hey everyone, I LOVE cm7 and stock android, but I use my phone to tether more than anything else and I need a solid tethering solution. My problem is that Wireless Tether app doesn't work with CM7 (at least last time I tried it) and the built in tether doesn't seem to work for me, (broadcasts but I don't get any internet connection)
Does anyone know of a way to Fix wireless tether app or why the built in one isn't working for me?
use barnacle tether, its free. but if the default settings arent working then go into the barnacle settings and click the "skip-wpa supplicant" or something like that. if it didnt work the first time it should work then
Thanks! I'll try that
I use the built in tether quite often on CM7. I am running rc3 right now and haven't had a chance to test it out but it has worked on the last 4 nightlies I've run.
Durkbeef said:
hey everyone, I LOVE cm7 and stock android, but I use my phone to tether more than anything else and I need a solid tethering solution. My problem is that Wireless Tether app doesn't work with CM7 (at least last time I tried it) and the built in tether doesn't seem to work for me, (broadcasts but I don't get any internet connection)
Does anyone know of a way to Fix wireless tether app or why the built in one isn't working for me?
Click to expand...
Click to collapse
the reason why the built in tether does not work for you is because you either used a wireless tether app or you have one installed. what you have to do is you must uninstall all wireless tether apps you have and then you must reflash your mod and obviously reboot once you do that it will be working for you. trust i just had this problem and i did a lot of research on it and i actually figured this out today and it worked. so give it a try and let me know how it goes. ^_^
would love to say this is the problem but it isnt
has something to do with dhcp, i can connect wirelessly to the phone np but wont get an internet connection because the phone decides to flake out and not assign an ip address for my laptop.
I tried to connect it earlier and it didnt work but i left it connected. I walked away, came back 10 minutes later and finally got an ip address and internet on my laptop. so either it just takes its sweet time assigning an ip or its tempermental
all good here
hi,
of no real help, but I am using CM7 stable and mine works without issue.
CM7 Final here and it works fine for me. Like others suggested, try wiping and reflashing.
Sent from my T-Mobile G2 using XDA App
Related
I've been searching on xda and google how to use CM tethering on my G1 to my Mac. I cannot figure it out for the life of me, that is why I am posting this. Is there a step by step for the mac? If so, can someone please help me out?
I'm not sure what you mean by CM tethering. Maybe Cyanogen Mod?
Anyway Tethering is pretty easy with a PC.
Root put on a tethering app. The last five ROMS I flashed on my MT3G had the app built in. Currently using Super-D. Should be the same for a G-1.
Open the app. By default it's wifi, although you can configure Bluetooth. But Wifi doesn't require pairing.
Just start the tethering app on the phone and it becomes an access point. Just like a wireless router.
So on the PC I search for wireless signals and find the one with my phones name and connect. I could add security if I wanted, but rarely do.
So if you can connect to a router with a Mac I guess you could tether.
I'm just assuming of course because I've touched a Mac for about 3 minutes in my life.
I don't know if that will help you at all. I'm assuming you've rooted and installed cyanogen? I think his apps come in an accessory pack or something. Cyanogen is honestly more complicated for me to install that Super-D or WG which have everything all in one for the most part. Sometimes they need ringtones.
Anyway do you have a 'Tethering App' on your phone? It looks like a green wedge.
I think OSX lacks the drivers for wired tethering (includes the settings option), but you might have luck with the wireless tethering app.
I have a Mac. Just use a wireless tether app. When you turn it on your phone will act as a wireless router. Get your Mac to scan for wireless networks and you should find one that says G1 Tether. Connect to it and you should be good to go. This is all I have ever done and I have never had any problems.
Thasro said:
I have a Mac. Just use a wireless tether app. When you turn it on your phone will act as a wireless router. Get your Mac to scan for wireless networks and you should find one that says G1 Tether. Connect to it and you should be good to go. This is all I have ever done and I have never had any problems.
Click to expand...
Click to collapse
So like I said, it should be just as simple as on a PC.
Assuming the OP has rooted his G1.
(Except you can't do it through USB)
yeah i always use the wireless tether for root users app at work, it works just fine for me =], in all of about 2-3 clicks isntant internet =]
same for me
I have a Mac. Just bought it like, 3 days ago. It was Tethering very well until 7 hours after I bought it, and now it doesn't connect to my G1. Any help?
I rooted my Fascinate, mostly to be able to WiFi tether it for my laptop and the Kindle I'm getting soon.
I've tried WiFi Android Tether app, Barnacle, and Barnacle Legacy.
