G900AUCU1ANCE, I have tried this with odin, but it doesn't work always says fail. Can some one help with this. is there a different firmware I need.
Related
Hello,
I was trying to flash the ILO lollipop firmware that I downloaded from sammobile and the version I downloaded would fail the md5 check so I tried downloading from another website.
I downloaded it and it passed the md5 check, everything goes well with the flash until the very end when it says FAIL. I tried flashing it a couple times, each time it says FAIL so i had to revert back to my old firmware which did flash succesfully. The PIT file is the same for both firmwares so that wouldnt be the issue. Is it possible that the csc causes the FAIL? Any other ideas of why it fails every time?
Has anyone had success in flashing this firmware? G900FXXU1BOC7_G900FOJK1BOC2_G900FXXU1BOC7_HOME.tar
I am trying to unroot my phone. I have a US version of G930A. Sammobile has every county except the USA. I found G930AATT1APB5_User_Binary.zip which has AP_G930AUCU1APB5_CL7193387_QB8719495_REV02_user_low_ship_MULTI_CERT.tar, the BL, CP and CSC file in it. I try to flash it using Odin3, and I get an "odin protocol version error." I take it because the image is a lower version that's what's on there. I would like to download the latest stock image but sammobile doesn't offer images for the US? Or is there a better way?
Wrong forum. This here is for SM-G930F Development, not Q&A. You'll get the answers you're seeking and more, at the S7 AT&T Q&A and Dev forums. Mod, please move - thanks.
Wrong forum. But try using Kies in Download mode
That is what i do when ever i restore my phone.
No Kies good lord. This isn't a Note 2.
You're getting that error because you're on newer firmware than you're trying to flash so it's erroring out.
Follow the Return to stock procedure in this thread:
http://forum.xda-developers.com/ver...sed-unroot-t3411039/post67605246#post67605246
Flash all 4 files, then you'll be on PF2 and able to get the OTA Update to PG1 with wifi calling, etc.
I tried using kies. It asks me for my model. I put in SM-G930A. The serial I put in all caps and it tells me my model number I entered is wrong.
joe3681 said:
No Kies good lord. This isn't a Note 2.
You're getting that error because you're on newer firmware than you're trying to flash so it's erroring out.
Follow the Return to stock procedure in this thread:
http://forum.xda-developers.com/ver...sed-unroot-t3411039/post67605246#post67605246
Flash all 4 files, then you'll be on PF2 and able to get the OTA Update to PG1 with wifi calling, etc.
Click to expand...
Click to collapse
I tried the instructions at http://forum.xda-developers.com/veri...6#post67605246 and I get "FAIL! Model dismatch fail"
dorlow said:
I tried the instructions at http://forum.xda-developers.com/veri...6#post67605246 and I get "FAIL! Model dismatch fail"
Click to expand...
Click to collapse
Which Odin are you using?
You're flashing the PF2?
I've tried many versions of Odin v1 (not the 3). I'm not sure what the PF2 is.
To get it to work, I just defaulted the phone and rerooted it. It's the only way I can get it to work. It's working perfect right now. Only question is how long,
dorlow said:
I've tried many versions of Odin v1 (not the 3). I'm not sure what the PF2 is.
To get it to work, I just defaulted the phone and rerooted it. It's the only way I can get it to work. It's working perfect right now. Only question is how long,
Click to expand...
Click to collapse
for g930a (galaxy s7 at&t NOT EDGE)
WARNING: YOU WILL LOSE ALL DATA MAKE A BACKUP
download these files:
Odin: http://www.mediafire.com/download/2t...din_3.12.3.rar
Flashing Files: https://drive.google.com/file/d/0B17...w?usp=drivesdk
After downloading extract the .rar extract it then extract each, BL, AP, ect... files. Use the odin included in the download to flash and you will be returned to stock. If the odin included still gives you the error you can get the princecomsey version and see if that works from here: http://downloadandroidrom.com/file/tools/ODIN/ODIN-modified.zip
If odin freezes or crashes just restart it and try again, it might take a while foor the AP file to load into odin so just be patient and if it looks like it is about to crash wait about 2-3 minutes then force close it and try again.
Now you are returned to stock an all set !!
(p.s) - PF2 is the latest firmware as of now for the g930a, meaning when you flash this you will be all set. You may have tried to flash the original PF which is now outdated cause AT&T updated it, I did this and it worked but i could not update my phone so I flashed this one and it works perfectly and Samsung pay is up and running.
Ok so here's my issue
For a very long time since the G930U firmware was available to install, I've been using that. Well I decided to want to get my phone unlocked for GSM using those services but it needs Stock Firmware.
