what is the difference between CWM 5.5.0.4 and 5.8.3.1. Why ROM manager installed CWM 5.8.3.1 in Galaxy Tab P7500 while taking backup, though CWM 5.5.04 was already installed using ODIN I.85. Is it necessary to re install CWM 5.5.0.4. If so, how to re install CWM 5.5.0.4. My galaxy TAB P7500 is running on stock ICS 4.04.
Only a few changes are made(you can't even say where)from 5.5.0.4 to 5.8.3.1...
The ROMmanager must make sure that the CWM on your device matches with the version of the APP,but upgrading does no harm i.e. it's no need to reinstall CWM...
Beware!don't go into CWM if you are on the stock ICS because it has the rolling screen issue,flash all you need with ROMmanager,don't install CWM touch when you are using stock ICS(it'll be a waste of time,mony,etc)
If you want to get out of CWM(5.5.0.4) after flashing but get confused with the rolling screen just do thisress vol down and then press the power button twice...the tab restarts with all the changes you've made...
And finally:feel free to ask questions,XDA in always here to help you!
arashtarafar said:
Only a few changes are made(you can't even say where)from 5.5.0.4 to 5.8.3.1...
The ROMmanager must make sure that the CWM on your device matches with the version of the APP,but upgrading does no harm i.e. it's no need to reinstall CWM...
Beware!don't go into CWM if you are on the stock ICS because it has the rolling screen issue,flash all you need with ROMmanager,don't install CWM touch when you are using stock ICS(it'll be a waste of time,mony,etc)
If you want to get out of CWM(5.5.0.4) after flashing but get confused with the rolling screen just do thisress vol down and then press the power button twice...the tab restarts with all the changes you've made...
And finally:feel free to ask questions,XDA in always here to help you!
Click to expand...
Click to collapse
I'm using CWM 5.5.0.4 here with stock ICS. No problems at all.
5.5.0.4 is the version recommended to prevent rolling recovery.
I also followed pershoot's advice in the 2.6.36.4 thread. I did get the rolling recovery even with 5.5.0.4.
I am on stock US ICS and odined the following:
(1) US ICS 4.0.4 BL variant
(2) Recommended recovery (CWM non touch 6.0.1.2)
Now I have no flicker in the recovery or the ROM like I had experienced in the past. However, I'm rather way of CWM 6.0.1.2 because I used the previous non-touch (6.0.1.1 I think) and wasn't able to restore a Nandroid...it just hung on me. Where did you get the 5.5.0.4 that worked with stock ICS ROM/BL Jack?
Hi dj.
Can't remember now where I got 5504, read so many guides.
I have it in my drop box.
I'll post the link for it shortly.
Really
djmatt604 said:
I also followed pershoot's advice in the 2.6.36.4 thread. I did get the rolling recovery even with 5.5.0.4.
I am on stock US ICS and odined the following:
(1) US ICS 4.0.4 BL variant
(2) Recommended recovery (CWM non touch 6.0.1.2)
Now I have no flicker in the recovery or the ROM like I had experienced in the past. However, I'm rather way of CWM 6.0.1.2 because I used the previous non-touch (6.0.1.1 I think) and wasn't able to restore a Nandroid...it just hung on me. Where did you get the 5.5.0.4 that worked with stock ICS ROM/BL Jack?
Click to expand...
Click to collapse
Here ya go dj
https://dl.dropbox.com/u/99900479/recovery.tar.zip
You're the man! I may go back to stock firmware just to give this a go. Thanks!!
djmatt604 said:
You're the man! I may go back to stock firmware just to give this a go. Thanks!!
Click to expand...
Click to collapse
You're welcome.
Good luck.
Thank you for your nice advice and assurance. Sir I have another question/doubt. Please clarify
I am having P7500 in India. I flashed Italian stock rom 4.04 using ODIN. Later rooted the Tab using CWM 5.5.4 method. subsequently I installed ROM Manager. I did back up. It appears that CWM version was changed by ROM manager. Now I want to flash Indian stock rom 4.04 recently released and also rooting. Please suggest a mode.
Download the stock IN firmware from Sammobile and flash in Odin with PDA with your tablet in download mode. You will lose everything on your internal storage so if you want to keep your backups make sure to move them off the tablet before you flash.
You'll find lots of guides in the Q&A and Dev sections that will provide root methods for your 4.0.4 stock firmware. Or, you can skip all of this and just flash a rooted ICS ROM with a full wipe to save yourself the steps. It's really up to you.
Thank you Sir for your valuable advice.