The Barnacle App would give me an error along the lines of "Can't find eth0", then Barnacle Legacy(previous version) app did not give me an error but the laptop will just say "Connecting" then never actually connect.
I have the same problem with the WiFi Android Tether App where it keeps "Connecting" but never connects.
I don't think it is my laptop because I never have a problem connecting to any other WiFi...
I've looked everywhere but I can't find any help!!
-Johnny G
Almost sounds like you're not fully rooted. Do you see the Superuser app in your app list? Also, did these apps ever prompt you to allow root access?
Sent from my SCH-I500 using XDA App
yes
yes to superuser app.
the ADB prog says i am rooted
other root progs like SETCPU work
and the root progs ask for superuser permissions and i can set them
Look in General forum and for confirmed working widow tether. I use widow tether daily on mine. Works great. Have a nice day
Sent from my SCH-I500 using XDA App
Ive tried that exact one, computer wont connect.ive even tried pre12
I've tried quite a few different apps to no avail, but tried pre9 tonight and it appears to be working nicely.
I must be missing something, cause I'm a noob, but what is widow tether & where can I get it? Tried 2 barnacles & 3 wifi tethers with no success.
Sent from my SCH-I500 using XDA App
You need to use the wireless tether 2.0.5 pre9, not the latest version.
That one works 100%.
Newest ones don't. This is already covered somewhere in the stickies.
http://code.google.com/p/android-wifi-tether/downloads/detail?name=wireless_tether_2_0_5-pre9.apk
Sent from my SCH-I500 using XDA App
i am using Pre9. Thats the one I was originally using when the problem occured.
I'm using wireless tether pre11 right not and so far so good. I kept getting an issue where wireless tether would work for a short time (about 1 to 2 MB of data) and then would hang. pre11 is working good so far without this issue. give it s shot. you can always drop back to an older version.
I'm having the same problem, my Vista laptop sees the network and won't connect, my wife's Windows 7 netbook will connect now problem, so I know the phone is working right, it has to be something with Vista 64
sonar_chris said:
my Vista laptop
Click to expand...
Click to collapse
I think I see your problem...
Thanks for the pre9 info. I was having issues connecting and it fixed things right up.
sic4672 said:
I'm using wireless tether pre11 right not and so far so good. I kept getting an issue where wireless tether would work for a short time (about 1 to 2 MB of data) and then would hang. pre11 is working good so far without this issue. give it s shot. you can always drop back to an older version.
Click to expand...
Click to collapse
I've had no problems with pre11...I've only used it a few times, but I did stream an entire episode on Hulu on my desktop and it worked without a hitch. I am on OSX.
FWIW, I happened to root & installl barnacle last night on my Fascinate. Barnacle worked happily once I made sure that A)Superuser automatically allows barnacle permissions and B) Skip wpa_supplicant was checked. I've only had an hour or two of testing, but no glitches.
Info: SCH-I500[RKAVZW] - i500.04, 2.1-update1, 2.6.29
Barnacle: Encryption: Off Access Control: unchecked, Ch:1 Custom Wifi Ad-hoc: none, Skip wpa_supplicant: checked, pp0, eth0, DHCP: 1200s lease, NAT 32000, 300, 100, 30, 90
I use Easy Tether and it works flawlessly.
Not sure exactly what is going on with your issue...however FWIW:
Any build of Wireless Tether would cut out on me occasionally - it wouldn't drop connection permanently, but rather for several seconds.
I use tethering to play online games that require a constant stream of data. Barnacle Wifi Tether Legacy works flawlessly. Never lose connection.
Are we looking at a fluke kernel issue with the OP's question?
I have tried all of these options and can't get any to work. The only thing that does is the stock hotspot app I reprogrammed from a thread here. How are you getting this to work? Do I need to remove the vzw hotspot app first?
Sent from my SCH-I500 using XDA App
moonrequiem said:
Not sure exactly what is going on with your issue...however FWIW:
Any build of Wireless Tether would cut out on me occasionally - it wouldn't drop connection permanently, but rather for several seconds.
I use tethering to play online games that require a constant stream of data. Barnacle Wifi Tether Legacy works flawlessly. Never lose connection.
Are we looking at a fluke kernel issue with the OP's question?
Click to expand...
Click to collapse
Barnacle (did not try legacy) is also more stable for me than wireless tether pre9/11/12
ok so i got the visionary temp root and i tried to use barnacle wifi tethering but i cant get it to connect with my laptop.. it keeps saying no internet access. so i used the stock tmobile hotspot and it seems to work just fine but i didnt know if it would charge my bill or not? does anyone know if it will? also is there another wifi tethering app i can download that works for maybe one of u guys? thanks
s10shane said:
ok so i got the visionary temp root and i tried to use barnacle wifi tethering but i cant get it to connect with my laptop.. it keeps saying no internet access. so i used the stock tmobile hotspot and it seems to work just fine but i didnt know if it would charge my bill or not? does anyone know if it will? also is there another wifi tethering app i can download that works for maybe one of u guys? thanks
Click to expand...
