Related
Dear Friends,
As an one month owner of Htc Universal, i searched the internet a lot and found lots of information. Also this great forum is really helpfull for me to do the rom updates or hacks provided by the experienced members... But i am thinking to open a topic to share what i found with all description... So i want to upload all the cabs and hacks i found, in an ordinary way... Probably most of the hacks which i uploaded here may be given a time ago in these forum or somewhere else... So this topic is aimed to be a collection pool of all the hacks for newbies like me and i will try to update the topic frequently... Any help to me is really great and for any mistake of mine, please forgive me...
Regards and thanks...
HTC UNIVERSAL HACK COLLECTION POOL!
**** NONE OF THE HACKS, UPLOADED IN THIS TOPIC, BELONG TO ME...I HAVE COLLECTED ALL OF THEM FROM THE INTERNET... THANKS GO TO THEIR PROGRAMMERS AND FOUNDERS....
*** AFTER APPLYING HACKS, PLEASE POWER OFF THE PHONE AND WAIT FOR 5 SECONDS AND THEN SOFT RESET...
HARD RESET:
PLEASE DONT FORGET TO BACKUP YOUR IMPORTANT DATA.
PRESS BOTH SOFT KEYS ON THE KEYBOARD AND RESET HOLE WITH STYLUS AT THE SAME TIME TO DO A HARD RESET...
BOOT LOADER MODE(USB/SERIAL):
FIRST DEATTACH SIM AND SD/MMC MEMORY CARD.
DISCONNECT USB CABLE.
PRESS BACKLIGHT BUTTON + POWER BUTTON + RESET HOLE AT THE SAME TIME.
YOU WILL SEE " SERIAL " ON THE SCREEN.
NOW CONNECT USB CABLE TO ENTER " USB " MODE.
PHONE KEYS VIBRATION EFFECT:
With this hack, you can feel the vibrate effect while pressing phone keys...
PHONE KEYS SOUND EFFECT:
With this hack, you can go back to default settings after phone keys vibration effect hack...
SHOW CONTACTS FIRST NAME SURNAME ORDER:
With this hack, you can change the view style of contacts to first name surname. After installation, tap and hold any contact and slect the file as option from the menu...
CHANGE BACKLIGHT KEY COMMAND:
With this hack, you can change the command of back light button to any program other than backlight function...
CLEARTYPE ON FOR PORTRAIT AND LANDSCAPE MODES:
With this hack, you can activate clear type both for portrait and landscape modes...
ACTIVATE PHONE SKIN WITH 3D BUTTONS:
With this hack, you can activate phone skin with 3d buttons in the expense of some memory and speed..
BLUETOOTH VOICE DIAL COMMAND OFF:
With this hack, you can deactivate the launching of voice command program and get opportunity to transfer the playing music directly to bluetooth headset by pressing the voice call button on the bluetooth headset (must be supported by bluetooth headset)...
BLUETOOTH VOICE DIAL COMMAND ON:
With this hack, you can reactivate voice call function over bluetooth headset...
DISABLE SECURITY:
With this hack, you can disable security procedures just after a clean hard reset without extented rom installations...
PERFORMANCE TWEAK HIGH RESOURCES:
With this hack, you will change the all storage caches,audio prioty,soft keyboard sensivity,font cache,glyph cache,deactivate start menu and windows animations with high amount of memory allocations...
PERFORMANCE TWEAK LOW RESOURCES:
With this hack, you will change the all storage caches,audio prioty,soft keyboard sensivity,font cache,glyph cache,deactivate start menu and windows animations with low amount of memory allocations...
WIFI G MODE ON:
With this hack, you can activate the mode for connecting wifi networks only for g protocol but be advised that there is no significant speed improvement over b mode...
WIFI SCAN INTERVAL LOW:
With this hack, you can consume some battery power while wifi is on by lowering the scan interval of wifi networks...