Please clarify, If I flash INU stock ROM 4.04 on ITLY stock ROM 4.04, using ODIN, will it wipe out applications data also?
Earlier When I flashed ITLY stock ROM 4.04 on my original stock ROM 3.2 INU on my galaxy tab p7500 using ODIN, it did not wipe out any data from internal storage and all the applications were automatically installed after reboot..
It may, it may not...it depends on whether or not you boot up after the flash without issues. If you get stuck on the Samsung logo or a boot loop, you will need to boot into stock Android recovery and do a factory reset, that would format your /data partition and result in loss of apps etc.
That Thanks button works well if I have helped you makes me look like less of a noob! Good luck to you
djmatt604 said:
It may, it may not...it depends on whether or not you boot up after the flash without issues. If you get stuck on the Samsung logo or a boot loop, you will need to boot into stock Android recovery and do a factory reset, that would format your /data partition and result in loss of apps etc.
That Thanks button works well if I have helped you makes me look like less of a noob! Good luck to you
Click to expand...
Click to collapse
I recommend doing a full wipe with CWM recovery before flashing with ODIN. Doing that avoids having to do a full wipe with Stock recovery which wipes the internal. Wiping before flash should avoids formatted internal. Would others confirm, this is what I have noticed on my tab.
Related
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Also I'm able to go back into recovery mode and restore my backup. So my phone is currently back in stock rom.
AnroidGuy2011 said:
Hi, I have rooted my phone and have s off. I've purchased rom manager and installed clockworkmod 3 and have backed up my phone.
When I try to flash the latest cyanogenMod Nightly I run into problems.
The phone gets wiped and updates and then it gets stuck at the Tmobile my touch splash screen. I've left it there for 10 minutes and still no cyanogen.
Any help is greatly appreciated
Thanks
Click to expand...
Click to collapse
If you successfully backed up your phone you are not using Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
What color was the text when you were in recovery? Orange or green?
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
if you are wanting CM7 yes you need to flash Clockwork ROM 3.0 via the Fastboot ADB commands. If you are wanting your phone to work you can flash of any of the other ROMS as of right now.
Clockwork ROM 3.x will not do nandroid back ups in it's current state. As Gingerbread comes closer to being an official or RC i'm sure they make sure it can do nandroids. nor will 2.x do nandroids of CM7. but to answer your question you are correct.
AnroidGuy2011 said:
Its Green, so I have clockworkMod Recovery 2.5.1.2
So I need to update to the 3.x and I should be good?
Also to do a successfull back up of my nandroid I go to "backup and restore" and then select "backup"?
Thanks again for your help
Click to expand...
Click to collapse
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
TrueBlue_Drew said:
You are correct. See my thread here For the easiest way to install 3.0.0.5. And yes you can use Rom Manager for backups while on 2.5.1.2 but Rom Manager isnt compatable with flashing or backups for 3.0.0.5. You must use recovery.
Click to expand...
Click to collapse
This is good. Every time I try to answer a thread, you seem to beat me to it.
Thanks for the help
neidlinger said:
Clockwork ROM Recovery 3.x. It's a well known fact that that Recovery image has problems backing up Nandroids, or restoring them for that matter.
Click to expand...
Click to collapse
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
igrillem said:
I rooted, made a back up with Clockwork ROM Recovery 3.x. , flashed CM7 and everything was fine. Then I flashed Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09 and when I unlocked the screen everything started force closing on a black screen. I locked the screen again, powered off and on again then it got stuck on the splash screen. I restored my back up and it's stuck on splash screen still. Then I tried to flash Kernel 2.6.32.21grankin010OC0v0.05 thinking my back-up might need a stock kernel. I am a super noob at this, I have successfully flashed roms to my tab before, but I've only been learning about this for about a month. I've been searching and searching but can't seem to find a solution. Am I screwed?
Click to expand...
Click to collapse
IMHO opinion you are not screwed.
When flashing custom Kernels you need to have a program like SetCPU so you can govern the CPU speed. To fast of a speed or to slow of a speed and it will not boot correctly. You need to flash a different version of CM7 than you are using now, via the recovery screen. make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
As well i wouldn't recommend flashing kernels with Nightlies. They are unstable as it. and you need to make sure the kernel is compatible with Nightly you are using. And you can over clock them to 1.5Ghrzf from w/ in the ROM.
neidlinger said:
make sure to wipe the handset first. that should reset the Kernel to one that Zinx knows works with the phone.
Click to expand...