Click to collapse
I do not THINK Barnacle is compatible with the Kernel in the Sense ROM, that they are using.
Try using the Google Code Wifi application. http://code.google.com/p/android-wi...etail?name=wireless_tether_2_0_6.apk&can=2&q=
That one should work fairly well for you.
Never posted anything that made it into someones signature before. Thats awesome.
I've used all 3 "Stock", Barnacle and the Google.Code one and they all 3 worked fine. I have stuck with the stock one (TMO not charging me for it either) because I prefer the UI for it and it connects first try every time for me. activate app, power up netbook and by the time my netbook is done powering up it has already connected itself to my phone a ready to go for a romp on the inter-web. I have been using it since day I got the phone and haven't received the text telling me I had to add tethering to my account... but then I never get anywhere near the 5GB "cap", my heaviest month was 1.51GB
neidlinger said:
I do not THINK Barnacle is compatible with the Kernel in the Sense ROM, that they are using.
Try using the Google Code Wifi application. http://code.google.com/p/android-wi...etail?name=wireless_tether_2_0_6.apk&can=2&q=
That one should work fairly well for you.
Click to expand...
Click to collapse
ok thanks i will try it next time i got a laptop...
Just found an awesome APP in the market called Pdanet Tablet you install it on your phone then on your tablet and use bluetooth to get internet to your tablet via your android phone!!!!
It works pretty well on my Epic to my Transformer!
No Root needed (This will be for those of us who have not hacked our phones to send off Wifi already.)
Not working on my tab :\
Edit: I fixed it. reboot helped.
Awesome find, thanks! It's not quite working consistently for me, but I was hoping the PdaNet dev would make a version just like this. I'm sure he'll get it working reliably soon enough...
tethering off my nexus s, 2.3 hotspot w00t.
Anyone get this to work on Droid X, 2.3?
An update: after I installed this app, my TF Internet connectivity was completely hosed. It might be coincidental, although I doubt it. Essentially, I lost the ability to connect to a number of services via wifi, even after I uninstalled the app. Couldn't connect to Google properties, Tapatalk couldn't connect, etc. Absolutely miserable.
Only way to fix it was to do a factory reset. Multiple reboots and reconfigs of wifi settings did nothing.
Moral: be careful with this app.
Sent from my Transformer TF101 using Tapatalk
I have not installed it yet in my tablet.
But I just read it from the market and they said you should remove the proxy setting after using it, otherwise the internet will not work anymore.
Not sure if they meant you will have to remove the proxy setting everytime you finished using it. That will be a hassle if we need to switch between wifi and BT every time.
works for me bluetooth tethering to my Droid Incredible. Havent tried it longer than 30 mins so I havent experienced any disconnects yet.
You do have to reset the proxy every time you use the app (set it to use it, disable it when your done). If you dont, wifi wont connect anymore (at least for me).
It is a little bit of a hassle, but i can live with it. At least the app gives you a shortcut to quickly change the setting.
<Laharl> said:
Just found an awesome APP in the market called Pdanet Tablet you install it on your phone then on your tablet and use bluetooth to get internet to your tablet via your android phone!!!!
It works pretty well on my Epic to my Transformer!
No Root needed (This will be for those of us who have not hacked our phones to send off Wifi already.)
Click to expand...
Click to collapse
Are you getting 4G speed off your Epic? I'm using wifi tether right now and only getting 3G speeds even if 4G is enabled, what kind of speeds are you getting?
lie_ui said:
I have not installed it yet in my tablet.
But I just read it from the market and they said you should remove the proxy setting after using it, otherwise the internet will not work anymore.
Not sure if they meant you will have to remove the proxy setting everytime you finished using it. That will be a hassle if we need to switch between wifi and BT every time.
Click to expand...
Click to collapse
That was probably my problem, thanks for pointing it out. Wish I'd seen this before doing the factory reset...
Sent from my Transformer TF101 using Tapatalk
It's. Giving me a bad signal error
I'm on 3.1 and my phone(Droid 2) runs leaked gingerbread
Not sure why you need an app. I wifi tether with my Nexus S and it works fine. Just have 2gb package from ATT. They don't seem to care.
I got it installed, and everything went smoothly except I have no internet access via browser, or gmail.
