4.3 downloading now uk LONDON - Galaxy S III General

think im just getting the 409.31mb download of 4.3 gonna take 20 mins.
just updating ,,updating locations known

I got it last night. Let us know if:
1) you find the response to the "on" button can be a bit slow
2) you manage to have any success getting ANT+ to work.
I was looking forward to ANT+ support based on comments on loads of websites but it doesn't appear to be there. thisisant.com pretty much confirmed that last night when I asked by email.

Lol mate that's just 4.3. Just checked Sammobile and 4.3 for UK is rolling out today.

Just to confirm I have just started downloading a 409.31 MB update too I'm in Cornwall UK:fingers-crossed:

edie209 said:
Just to confirm I have just started downloading a 409.31 MB update too I'm in Cornwall UK:fingers-crossed:
Click to expand...
Click to collapse
Downloading for me in West Sussex. If it makes any difference, my S3 is "unbranded" and I am on the three network.
UPDATE: Update Package downloaded, but "failed to install", so it's trying again and re-downloading the package!

Does this build also have the wake up delay bug like previous releases?

changelist is same but for china it is different:
Changelist in all builds except china: 1902166
Changelist for china:
Changelist: 1969761
Other info:
Build date: Mon, 04 Nov 2013 11:08:07 +0000
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2

wajiman said:
changelist is same but for china it is different:
Changelist in all builds except china: 1902166
Changelist for china:
Changelist: 1969761
Other info:
Build date: Mon, 04 Nov 2013 11:08:07 +0000
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Product Code: CHN
PDA: I9300ZCUBMK2
CSC: I9300CHNBMK2
MODEM: I9300ZCBMK2
Click to expand...
Click to collapse
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?

ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
i dont think you should face any issue, but do make sure that your s3 is unbranded.
NOTE: Not gonna take any responsibility if you brick your phone

ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
You can install without any problem. The worst that could happen is that you have to install new modem or the build not supporting English (I Highly doubt it).

ash1684 said:
Is that China build for any GT-I9300? I mean: can we install it in Europe without any problem?
Click to expand...
Click to collapse
yes :good: worry not

Still no joy for me - two downloads and two failed attempts to install new firmware, so it looks as though I am stuck on 4.1.2 for a bit longer. It says I can try again via Kies, rather than using the OTA method. Never used Kies before, but it doesn't look as thought I have much to lose.
Has the update worked ok for others?

Mod Edit
4.3 thread is HERE
No need for another.
Thread closed
malybru
Forum Moderator

Related

Hotfile shutdown. Sharing other links to download stock firmwares.

