Model: SM-P600
Model name: GALAXY Note 10.1 Wi-Fi 2014 Edition
Country: Spain
Version: Android 4.4.2
Changelist: 2612580
Build date: Tue, 26 Aug 2014 09:23:15 +0000
Product Code: PHE
PDA: P600XXUCNH3
CSC: P600OXACNH3
MODEM: P600XXUCNH3
http://www.sammobile.com/firmwares/3/?download=35072
New Firmware - Europe
tap007 said:
Model: SM-P600
Model name: GALAXY Note 10.1 Wi-Fi 2014 Edition
Country: Spain
Version: Android 4.4.2
Changelist: 2612580
Build date: Tue, 26 Aug 2014 09:23:15 +0000
Product Code: PHE
PDA: P600XXUCNH3
CSC: P600OXACNH3
MODEM: P600XXUCNH3
http://www.sammobile.com/firmwares/3/?download=35072
Click to expand...
Click to collapse
At last some new firmaware for Europe - SM-P600! :good:
Can someone spot any changes to the old firmware from Spain?
Regards.
Is anyone experiencing the same problem with 5ghz wifi that others have had with the new firmware from Taiwan?
Ah good news!It seems that his tablet hasn't been abandoned!I only hope that this version will rollout in the other european country..
Giulio_tami said:
Ah good news!It seems that his tablet hasn't been abandoned!I only hope that this version will rollout in the other european country..
Click to expand...
Click to collapse
I've installed this, tablet working ok - too early to comment on changes.
It is rather sad and disappointing that there's still no official update for UK bought P600's ... a big samsung failure IMO
---------- Post added at 01:41 PM ---------- Previous post was at 01:29 PM ----------
egps2 said:
Is anyone experiencing the same problem with 5ghz wifi that others have had with the new firmware from Taiwan?
Click to expand...
Click to collapse
I've not followed the discussion as such, nor did I try the Taiwan firmware, however I have just verified I am connected via 5 Ghz (at work) just fine
The tablet was originally installed on android 4.3 UK, BTU. I've since flashed the initial spain 4.4.2, then this new one. I didn't reset at any point, so the CSC is still showing as BTU. It's possible an asian CSC (or anything outside europe) may result in different wireless availability due to rules over what channels are allowed in what countries, and I suspect this data is all part of the CSC definition
If that is the case, proper wifi may only come back with a hard reset/CSC switch. I'm no expert though it's just a hunch...
The same built is now out on Switzerland (AUT) too!!:good:
Guys, If I flash this firmware via ondin, wil trip Knox?
oMaRcO said:
Guys, If I flash this firmware via ondin, wil trip Knox?
Click to expand...
Click to collapse
No, Knox will not trip because this is signed firmware. (factory legit).
Related
think im just getting the 409.31mb download of 4.3 gonna take 20 mins.
just updating ,,updating locations known
I got it last night. Let us know if:
1) you find the response to the "on" button can be a bit slow
2) you manage to have any success getting ANT+ to work.
I was looking forward to ANT+ support based on comments on loads of websites but it doesn't appear to be there. thisisant.com pretty much confirmed that last night when I asked by email.
Lol mate that's just 4.3. Just checked Sammobile and 4.3 for UK is rolling out today.
Just to confirm I have just started downloading a 409.31 MB update too I'm in Cornwall UK:fingers-crossed:
edie209 said:
Just to confirm I have just started downloading a 409.31 MB update too I'm in Cornwall UK:fingers-crossed:
Click to expand...
Click to collapse
Downloading for me in West Sussex. If it makes any difference, my S3 is "unbranded" and I am on the three network.
UPDATE: Update Package downloaded, but "failed to install", so it's trying again and re-downloading the package!
Does this build also have the wake up delay bug like previous releases?
changelist is same but for china it is different:
Changelist in all builds except china: 1902166
Changelist for china:
Changelist: 1969761
Other info:
Build date: Mon, 04 Nov 2013 11:08:07 +0000
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
wajiman said:
changelist is same but for china it is different:
Changelist in all builds except china: 1902166
Changelist for china:
Changelist: 1969761
Other info:
Build date: Mon, 04 Nov 2013 11:08:07 +0000
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Click to expand...
