Related
For those worried about the phone app using too much memory in the background:
WM2003 and WM5 compatible.
This program is used to toggle the phone.
Useful if assigned to a hardware key or a shortcut.
If the phone is open, it will be closed. If it is closed, it will be opened.
Please note, for VGA WM5 users use my VJBigPhone app instead.
This application supports international language versions. By default it will look for the "Phone" window.
If your phone is called something different, launch the application with command line parameters matching the name of the Phone.
eg In German
\program files\vijay555\vjphonetoggle\vjphonetoggle.exe Telefon
After installation you will find a shortcuts in StartMenu > Programs > Vijay555 > VJPhoneToggle.
Check it out on my website!
EDIT: guys I think I made the cab wrong. try the exe for tonight
www.vijay555.com/vj/releases/vjphonetoggle/vjphonetoggle.exe
V
Any1 got a screenshot how this looks like on a Qtek 9100
q-biq, it literally just closes the phone app. Or launches it. Nothing to see!
V
I didn't really understood the goal for this tool.
Phone dialer opens easly pressing the TALK button, and closes also easly by tapping on "X" or pressing END button.
For sure this tool is supposed to do something I didn't catch.
However VJ, I'd like to propose you a challenge, for another "similar" toggling tool.
The porpose is: I have a SIM Twincard to use with the mobile phone fixed in my car.
Whenever I power on the car, it is supposed to switch off the mobile phone to avoid SIMs interference. This is simple for a regular phone, but not so practical for a Windows PDA Phone.
You have to:
- switch device on
- tap on 'Radio signal icon'
- tap on 'Turn on flight mode'
And when leaving the car, repeat all again to activate phone.
My idea was a small program to assing to an hard button, which would toggle the 'filght mode' or just GSM radio.
So you have to press just on buuton like switchi.ng the on/off
What do you think?
Conchas: this application was made for mzaslam, under this thread:
http://forum.xda-developers.com/viewtopic.php?t=34718&start=0&postdays=0&postorder=asc&highlight=
He is concerned that the phone app uses quite a lot of memory in the background, even when not in use. Pressing ok just puts it in the background. So VJPhoneToggle fully unloads the phone app when you're finished with it, and loads it again when required.
Re the Flight mode thing: I will have to make this app, but I use a dual sim myself and also use the flightmode off > flightmode on trick to switch sims.
I use PhoneAlarm on my setup. This can be set up to launch from a shortcut to switch profiles, so for my setup I use a today screen shortcut on claunch to switch to flight mode, work, home etc. So for my setup I have three thumb friendly icons to activate profiles on PA. So I can switch easily from Today. Is that ok?
V
Yes it works.
... but I always hae been looking for a small toggling application, assignable to an hard button.
Conchas: I don't understand. What do you want your hardware button to do? Load/unload an app?
V
I want my hW button to toggle 'fligth mode' on/off.
Or more exactly the phone radio on/off as the wireless manager does. More precise, as nowadays allmost every PDA phone device supports BT and WiFi.
i.e. I would like to enable/disable the SIM ability to register into the GSM/3G network, in order to avoid interference with a second SIM (twin card), whenver required (e.g. using into a car).
It is not just a matter of the last phone switched on, because when travelling by car, as you move to other network cells, the first phone switched on most likely will take the handover.
Guys, this has been updated to not require an international parameter on the command line.
It should internally support all international versions. I hope!
V
Conchas, is this what you are looking for? Just copy the exe to your device and bind it to a hardware button.
Great, Koksie
It works!
I'm using it manually.
Can you tell, where to put the '.exe', so it gets visible to assign on the "Settings > Buttons"?
I 've added it to '\Windows', but didn't get it visible.
Thanks
Fernando
You don't have to put it in windows. Just make shortcuts to it in the start menu. Any startmenu shortcuts get picked up by the Buttons cpl.
V
Hi,
Forget it.
I miss something. In fact it was possible to assign to the buttons, if copied the '.exe' to '\Windows.'
Great!