As we all knew hotfile has been shutdown, and all stock firmwares from sammobile also gone. So until they done uploading the firmwares to Terafile.co, we can share them here..
I got a couple of 4.3 firmware from pcloud:
Model: GT-N7100
Country: Hong Kong
Version: Android 4.3
Changelist: 2139372
Build date: Fri, 15 Nov 2013 09:36:04 +0000
Product Code: TGY
PDA: N7100ZSUEMK3
CSC: N7100OZSEMK3
MODEM: N7100ZSEMK3
Download link: https://my.pcloud.com/#page=publink&code=XZccuZvEs2UU0JYXpX84c82KXn18x6q3iX
Model: GT-N7100
Country: Trinidad and Tobago
Version: Android 4.3
Changelist: 2107855
Build date: Mon, 11 Nov 2013 15:52:44 +0000
Product Code: TTT
PDA: N7100UBUEMK2
CSC: N7100UUBEMK2
MODEM: N7100UBUEMJ4
Download link: https://my.pcloud.com/#page=publink&code=XZLSfZx6TuTsVtxfB0aNzhHc0Hr7MTCaRX
I will try to upload other firmwares that I have later today...will appreciate if others share them here too.
Model: GT-N7100
Country: Malaysia
Version: Android 4.1.2
Changelist: 1071214
Build date: Fri, 07 Jun 2013 01:51:48 +0000
Product Code: XME
PDA: N7100XXDMF2
CSC: N7100OLBDMD2
MODEM: N7100DXDMF1
Download
stonedead said:
As we all knew hotfile has been shutdown, and all stock firmwares from sammobile also gone. So until they done uploading the firmwares to Terafile.co, we can share them here..
I got a couple of 4.3 firmware from pcloud:
Model: GT-N7100
Country: Hong Kong
Version: Android 4.3
Changelist: 2139372
Build date: Fri, 15 Nov 2013 09:36:04 +0000
Product Code: TGY
PDA: N7100ZSUEMK3
CSC: N7100OZSEMK3
MODEM: N7100ZSEMK3
Download link: https://my.pcloud.com/#page=publink&code=XZccuZvEs2UU0JYXpX84c82KXn18x6q3iX
Model: GT-N7100
Country: Trinidad and Tobago
Version: Android 4.3
Changelist: 2107855
Build date: Mon, 11 Nov 2013 15:52:44 +0000
Product Code: TTT
PDA: N7100UBUEMK2
CSC: N7100UUBEMK2
MODEM: N7100UBUEMJ4
Download link: https://my.pcloud.com/#page=publink&code=XZLSfZx6TuTsVtxfB0aNzhHc0Hr7MTCaRX
I will try to upload other firmwares that I have later today...will appreciate if others share them here too.
Click to expand...
Click to collapse
:good:Thank you very very very muchhhhh:good:
any chance for anyone have This Firmware thanks
PDA: N7100XXDME6
CSC: N7100OXXDMF1
MODEM: N7100XXDMF1 BTU
turborider said:
any chance for anyone have This Firmware thanks
PDA: N7100XXDME6
CSC: N7100OXXDMF1
MODEM: N7100XXDMF1 BTU
Click to expand...
Click to collapse
google and found this
BTU-N7100XXDME6-20130603102621.zip
sora9009 said:
google and found this
BTU-N7100XXDME6-20130603102621.zip
Click to expand...
Click to collapse
ty mate but is
BTU PDA: N7100XXDME6 CSC: N7100OXXDME2 MODEM: N7100XXDME4
So to make this a whole lot easier sammobile.com and samsung-updates.com are changing there file hosting to some other different file hosting service. All most all firmwares have been re-uploaded. Cheers
Sent from my GT-N7100 using XDA Premium 4 mobile app
Shees, all those file share websites with a snail speed don't allow downloading any files over 1G without signing up for a paid plan.
Why not just use bittorrent? There ought to be enough users for that to work. Or dropbox. But perhaps the websites don't earn any kickback from that.
Tried the HK version in the OP, but it fails crc test during install ....
Indian version is not up yet.
N7100XXUEMK4_N7100ODDEMK1_INU.zip
https://my.pcloud.com/#page=publink&code=XZgNbZ7LbDOe1tzoVHBeQ4mMeIF8bHX1CX
what is the MD5 checksum for malaysia stock rom?

