Database Users

CWM 5.5.0.4 and 5.8.31

what is the difference between CWM 5.5.0.4 and 5.8.3.1. Why ROM manager installed CWM 5.8.3.1 in Galaxy Tab P7500 while taking backup, though CWM 5.5.04 was already installed using ODIN I.85. Is it necessary to re install CWM 5.5.0.4. If so, how to re install CWM 5.5.0.4. My galaxy TAB P7500 is running on stock ICS 4.04.

Only a few changes are made(you can't even say where)from 5.5.0.4 to 5.8.3.1...
The ROMmanager must make sure that the CWM on your device matches with the version of the APP,but upgrading does no harm i.e. it's no need to reinstall CWM...
Beware!don't go into CWM if you are on the stock ICS because it has the rolling screen issue,flash all you need with ROMmanager,don't install CWM touch when you are using stock ICS(it'll be a waste of time,mony,etc)
If you want to get out of CWM(5.5.0.4) after flashing but get confused with the rolling screen just do thisress vol down and then press the power button twice...the tab restarts with all the changes you've made...
And finally:feel free to ask questions,XDA in always here to help you!

arashtarafar said:
Only a few changes are made(you can't even say where)from 5.5.0.4 to 5.8.3.1...
The ROMmanager must make sure that the CWM on your device matches with the version of the APP,but upgrading does no harm i.e. it's no need to reinstall CWM...
Beware!don't go into CWM if you are on the stock ICS because it has the rolling screen issue,flash all you need with ROMmanager,don't install CWM touch when you are using stock ICS(it'll be a waste of time,mony,etc)
If you want to get out of CWM(5.5.0.4) after flashing but get confused with the rolling screen just do thisress vol down and then press the power button twice...the tab restarts with all the changes you've made...
And finally:feel free to ask questions,XDA in always here to help you!
Click to expand...
Click to collapse
I'm using CWM 5.5.0.4 here with stock ICS. No problems at all.
5.5.0.4 is the version recommended to prevent rolling recovery.

I also followed pershoot's advice in the 2.6.36.4 thread. I did get the rolling recovery even with 5.5.0.4.
I am on stock US ICS and odined the following:
(1) US ICS 4.0.4 BL variant
(2) Recommended recovery (CWM non touch 6.0.1.2)
Now I have no flicker in the recovery or the ROM like I had experienced in the past. However, I'm rather way of CWM 6.0.1.2 because I used the previous non-touch (6.0.1.1 I think) and wasn't able to restore a Nandroid...it just hung on me. Where did you get the 5.5.0.4 that worked with stock ICS ROM/BL Jack?

Hi dj.
Can't remember now where I got 5504, read so many guides.
I have it in my drop box.
I'll post the link for it shortly.

Really

djmatt604 said:
I also followed pershoot's advice in the 2.6.36.4 thread. I did get the rolling recovery even with 5.5.0.4.
I am on stock US ICS and odined the following:
(1) US ICS 4.0.4 BL variant
(2) Recommended recovery (CWM non touch 6.0.1.2)
Now I have no flicker in the recovery or the ROM like I had experienced in the past. However, I'm rather way of CWM 6.0.1.2 because I used the previous non-touch (6.0.1.1 I think) and wasn't able to restore a Nandroid...it just hung on me. Where did you get the 5.5.0.4 that worked with stock ICS ROM/BL Jack?
Click to expand...
Click to collapse
Here ya go dj
https://dl.dropbox.com/u/99900479/recovery.tar.zip

You're the man! I may go back to stock firmware just to give this a go. Thanks!!

djmatt604 said:
You're the man! I may go back to stock firmware just to give this a go. Thanks!!
Click to expand...
Click to collapse
You're welcome.
Good luck.

Thank you for your nice advice and assurance. Sir I have another question/doubt. Please clarify
I am having P7500 in India. I flashed Italian stock rom 4.04 using ODIN. Later rooted the Tab using CWM 5.5.4 method. subsequently I installed ROM Manager. I did back up. It appears that CWM version was changed by ROM manager. Now I want to flash Indian stock rom 4.04 recently released and also rooting. Please suggest a mode.

Download the stock IN firmware from Sammobile and flash in Odin with PDA with your tablet in download mode. You will lose everything on your internal storage so if you want to keep your backups make sure to move them off the tablet before you flash.
You'll find lots of guides in the Q&A and Dev sections that will provide root methods for your 4.0.4 stock firmware. Or, you can skip all of this and just flash a rooted ICS ROM with a full wipe to save yourself the steps. It's really up to you.