Click to collapse
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
i dont think you should face any issue, but do make sure that your s3 is unbranded.
NOTE: Not gonna take any responsibility if you brick your phone
ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
You can install without any problem. The worst that could happen is that you have to install new modem or the build not supporting English (I Highly doubt it).
ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
yes :good: worry not
Still no joy for me - two downloads and two failed attempts to install new firmware, so it looks as though I am stuck on 4.1.2 for a bit longer. It says I can try again via Kies, rather than using the OTA method. Never used Kies before, but it doesn't look as thought I have much to lose.
Has the update worked ok for others?
Mod Edit
4.3 thread is HERE
No need for another.
Thread closed
malybru
Forum Moderator
http://www.sammobile.com/firmwares/
Sammobile have moved to terafile for hosting which sucks ass... anybody got a mirror for the BTU firmware?
jstockto2000 said:
Sammobile have moved to terafile for hosting which sucks ass... anybody got a mirror for the BTU firmware?
Click to expand...
Click to collapse
I Agree, terafile SUCKS. I'm also trying to download 4.3 BTU...
---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------
Could some one In the name of the lord, upload it to Mega ?
jstockto2000 said:
Sammobile have moved to terafile for hosting which sucks ass... anybody got a mirror for the BTU firmware?
Click to expand...
Click to collapse
BTU-N7100XXUEMK9-20131217145556.zip
Could some one In the name of the lord, upload it to Mega ?
---------- Post added at 09:58 AM ---------- Previous post was at 09:56 AM ----------
sora9009 said:
BTU-N7100XXUEMK9-20131217145556.zip
Click to expand...
Click to collapse
THANKS, Officially nominated to CyberHero of the Month...:laugh::good::good::good:
Can flash mk9 using mobile odin?
Are there any differences between the older official 4.3 firmwares? Must wait till tomorrow to flash the DBT
pcloud official 4.3 download link
INU-N7100XXUEMKD-20131216180812.zip
BTU-N7100XXUEMK9-20131217145556.zip
XEF-N7100XXUEMK8-20131217145110.zip
XEH-N7100XXUEMK9-20131217145946.zip
XEO-N7100XXUEMK9-20131217153653.zip
NEE-N7100XXUEMK9-20131217152945.zip
SIO-N7100XXUEMK9-20131217152201.zip
PHN-N7100XXUEMK9-20131217160220.zip
DBT-N7100XXUEMK9-20131217160006.zip
more link here
sora9009 said:
INU-N7100XXUEMKD-20131216180812.zip
BTU-N7100XXUEMK9-20131217145556.zip
XEF-N7100XXUEMK8-20131217145110.zip
XEH-N7100XXUEMK9-20131217145946.zip
XEO-N7100XXUEMK9-20131217153653.zip
NEE-N7100XXUEMK9-20131217152945.zip
SIO-N7100XXUEMK9-20131217152201.zip
PHN-N7100XXUEMK9-20131217160220.zip
DBT-N7100XXUEMK9-20131217160006.zip
Click to expand...
Click to collapse
which one is the latest one or which one has a higher build no ??? is it MK9 or MKD
cyrax2013 said:
which one is the latest one or which one has a higher build no ??? is it MK9 or MKD
Click to expand...
Click to collapse
Model: GT-N7100
Country: India
Version: Android 4.3
Changelist: 2203778
Build date: Wed, 27 Nov 2013 05:28:44 +0000
Product Code: INU
PDA: N7100XXUEMKD
CSC: N7100ODDEMK1
MODEM: N7100DDEMK1
Model: GT-N7100
Country: United Kingdom
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 10:22:31 +0000
Product Code: BTU
PDA: N7100XXUEMK9
CSC: N7100BTUEMK2
MODEM: N7100XXUEMJ9
sora9009 said:
Model: GT-N7100
Country: India
Version: Android 4.3
Changelist: 2203778
Build date: Wed, 27 Nov 2013 05:28:44 +0000
Product Code: INU
PDA: N7100XXUEMKD
CSC: N7100ODDEMK1
MODEM: N7100DDEMK1
Model: GT-N7100
Country: United Kingdom
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 10:22:31 +0000
Product Code: BTU
PDA: N7100XXUEMK9
CSC: N7100BTUEMK2
MODEM: N7100XXUEMJ9
Click to expand...
