Database Users

CID unlock from bootloader ?

I have original HTC Advantage 7500 not branded with Spanish windows . After tried to update with English RUU my htc Advantage stuck in 3 colors boot-loader mode. Any resets(soft, hard, boot-loader) not help.
Than I find this suggestion here I tried it and it help:
I think you are not stuck in bootloader, I think you are stuck in the Flash
ROM utility which has colors and not just the Dopod logo with a black scree.
If this is the case, here it is what I did to solve this:
I downloaded ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.
00.10_108_ship, which you already did.
Decompiled the RUU_signed.nbh contained inside
ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32. 00.10_108_ship with
dutty's good NBH tool found at: http://forum.xda-
developers.com/showthread.php?t=296316 then I created a new RUU_signed.nbh
with the same files but it didn't allowed me to insert some items like the
SIRFBootLoader.nb and some others, so I started executed the
ROMUpdateUtility.exe again and it stopped again at 1% but with a different
error "Corrupted ROM Image" and suddenly! My device was taken out of the
Flash Utility to see the bootloader screen again! Wow! What a relief!
Click to expand...
Click to collapse
this is done!
after that my Spanish OS reloaded and I can to do ActiveSync with PC - Than I find the suggestion in this thread how to flash any ROM to CID locked and I tried it and after 5 min connecting error occurred . After hard resetting after this "update", after the HTC boot screen I just get a white screen. The HTC does make a sound as if it's working and BT and WiFi leds blink. When device connected to PC the HTC does make a sound as if it's working, but the ActiveSync with PC not work, it write that can't to connect to mobile device. And I just can't see anything just white screen.
I can't find Spanish HTC Advantage 7500 not branded RUU in all World.
So I need cid unlock without ActiveSync - from bootloader?!
Please help(I also ready to help - I will send donate).

Htc hd2 brick =(

Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((

i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))

so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.

[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...

gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)

i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...

you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.

Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.

" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?

yes....choose the hk site

Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.

the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM

Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs

Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks

Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process

HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks

Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...

NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.

NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.

xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?

Bricked Jasjam , plz help

Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....

if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.

Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??

I think I've got same problem..
It can't run again after splash screen..

[Q] Help on fixing hd2 that wont boot up

Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .

If it doesn't install, and nothing installs, then you need to take it to repair I guess.

I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.

frequency1 said:
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
Click to expand...
Click to collapse
why dont you try sd card method for flashing your rom !1! you can pm me if you need further help

Do you mean that it can't get to the boot loader screen (rainbow) or that trying to install a ROM from there didn't work? You might want to flash the original HSPL too, just to check.

What I mean is that everytime I boot up the hd2 it stays stuck on the splash screen. It doesn't even show the rom information in red at the bottom left corner of the screen. But I can boot to the tri color menu though. I have tried to install the tmous official rom by plugging the USB when I'm in the tri color menu and it always stays stuck at 9%. So is there way to fix this or am I screwed.
Sent from my Android Powered HD2 using XDA App

Try the sd-card recovery instead of the USB one.
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
After that, even if it fails, it shows only SPL in the tri-color screen then you are set to claim warranty.

frequency1 said:
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
Click to expand...
Click to collapse
Well my bro... i think thats nand problems or heating issues ... does flashing rom goes all ok or it stops during flashing ? if stops than check if you phone is hot - hotter than normal.
Try this : Take out battery, memory card, sim card and put you phone in the fridge for about 5-10 min ( dont worry tried many times... no harm ) meanwhile prepare your sd card to flash rom with sd card method ... to do that extract Ruu rom - stock one - download with hd2 serial nr ( winrar, 7zip etc) find Ruu_Signed.nbh rename it to LEOIMG.nbh than copy to sd card ( format you sd card fat32 and make sure it works ... 2gb will work ) take phone out from fridge put sd card & battery into phone power one phone while holding volume down key ( go into tricolor screen - bootloader) and follow procedure in phone... i hope everything goes well and you fix you phone... but if still no success than flash android or wp7 ( if you have warranty flash stock SPL and return phone).
best regards from me

Stuck @ Hboot with S-ON after trying Advanced Ace kit to unlock Telus Desire HD

So I have Telus Desire HD that I'd like to use with Koodo (I already have the sim card) and I tried the AAHK to root/unlock it. Everything was going smooth until it asked me to press the power button in HBOOT to continue, I did so and now the phone is stuck on weird boot loops at the HTC logo. I can go in HBOOT and android stock recovery (is that what it's called?) but as soon as I put an sdcard in the phone. Note: I cannot boot in HBOOT with an sdcard in the phone, it will just freeze and boot loop (I have no idea why, and the sd card is working perfectly fine in my SGS and my friend's desire Z. I have a couple questions, is my phone bricked? I don't think I have any backup (I don't mind losing everything, nothing of value was in it). What should I do to get back to a stock (or rooted/unlocked rom)? Right now my priority is to get to a normal rom, I'll probably just unlock the sim card normally (by paying) as it seems unlocking HTC phones is 45 steps longer/harder than doing so on my SGS. Thanks a lot guys!
P:S Sorry for my english I probably made a couple mistakes (french canadian reporting in!)