Click to collapse
HHHmmm I'm glad I never forget this step on the toilet! Thanks for the help!
Hi guys, I think I soft bricked a galaxy note, this is the things I did (I was trying to install ICS Stunner)
It came with the kernel KK8 that is non rootable, so I downgrade it to KJ1 (SGN_XX_OXA_KJ1_FACTORYFS) and it worked fine.
Flashed the Abyss kernel (AbyssNotekernel42CWTouchCustomLogo) via CWM and rebooted again to recovery
Flashed ICS Stunner (ICS_Stunner_Beta5.0) via CWM and FORGOT to wipe data/cache so it got in a boot loop
Booted again to CWM and wiped data/cache and still the rom wouldn't boot, so I decided to flash again the rom
The rom wouldn't flash via CWM I mean I selected the zip but the process wouldn't advance, same with the abyss kernel
So decided to start all over again and reflashed KJ1 via Odin (it was sucessfull), but now stock rom won't boot, if I shut down the phone and connect the charger the battery animation stays emtpy, I mean no green bar filling or nothing
The device can get to download mode, but I don't know what to do now, reflash another stock rom?
flash with heimdall?
If anyone can help it would appreciate.
Oh by the way, all this stuff was with the battery at like 20% (I know, pretty stupid)
You lost root during the process.Can you go again in download mode and flash with pc odin stock gb rom?
try this one 3*Files Wipe N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012) from here
http://forum.xda-developers.com/showpost.php?p=23357737&postcount=1
if the flash is succesfull you may go in boot loop.remove the battery put it again in,with volume up+home+power go to stock recovery and do wipe cache and wipe data/factory reset .reboot
Sent from my GT-N7000 using Tapatalk
thanx man, downloading now
Dude i think u forgeted to flash ics repack before flashing ics stunner. .
Sent from my GT-N7000 using XDA
damn I tought it was not necesary on ics stunner 5.
Anyways the battery is full dead, had to go to buy an external charger and now is charging
maxthebest685 said:
Dude i think u forgeted to flash ics repack before flashing ics stunner. .
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Actually yes (this is the method i prefer) but he followed the instructions
"NEW STEPS BETA 4.3 ONWARDS:
Backup data apps.
Download and copy latest Stunner ROM on your SD Card.
Make sure you are on Rooted ROM. Reboot in recovery.
ONLY IF YOU ARE ON GINGERBREAD: Flash Abyss Kernel. Goto Advanced and Reboot Recovery.
Wipe Data (Recommended but not mandatory if you on Stunner ROM already)
Flash ROM.
Flash suitable Modem (Optional, recommended ICS LP5 modem)(not included in ROM)
Reboot and Read Caution.
Do not restore system apps or system data."
one think that may brake the procedure is he may come from a not properly rooted gb rom.I always mount system and always copy-paste some test files to /system in order to be sure sure that i did not lost root.I hope to solve your problem
i had the same issue two days ago nothing serious tried wiping factory but each and every move got the process stock at the beginning so at last i got it charged about 60% then went to download mode and flashed a GB ROM (STOCK) after all with the stock packages odin doesn't inscrease flash count so not to worry just get it to work again and next time wipe cache (preferable factory reset too) i recommend this step, then flash a repack LP1 of Chainfire to get things moving wouldn't take too long with a 90% power you can do all of these steps without any problem dont be paranoid......
oh god this -> Rooted_Stock_Odex_N7000XXLC1 saved me, thanx guys, the phone has booted, I have a captivate and never had this kind of issues the GNote its not even mine.
So just to know, for ics stunner 5 I need to flash first the ics repack
Yep. If you're properly rooted (and with that pre-rooted rom you are) then just install CWM recovery and Mobile Odin, flash the ICS repack, reboot to recovery, flash Stunner and then wipe data/cache/Dalvik, reboot and you should be good to go.
stunner 5.0 beta
what a rum the best is the Stunner beta 5.0 LP6_Kernel_repack may recommend a different kernel is not as happy with a repack
MIDNOTE2.1_BASE or Stunner beta 5.0
Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
If you are getting to the samsung logo, have you tried starting in download mode or recovery mode and then re-flashing the rom?
Sent from my GT-N7000 using XDA
What is your phone's history? Stock gb or yours one used to be flashed with any leaked ics kernel or rom? This is giving people getting more details what they should or should not do.