Thanks Koksie
Fernando
Hi guys,
I'm wondering if there's a tool to temporarily disable the automatic power-off setting, while some program is running?
like this: c:\disablepoweroff.exe noteM.exe will
1) get the automatic power off settings
2) disable automatic power off
3) run the program noteM.exe
4) when noteM is closed, restore the automatic poweroff setting.
at this point I have to manually disable automatic poweroff function, tart recording, and restore the setting back after recording is finished.
Vijay555, I guess this has to be in your usefull apps list
The same can be done to the automatic screen off - will be useful to use with ebook reader programs.
Thanks,
Vick.
Qtek9100 WWE 2.17
I wrote a program to do this, VJElectrify, but it eats batteries so I never released it... I might do one day, with some other stuff I want to add in.
V
guys I'm alone in this need? Have somebody faced the same need and found a solution?
Ok, here is the (Cell Tower ID) location based Sleep Management software (earlier called phone switcher).
Saves your battery and works automatically without any manual action once configured
Application is not memory resident so it does not keep running in the background. Does not write anything to registry etc so can be uninstalled cleanly.
Application can run in one of the following modes
• Flight Mode: System automatically switches to flight mode when you are at predefined location (Say Home) based on the time you setup. So when you are at home, say from 10:00 PM to morning 6:00 AM your phone is really sleeping so no one can call your mobile. But if you are not home, then phone remains ON even at night.
• Run Command*: You can configure separate command line applications while ‘entering’ and ‘exiting’ your Sleep Location. So if you want to perform some other actions such as enabling the sounds/vibrations/forwarding etc you need to configure this feature
Run Command* Notes:
• Run command has two settings
o Entering sleep locationo Exiting sleep location.• Either browse for the command line application or copy paste the short cuts on the file and any command line parameters
• Some programs require you to ‘Wake Up’ the device to run, so if needed use that option
• ‘Wait for completion’ is only for advanced configurations. Most of the time it will hang the application. So use if you absolutely need it.
• You can test your run commands from the ‘Test’ menu.
Update history
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
Update 1.0.1
• Multiple locations on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now.
• Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
• If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
It is working on Hermes(WM6), and I have tested it on WM5 emulators. Will NOT work on WM2003.
Setup Instructions:
• You need to be at ‘Sleep Location’ to setup the application.
• In the ‘Locations’ tab, the current location box shows some numbers corresponding to your location.
• Click the button ‘Set as Sleep location’ to add current location as your sleep location. You can add multiple locations as sleep locations.
• On the ‘Schedules’ tab configure the ‘From’ and ‘To’ time fields. (You need to specify time in military time format)
• From the tab ‘Action’ choose if you want to use flight mode or Run Command (you need to set up your enter and exit actions)
• Finally click ‘Enabled’ and click the ‘Save’ menu
That’s all now you are set for ‘Sleep’. You can safely exit rk-Sleep.
The status tab would show you the last action attempt log
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
If you like the application please show your support by replies and or donation on paypal
Download from here
Update 1.0.1
Multiple location on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now. On the sleep location box bring the context menu up, and choose 'Append to location' now add the new location to the list. You can add any number of sleep locations!
Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
Hello,
With this program there would be still another interesting option which one to insert could.
It would thus not have to be possible the flight mode to activate automatically with enters a stored potition dependent on the time.
If someone works in a hospital, he needs to store only the position and every time it is in the hospital the flight mode switched on.
That one could not do also at others locates to use at those handys permitted or desired is I thinks there also of cemeteries.
MfG
S64
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
(I use mortscript to change call profiles, by copying sound files to overwrite the soundfiles I assigned as ringtones for various contacts. So if I set a "work" profile, the ringtones for different people are overwritten with a soundfile that contains silence, while others are made more discrete. It would be great to be able to automate this!)
Jörg
Instead of enabling flight mode, why not just disabling sound or enabling vibrate only mode?
Thanks
V J said:
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
Jörg
Click to expand...
Click to collapse
Jörg,
I do not know about mortscripts, but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
tytnguy said:
... but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
Click to expand...
Click to collapse
Yes, it should be able to do that. Also, maybe it is better to write it this way, and have your "flight mode application" written as a seperate program to be triggered by your tower-based software. In this way, others can contribute to write any other programs (as plugins) to yours. Anyway, AFAIK, Mortscript can do most of the job and or VJ (not the one above) has some nice collection that you can paired with yours.
