Related
I rooted my Hero today which runs the latest HTC ROM. There were no problems and it now works fine to run apps as root. Though I can't get wifi tethering to fully work. The computer connects fine, receives an IP address but doesn't get any Internet connection - the gateway can't be pinged. This happens both with Wireless Tether and aNetShare.
I wonder if it has to with the HTC ROM? Has anyone else gotten it to work with this ROM? I really would like to continue using it as I've gotten everything configured just as I want it and this is the only obstacle right now.
hey everyone, I LOVE cm7 and stock android, but I use my phone to tether more than anything else and I need a solid tethering solution. My problem is that Wireless Tether app doesn't work with CM7 (at least last time I tried it) and the built in tether doesn't seem to work for me, (broadcasts but I don't get any internet connection)
Does anyone know of a way to Fix wireless tether app or why the built in one isn't working for me?
use barnacle tether, its free. but if the default settings arent working then go into the barnacle settings and click the "skip-wpa supplicant" or something like that. if it didnt work the first time it should work then
Thanks! I'll try that
I use the built in tether quite often on CM7. I am running rc3 right now and haven't had a chance to test it out but it has worked on the last 4 nightlies I've run.
Durkbeef said:
hey everyone, I LOVE cm7 and stock android, but I use my phone to tether more than anything else and I need a solid tethering solution. My problem is that Wireless Tether app doesn't work with CM7 (at least last time I tried it) and the built in tether doesn't seem to work for me, (broadcasts but I don't get any internet connection)
Does anyone know of a way to Fix wireless tether app or why the built in one isn't working for me?
Click to expand...
Click to collapse
the reason why the built in tether does not work for you is because you either used a wireless tether app or you have one installed. what you have to do is you must uninstall all wireless tether apps you have and then you must reflash your mod and obviously reboot once you do that it will be working for you. trust i just had this problem and i did a lot of research on it and i actually figured this out today and it worked. so give it a try and let me know how it goes. ^_^
would love to say this is the problem but it isnt
has something to do with dhcp, i can connect wirelessly to the phone np but wont get an internet connection because the phone decides to flake out and not assign an ip address for my laptop.
I tried to connect it earlier and it didnt work but i left it connected. I walked away, came back 10 minutes later and finally got an ip address and internet on my laptop. so either it just takes its sweet time assigning an ip or its tempermental
all good here
hi,
of no real help, but I am using CM7 stable and mine works without issue.
CM7 Final here and it works fine for me. Like others suggested, try wiping and reflashing.
Sent from my T-Mobile G2 using XDA App
Ok so I got wireless tethering to work form my rooted Epic 4g to my galaxy tab 10.1 and its pretty cool. I did it with wireless tethering version 3. The only thing is that at first i couldn't get it to work because of the authentication once I turn off the encryption on my Epic it worked perfectly and connected right away. But what I don't get is why it doesn't work with the password if anyone can give me some advise why this is happening it would be cool, Thanks.
Strange, I tether all the time without issue. Should be possible. Are you using an app or built-in settings for tethering.
I got the app version (V3 is the only one that works) . I mean it works,..just not with the password on.
I use wifi tethering with my samsung galaxy phone with tmobile. you should try changing setting in build in tethering app and see if this works. I use 'quick settings' free app from market for quick access to wifi hotspot settings.
I have this problem too, it tethers fine but whenever it comes to things requiring password (like email logins) it rejects the password.
can any one who doesnt have this problem share which software they use for tethering?
how did you get tethering to work? i have tried the wpa_supplicant hack but the wifi drops every 10 seconds. what rom are you running & what supplicant file did you use?
It only works right with wireless tethering app version 3. Apparently if you have the rom that has it built in you shouldnt have any problems.
This is what i used http://code.google.com/p/android-wifi-tether/downloads/list
I use bluetooth tethering fron my Win Mobile Treo Pro running wmwifirouter. I got tired of trying to root and do the wpa supplicant thing. Android needs to support adhoc wifi out the box across the board. So ridiculous really by now.
Still Cannot Tether
Ok...so Im still on an older phone ( Droid Eris ) but it's rooted running Gingerbread and the wireless tether v.2.07 works great with my laptop but wont work at all with the Galaxy Tab? I really don't understand this. I have tried everything from leaving it completely open to setting up all the appropriate authentication and access control. I tried the link in the thread for 3.0 and even select the Desire..which I think is the basis of the rom I am on...and just got errors in the log.