Sent from my GT-N7000 using xda premium
pezx44 said:
If you are getting to the samsung logo, have you tried starting in download mode or recovery mode and then re-flashing the rom?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I can't even get to recovery anymore; i get this everytime 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' PC odin keeps getting stuck at factoryfs.img
becknise said:
I can't even get to recovery anymore; i get this everytime 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.' PC odin keeps getting stuck at factoryfs.img
Click to expand...
Click to collapse
Question is can you go into download mode now? Another is to see your responding to my above question.
Sent from my GT-N7000 using xda premium
veasna.kelly said:
What is your phone's history? Stock gb or yours one used to be flashed with any leaked ics kernel or rom? This is giving people getting more details what they should or should not do.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I once flashed a leaked ICS rom but i only had it for 1 hour and i went back to stock GB using PC Odin. Today i flashed official ICS and i wiped and that's where the problem began. I can still boot to download mode if it helps?
please change the title
to
WARNING DO NOT WIPE VIA CWM ON NEW GERMANY ICS
the stock recovery works fine..infact thats how i got it working after flashing to ICS via odin from stock GB
I needed to go to stock launcher and wipe cache and data
PLUS am sure by now most read users know NOT to do wiping and restoring operations on CWM on the new german ICS..
veasna.kelly said:
Question is can you go into download mode now? Another is to see your responding to my above question.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes i can go into download mode.
search the thread on this forum and look for flashing prerooted gb lc1 rom with pit file via PC odin and make sure you are on the right pit file version bf flash.
Just read more and maybe this could help you at least back to gb when your phone still be able to boot into download mode.
Pls note that your phone on a risk now and do this at your own risk.
Sent from my GT-N7000 using xda premium
Delete this thread! I wipe and wipe and wipe....no problems...all depend where u coming from....so stop all this stupid warnings......or stop flashing any ROMs.
I believe the problem is a little more complex than just wiping with CWM. And I believe OP should describe a little bit more of history before I got to that point.
I have personally just wiped data/factory reset with CF-CWM with NO problem at all.
I went from stock GB KK2 to stock ICS LPY using CF-CWM . Did not wipe anything before the update. Everything went smooth. Today I decided to wipe in order : Dalvik - Cache - and finally data/factory reset , all from the CWM recovery screen, that I started from the CWM Manager. Rebooted my SGN and everything was fine.
P_
pakalrtb said:
I believe the problem is a little more complex than just wiping with CWM. And I believe OP should describe a little bit more of history before I got to that point.
I have personally just wiped data/factory reset with CF-CWM with NO problem at all.
I went from stock GB KK2 to stock ICS LPY using CF-CWM . Did not wipe anything before the update. Everything went smooth. Today I decided to wipe in order : Dalvik - Cache - and finally data/factory reset , all from the CWM recovery screen, that I started from the CWM Manager. Rebooted my SGN and everything was fine.
P_
Click to expand...
Click to collapse
As quoted many times, some people can wipe 1000 times until brick or even forever and it may never happen, even on leaked kernel, if you wiped 500 times still dont mean it is safe for everyone.
I can only speak from my experience, but I also have had no problems with LPY ICS.
I came from CM9, but I decided to flash stock GB with PC odin before flashing LPY.
Rooted GB with the zergrush exploit, then flashed LPY with CF_root kernel using mobile odin pro.
Made a backup of LPY and a factory reset wipe in CWM. No problems at all.
No idea if I just got lucky or not. Bit nervous about using it, thinking to go back to CM9, to be safe.
nandihno said:
please change the title
to
WARNING DO NOT WIPE VIA CWM ON NEW GERMANY ICS
the stock recovery works fine..infact thats how i got it working after flashing to ICS via odin from stock GB
I needed to go to stock launcher and wipe cache and data
PLUS am sure by now most read users know NOT to do wiping and restoring operations on CWM on the new german ICS..
Click to expand...
Click to collapse
Stock recovery does not work fine - we have at least one incident of someone experiencing eMMC damage after a wipe with stock recovery
As stated EVERYWHERE - Just because some people are able to wipe successfully doesn't mean everyone is safe. The chance of bricking is maybe 5-10%, but:
On safe kernels it's 0%
Those who have wiped before are not guaranteed to continue being OK - over in the Epic 4G Touch forums, some users experienced problems after safely wiping 10-20 times or more. Some people's devices died on the first wipe, other's continue to be fine
becknise said:
Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
Click to expand...
Click to collapse
Hi becknise. What was the leaked ICS rom that you flashed ? Did you flash CM9 or a variant ?
becknise said:
Ok so i flashed ICS onto my galaxy note with CMW. I then boot into CMW recovery and i pressed wipe data to factory reset. The phone got stuck on wiping data and i pressed the power button. This caused it to restart but it got stuck on samsung logo. I thought ok i will just flash GB rom using PC odin but this did not work. I will send it back to samsung tomorrow for repair, hopefully they repair it. My binary count is 'no', can they tell if i have CMW on it?