Next you can write some scheduling software that will run an application whenever there is a 'Busy' (e.g. meeting) in your schedule (e.g. activate vibrate only mode). Then, with your tower-based software and your scheduling software, you can have a nested tower-schedule, while others can have a bluetooth-pairing based (e.g. execute software when near a paired bt device - change mode when inside your car), then you can stack all these together that will schedule your stuff based on tower-schedule-bt pairing.. WOW... too much software engineering makes you crazy.
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
drivex said:
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
Click to expand...
Click to collapse
Yes I know that is where this software will lead to(Hopefully)
But to support multiple locations the progrma gets too complex. But I know that will be a perfect applicaton!
@VJ: I think using mortscript with the tool would defeat the purpose of the tool, because with mortscript you don't need the tool (The current tower, or BTS as I should refer to it to, is available in registry I think)
@tytnguy: kudos to you, great streak with so many useful programs.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
• You can configure separate command line application while ‘entering’ and ‘exiting’ your Sleep Location
More info on the main thread.
Hi,
Great Application that seems to work perfectly. I can see myself using it to help save on battery life.. and also when I enter work where I cant have the phone on.
Don't suppose you'd share how you get the tower information? I tried a method posted on the forums but it doesn't work for me and only works when the data/voice is not connected.
I tried to implement this into an application I use as a backup to give a rough location if GPS location isnt available but never managed to read a sensible string for the towers ID.
(If you'd rather not say I understand fully)
Thanks,
sam
Great!, make a profile changer based on location also, that will be awesome
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
ArcticCat said:
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
Click to expand...
Click to collapse
Thanks for the reply,
But right now the application just supports one location, So you are not able to do multiple locations. If you use the slot of managing only alarms its fine. But if you want to do alarm and also in some other location some other action you can not.
But i have that featrue in my list though
To do it, right now you have to set to 'Run Mode' and in the run mode specify any media file, On entering your location the media will be played.
Hi tytnguy,
found a "mini minor" bug in latest version 1.0.3...
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Next step in version profiles would be great
Best regards,
Olioaglio
Olioaglio said:
Hi tytnguy,
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Olioaglio
Click to expand...
Click to collapse
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
Olioaglio said:
Next step in version profiles would be great
Olioaglio
Click to expand...
Click to collapse
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
tytnguy said:
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
Click to expand...
Click to collapse
I would like location based profiles with different schedule times,
so that you could e.g. install a "Home location" with flightmode from
11pm to 8am (like it is now) and a second profile maybe for work
with flightmode from 12am to 1pm. Or maybe a profile with 24/7 flightmode
on a certain location. Lets say you work in a hospital and while you
enter the lcation phone would turn to flightmode. If you leave phone would
switch on again.
The wifi+bluetooth+beam etc options would be also a geat thing to include
as an option with checkboxes, so one could save even more battery at night
and in sleep location would not be any electro smog.
But for now I can live very good with the program as the main function
works like it should now. One little thing: Found out, that if you reset the
phone within schedule time and phone was turned on (manually) rk-sleep
wont turn it off again. But this may be wanted as not to nag you if you
decide to manually turn on.
Olioaglio
What is the Net Compact framework that it needs! I'm running WM5, and it doesn't work on my device and I supose it has got something to do with what I mencioned earlier. Thanks.
=======================================================================================
DredSensor v1.3a:
=======================================================================================
Now DredSensor should be compatible with other device than HTC Touch Diamond.
Historically, if you have tried to play a game needing left and right key on an HTC Touch Diamond, you noticed that they are 2mm wide and if you click next to it, you get back to home page or to dialing menu etc...
So I've written a prog allowing you to lock these 4 keys actions and replace it by classical key event (VK_LEFT, VK_RIGHT, ...).
In that way you can play tetris, and use "Pick-Up" and "Hang-Up" keys for going left and right.
I extended it to let you configure each app independantly, and choose between four (five) mode:
"HardKeySimul": replace the 4 keyz by classical key event
"Launcher": allow you to quicklaunch 4 app (that you define in the config wnd) when you double tap (not click, just tap) on one of those 4 keyz
"Scroll": allow you to scroll the current window by tapping those 4 keyz panel
"KeySimul": allow you to send left/right/up/down events by tapping those 4 keyz panel
"--- Disabled ---": Disable specific HTC Touch Diamond Sensor functionalities.