Thank you Sir for your valuable advice.
Please clarify, If I flash INU stock ROM 4.04 on ITLY stock ROM 4.04, using ODIN, will it wipe out applications data also?
Earlier When I flashed ITLY stock ROM 4.04 on my original stock ROM 3.2 INU on my galaxy tab p7500 using ODIN, it did not wipe out any data from internal storage and all the applications were automatically installed after reboot..

It may, it may not...it depends on whether or not you boot up after the flash without issues. If you get stuck on the Samsung logo or a boot loop, you will need to boot into stock Android recovery and do a factory reset, that would format your /data partition and result in loss of apps etc.
That Thanks button works well if I have helped you makes me look like less of a noob! Good luck to you

djmatt604 said:
It may, it may not...it depends on whether or not you boot up after the flash without issues. If you get stuck on the Samsung logo or a boot loop, you will need to boot into stock Android recovery and do a factory reset, that would format your /data partition and result in loss of apps etc.
That Thanks button works well if I have helped you makes me look like less of a noob! Good luck to you
Click to expand...
Click to collapse
I recommend doing a full wipe with CWM recovery before flashing with ODIN. Doing that avoids having to do a full wipe with Stock recovery which wipes the internal. Wiping before flash should avoids formatted internal. Would others confirm, this is what I have noticed on my tab.

Need help installing CWM

Okay so i'm not new to flashing just made a stupd mistake, i have a Bell i9000M and installed CM9.1 and everything went fine and then installed the S3 addon pack that caused a bootloop so went into recovery and flashed back my nandroid here is where i made the mistake and restored back to GB and caused all sorts of problems but long story short I am now 100% stock running GB 2.3.3 and for the life of me cannot get CWM recovery on the phone.
Everytime i install a kernal it bootloops and looks like I can't even get into stock recovery now. I used odin and flashed PDA,CSC,PHONE and tried using 512 pit file.
The phone works just can't get recovery to work or even install a custom kernal like hardcore speedmod.
Tried follow the CM wiki and no luck, that just causes a bootloop on the startup screen.
Firmware:
GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl

jebise101 said:
Firmware:GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl
Click to expand...
Click to collapse
you need root, use UGKG3 rooting kernel from My Android Collections

Thanks, I was able to get back to CM9 and finially installed the correct NANDROID using this, which is for my device

urgent! stuck on splash!

hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!

Hi,
is there a Odin Version of the Rom you tried to flash? If yes, you could simply bring your device to download-mode and flash the Rom with Odin.
Alternatively search for a odin flashable Recovery and flash this first. Then you could boot to recovery and flash the zip of the Rom.
Sent from my GT-I9505 using xda app-developers app

i tried installing the liquid smooth rom, and from what i can see there is no odin version of the rom :\
Are you able to direct me to an Odin flashable recovery I can use?
im really stressing out about this
i'm in the process of downloading a stock firmware and will try to flash it on, but it's taking forever to download

I don't see why you can't boot again if you have only wiped the user data and cache, just press the home button for 10 seconds and see if it restarts with your reset stock firmware. Otherwise you can reboot into recovery and do the wipes again (not the option to install a new ROM), or put the ROM zip you want to flash on an SD card and then flash from the SD.
I hope this helps.

suwidji said:
hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Click to expand...
Click to collapse
You should of made a backup with CWM. That's what it's used for also, besides flashing .zips. Always make a backup that you can restore and keep an extra copy on ur computer and/or a usb drive.

You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.

when i first did the wipe, i chose the option that i was going to install a new ROM. I'm now assuming that's where i made a mistake.
I did make a backup before i wiped everything onto my SD card, but now i can't even access that backup because it's saying there's nothing.
I've tried flashing a ROM onto it, but it says aborted.