POCKET IE TWEAKS:
With this hack, you can change the parameters of pocket ie.the changes are make fit,zoom to small,search page as google,max request and max connections,cleartype on for ie,pocket ie as msie6.0 ...
ENHANCED FILE DIALOG:
With this Hack, you can enhance the builtin file dialog applet to browse whole the phone easily in the dalog window.just copy all the files in the archive to windows dir and soft reset.After run the file dialog applet from control panel and check the option Exchange standart File Dialog.
SOFT KEY APPLET:
With this hack, you can change the soft key commands.Just copy the file in the archive to windows dir and soft reset.After run the applet from control panel...
DSP ENHANCER -BASS&TREBLE SETTINGS:
With this hack, you can set the level of bass and treble easily via applet in the control panel. Especially you can feel the basss and treble changes by headset... ( Removed! Reported to be not working with Htc Universal )
UNLOCK EXTENDED ROM:
With this hack, you can get extra 10 mb free space in the new mounted storage area called ExtendedROM...Simply after installing cab, just run the ExtROMUNLOCKER from start menu - programs and soft reset.After you can add or delete any file in this new storage space or organize it with the cabs which you want to automatically be installed after hard reset...
HIDE ROTATE ICON FROM TRAY BAR:
With this hack, you can hide rotate icon from tray bar...
SHOW ROTATE ICON ON TRAY BAR:
With this hack, you can show rotate icon on tray bar...
HIDE WIRELESS MANAGER ICON FROM TRAY BAR:
With this hack, you can hide wireless manager icon from tray bar...
SHOW WIRELESS MANAGER ICON ON TRAY BAR:
With this hack, you can show wireless manager icon on tray bar...
HIDE BATTERY ICON FROM TRAY BAR BATTERY:
With this hack, you can hide the battery icon from tray bar...
SHOW BATTERY ICON ON TRAY BAR:
With this hack, you can show the battery icon on the tray bar...
ACTIVATE TRUE VGA MODE:
With this hack, you can activate true vga mode (96 dpi instead of 192 dpi). Installation information included.
WM5 NEW MENU
With this hack, you can change one of the soft keys as a new menu like in windows mobile 2003...
DISABLE GPRS AUTO CONNECT
With this hack, you can disable gprs autoconnect and then connect manually whenever you want...
BLUETOOTH ICON ON TRAY BAR
With this hack, you can see and change the status of bluetooth from tray icon.
***UPDATE: 03.03.2006***
TUNE CLEAR TYPE LEVEL:
With this hack, you can tune the level of clear type from high to low or from low to high. Very usefull when using true vga mode. Install and run the program from start menu...
POCKETIE BLANK HOME PAGE
With this hack, pocketie will start with a blank home page...
DATE+TIME ON TITLE BAR
With this hack, date and time is available on the title bar...
Nice post ¡¡
Hey man....Good Efforts.keep it up..
tweaks
awesome work mate cheers
oh man!!! I tried the Vibrating Keypad function, was cool,,,, but I wanted to revert back and boom; it messed up completely,,, i cant even dial fast now; your soundkeypad file seems to be problematic...
any solutions?!!??!?!?
hmm ok... fixed it by goind through the registry and deleting the SOUND as string and creating new SOUND as dword... that worked... :roll: oh man, what a hassle.
on the other hand::: your tweaks seem to be very interesting :wink: good work, keep it up!
Dear matt_x,
After your experience i have rechecked the hacks for phone keys and there is no problem in my device... Let me advise you;first install this hacks and then a soft reset should be a good way...
Regards and thanks...
How do view/install?
Hi,
Very interested in the hacks, but how do you install them? I can't open them or view them, can anyone point me in the right direction.
Cheers
Yohanson
Re: How do view/install?
yohanson said:
Hi,
Very interested in the hacks, but how do you install them? I can't open them or view them, can anyone point me in the right direction.
Cheers
Yohanson
Click to expand...
Click to collapse
You should put them in the memory cord of your phone, then click them from there.