Click to collapse
Thanxx a lot....
moom999 said:
Can flash mk9 using mobile odin?
Click to expand...
Click to collapse
yes you can but you won't get the bootloader.mobile odin will not flash bootloader.
sora9009 said:
yes you can but you won't get the bootloader.mobile odin will not flash bootloader.
Click to expand...
Click to collapse
Do I need a new bootloader? Is it MJ5 bootloader that is the right one?
Sholud I flash the bootloader before or after i run the update in mobile odin?
chucken1 said:
Do I need a new bootloader? Is it MJ5 bootloader that is the right one?
Sholud I flash the bootloader before or after i run the update in mobile odin?
Click to expand...
Click to collapse
i don't know wether MJ5 bootloader is still compatible with the latest build or not..
sora9009 said:
i don't know wether MJ5 bootloader is still compatible with the latest build or not..
Click to expand...
Click to collapse
Mj5 is perfect with firmware mk9 and it's knox free if you take it from ditto n3 rom
sora9009 said:
i don't know wether MJ5 bootloader is still compatible with the latest build or not..
Click to expand...
Click to collapse
Will my old bootloader from 4.1.2 that i'm using now work?
chucken1 said:
Will my old bootloader from 4.1.2 that i'm using now work?
Click to expand...
Click to collapse
nope
@nat78mg has confirmed MJ5 bootloader still working
Model: GT-N7100
Country: United Kingdom
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 10:22:31 +0000
Product Code: BTU
PDA: N7100XXUEMK9
CSC: N7100BTUEMK2
MODEM: N7100XXUEMJ9
My international Note 2 was originally from France (I'm in the US). Any thoughts on whether I should I go with the 4.3 ROM for France, which seems like an earlier build, or the UK one?
I flashed mk3 hong kong already, can I flash this mk9 and will it trip knox?
Sent from my GT-N7100 using Tapatalk
unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
MeInQ8 said:
unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
Click to expand...
Click to collapse
Show up more infomation for help
What else?
Can anyone help?
MeInQ8 said:
What else?
Click to expand...
Click to collapse
itegypt said:
Can anyone help?
Click to expand...
Click to collapse
The latest available firmware for XSI is ENC2 (KitKat 4.4.2).
Go to Menu --> 'Firmware Browser...' to get the download link for this firmware, then flash it via Odin.
itegypt said:
Can anyone help?
Click to expand...
Click to collapse
Just download kitkat firmware n than flash manually by odin 3.07...ask google for how to update
This will work?
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVEND1
MODEM: N9005XXUENC2
why not?
MeInQ8 said:
unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
Click to expand...
Click to collapse
This will happen if ur device status is modified.
U can check it on download mode.
I post this somewhere but I forgot where
Happened to few of my friends owning note 3 export europe set (bought in singapore). But no big issue, since I can flash stock through odin.
MeInQ8 said:
This will work?
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVEND1
MODEM: N9005XXUENC2
Click to expand...
Click to collapse
Shld be no problem.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Thanks!
this is not the lateset kit kat
yesterday i received this firmware through kies so if you didnt flash your phone yet you may try this is its the latest released in 27/5/2014
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: XSI
PDA: N9005XXUEND3
CSC: N9005OJVENE1
MODEM: N9005XXUENC2
q8peace said:
yesterday i received this firmware through kies so if you didnt flash your phone yet you may try this is its the latest released in 27/5/2014
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: XSI
PDA: N9005XXUEND3
CSC: N9005OJVENE1
MODEM: N9005XXUENC2
Click to expand...
Click to collapse
This is newest :
Product Code: SIN
PDA: N9005DXUENE3
CSC: N9005OLCENE4
MODEM: N9005DXUENE2
Since he will flash through odin, might as well get the latest.
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
This is newest :
Product Code: SIN
PDA: N9005DXUENE3
CSC: N9005OLCENE4
MODEM: N9005DXUENE2
Since he will flash through odin, might as well get the latest.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
he have the note 3 with xsi not sin
Firmware OTA updates depends on region. Like in US it 1st releases and after few time in other countries one by one due to localization. Also it depends on career those have taken locked version under contract, like Verizon released the 4.4 in May where I got it many month back, even another latest firmware update recently.