Otherwise, this looks like a good app, easy to use.
I tried this PDANet for Tablet. The first beta release was buggy and there was a lot of disconnects with some debugging prompts.
Then I saw they updated it several days ago.
After updating it, its still not a smooth experience.
Got it connected to the phone, launch the browser and I could browse the web, but after 2-3 web pages, then it will stop working.
Email does not seem to work for me. Both GMail client and the native Email client, none works for me. Google Map seems to work.
But again, the connection dropped very frequently.
Hi,
Does anyone know of a solution for the TF101 when the phone you want to tether to is not an android device. I am still using my trusty HTC HD2, and it's WiFi hotspot is "ad hoc" and not seen by the TF, and its bluetooth creates a PAN, and rudely tells me that the TF needs a NAP.
Maybe I can use the "windows mobile version of PdaNet on the phone with the android tablet PdaNet client on the TF??
Wifi hot spot on G2x works perfect and I get 4g speed will post screen shot when I figure out how..
G2x power
moonan said:
Hi,
Does anyone know of a solution for the TF101 when the phone you want to tether to is not an android device. I am still using my trusty HTC HD2, and it's WiFi hotspot is "ad hoc" and not seen by the TF, and its bluetooth creates a PAN, and rudely tells me that the TF needs a NAP.
Maybe I can use the "windows mobile version of PdaNet on the phone with the android tablet PdaNet client on the TF??
Click to expand...
Click to collapse
Prime 1.5 supports ad~ hoc connections.
Sent from my Transformer TF101 using XDA Premium App
Wireless tether works better for me? EVO 4G here.
david279 said:
Prime 1.5 supports ad~ hoc connections.
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Any way with stock ROM??
i tried this last night and couldnt get it to work with my rooted samsung galaxy s, so I just ended up doing the wpa method. Plus Prime 1.5 includes it now
Ok so I got wireless tethering to work form my rooted Epic 4g to my galaxy tab 10.1 and its pretty cool. I did it with wireless tethering version 3. The only thing is that at first i couldn't get it to work because of the authentication once I turn off the encryption on my Epic it worked perfectly and connected right away. But what I don't get is why it doesn't work with the password if anyone can give me some advise why this is happening it would be cool, Thanks.
Strange, I tether all the time without issue. Should be possible. Are you using an app or built-in settings for tethering.
I got the app version (V3 is the only one that works) . I mean it works,..just not with the password on.
I use wifi tethering with my samsung galaxy phone with tmobile. you should try changing setting in build in tethering app and see if this works. I use 'quick settings' free app from market for quick access to wifi hotspot settings.
I have this problem too, it tethers fine but whenever it comes to things requiring password (like email logins) it rejects the password.
can any one who doesnt have this problem share which software they use for tethering?
how did you get tethering to work? i have tried the wpa_supplicant hack but the wifi drops every 10 seconds. what rom are you running & what supplicant file did you use?
It only works right with wireless tethering app version 3. Apparently if you have the rom that has it built in you shouldnt have any problems.
This is what i used http://code.google.com/p/android-wifi-tether/downloads/list
I use bluetooth tethering fron my Win Mobile Treo Pro running wmwifirouter. I got tired of trying to root and do the wpa supplicant thing. Android needs to support adhoc wifi out the box across the board. So ridiculous really by now.
Still Cannot Tether
Ok...so Im still on an older phone ( Droid Eris ) but it's rooted running Gingerbread and the wireless tether v.2.07 works great with my laptop but wont work at all with the Galaxy Tab? I really don't understand this. I have tried everything from leaving it completely open to setting up all the appropriate authentication and access control. I tried the link in the thread for 3.0 and even select the Desire..which I think is the basis of the rom I am on...and just got errors in the log.
Anyone else having these issues? Not sure why it works fine on the laptop but not the tablet?
thanks
I am running v 2.0.7 on a myTouch. When I wireless tether with access control on I can check Gmail,but browser will not get websites. If I turn off AC, then browser works OK.
bradrobster said:
Ok...so Im still on an older phone ( Droid Eris ) but it's rooted running Gingerbread and the wireless tether v.2.07 works great with my laptop but wont work at all with the Galaxy Tab? I really don't understand this. I have tried everything from leaving it completely open to setting up all the appropriate authentication and access control. I tried the link in the thread for 3.0 and even select the Desire..which I think is the basis of the rom I am on...and just got errors in the log.
Anyone else having these issues? Not sure why it works fine on the laptop but not the tablet?
thanks
Click to expand...