The .CAB files should be installed FROM THE PHONE.
goodluck
Hey great work with the hacks
Thanx for sharing
Used the Soft Key app & it works great. cheers.
Problem sorted
Or some reason when I was downloading the files they were changing to .php not .cab. So with a quick change of name all working fine.
Anyone know how to change internet explorer reg back to original settings?
cheers
Dear yohanson,
Most of the tweaks for pocket ie can be easily changable within pocket ie by options menu...
Regards and thanks...
protochip,
great works !!! thanks for the "compilation"
Manage to installed :
DSP ENCHANCER -BASS&TREBLE SETTINGS
* Works very well.
SHOW CONTACTS FIRST NAME SURNAME ORDER
* Works very well.
POCKET IE TWEAKS
* Can't find where to do the changes. Unable to find the new setting in IE menu.
cheers,
Simon
brilliant
Dear simontee,
After applying pocket ie hacks there will be no new menu.I meant that if you want to go back,you can change some of the tweaks within pocket ie.For example you can change the zoom setting to larger or make fit to desktop from the menu of pocket ie.But other tweaks are directly written to registry ( cleartype, pocket ie as msie6.0, ... )
Regards and thanks...
Nice work will give them a try on my BA...
protochip...
thks for replying.... great works !!! keep it up !!!
cheers,
Simon
HI.
HI. PROTOCHIP.
I KNOW YOU FROM SX1 FORUMS.
I THING YOU CHANGE YOUR OPERATING SYSTEM.
ANYMORE YOU WILL USE WINDOWS MOBILE.
ONCE UPON A TIME YOU PREFERED SYMBIAN.
WELCOME TO WINDOWS MOBILE.
GREAT WORKS.
Dear wildwind,
As you know, technology is improving very fast... As an ex-owner of Siemens Sx1 i am proud of it. Now it is time for windows mobile and time for Htc Universal... Who knows what will become popular next year, be sure i will be so close to it...
Regards and thanks...
Just wondering..
Is there an iLock (from Slide2Unlock) like application available that will use the standard keylock feature rather than the slide.exe..
I tried using vjdevicelock with the -pwfoff flag and it works great... but I can't assign that to the power button on my hermes..
What I'm after is a way to have the standard keylock come on automatically as soon as I press the power button to send the phone to sleep. I realise this has probably been done before but all the apps i've tried dont work exactly as ilock does.. (ie sitting in the background and activating on power button tap - this is perfect)
Im thinking that I can probably create my own slide.exe to trick ilock.exe into running it and have that call vj's util with the right shortcut.. but thats a hassle when i'm sure its already been done.. (if it hasnt and anyone wants it ill make one though as id love this feature)
Cheers,
Sam
All sounds wrong to me - you want to just use something like SK Tools or basically anything that lets you create notifications (or use code!).
Create a notification that loads whatever.exe on power on, so as soon as the system powers on (ie after you've powered it off previously), notification is received and whatever.exe is launched.
You don't need to spoof VJDeviceLock etc.
V
PS Maybe I read wrong. VJDeviceLock works on my Hermes. I use v0.3 and use the -install command line option to install the above notification. It automagically locks my hermes on power on.
Check out Device Lock.
I am at work so I can't really take a look at it, but I second the idea of keeping the issue simple. Just just SK Tools, and do a bit of searching in the \windows folder.
There should be a *.exe that activates the lock feature. Then you can map it to a button. That is how I have setup the Memory Manager to a key so that way I do not need to download a task manager per se, or what I do not is that I have the task mananer.exe that comes with Black Shadow... etc.
The point is that it should be able to be done. Just take a look.
I don't think there is a specific .exe to active keylock - some phones do have one, but I can't remember if HTCs do.
It's technically an API call, but there are other ways to activate it too.
V
Ok, here is the (Cell Tower ID) location based Sleep Management software (earlier called phone switcher).