Yes SORF ist right. It should boot into resetted stock firmware.
First try to copy the Rom to SD and then boot to recovery an try flashing it.
If booting to recovery doesn't work (but it should work if you just wiped user data and cache) you should try flashing new recovery with odin.
You could use Philz recovery for GT-I9505 from here http://forum.xda-developers.com/showthread.php?t=2281367
Installation Instructions for installation with odin you find here http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4

windozeanti said:
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
Click to expand...
Click to collapse
Thanks, that's what I'm doing right now, but the file is about 1.8GB and taking so long to download...
i wish there was a faster server, but this is the only option i could find :\

Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.

j0ch3 said:
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
Click to expand...
Click to collapse
yes i have tried that, and it says that install aborts.
Also when i re-wipe everything and then try to reboot, it says my device is missing root.
When i try to re-root, and the device reboots, it gets stuck on the intro screen again so the root doesn't actually complete installing

have you fixed it yet?

so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda

Why does it fails to install? Are there any more error messages?
Also you can try the point "Fix Permissions" under Advanced Options. This could help.

suwidji said:
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Click to expand...
Click to collapse
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
for a solid Sami based rom then i suggest using GoldenEye.

scottyf79 said:
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
Click to expand...
Click to collapse
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?

Cyanogenmod is themeable. So you could search for a stock like theme and install that.
If you like an overall more stock rom try scottyf79's recommendation.
If you want to flash a complete new Rom first copy zip onto sd, then boot into recovery, wipe data and cache, then falsh zip file.

Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)

suwidji said:
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Click to expand...
Click to collapse
personally -
i use Philz recovery
before install of a new rom - i use the "new rom" wipe option rather than the normal data,cache and dalvik wipe (it does this but adds in some extra steps)
then flash the rom of choice
if you get any other messages before reboot - select no
like i said before, if you want a stock looking Sami rom then try Golden Eye.

Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)

Wifi problem on stock de odexed

Hey guys need a help
Just don't slap me with - noob search this that blah blah (i know I'm one still read patiently)
Well i flashed a stock de odexed rom today via (hells kernel) cwm
When wifi was toggled it scanned for a while and then rebooted...
I flashed wifi drivers, re flashed kernel etc. Yet rom rebooted. Back to Evo X and wifi is fine (so i assumed it's a problem in software not my mobile)
I actually tried flashing drivers, setting permissions and re flashed kernel..
I searched on XDA and majority of posts were ICS and JB roms.. Hence I posted this. Thanks in advance

If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted

marcussmith2626 said:
If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted
Click to expand...
Click to collapse
Thanks a lot sir i didn't know about the two different files. I had oly dhd
And thanks for uploading it too ^_^

marcussmith2626 said:
If you're using hells fusion #50 kernel Flash dhd1.1 in cwm with system mounted
if you are using most other stock based kernels flash dhd-stock in cwm with system mounted
Click to expand...
Click to collapse
Sir it didn't work... After i flashed drivers(with system mounted) and toggled wifi, it detected network but then rebooted (actually it was more like hot boot)... Just as it was before. I guess i didn't download a proper de odexed rom.

tony_stark_noob said:
Sir it didn't work... After i flashed drivers(with system mounted) and toggled wifi, it detected network but then rebooted (actually it was more like hot boot)... Just as it was before. I guess i didn't download a proper de odexed rom.
Click to expand...
Click to collapse
if you have rom problems
download any stock based custom rom from dev section and put on root of sd card
go into recovery
flash temp cwm zip if using a kernel that doesn't already have cwm
goto mounts and storage
format system data and cache
mount system data and cache
flash rom zip
restart
at the moment you cannot download stock roms to flash via odin as hotfile has been closed down although I have uploaded a stock rom firmware to dev host which you can find on or near the last page of dokys firmware thread on dev section - it will boot your phone but its European firmware so may not work on your network but at least it will boot your phone if flashing a custom rom with the method above doesn't work

marcussmith2626 said:
if you have rom problems
download any stock based custom rom from dev section and put on root of sd card
go into recovery
flash temp cwm zip if using a kernel that doesn't already have cwm
goto mounts and storage
format system data and cache
mount system data and cache
flash rom zip
restart
at the moment you cannot download stock roms to flash via odin as hotfile has been closed down although I have uploaded a stock rom firmware to dev host which you can find on or near the last page of dokys firmware thread on dev section - it will boot your phone but its European firmware so may not work on your network but at least it will boot your phone if flashing a custom rom with the method above doesn't work
Click to expand...
Click to collapse
No worries sir, i have Evolution X rom and 2 other in my sd card. Also i have 2 backups.. I just wanted to experiment and probably try to solve the issue on stock. I'm in evo x and everything is working fine.
Thanks a lot for assisting me immediately (pressed the button too )
The thing is i don't have a comp. So i was trying out different stock (cwm flashable) . I will just download one from doky's thread after the website issue has been sorted out