ANYWAY YOU ARE WARNED!!! DO NOT WIPE ON THE OFFICIAL ICS ROM.
Click to expand...
Click to collapse
Hmmm...
Interesting... actually in the 1st place y did u press the power button during wipe? This mayb the reason rather than Germany ICS for ur case...
If the phone got stuck, the phone wont respond even if u press the power button.. i suspect its doing wiping in the background... need to b a little patient.
I once had wipe data for abt 15 - 20 mins but i juz let it do the job till it said its completed...
Noted From My G.NOTE Using XDA Premium
I absolutely do not understand this at all. But, I guess no one does.
There's GOT to be some variables that are similar with everyone that has the bricks happening. I have not bricked and I have been on about 4 or 5 leaked ROMs (and kernels). But, I decided not to take any more chances and I am on official ICS rom now, however, I did not flash CF Root kernel with the Open Germany ICS Rom. I got root by flashing CWM.zip and Busybox (per Dr.Ketan's post).
rogconnect said:
Delete this thread! I wipe and wipe and wipe....no problems...all depend where u coming from....so stop all this stupid warnings......or stop flashing any ROMs.
Click to expand...
Click to collapse
Not stupid.
Same thing has happened to lot of people including me.
I didnt ever touch CM9. Went from GB safe kernel straight to LPY. And did data/factory reset from CWM and bam... Phone is bricked.
DId not touch Nandroid, Did not restore, did nothing other than wipe.
I can get into download mode and CWM recovery. Even managed to flash the redpill recovery and GB rom via CWM but phone wont boot. ODIN cannot flash and gets stuck at NAND flashing step.
Its not stupid warning. Its a valid warning.
andreww88 said:
I absolutely do not understand this at all. But, I guess no one does.
I did not flash CF Root kernel with the Open Germany ICS Rom. I got root by flashing CWM.zip and Busybox (per Dr.Ketan's post).
Click to expand...
Click to collapse
I didn't even do that. I got root using Mobile Odin Pro and injecting SuperSU from the CheckRom/Abyss 6.2 GB ROM. I cannot imagine anywhere else I may have got root. I did not use CF Root during or after the flash of LPY. I have stock recovery with fully rooted Stock LPY.
Now My question is how to flash a ZIP file of a Custom ROM without using CWR... Unless they release them in Tars as well as Zips. In which case the ROM is likely to have the CWR in the kernel anyway.
tbong777 said:
Now My question is how to flash a ZIP file of a Custom ROM without using CWR... Unless they release them in Tars as well as Zips. In which case the ROM is likely to have the CWR in the kernel anyway.
Click to expand...
Click to collapse
Stay stock and rooted. Study what these custom roms have modified and do it yourself. Most of the time, it's eye-candy flavor that they add for those who want it the easy way. They should be aptly called "customizer" instead of "devs".
Then again, that's just me
Zapped through server hops to XDA forums
Okay so i'm not new to flashing just made a stupd mistake, i have a Bell i9000M and installed CM9.1 and everything went fine and then installed the S3 addon pack that caused a bootloop so went into recovery and flashed back my nandroid here is where i made the mistake and restored back to GB and caused all sorts of problems but long story short I am now 100% stock running GB 2.3.3 and for the life of me cannot get CWM recovery on the phone.
Everytime i install a kernal it bootloops and looks like I can't even get into stock recovery now. I used odin and flashed PDA,CSC,PHONE and tried using 512 pit file.
The phone works just can't get recovery to work or even install a custom kernal like hardcore speedmod.
Tried follow the CM wiki and no luck, that just causes a bootloop on the startup screen.
Firmware:
GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl
jebise101 said:
Firmware:GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl
Click to expand...
Click to collapse
you need root, use UGKG3 rooting kernel from My Android Collections
Thanks, I was able to get back to CM9 and finially installed the correct NANDROID using this, which is for my device
hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Hi,
is there a Odin Version of the Rom you tried to flash? If yes, you could simply bring your device to download-mode and flash the Rom with Odin.
Alternatively search for a odin flashable Recovery and flash this first. Then you could boot to recovery and flash the zip of the Rom.