Saves your battery and works automatically without any manual action once configured
Application is not memory resident so it does not keep running in the background. Does not write anything to registry etc so can be uninstalled cleanly.
Application can run in one of the following modes
• Flight Mode: System automatically switches to flight mode when you are at predefined location (Say Home) based on the time you setup. So when you are at home, say from 10:00 PM to morning 6:00 AM your phone is really sleeping so no one can call your mobile. But if you are not home, then phone remains ON even at night.
• Run Command*: You can configure separate command line applications while ‘entering’ and ‘exiting’ your Sleep Location. So if you want to perform some other actions such as enabling the sounds/vibrations/forwarding etc you need to configure this feature
Run Command* Notes:
• Run command has two settings
o Entering sleep locationo Exiting sleep location.• Either browse for the command line application or copy paste the short cuts on the file and any command line parameters
• Some programs require you to ‘Wake Up’ the device to run, so if needed use that option
• ‘Wait for completion’ is only for advanced configurations. Most of the time it will hang the application. So use if you absolutely need it.
• You can test your run commands from the ‘Test’ menu.
Update history
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
Update 1.0.1
• Multiple locations on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now.
• Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
• If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
It is working on Hermes(WM6), and I have tested it on WM5 emulators. Will NOT work on WM2003.
Setup Instructions:
• You need to be at ‘Sleep Location’ to setup the application.
• In the ‘Locations’ tab, the current location box shows some numbers corresponding to your location.
• Click the button ‘Set as Sleep location’ to add current location as your sleep location. You can add multiple locations as sleep locations.
• On the ‘Schedules’ tab configure the ‘From’ and ‘To’ time fields. (You need to specify time in military time format)
• From the tab ‘Action’ choose if you want to use flight mode or Run Command (you need to set up your enter and exit actions)
• Finally click ‘Enabled’ and click the ‘Save’ menu
That’s all now you are set for ‘Sleep’. You can safely exit rk-Sleep.
The status tab would show you the last action attempt log
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
If you like the application please show your support by replies and or donation on paypal
Download from here
Update 1.0.1
Multiple location on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now. On the sleep location box bring the context menu up, and choose 'Append to location' now add the new location to the list. You can add any number of sleep locations!
Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
Hello,
With this program there would be still another interesting option which one to insert could.
It would thus not have to be possible the flight mode to activate automatically with enters a stored potition dependent on the time.
If someone works in a hospital, he needs to store only the position and every time it is in the hospital the flight mode switched on.
That one could not do also at others locates to use at those handys permitted or desired is I thinks there also of cemeteries.
MfG
S64
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
(I use mortscript to change call profiles, by copying sound files to overwrite the soundfiles I assigned as ringtones for various contacts. So if I set a "work" profile, the ringtones for different people are overwritten with a soundfile that contains silence, while others are made more discrete. It would be great to be able to automate this!)
Jörg
Instead of enabling flight mode, why not just disabling sound or enabling vibrate only mode?
Thanks
V J said:
Great idea!
Is it perhaps possible to tirgger an application (or better: mortscript) upon entering a given location?
Jörg
Click to expand...
Click to collapse
Jörg,
I do not know about mortscripts, but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
tytnguy said:
... but if i make application to run some other exe(say with some command line, Will the mortscript be able to change sound settings, call forwarding etc?
Click to expand...
Click to collapse
Yes, it should be able to do that. Also, maybe it is better to write it this way, and have your "flight mode application" written as a seperate program to be triggered by your tower-based software. In this way, others can contribute to write any other programs (as plugins) to yours. Anyway, AFAIK, Mortscript can do most of the job and or VJ (not the one above) has some nice collection that you can paired with yours.
Next you can write some scheduling software that will run an application whenever there is a 'Busy' (e.g. meeting) in your schedule (e.g. activate vibrate only mode). Then, with your tower-based software and your scheduling software, you can have a nested tower-schedule, while others can have a bluetooth-pairing based (e.g. execute software when near a paired bt device - change mode when inside your car), then you can stack all these together that will schedule your stuff based on tower-schedule-bt pairing.. WOW... too much software engineering makes you crazy.