Click to collapse
I think that 2.07 is ad-hoc only and honeycomb doesn't support ad-hoc. (someone correct me if I'm wrong). There are a few threads around here somewhere where you can replace/edit a file that allows ad-hoc support. As to your other question, I use Wifi tether-pre11 and it works without issue. I'll link it to you. Make sure you change "device profile" under settings in the app to correspond with your device. I had troubles with the app until I set the device profile to my device. Depending upon your luck, you may have to try a few different pre-release files on wifi tether 3.0 to find the right one. Like I said, pre11 works great for my Epic, but your device may be different. Just don't use the top one (test2) as I recall seeing that its meant for Samsung devices.
Link: http://code.google.com/p/android-wi...mmary+Uploaded+ReleaseDate+Size+DownloadCount
Here's info about getting ad-hoc on GT10.1. Haven't tried it yet
http://forum.xda-developers.com/showthread.php?t=1123638
Hope that helps. Report back your findings
dan0814 said:
Ok so I got wireless tethering to work form my rooted Epic 4g to my galaxy tab 10.1 and its pretty cool. I did it with wireless tethering version 3. The only thing is that at first i couldn't get it to work because of the authentication once I turn off the encryption on my Epic it worked perfectly and connected right away. But what I don't get is why it doesn't work with the password if anyone can give me some advise why this is happening it would be cool, Thanks.
Click to expand...
Click to collapse
Have an epic and I'm running 3.0 pre11 and I can use encryption. Its under deprecated downloads in the google code page. See above link.
Don't forget to hit "Thanks" if I helped!
i am actually tethering thru my epic to post this. The wifi tether is screwy for our phones. I use SFR1.2 and geno1.1final. 3g works, 4g causes a instant reboot on the phone, but it works in infrastructer mode without issue.
Grommish said:
i am actually tethering thru my epic to post this. The wifi tether is screwy for our phones. I use SFR1.2 and geno1.1final. 3g works, 4g causes a instant reboot on the phone, but it works in infrastructer mode without issue.
Click to expand...
Click to collapse
Can you post those APK's or the instruction please, I have an Epic as well.
I use wifi tether to connect my thunderbolt to my gt10.1. With version 3 I have it set to softap (master) not ad hoc. Access control is on and I have the routing fix box checked for htc phones. I tethered well over 1gb this morning with no problems
Sent from my Thunderbolt using Tapatalk
Check the android development section of the epic section.. SFR1.2 is the rom, Genocide 1.1final is the kernel. They include wifi tether that works for the epic in the rom..
dan0814 said:
Can you post those APK's or the instruction please, I have an Epic as well.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Premium App
omgitzsars said:
I think that 2.07 is ad-hoc only and honeycomb doesn't support ad-hoc. (someone correct me if I'm wrong). There are a few threads around here somewhere where you can replace/edit a file that allows ad-hoc support. As to your other question, I use Wifi tether-pre11 and it works without issue. I'll link it to you. Make sure you change "device profile" under settings in the app to correspond with your device. I had troubles with the app until I set the device profile to my device. Depending upon your luck, you may have to try a few different pre-release files on wifi tether 3.0 to find the right one. Like I said, pre11 works great for my Epic, but your device may be different. Just don't use the top one (test2) as I recall seeing that its meant for Samsung devices.
Link: http://code.google.com/p/android-wi...mmary+Uploaded+ReleaseDate+Size+DownloadCount
Here's info about getting ad-hoc on GT10.1. Haven't tried it yet
http://forum.xda-developers.com/showthread.php?t=1123638
Hope that helps. Report back your findings
Have an epic and I'm running 3.0 pre11 and I can use encryption. Its under deprecated downloads in the google code page. See above link.
Don't forget to hit "Thanks" if I helped!
Click to expand...
Click to collapse
Ok..finally followed the guide here and replaced my wpa_supplicant using the links provided. I have wireless tether v3.0pre14 working with no authentication. I am now going to play with authentication and may back down to pre11 since you had good luck with it. I am surfing solid with no drops...video streaming is fairly slow but thats to be expected I would assume. I am running rooted 10.1 retail 32MB with Verizon Droid Eris rooted running GB 2.3.3.
Many THANKS for the help!
Just to add a data point, I hadn't tried tethering my Tab to my Thunderbolt until I read this thread. I am running Wireless Tether 2.08pre. I set up access control and also enabled wifi encryption. I used it for about 20 minutes without any problems. That includes email, surfing the internet, and YouTube.
I too can tether the GT 10.1 with my HTC Thunderbolt using Wifi Tether, but am having trouble with the Samsung Droid Charge. Anybody get the Charge to tether successfully? TIA!