So check google news, for your region or check other phones in your region. If they provides you will definitely get it. If others got it then contact Samsung.
q8peace said:
he have the note 3 with xsi not sin
Click to expand...
Click to collapse
I know. But shld not be a problem mate.
Mine is BTU. I flashed so many region alrd : DBT, XSI, SIN and BTU itself.
All run well.
Since I m flashing with odin, I don't really care abt region.
Worst case (if happen, so far never), just flash csc of ur own region.
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
I know. But shld not be a problem mate.
Mine is BTU. I flashed so many region alrd : DBT, XSI, SIN and BTU itself.
All run well.
Since I m flashing with odin, I don't really care abt region.
Worst case (if happen, so far never), just flash csc of ur own region.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
but its socks when you wipe everything in your phone before flashing to get stable firmware so flashing ota or kies seems not wiped the phone
q8peace said:
but its socks when you wipe everything in your phone before flashing to get stable firmware so flashing ota or kies seems not wiped the phone
Click to expand...
Click to collapse
Yes mate. Pain in the ass when u wipe to clean.
OTA got bad habit. Happened. To 2 of my friends already. They do OTA, enjoying it with data still intact. One day, all of sudden phone freeze, reboot, auto wipe. Puff, all gone.
Another one more also same. Freeze, never reboot auto, just stay freezing, phone very hot, unplug battery, boot and stuck at Samsung logo. Finally factory reset as well. Both can't save their data.
This happened. To my friends who do OTA from 4.3 to 4.4.2 but dun want to wipe.
Sent from somewhere under the sky, at the corner of this rounded earth.
Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Zam1000 said:
Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Click to expand...
Click to collapse
You can check HERE
Zam1000 said:
Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Click to expand...
Click to collapse
Here you go
http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=NEE#firmware
Edit: And yeah, that one seems to be the latest.
CarlM34 said:
You can check HERE
Click to expand...
Click to collapse
That's where I looked.
But I was not sure which one is right.
Sweden - VDS
or
Sweden - 3 is not the one I should have.
or
Nordic countries - NEE.
I think it's the last thing that is right.
Thanks for your time!
Next question!
I want to get rid of everything that existed on the device and start from scratch.
Is there some kind of formatting that removes just about everything and it may be that from the factory?
After I flash the stock ROM it wont turn wifi on. its been stopped by knox!??
Why and how to fix?
Zam1000 said:
After I flash the stock ROM it wont turn wifi on. its been stopped by knox!??
Why and how to fix?
Click to expand...
Click to collapse
Flash 2nd time the same stock rom for avoid WIFI problem.
Joku1981 said:
Flash 2nd time the same stock rom for avoid WIFI problem.
Click to expand...
Click to collapse
Ok. I try to see if that works!
Model: GT-N7100
Model name: GALAXY Note II
Country: Netherlands (T-Mobile)
Version: Android 4.4.2
Changelist: 1600010
Build date: Mon, 12 May 2014 01:22:06 +0000
Product Code: TNL
PDA: N7100XXUFNE2
CSC: N7100TNLFNE1
MODEM: N7100XXUFND3
Download-> https://mega.co.nz/#!TYZwwSbQ!avdenTXAoOiAJLjCioeLtif0MpchdzdgFgnNsgPfgeY
Hi mate
Do you have a Custom ROM created of this firmware?
Taxi341 said:
Hi mate
Do you have a Custom ROM created of this firmware?
Click to expand...
Click to collapse
I would love to work on it, but i have upgraded my bootloader.
I was informed that root was possible in this thread: http://forum.xda-developers.com/showthread.php?t=2746829
I upgraded my bootloader and was ready to use the "root metod" but fond out it will not work on NE1 bootloader and newer.
So i can not do any good work without root access.
Maybe the towelroot will be updated and working for n7100 (or anyone come up with a working codestring)
I will not tripp knox warranty, second hand price will propp and i have 1 year left on my warranty.
is the WiFi Password Amnesia fixed?