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
drivex said:
Very nice software, but pls if You can, make a addon to change profile based on id, that would be nice. Something like: when i go to work (cell id: XX) phone change profile to vibrate/silent, but when i go back to home phone (cell id:YY) will change profile to loud.
Thx
Click to expand...
Click to collapse
Yes I know that is where this software will lead to(Hopefully)
But to support multiple locations the progrma gets too complex. But I know that will be a perfect applicaton!
@VJ: I think using mortscript with the tool would defeat the purpose of the tool, because with mortscript you don't need the tool (The current tower, or BTS as I should refer to it to, is available in registry I think)
@tytnguy: kudos to you, great streak with so many useful programs.
Update 1.0.2
• Better user friendly UI added
• Now the application supports running an external application on command line.
• You can configure separate command line application while ‘entering’ and ‘exiting’ your Sleep Location
More info on the main thread.
Hi,
Great Application that seems to work perfectly. I can see myself using it to help save on battery life.. and also when I enter work where I cant have the phone on.
Don't suppose you'd share how you get the tower information? I tried a method posted on the forums but it doesn't work for me and only works when the data/voice is not connected.
I tried to implement this into an application I use as a backup to give a rough location if GPS location isnt available but never managed to read a sensible string for the towers ID.
(If you'd rather not say I understand fully)
Thanks,
sam
Great!, make a profile changer based on location also, that will be awesome
Update 1.0.3
• Bug Fixed : If you were out of sleep location and returned to sleep location after 12 mid night(with in the sleep period) application would skip the current sleep.
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
ArcticCat said:
I LOVE it, actually I've been looking for something like this every since I switched from my Nokia communicator 9000
2 suggestions
1- would it be possible to "rename" locations to something more intuitive?
2- I'd like to be able to trigger an alarm on entering a location that way if u are on a train your phone can wake u up when you reach your destination
thanks
Click to expand...
Click to collapse
Thanks for the reply,
But right now the application just supports one location, So you are not able to do multiple locations. If you use the slot of managing only alarms its fine. But if you want to do alarm and also in some other location some other action you can not.
But i have that featrue in my list though
To do it, right now you have to set to 'Run Mode' and in the run mode specify any media file, On entering your location the media will be played.
Hi tytnguy,
found a "mini minor" bug in latest version 1.0.3...
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Next step in version profiles would be great
Best regards,
Olioaglio
Olioaglio said:
Hi tytnguy,
If you just append a new location and change nothin other
the Save function don't gets active and so if you just press
OK the new location won't saved and neither the window don't
pop up asking wether you want to save or not.
So you have always to tap any other function on/off additionally
to be able to save Hope you understand this
Olioaglio
Click to expand...
Click to collapse
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
Olioaglio said:
Next step in version profiles would be great
Olioaglio
Click to expand...
Click to collapse
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
tytnguy said:
Understood, For now to enable the save button you can Uncheck and Check the 'Enable' checkbox as you suggested
I know others also requested it, but what type of 'Profile' you are asking for? Is it changes the sound profiles to change between different sound modes? Or change lot of options such as sound+wifi+bluetooth+backlight+....etc?
Click to expand...
Click to collapse
I would like location based profiles with different schedule times,
so that you could e.g. install a "Home location" with flightmode from
11pm to 8am (like it is now) and a second profile maybe for work
with flightmode from 12am to 1pm. Or maybe a profile with 24/7 flightmode
on a certain location. Lets say you work in a hospital and while you
enter the lcation phone would turn to flightmode. If you leave phone would
switch on again.
The wifi+bluetooth+beam etc options would be also a geat thing to include
as an option with checkboxes, so one could save even more battery at night
and in sleep location would not be any electro smog.