Anyone else having these issues? Not sure why it works fine on the laptop but not the tablet?
thanks
I am running v 2.0.7 on a myTouch. When I wireless tether with access control on I can check Gmail,but browser will not get websites. If I turn off AC, then browser works OK.
bradrobster said:
Ok...so Im still on an older phone ( Droid Eris ) but it's rooted running Gingerbread and the wireless tether v.2.07 works great with my laptop but wont work at all with the Galaxy Tab? I really don't understand this. I have tried everything from leaving it completely open to setting up all the appropriate authentication and access control. I tried the link in the thread for 3.0 and even select the Desire..which I think is the basis of the rom I am on...and just got errors in the log.
Anyone else having these issues? Not sure why it works fine on the laptop but not the tablet?
thanks
Click to expand...
Click to collapse
I think that 2.07 is ad-hoc only and honeycomb doesn't support ad-hoc. (someone correct me if I'm wrong). There are a few threads around here somewhere where you can replace/edit a file that allows ad-hoc support. As to your other question, I use Wifi tether-pre11 and it works without issue. I'll link it to you. Make sure you change "device profile" under settings in the app to correspond with your device. I had troubles with the app until I set the device profile to my device. Depending upon your luck, you may have to try a few different pre-release files on wifi tether 3.0 to find the right one. Like I said, pre11 works great for my Epic, but your device may be different. Just don't use the top one (test2) as I recall seeing that its meant for Samsung devices.
Link: http://code.google.com/p/android-wi...mmary+Uploaded+ReleaseDate+Size+DownloadCount
Here's info about getting ad-hoc on GT10.1. Haven't tried it yet
http://forum.xda-developers.com/showthread.php?t=1123638
Hope that helps. Report back your findings
dan0814 said:
Ok so I got wireless tethering to work form my rooted Epic 4g to my galaxy tab 10.1 and its pretty cool. I did it with wireless tethering version 3. The only thing is that at first i couldn't get it to work because of the authentication once I turn off the encryption on my Epic it worked perfectly and connected right away. But what I don't get is why it doesn't work with the password if anyone can give me some advise why this is happening it would be cool, Thanks.
Click to expand...
Click to collapse
Have an epic and I'm running 3.0 pre11 and I can use encryption. Its under deprecated downloads in the google code page. See above link.
Don't forget to hit "Thanks" if I helped!
i am actually tethering thru my epic to post this. The wifi tether is screwy for our phones. I use SFR1.2 and geno1.1final. 3g works, 4g causes a instant reboot on the phone, but it works in infrastructer mode without issue.
Grommish said:
i am actually tethering thru my epic to post this. The wifi tether is screwy for our phones. I use SFR1.2 and geno1.1final. 3g works, 4g causes a instant reboot on the phone, but it works in infrastructer mode without issue.
Click to expand...
Click to collapse
Can you post those APK's or the instruction please, I have an Epic as well.
I use wifi tether to connect my thunderbolt to my gt10.1. With version 3 I have it set to softap (master) not ad hoc. Access control is on and I have the routing fix box checked for htc phones. I tethered well over 1gb this morning with no problems
Sent from my Thunderbolt using Tapatalk
Check the android development section of the epic section.. SFR1.2 is the rom, Genocide 1.1final is the kernel. They include wifi tether that works for the epic in the rom..
dan0814 said:
Can you post those APK's or the instruction please, I have an Epic as well.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Premium App
omgitzsars said:
I think that 2.07 is ad-hoc only and honeycomb doesn't support ad-hoc. (someone correct me if I'm wrong). There are a few threads around here somewhere where you can replace/edit a file that allows ad-hoc support. As to your other question, I use Wifi tether-pre11 and it works without issue. I'll link it to you. Make sure you change "device profile" under settings in the app to correspond with your device. I had troubles with the app until I set the device profile to my device. Depending upon your luck, you may have to try a few different pre-release files on wifi tether 3.0 to find the right one. Like I said, pre11 works great for my Epic, but your device may be different. Just don't use the top one (test2) as I recall seeing that its meant for Samsung devices.