tony_stark_noob said:
No worries sir, i have Evolution X rom and 2 other in my sd card. Also i have 2 backups.. I just wanted to experiment and probably try to solve the issue on stock. I'm in evo x and everything is working fine.
Thanks a lot for assisting me immediately (pressed the button too )
The thing is i don't have a comp. So i was trying out different stock (cwm flashable) . I will just download one from doky's thread after the website issue has been sorted out
Click to expand...
Click to collapse
flashing a stock cwm zip doesnt actually give you stock rom as such - think of it more like a custom rom with no changes made to any files
To make it work properly you really in the case of flashing a deodex stock rom via cwm you need to be on the same baseband as the stock rom
To actually flash stock rom and to change basebands you needs to flash the stock rom firmware via odin

marcussmith2626 said:
flashing a stock cwm zip doesnt actually give you stock rom as such - think of it more like a custom rom with no changes made to any files
To make it work properly you really in the case of flashing a deodex stock rom via cwm you need to be on the same baseband as the stock rom
To actually flash stock rom and to change basebands you needs to flash the stock rom firmware via odin
Click to expand...
Click to collapse
Sir i have indian version. I didn't change basebands but ya i didn't know about the odin thing which u mentioned. Thank u

[Q] uninstalling slimkat (cm11)

Hi guys, need some help here. I'm sure this has been asked before but i just couldn't find any
Installed slimkat 20140406-0134 rom (cm11) last night and it's basically working. But I'm still not feeling comfortable using it as there's still bugs around. So thought of going back to cm7.2 for now. But for the life of me couldn't figure out how to get to the tool section so I can re-partition it back to ext3!!!
All I could get in to is twrp recovery and that's it. how do I even get into the bootmenu section where I can choose recovery, cpu settings, tools, etc? There's no red Moto logo with blue LED at boot up anymore
Is there any uninstall instruction somewhere, or perhaps someone should write one?

44 viewers but no reply
any idea if i can install some sort of apps to achieve the same end? like a wipe app to re-partition it to ext3, and then an older recovery to install cm7 rom, or restore my cm7 backup?
don't really want to just try and see what will happens. also trying to avoid flashing sbf and start from scratch.....
edit: will aromawiper work? reboot to twrp recovery 2.6.3.0, aromawipe to ext3 and then flash cm7.2 rom straight after? expert opinion and advice please.
edit 2: oh well, tried it and didn't work. might be because i didn't install an older, compatible recovery before i rebooted. stuck at red moto logo and had to flash sbf and start all over again......
case closed...........

jh20 said:
44 viewers but no reply
any idea if i can install some sort of apps to achieve the same end? like a wipe app to re-partition it to ext3, and then an older recovery to install cm7 rom, or restore my cm7 backup?
don't really want to just try and see what will happens. also trying to avoid flashing sbf and start from scratch.....
edit: will aromawiper work? reboot to twrp recovery 2.6.3.0, aromawipe to ext3 and then flash cm7.2 rom straight after? expert opinion and advice please.
edit 2: oh well, tried it and didn't work. might be because i didn't install an older, compatible recovery before i rebooted. stuck at red moto logo and had to flash sbf and start all over again......
case closed...........
Click to expand...
Click to collapse
you can flash cm10 to get the boot menu to format to ext3 then flash to cm7.2.
Thats what i did when i tested cm11.

Or use Aroma wiper to format to ext3 and flash CM7.2.
Sent from my Nexus 7 using Tapatalk

aperture said:
you can flash cm10 to get the boot menu to format to ext3 then flash to cm7.2.
Thats what i did when i tested cm11.
Click to expand...
Click to collapse
thanks. i'll remember that next time. don't know why i didn't think of that. panic striken maybe
hotdog125 said:
Or use Aroma wiper to format to ext3 and flash CM7.2.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
that's exactly what i did but didn't work. aromawiper seems to have worked properly but twrp 2.6.3.0 keep saying "no os installed" after i installed the gb rom and tried to reboot. tried maniac's cm7.2 and an older wiui gingerbread rom. i thought it might be a hickup and rebooted anyway and that was it.
don't know what went wrong there. has anyone actually tried this method before and got it to work?
edit: imho twrp is not worth it. it rebooted 8-10 times on me after installing cm11 and tried to get back into recovery to flash gapps. also other problems like blank backup files and my failures to install rom problem. they should have stuck to cwm until the problems are fixed.
edit 2: and i think removing bootmenu is not a good idea. more steps to take if you want to go back to cm7.2.