[Q] Need advise about flashing an older ROM for my Note3

Good day guys! I'm new here at XDA, and with all this csc, rooting and flashing of roms thing and I just wanted to ask something about it.
I recently bought my friend's note 3 which originally had the Malaysian Rom (XME).. but before he sold the phone to me, he told me that he had updated/flashed the Singaporean Rom (MM1) on the phone.. I just wanted to ask, is it still possible to go back to the original XME Rom even though he had already flashed a newer MM1 Rom?? Would the phone still work as it should be with no problems/issues?? I hope someone could help me on this.. Many thanks guys!
(Original Rom that came with the phone)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDMJ2
MODEM: N9005XXUDMJ7
(Current Rom that is on the phone)
Model: SM-N9005
Country: Singapore
Version: Android 4.3
Changelist: 2019540
Build date: Tue, 10 Dec 2013 06:06:06 +0000
Product Code: MM1
PDA: N9005XXUDML2
CSC: N9005OLBDMK2
MODEM: N9005XXUDMJ7
Thank you in advance!
chiebai_13 said:
Good day guys! I'm new here at XDA, and with all this csc, rooting and flashing of roms thing and I just wanted to ask something about it.
I recently bought my friend's note 3 which originally had the Malaysian Rom (XME).. but before he sold the phone to me, he told me that he had updated/flashed the Singaporean Rom (MM1) on the phone.. I just wanted to ask, is it still possible to go back to the original XME Rom even though he had already flashed a newer MM1 Rom?? Would the phone still work as it should be with no problems/issues?? I hope someone could help me on this.. Many thanks guys!
(Original Rom that came with the phone)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDMJ2
MODEM: N9005XXUDMJ7
(Current Rom that is on the phone)
Model: SM-N9005
Country: Singapore
Version: Android 4.3
Changelist: 2019540
Build date: Tue, 10 Dec 2013 06:06:06 +0000
Product Code: MM1
PDA: N9005XXUDML2
CSC: N9005OLBDMK2
MODEM: N9005XXUDMJ7
Thank you in advance!
Click to expand...
Click to collapse
no you cant downgrade you can only flash the same or higher
jaythenut said:
no you cant downgrade you can only flash the same or higher
Click to expand...
Click to collapse
Thank you so much for answering my question! Happy new year! :good:
chiebai_13 said:
Good day guys! I'm new here at XDA, and with all this csc, rooting and flashing of roms thing and I just wanted to ask something about it.
I recently bought my friend's note 3 which originally had the Malaysian Rom (XME).. but before he sold the phone to me, he told me that he had updated/flashed the Singaporean Rom (MM1) on the phone.. I just wanted to ask, is it still possible to go back to the original XME Rom even though he had already flashed a newer MM1 Rom?? Would the phone still work as it should be with no problems/issues?? I hope someone could help me on this.. Many thanks guys!
(Original Rom that came with the phone)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDMJ2
MODEM: N9005XXUDMJ7
(Current Rom that is on the phone)
Model: SM-N9005
Country: Singapore
Version: Android 4.3
Changelist: 2019540
Build date: Tue, 10 Dec 2013 06:06:06 +0000
Product Code: MM1
PDA: N9005XXUDML2
CSC: N9005OLBDMK2
MODEM: N9005XXUDMJ7
Thank you in advance!
Click to expand...
Click to collapse
You can try but if it starts looping reflashing the Singaporean rom should fix it.
Boot-looping just means it has a newer bootloader in this case. If possible I would suggest to make a backup of your EFS folder.
ultramag69 said:
You can try but if it starts looping reflashing the Singaporean rom should fix it.
Boot-looping just means it has a newer bootloader in this case. If possible I would suggest to make a backup of your EFS folder.
Click to expand...
Click to collapse
Thanks for the info mate! I'm now actually tempted to try what you have just said, but i worry about the backing up and restoring of EFS part.. It sounds hard and complicated. I think I'll just wait for an updated Malaysian Rom (XME) and then flash that one.. just to be on the safe side.. Cheers!
May i ask what happens if you try to downgrade to an old firmware?
You'll bootloop because the bootloader won't be able to boot it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downgrading will trip knox as well, right?
MariosFFX said:
Downgrading will trip knox as well, right?
Click to expand...
Click to collapse
Apparently so, has to do with trying to get around the secure bootloader
chiebai_13 said:
Good day guys! I'm new here at XDA, and with all this csc, rooting and flashing of roms thing and I just wanted to ask something about it.
I recently bought my friend's note 3 which originally had the Malaysian Rom (XME).. but before he sold the phone to me, he told me that he had updated/flashed the Singaporean Rom (MM1) on the phone.. I just wanted to ask, is it still possible to go back to the original XME Rom even though he had already flashed a newer MM1 Rom?? Would the phone still work as it should be with no problems/issues?? I hope someone could help me on this.. Many thanks guys!
(Original Rom that came with the phone)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDMJ2
MODEM: N9005XXUDMJ7
(Current Rom that is on the phone)