Link: http://code.google.com/p/android-wi...mmary+Uploaded+ReleaseDate+Size+DownloadCount
Here's info about getting ad-hoc on GT10.1. Haven't tried it yet
http://forum.xda-developers.com/showthread.php?t=1123638
Hope that helps. Report back your findings
Have an epic and I'm running 3.0 pre11 and I can use encryption. Its under deprecated downloads in the google code page. See above link.
Don't forget to hit "Thanks" if I helped!
Click to expand...
Click to collapse
Ok..finally followed the guide here and replaced my wpa_supplicant using the links provided. I have wireless tether v3.0pre14 working with no authentication. I am now going to play with authentication and may back down to pre11 since you had good luck with it. I am surfing solid with no drops...video streaming is fairly slow but thats to be expected I would assume. I am running rooted 10.1 retail 32MB with Verizon Droid Eris rooted running GB 2.3.3.
Many THANKS for the help!
Just to add a data point, I hadn't tried tethering my Tab to my Thunderbolt until I read this thread. I am running Wireless Tether 2.08pre. I set up access control and also enabled wifi encryption. I used it for about 20 minutes without any problems. That includes email, surfing the internet, and YouTube.
I too can tether the GT 10.1 with my HTC Thunderbolt using Wifi Tether, but am having trouble with the Samsung Droid Charge. Anybody get the Charge to tether successfully? TIA!
I'm not rooted and updated to ICS this morning. Brought my transformer to work with me since I was excited and was tethering to my phone via ad-hoc fine. I then decided to do a factory reset to clear up the tablet and do some optimization. Next thing you know I can no longer tether to my phone so now I'm stuck without wifi.
My tether network shows up in the available wifi list but when I try to connect it just saves the network but not connect. Does anyone have suggestions on how to fix this?
There is no reason that a factory reset would block it from being able to connect to a ad hoc network. The only thing that I can think of is that you typed the password wrong but like I said there is no reason it shouldn't work.
I didn't set any encryption on the tether network, it's the only way I was able to get tethering working previously.
Interesting, maybe reboot your phone? Like I said, I really don't think a factory restore could do anything that would prevent this from happening.
I was worried about the tethering. The Prime guys lost it with ics and had to root to get it back.
Yes, I have tried restarting my phone a few times. I was originally using android-wifi-tether 3.1b11 but have also tried barnacle tether, both have the same results. I'm attempting another reset on the transformer now in case I screwed something up on setup. I backed up all my apps before resetting the first time so at least I can install them, but no network access.
Asus had previously fixed ad-hoc in the August OTA, but it looks like the new ICS OTA doesn't have that fix anymore. So, you might try bluetooth pan networking instead. I don't think any amount of factory resets will get your ad-hoc wifi back without actually reverting to a pre ICS install.
I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help
ZeNiTH456 said:
I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help
Click to expand...
Click to collapse
Dude, PdaNet has a (new) version for ICS for free. It does bluetooth and more. You might want to check out.
Just fired up wireless tether, connected to it and browsed the web with no problems.
ZeNiTH456 said:
I was able to find a wifi tether profile that allowed me to put my phone into AP mode so it's now working without ad-hoc. Thanks for trying to help
Click to expand...
Click to collapse
What did you end up using? The same exact thing happened to me.
34Ford said:
I was worried about the tethering. The Prime guys lost it with ics and had to root to get it back.
Click to expand...
Click to collapse
I came from Revolver. After the ICS update my tether had no issues. I use the app WiFi Tether.
The only thing I noticed is that ICS does not gracefully disconnect after I shut tether off. In fact, the wireless rings for signal indicator grey out but are all still present. After a while, I turned the tether app back on and had to dicsonnect/reconnect wifi on the tab. There was a message like something about "continued poor signal". After the standard off/on of wifi all was good.
Thanks, thats what I was using but I had a really old version. I guess I should update my apps more.
Hey guys I was wondering if anyone found out how to tether wifi with the S 5 without root? I want to use Foxfi if that makes a difference. I had root on my old phone and screwed it up so bad when I went to rom it I am nervous about doing it again...
Also I do have more than one post count I just forgot my login .
Setting
tethering and mobile hotspot
turn it on !!