Sent from my GT-I9505 using xda app-developers app
i tried installing the liquid smooth rom, and from what i can see there is no odin version of the rom :\
Are you able to direct me to an Odin flashable recovery I can use?
im really stressing out about this
i'm in the process of downloading a stock firmware and will try to flash it on, but it's taking forever to download
I don't see why you can't boot again if you have only wiped the user data and cache, just press the home button for 10 seconds and see if it restarts with your reset stock firmware. Otherwise you can reboot into recovery and do the wipes again (not the option to install a new ROM), or put the ROM zip you want to flash on an SD card and then flash from the SD.
I hope this helps.
suwidji said:
hey all,
so i am incredibly new to this scene and just recieved my s4. i was preparing to flash a ROM onto my phone, and got it rooted and installed CWM.
I forgot to download the actual ROM zip file, and went into CWM via goo manager, wiped factory/data and cache. It was only AFTER i wiped everything that i realised i didnt download the ROM zip file, so i rebooted the phone and now it is stuck on the start-up splash screen where it displays "Samsung galaxy S4 GT-I9505" and will not continue :crying:
I was running on stock, and had only rooted the phone.
PLEASE i urgently need to fix this ASAP. Help!
Click to expand...
Click to collapse
You should of made a backup with CWM. That's what it's used for also, besides flashing .zips. Always make a backup that you can restore and keep an extra copy on ur computer and/or a usb drive.
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
when i first did the wipe, i chose the option that i was going to install a new ROM. I'm now assuming that's where i made a mistake.
I did make a backup before i wiped everything onto my SD card, but now i can't even access that backup because it's saying there's nothing.
I've tried flashing a ROM onto it, but it says aborted.
Yes SORF ist right. It should boot into resetted stock firmware.
First try to copy the Rom to SD and then boot to recovery an try flashing it.
If booting to recovery doesn't work (but it should work if you just wiped user data and cache) you should try flashing new recovery with odin.
You could use Philz recovery for GT-I9505 from here http://forum.xda-developers.com/showthread.php?t=2281367
Installation Instructions for installation with odin you find here http://forum.xda-developers.com/showpost.php?p=39433857&postcount=4
windozeanti said:
You have to use Odin to flash a stock firmware from Sammobile website. Make sure you download the correct firmware for your phone.
Dont worry, your phone isn't brick.
Click to expand...
Click to collapse
Thanks, that's what I'm doing right now, but the file is about 1.8GB and taking so long to download...
i wish there was a faster server, but this is the only option i could find :\
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
j0ch3 said:
Have you tried to boot into recovery again and then flash your already downloaded rom from sd? So you don't have to download a complete sammy rom.
Click to expand...
Click to collapse
yes i have tried that, and it says that install aborts.
Also when i re-wipe everything and then try to reboot, it says my device is missing root.
When i try to re-root, and the device reboots, it gets stuck on the intro screen again so the root doesn't actually complete installing
have you fixed it yet?
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Why does it fails to install? Are there any more error messages?
Also you can try the point "Fix Permissions" under Advanced Options. This could help.
suwidji said:
so im going to try a different ROM other than the liquid smoothe one i wanted (since it keeps saying aborted)
question: does it matter if i use ANY s4 ROM regardless of carrier? I'm from Australia and there is no specific carrier for my phone on xda
Click to expand...
Click to collapse
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
for a solid Sami based rom then i suggest using GoldenEye.
scottyf79 said:
try something lite like miui - it will save you time on download and is a good solid base to work from. dont flash the lite gapps without a reboot.
Click to expand...
Click to collapse
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Cyanogenmod is themeable. So you could search for a stock like theme and install that.
If you like an overall more stock rom try scottyf79's recommendation.
If you want to flash a complete new Rom first copy zip onto sd, then boot into recovery, wipe data and cache, then falsh zip file.
Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)
suwidji said:
ok so i went ahead and found the cyanogenmod one
http://forum.xda-developers.com/showthread.php?t=2317040
and installed this and it works
though i dont like the look of this ROM lol, i prefer something a little more stock looking.
Any recommendations?
When reflashing a new ROM, what is the process i need to follow?
Click to expand...
Click to collapse
personally -
i use Philz recovery
before install of a new rom - i use the "new rom" wipe option rather than the normal data,cache and dalvik wipe (it does this but adds in some extra steps)
then flash the rom of choice
if you get any other messages before reboot - select no
like i said before, if you want a stock looking Sami rom then try Golden Eye.
Try the Omega Roms. They are close to stock.
Closest to stock are the prerooted DJembey ROMs (the CWM ones) or the Wanam Lite ROM (it's what I am on now)