Now, i've added an alternative Key Mapping, that let you map an action (or another key) on normal click and long click event on any other key that the up-described four.
So if you don't have an HTC Touch Diamond, the only mode you can choose is "--- Disabled ---" but you can define "other key mapping".
Link ->: DredSensor-v1.3a
To use it, you need:
1) A Windows Mobile SmartPhone
2) Install the .cab
3) Reboot your SmartPhone
4) Run a game (or app or ...)
5) Get your stylus out and back-in, in less than 1 second
6) Click "Yes"
----- A config window opens:
7) Choose the Type you want.
8) Reassign the actions to the events, if needed.
9) Assign "other key mapping", if needed.
10) Click "Ok"
Other Key Mapping:
To add a key mapping, a popup opens and ask you to press a key.
If you want to assign an action to normal clic, just clic on the choosen key.
If you want to assign an action to long clic, clic more thant 1 sec on the choosen key.
Then you have to choose the action, and it's done.
If you only assign an action to a long clic on a key, a short clic on this key should work transparently.
Have fun.
=======================================================================================
If you like this program, feel free to donate:
=======================================================================================
==========================================================================================
Version history:
==========================================================================================
New features in v1.3a:
=====================
Added an alternative key mapping that Should be compatible with any Windows Mobile device.
Added the "KeepAlive" option. Check this if you want DredSensor to prevent the smartphone to sleep when this application is loaded.
Added possibility to Enable/Disable DredSensor:
Exemple of C++ code to do this:
#define WM_DREDSENSOR_START WM_USER+22
#define WM_DREDSENSOR_STOP WM_USER+23
Disable:
HWND m_hDredSensorWnd=FindWindow(_T("DredSensorWnd"),NULL);
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_STOP,0,0);
Enable:
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_START,0,0);
New features in v1.2g:
=====================
Fixes a few bugs
Fix the bug in config window when loading prog list
Added a debug mode:
================
For activating it, just launch DredSensorDebug.exe (in /Program Files/DredSensor).
First it will tell you if DredSensor is running or not.
If it's running, it will activate/deactivate the debug mode so you will find a log in /Program Files/DredSensor/Log
If you have trouble with DredSensor:
Restart your HTC
Launch DredSensorDebug (to activate log)
Wait for DredSensor to stop working
Launch DredSensorDebug to know if it's still runing or not.
PM me the log, the config.ini and a description of the problem.
New features in v1.2b:
=====================
Tried to fix the conflicts with TouchLockPro and similar, hope it works (thanks for those who can check this out)
New features in v1.2:
=====================
Fix "not working bug" with new ROMs
Allow you to choose wether you block the scrolling wheel or not
Allow you to disable the vibrator effect.
Allow you to delete configs.
Tips:
=====
If you upgrade to this version, you can keep your config file.
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
=======================================================================================
DredSensor v1.1d:
=======================================================================================
Link ->: DredSensor-v1.1d
New features in v1.1d:
=====================
Let you choose which Key/Action you affect to each key.
Launcher Mode let you affect an Action for:
Double Tap event
Click event
Long click event
An icon for config tool is created in Program list.
Cache Program List for quick loading in Config window.
Fixes a few bug from v1.1, v1.1b and v1.1c
Tips:
=====
If you upgrade to this version, your config file will be cleared (sorry ).
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
Wonderfull!!
the app is working good for me now! I just love the scrolling with only a touch on the d-pad
Thank you!!
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
After installing and lunch program .... i cannot see any of EVENTS on Events tab. Windows "wait gif" is rolling all the time and nothing happen :/ (i talk about mapping under HardKeySimul
Kraize said:
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
Click to expand...
Click to collapse
That's what i wanted to do but i didn't found a way to update the post title...
Is there one?
thanx for the update I'll try it and report
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
antlane said:
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
Click to expand...
Click to collapse
Hmm.. For the scrolling wheel, i use a tricky solution that works on my HTC touch diamond. May be it doesn't work on your model or on your rom version...
