.3 update (MK2 I believe) all the unlocked bootloader fun was over, probably permanently for this phone.
When you flashed MK2 firmware (4.3) onto the phone, parts of it don't work with the NC1 baseband, causing the problems you've seen. If you Odin NB1, then do the quick zip update from stock recovery to get all the way to NC1, you'll be back to stock and everything should work.
Once that's done, you can go through this process:
1. Root with Towelroot.
2. Install SuperSU to manage root access. (You might have to reboot, it's a 50%/50% shot... sometimes it hangs trying to disable Knox... no worries just reboot)
3. Install SafeStrap... it will create the safestrap recovery. You might need to install SELinux Mode Changer app (from play store) and set to permissive, to get Safestrap installed.
4. Boot to the SafeStrap recovery. Install any touchwiz rom. Only touchwiz compatible roms will work. I liked GoldenEye.
When installing touchwiz ROMs, typically one flashes the ROM, then SuperSU, then the NC1 modules, then the ATT BuildProp/APN file. Sounds complex but goes quickly. Some roms have some of these things built in.
Good luck! I eventually decided I didn't like the ATT Samsung restrictions of the locked boot loader, and bought a T-Mobile M919 variant of the S4. Unlocked boot loader. Woo hoo. And works fine on ATT.
Marc
hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2
sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.
MF3 would be the last three digits of your system software version
HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.
sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.
All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.