Nutriment said:
So I have Telus Desire HD that I'd like to use with Koodo (I already have the sim card) and I tried the AAHK to root/unlock it. Everything was going smooth until it asked me to press the power button in HBOOT to continue, I did so and now the phone is stuck on weird boot loops at the HTC logo. I can go in HBOOT and android stock recovery (is that what it's called?) but as soon as I put an sdcard in the phone. Note: I cannot boot in HBOOT with an sdcard in the phone, it will just freeze and boot loop (I have no idea why, and the sd card is working perfectly fine in my SGS and my friend's desire Z. I have a couple questions, is my phone bricked? I don't think I have any backup (I don't mind losing everything, nothing of value was in it). What should I do to get back to a stock (or rooted/unlocked rom)? Right now my priority is to get to a normal rom, I'll probably just unlock the sim card normally (by paying) as it seems unlocking HTC phones is 45 steps longer/harder than doing so on my SGS. Thanks a lot guys!
P:S Sorry for my english I probably made a couple mistakes (french canadian reporting in!)
Click to expand...
Click to collapse
Download the RUU corresponding to your phone's region from the following link:
http://www.filefactory.com/f/efa28fefafc4af9c/
Run the RUU on your PC with your DHD connected via USB.
This will restore your DHD to default.

When I launch the RUU (.exe) I follow all the steps but it says error 170 (phone is not plugged in) but I'm using the stock cable. Are my usb drivers not good? I'm using HTC sync. Or did I download the wrong version and it does not recognize the telus desire HD as the good one?
edit: I followed the tutorial for this
http://forum.xda-developers.com/showthread.php?t=737728
as I saw Android 1.0 with a yellow mark next to it in the device manager and now when I try to launch the RUU it says the battery is below 30%. For some reasons when I plug the Desire HD the orange led would light and then close after a couple of minutes (not charging) so I don't know what the problem is, the battery was working perfectly fine before.
edit2: The led is now green with means the smartphone is fully charged but the RUU keeps telling me that the battery power is below 30%. That is getting very annoying!

You need to recharge your phone to above 30% in order for the RUU to work.
Charge your phone for a couple hours and then try again.
Sent from my HTC One X using Tapatalk 2

Nutriment said:
When I launch the RUU (.exe) I follow all the steps but it says error 170 (phone is not plugged in) but I'm using the stock cable. Are my usb drivers not good? I'm using HTC sync. Or did I download the wrong version and it does not recognize the telus desire HD as the good one?
edit: I followed the tutorial for this
http://forum.xda-developers.com/showthread.php?t=737728
as I saw Android 1.0 with a yellow mark next to it in the device manager and now when I try to launch the RUU it says the battery is below 30%. For some reasons when I plug the Desire HD the orange led would light and then close after a couple of minutes (not charging) so I don't know what the problem is, the battery was working perfectly fine before.
edit2: The led is now green with means the smartphone is fully charged but the RUU keeps telling me that the battery power is below 30%. That is getting very annoying!
Click to expand...
Click to collapse
how many times have i seen this problem,u wont be able to run the ruu from ur computer whatever u do coz ur phone will never show up coz u have messed up ur bootloader, the tutorial that u followed above for adb works only for phones who have driver problem and not for messed up bootloader. i am not sure if u can run ruu (PD98IMG.zip) from fastboot, coz u said ur device is s-on, but may b give it a try,U will have to install the RUU (PD98IMG) from fastboot (Make sure not to flash a Froyo RUU on a phone shipped with gingerbread).. i am sure u knw how to flash the RUU using PD98IMG from fastboot,if u dnt let me know i will tell u.. just do it and everything will be fine and u will return to stock and u will also loose root,so u will have to root it again.P.S ur battery is fully charged its just that u used the wrong tutorial for ur phone to make adb work its behaving strangly. try using a sd card say 1gb or 2gb n see if ur phones hangs with the sd card..good luck..n dnt worry i am sure someone will surely sort out ur problem..cheers...