So I tried to restore to the latest G930P firmware and ODIN is giving a Volume size error for the system.img.ex4. I've tried now a couple different firmwares and no luck. Any idea?
The latest Firmware is PH7 I don't recommend it. PG1 on down are good to go. Extract zip stock firmware to a folder and add it in to Odin all the slots accordingly. BL AP CP CSC the last slot CSC is HOME_CSC not CSC_SPT and start flashing. It always works for me.
I ended up figuring it out. I had to find the stock G930P .PIT mapping's and re-partition because G930U ended up changing the sizes.
Oh good to know. Thank for sharing
Why do you not recommend PH7 update? I've heard it helps with battery life.
Could you share the pit file you used. I tried the same thing with a pit file i found online how ever since the pit i am able to flash bootloader but unable to flash system.ext4. Odin gives me a "failed (auth)" and neyjer the 930u version or the f2 or any of the other stock roms wont flash.... Help please
Don't you just love it when people "figure it out" and then don't share how? lol
Here... Since nobody gave you this. This may not be your problem.
https://drive.google.com/file/d/0BzyeAt2hy6XeenhWM2dNSU40TDA/view?usp=sharing
Hi,
I cant seem to find anything related directly to the S8 and not sure if all mobiles are the same..
I had Android 8 on my S8 and needed to downgrade to 7 to try something, I did that but after it completed I had a messy settings menu where parts were duplicated or showing the wrong sub-heading.
I've read on the forums about this and it says re-flash with CSC and AP to fix.
When I try to re-flash it gets stuck on "Set Partition" in Odin.
I read to fix this you need to enable the "re-partition" option in Odin, I have tried this and it still does not work.
I have also tried full flash or AP, CSC, BL and CP and it's still getting stuck.
Tried on two different PC's (just in case) - same result on both.
The phone still boots and works, but it feels like something is wrong.
Can someone advise on how to completely re-flash the phone? The videos I've watched so far don't seem to run into this issue.
Any help would be awesome
Update: Using odin 3.13 gives this error: <ID:0/005> Can't open the specified file. (Line: 1892)
I've tried it with SamFirm and Sammobile FW.
EDIT - Finally fixed it, flashed G950FXXU1AQDG to the handset, wiping and re-partitioning the phone, after setup an OTA update was pushed for 8.0.
In case anyone else has the same issue, I used Sammobile for the FW and Odin 3.12 to flash.
I am having a heck of a time installing the stock firmware on this device. It came to me softbricked and I have used almost every firmware available from the XDA official Galaxy Tab 4 forum, Sammobile and even the SAMFIRM tool. I do not know if this is a PDA issue or what, But I have been able to flash the bootloader with TWRP and install some custom roms which makes me think I am using the wrong firmware but I am lost as of right now.
FIRMWARES I HAVE TRIED:
T530NUUEU1BQC1_T530NUXAR1BQC1_HOME.tar
T530NUUEU1AOA2_T530NUXAR1AOA2_HOME.tar
T530NUUEU1ANK1_T530NUXAR1ANK1_HOME.tar
T530NUUEU1AND4_T530NUXAR1AND4_HOME.tar
T530XXU1AOA1_DBT1AOA1_v4.4.2_Repair_Firmware ( 4 file repair) Only one I can find
Other Regions XAC and BNN Firmwares
_T530NUXAC1BQC1_HOME.tar
T530NUOVS1BPL1_T530NUBNN1BPL1_HOME.tar
I have tried multiple cables and odin3 versions
Odin3 v 3.04
Odin3 v3.07
Odin3 v3.12.3 & v3.12.5
Odin3 v3.13.3
Odin always fails on aboot.mbn not matter what...sometimes I can get it to say re-partition failed or secure boot fail PIT or secure boot fail aboot
When I flash the stock bootloader I can see at the top of the screen T530NUUEU1BQC1 and at the bottom Multi CSV, XAR selected.
Any help would be very much appreciated.
Anyone have any suggestions at all?
If someone could please let me know what I am doing wrong or any other suggestions I would greatly appreciate it.
Something I forgot to mention is whenever I try to flash the stock firmware it always fails on aboot.mbn. I really hope someone can give me some insight on this.
I can't answer your questions, but: Does it have to be the original Stock Rom? Why don't you stay with a custom rom? Dirty Unicorns MM may be old but it's very stable since years on my device.
I mean I don't " have" too install the stock rom but I would like to know what my problem is it would greatly help me in the future on other devices.
I will give dirty unicorn a go.