Model: SM-N9005
Country: Singapore
Version: Android 4.3
Changelist: 2019540
Build date: Tue, 10 Dec 2013 06:06:06 +0000
Product Code: MM1
PDA: N9005XXUDML2
CSC: N9005OLBDMK2
MODEM: N9005XXUDMJ7
Thank you in advance!
Click to expand...
Click to collapse
if your phone has been rooted AND if your friend had flashed the Singaporean Rom by using Mobile Odin Pro, you can fallback to the older firmware. Because the old bootloader was preserved by Mobile Odin Pro.
So ask your friend which tool he had used to flash the firmware.
BTW, why do you want to fallback to the older firmware? May be you notice some differences between XME and MM1 roms?
vndnguyen said:
if your phone has been rooted AND if your friend had flashed the Singaporean Rom by using Mobile Odin Pro, you can fallback to the older firmware. Because the old bootloader was preserved by Mobile Odin Pro.
So ask your friend which tool he had used to flash the firmware.
BTW, why do you want to fallback to the older firmware? May be you notice some differences between XME and MM1 roms?
Click to expand...
Click to collapse
Hi..he said he never rooted the phone, he just flashed the MM1 rom because he wanted a newer rom on the phone. To be honest, I don't really know why I want to go back to the XME rom.. maybe because that was the original rom that the phone came with and I want the phone to be in it's original state again?
Plus.. when I connect to Kies, it says something about my phone not being supported for firmware updates.. and my csc is still XME and not MM1 which is the Singaporean Rom. I guess I just want my phone to go back to XME so that I can use firmware update on Kies..
Ok so you need to wait until XME has at least ML2 version and flash. No other choice.
IMO, from the point of usage, there is no major difference between XME and MM1 release. Btw, MM1 always has the newest firmware than XME.
Sent from my SM-N9005 using Tapatalk
vndnguyen said:
Ok so you need to wait until XME has at least ML2 version and flash. No other choice.
IMO, from the point of usage, there is no major difference between XME and MM1 release. Btw, MM1 always has the newest firmware than XME.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
"Ok so you need to wait until XME has at least ML2 version and flash. No other choice"
Yeah and that's what I did (I think).. luckily last night a newer XME Rom came out and I flashed it on my note3.. seems to be working fine and all my files are still on my phone! Thanks to everyone who commented on my very first thread, I learned a lot from you guys!! Cheers!!
(This is the one that I flashed last night)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDML1
MODEM: N9005XXUDMJ7
chiebai_13 said:
"Ok so you need to wait until XME has at least ML2 version and flash. No other choice"
Yeah and that's what I did (I think).. luckily last night a newer XME Rom came out and I flashed it on my note3.. seems to be working fine and all my files are still on my phone! Thanks to everyone who commented on my very first thread, I learned a lot from you guys!! Cheers!!
(This is the one that I flashed last night)
Model: SM-N9005
Country: Malaysia
Version: Android 4.3
Changelist: 2019540
Build date: Wed, 30 Oct 2013 07:58:12 +0000
Product Code: XME
PDA: N9005XXUDMJ7
CSC: N9005OLBDML1
MODEM: N9005XXUDMJ7
Click to expand...
Click to collapse
You can flash MJ7 over the ML2? Sounds very strange... because MJ7 is older than ML2
Sent from my SM-N9005 using Tapatalk
vndnguyen said:
You can flash MJ7 over the ML2? Sounds very strange... because MJ7 is older than ML2
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
MK/ML can downgrade to MJ7 - for whatever reason Samsung allowed it, assume it is because they closed whatever security loop and have deemed MJ7 the safest bootloader to fall back to.
radicalisto said:
MK/ML can downgrade to MJ7 - for whatever reason Samsung allowed it, assume it is because they closed whatever security loop and have deemed MJ7 the safest bootloader to fall back to.
Click to expand...
Click to collapse
Really? Nice to hear that!
vndnguyen said:
Really? Nice to hear that!
Click to expand...
Click to collapse
Yeah I've flashed back to MJ7 without issues a couple of times now.
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
Yeah I've flashed back to MJ7 without issues a couple of times now.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so i can flash 02uk mj7 over btu mk2 without any issues?
the battery drain on mk2 btu is horrible, and im guessin 02 wouldnt release firmware without testing it properly
By the way, I was able to flash XSI Mj7 over SER MK2. I did it by wiping system partition in TWRP, after which flashing went through with no issue
Sent from my SM-N9005 using Tapatalk
vndnguyen said:
You can flash MJ7 over the ML2? Sounds very strange... because MJ7 is older than ML2
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah I was able to do it.. no wipe, no factory reset.. I just flashed it with odin, and all my files/settings are still there! Some people commented here that it was not possible but for some reason it worked.. I just thought that if I encounter any bootloops I'll just flash the MM1 Rom again.. luckily I didn't have to. :laugh:

Not rooted but still no kitkat update?

unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
MeInQ8 said:
unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
Click to expand...
Click to collapse
Show up more infomation for help
What else?
Can anyone help?
MeInQ8 said:
What else?
Click to expand...
Click to collapse
itegypt said:
Can anyone help?
Click to expand...
Click to collapse
The latest available firmware for XSI is ENC2 (KitKat 4.4.2).
Go to Menu --> 'Firmware Browser...' to get the download link for this firmware, then flash it via Odin.
itegypt said:
Can anyone help?
Click to expand...
Click to collapse
Just download kitkat firmware n than flash manually by odin 3.07...ask google for how to update
This will work?
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVEND1
MODEM: N9005XXUENC2
why not?
MeInQ8 said:
unlocked gn3 running stock 4.3 and still no OTA update yet?
Ideas
Click to expand...
Click to collapse
This will happen if ur device status is modified.
U can check it on download mode.
I post this somewhere but I forgot where
Happened to few of my friends owning note 3 export europe set (bought in singapore). But no big issue, since I can flash stock through odin.
MeInQ8 said:
This will work?
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 636608
Build date: Tue, 04 Mar 2014 04:48:22 +0000
Product Code: XSI
PDA: N9005XXUENC2
CSC: N9005OJVEND1
MODEM: N9005XXUENC2
Click to expand...
Click to collapse
Shld be no problem.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Thanks!
this is not the lateset kit kat
yesterday i received this firmware through kies so if you didnt flash your phone yet you may try this is its the latest released in 27/5/2014
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: XSI
PDA: N9005XXUEND3
CSC: N9005OJVENE1
MODEM: N9005XXUENC2
q8peace said:
yesterday i received this firmware through kies so if you didnt flash your phone yet you may try this is its the latest released in 27/5/2014
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: XSI
PDA: N9005XXUEND3
CSC: N9005OJVENE1
MODEM: N9005XXUENC2
Click to expand...
Click to collapse
This is newest :
Product Code: SIN
PDA: N9005DXUENE3
CSC: N9005OLCENE4
MODEM: N9005DXUENE2
Since he will flash through odin, might as well get the latest.
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
This is newest :
Product Code: SIN
PDA: N9005DXUENE3
CSC: N9005OLCENE4
MODEM: N9005DXUENE2
Since he will flash through odin, might as well get the latest.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
he have the note 3 with xsi not sin
Firmware OTA updates depends on region. Like in US it 1st releases and after few time in other countries one by one due to localization. Also it depends on career those have taken locked version under contract, like Verizon released the 4.4 in May where I got it many month back, even another latest firmware update recently.
So check google news, for your region or check other phones in your region. If they provides you will definitely get it. If others got it then contact Samsung.
q8peace said:
he have the note 3 with xsi not sin
Click to expand...
Click to collapse
I know. But shld not be a problem mate.
Mine is BTU. I flashed so many region alrd : DBT, XSI, SIN and BTU itself.
All run well.
Since I m flashing with odin, I don't really care abt region.
Worst case (if happen, so far never), just flash csc of ur own region.
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
I know. But shld not be a problem mate.
Mine is BTU. I flashed so many region alrd : DBT, XSI, SIN and BTU itself.
All run well.
Since I m flashing with odin, I don't really care abt region.
Worst case (if happen, so far never), just flash csc of ur own region.
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
but its socks when you wipe everything in your phone before flashing to get stable firmware so flashing ota or kies seems not wiped the phone
q8peace said:
but its socks when you wipe everything in your phone before flashing to get stable firmware so flashing ota or kies seems not wiped the phone
Click to expand...
Click to collapse
Yes mate. Pain in the ass when u wipe to clean.
OTA got bad habit. Happened. To 2 of my friends already. They do OTA, enjoying it with data still intact. One day, all of sudden phone freeze, reboot, auto wipe. Puff, all gone.
Another one more also same. Freeze, never reboot auto, just stay freezing, phone very hot, unplug battery, boot and stuck at Samsung logo. Finally factory reset as well. Both can't save their data.
This happened. To my friends who do OTA from 4.3 to 4.4.2 but dun want to wipe.
Sent from somewhere under the sky, at the corner of this rounded earth.