If someone have an idea on how to send a "ZoomIn" or "ZoomOut" event to a window (or how to develop an application that catch ZoomIn and ZoomOut events), that would help a lot...
As far as i studied the problem, it seems that ZoomIn and ZoomOut events are equal to Up and Down keys, but comming from a "rocker" .. so I can send those Up/Down key events, but no idea of how to tell that this comes from a "rocker" (and i don't even have an idea of what a "rocker" is...)
Help?
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
What an absolutely brilliant program!
Thank you very much Dredger97!
Greeting
Slide
ldrn said:
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
Click to expand...
Click to collapse
Well if you insist , i've added a donate link in the first post...
Big thanks to all for your positive and constructive comments
TF3D and DredSensor don't play nice together
This program is awesome! You can do so much with it! However, I am having one small issue with it. It appears that if I use it on Manilla [TF3D], that it works initially, but over time it seems to stop working and ends up freezing Manilla. The start icon still works, all the unmapped hardware keys still work and the task bar is still live. Only Manilla is frozen. If I don't map any keys on Manilla, it works fine for hours. But it only takes about 1 or 2 hours before there is a freeze on Manilla.
Any thoughts on how to correct this? I would love to use this program from my Home screen on Manilla.
Long click event → vibrate/nomal
Hi,all!
i want "Long click event" of Endkey to set vibrate/nomal.
how edit setting?
sorry for my english!
thanks.
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
intel286 said:
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
Click to expand...
Click to collapse
Well, disabled means "DredSensor is disabled" so it's normal that your hw key do what it's supposed to.
If you want to disable the hard key, you can:
- set Type: Launcher
- set "Click" action = "Misc:Nothing" on one of the keys.
So it will catch the hard key action, and do nothing when you click on it.
For me it doesn`t work :/ windows "Wait" gif is always apperaing when i want to add new Event. :/ And there is no Events on the list ...
tried that but same when i press home it goes to home
i have tried that on wmp.
is this program always turned on,now when i remove and than get back in stylus no menu pops up?!?
Great Job!
the app finally works on my pda! so glad you solved this bug!
But I still have a little problem...the app runs fine, when I start the buttons work with the function that I chose, but after the first time I use it it crashes and stops to work. Am I the only one with this problem?
Thanks,
Michele
Dredger, I asked in the last thread, but didn't get a response.
As far as mapping other buttons goes, could you post a quick example of what I would type in the config.ini to map the center D-pad button to act as the "left" button.
I realize the buttons commands are listed in the link you provided in your first post, but I'm having a little bit of trouble figuring this out.
Thanks.
Great app btw.
I'm gonna have to have another go at this... For some reason I just can't wrap my head around the setup of the program.
hi all.
I installed Advanced Config and tried to change the date display format. When I first tried to update the manila app, it seemed to succeed but the date now displays as 29-mmmm-2009
Now whenever I try to go back and change the setting on the "TouchFlo 3D" I get an error message and no changes are made.
Any advice?
Thanks in advance.
Before you launch Advanced Config tool, disable TF3D via "Today" settings.
Launch Advanced Config and navigate to the TF3D settings.
Change the format to whatever you want. See the following link for valid formats. http://pocketnow.com/tweaks-hacks/easy-way-to-change-date-format-on-touchflo-3d
Tap the "Change" button and then tap "ok". There will be error messages. Just ignore them.
Re-enable TF3D and see if it worked.
Worked kind of thanks!
ohyeahar said:
Before you launch Advanced Config tool, disable TF3D via "Today" settings.
Launch Advanced Config and navigate to the TF3D settings.
Change the format to whatever you want. See the following link for valid formats. http://pocketnow.com/tweaks-hacks/easy-way-to-change-date-format-on-touchflo-3d
Tap the "Change" button and then tap "ok". There will be error messages. Just ignore them.
Re-enable TF3D and see if it worked.
Click to expand...
Click to collapse
Thanks for the advice. I tried your suggestion and it worked kind of....
I set the date format back to the first 2 option under Advanced Config (dd.mm.yy or dd/mm/yy) that worked but none of the others do. :-(
Still better than the mangled message I had before.
Thanks again.