But for now I can live very good with the program as the main function
works like it should now. One little thing: Found out, that if you reset the
phone within schedule time and phone was turned on (manually) rk-sleep
wont turn it off again. But this may be wanted as not to nag you if you
decide to manually turn on.
Olioaglio
What is the Net Compact framework that it needs! I'm running WM5, and it doesn't work on my device and I supose it has got something to do with what I mencioned earlier. Thanks.
Hi
I did notice that sometimes, the POWER settings on my HD change by thenselves.
The backlight time values for 'on battery' and 'on external power' are increased drmaticaly. The The Backlight level values are decreased to their minimum values (although I use the 'auto adjust backlight').
I suspect that one of the programs I'm using causes all that.
I had installed amongst others the following programs:
S2U2
WkTASK
Please advice
I got similiar problem, these options are checked, but somehow, it will become unchecked.
I don't have S2U2 installed, I guess it is by other means......
Anyone can advice on this?
Some Navigation Applications alter these settings, cuz you need the device to be always ON while using navigation!
But I guess the real cause is that from the Navigation application itsself and/or Exiting the application in a wrong way i.e.: Terminate it, not using the EXIT Menu.
Give it a try, and let us know
Willy
I've been scouring the forums with no luck so far, I need a way to disable the lock that is attached to a short press of the End Key on my Touch 2's.
Reg Tweak, app any suggestions welcome, its causing me quite a problem, I want to roll these out for a corporate app and the kiosk I use is not blocking this operation.
Cheers - Sam
i m also searching for the same solution , any help ?
if you search by google you can find solution. For this time i write solution but in future search first with google or in this forum with search tools
For disable lockscreen you can modify this
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen:Enable "0"
You can use ceregedit (with pc) or PHM registry editor
fabcal said:
if you search by google you can find solution. For this time i write solution but in future search first with google or in this forum with search tools
For disable lockscreen you can modify this
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen:Enable "0"
You can use ceregedit (with pc) or PHM registry editor
Click to expand...
Click to collapse
Dude,
I've tried doin that but all u're gonna do is invoke the old lockscreen from previous WM version... I think what the other guy wants is totally no lockscreen at all =)
yep
tried that, we really need the lock and screenlock removing so this button does nothing at all
lockscreen dll?
I think that the function is given by dll lockscreen.dll. Tonight I try to replace it and see what happens. We'll let you know later.
hi, I was trying some software in my Touch and I got myself into situation where my phone did not lock up after pressing "power off" button but I was still able to lock the screen using Lock software button/icon. It was simply result of installing S2U2 and configuring it as default lockscreen.
If you perform these steps only known way to return to default state is hard reset!
Install S2U2.
right after installation goto start menu > directory s2u2 > click on S2U2 and it should se itself.
Uninstalll S2U2
in settings > lock set your default lock screen
nohandle said:
hi, I was trying some software in my Touch and I got myself into situation where my phone did not lock up after pressing "power off" button but I was still able to lock the screen using Lock software button/icon. It was simply result of installing S2U2 and configuring it as default lockscreen.
If you perform these steps only known way to return to default state is hard reset!
Install S2U2.
right after installation goto start menu > directory s2u2 > click on S2U2 and it should se itself.
Uninstalll S2U2
in settings > lock set your default lock screen
Click to expand...
Click to collapse
Well you can recover the original lock screen and everything by downloading this file http://acs2.mstreme.com/download/RestoreWM65DeviceLock.cab.
For more info check s2u2's FAQ, under WM 6.5, "Q. How to restore the WM6.5 built-in lock?", here http://67.43.3.117/~acs2co/S2U2-faq.html
disable in WM6.5 the Key Lock / Keylock at Standby
I find a possibility to deactivate the Key lock in standby at Windows Mobile 6.5 :
with this registry key:
Add a new "DWORD" value
in HKEY_CURRENT_USER/ControlPanel/Keybd
Name: DeviceLockWhenSuspend
Value: 0
after this take a softreset and have fun