Stock ROM GT-I9505 Sweden

Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Zam1000 said:
Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Click to expand...
Click to collapse
You can check HERE
Zam1000 said:
Hi.
What is the latest samsung official stock ROM for this device? (sweden)
Maybe I'm a fool, but I have been looking and can not find which version is the latest that Samsung released.
Regards
Update:
Is it this?
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: Nordic countries
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: NEE
PDA: I9505XXUFNB9
CSC: I9505NEEFNB2
MODEM: I9505XXUFNB9
Click to expand...
Click to collapse
Here you go
http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=NEE#firmware
Edit: And yeah, that one seems to be the latest.
CarlM34 said:
You can check HERE
Click to expand...
Click to collapse
That's where I looked.
But I was not sure which one is right.
Sweden - VDS
or
Sweden - 3 is not the one I should have.
or
Nordic countries - NEE.
I think it's the last thing that is right.
Thanks for your time!
Next question!
I want to get rid of everything that existed on the device and start from scratch.
Is there some kind of formatting that removes just about everything and it may be that from the factory?
After I flash the stock ROM it wont turn wifi on. its been stopped by knox!??
Why and how to fix?
Zam1000 said:
After I flash the stock ROM it wont turn wifi on. its been stopped by knox!??
Why and how to fix?
Click to expand...
Click to collapse
Flash 2nd time the same stock rom for avoid WIFI problem.
Joku1981 said:
Flash 2nd time the same stock rom for avoid WIFI problem.
Click to expand...
Click to collapse
Ok. I try to see if that works!

SM-P600 4.4.2 - Spain P600XXUCNH3

Model: SM-P600
Model name: GALAXY Note 10.1 Wi-Fi 2014 Edition
Country: Spain
Version: Android 4.4.2
Changelist: 2612580
Build date: Tue, 26 Aug 2014 09:23:15 +0000
Product Code: PHE
PDA: P600XXUCNH3
CSC: P600OXACNH3
MODEM: P600XXUCNH3
http://www.sammobile.com/firmwares/3/?download=35072
New Firmware - Europe
tap007 said:
Model: SM-P600
Model name: GALAXY Note 10.1 Wi-Fi 2014 Edition
Country: Spain
Version: Android 4.4.2
Changelist: 2612580
Build date: Tue, 26 Aug 2014 09:23:15 +0000
Product Code: PHE
PDA: P600XXUCNH3
CSC: P600OXACNH3
MODEM: P600XXUCNH3
http://www.sammobile.com/firmwares/3/?download=35072
Click to expand...
Click to collapse
At last some new firmaware for Europe - SM-P600! :good:
Can someone spot any changes to the old firmware from Spain?
Regards.
Is anyone experiencing the same problem with 5ghz wifi that others have had with the new firmware from Taiwan?
Ah good news!It seems that his tablet hasn't been abandoned!I only hope that this version will rollout in the other european country..
Giulio_tami said:
Ah good news!It seems that his tablet hasn't been abandoned!I only hope that this version will rollout in the other european country..
Click to expand...
Click to collapse
I've installed this, tablet working ok - too early to comment on changes.
It is rather sad and disappointing that there's still no official update for UK bought P600's ... a big samsung failure IMO
---------- Post added at 01:41 PM ---------- Previous post was at 01:29 PM ----------
egps2 said:
Is anyone experiencing the same problem with 5ghz wifi that others have had with the new firmware from Taiwan?
Click to expand...
Click to collapse
I've not followed the discussion as such, nor did I try the Taiwan firmware, however I have just verified I am connected via 5 Ghz (at work) just fine
The tablet was originally installed on android 4.3 UK, BTU. I've since flashed the initial spain 4.4.2, then this new one. I didn't reset at any point, so the CSC is still showing as BTU. It's possible an asian CSC (or anything outside europe) may result in different wireless availability due to rules over what channels are allowed in what countries, and I suspect this data is all part of the CSC definition
If that is the case, proper wifi may only come back with a hard reset/CSC switch. I'm no expert though it's just a hunch...
The same built is now out on Switzerland (AUT) too!!:good:
Guys, If I flash this firmware via ondin, wil trip Knox?
oMaRcO said:
Guys, If I flash this firmware via ondin, wil trip Knox?
Click to expand...
Click to collapse
No, Knox will not trip because this is signed firmware. (factory legit).

Categories

Resources