Database Users

Updated ON Officle lollipop 5.0.2 And Facing soft brick(How to Unbrick?)

Hello guys please help me, I am On latest official lollipop . I am trying to root my device and try to install twrp recovery flash, suddenly recovery got a error:crying:, Now I am on Lollipop My stock and twrp recovery is gone, i am not able to boot into recovery option, Just Yu logo come and mobile gets switch off. I think i got soft brick my device. but i Am able to go to fastboot mode?. I hear that cant flash cm11 after cm12 update so i cant go back to cm11, Just tell me friends what to do?
- if i have to flash again stock cm12 recovery? to get recovery option? If yes then please some one provide me cm 12 stock recovery
- if i have to flash cm12 how can i flash? via flashtool? but no firmware cm12 available right now
Help Guys

reply
reply Guys please:crying:

Have a look at this thread at YU - http://forums.yuplaygod.com/threads...6-0-for-yureka-arm64-flashable-lollipop.8630/
If you can enter fastboot mode, you can simply flash the TWRP recovery and then do root your phone. You can even try factory reset and see if you can boot again into your ROM. If can't, then you would need to flash whole CM12S ROM via fastboot mode. Here is the link for the CM12S ROM to be flashed in fastboot mode only -
http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Warning : Do not even dare to think to go back to or use anything from CM11s. Hit thanks if it helped. Good luck!

been there, and recovered.
this is what I think you need to do to recover:
download
1) dr ive .google . com/file/d/0B0_IwOvcRE4gcnNHcF9wNDcxRGs/view
2) docs. google. com/file/d/0B0_IwOvcRE4gcUpnSmVjdDAzOE0/view
3) drive. google. com/file/d/0ByDCheN6iyw0WEpveWJoTnRiWnc/view
Steps to follow:
1) extract zip (1) and (2) in the same folder
2) power off your phone completely- if in doubt, pull out and reinstall battery.
3) place zip (3) in the root of your sd card of phone, and put the sd card back into the phone.
4) connect the phone in fastboot mode, and run "flash-all.bat"
(If it asks you to unlock your bootloader, do so by following the onscreen instructions.)
5) after process is complete, power on your phone after disconnecting.
6) let it boot up for a while, say 20 mins. this step may be skipped.
7) boot into recovery mode, and click on apply update.
8) navigate to the folder with zip (3) in it, and apply it.
9) if it gives an error, wipe cache and retry.
10) after process finishes, power on phone and let it welcome you to lollipop.
cheers!

BOOTLOOP/Brick LG G2 (D802)

So here's what happened i was flashing the LLAMA Sweet Kernel for my D802 from RenderKernel (KK Bootsack loki signed, KK Bootloader) then i got stuck on LG Logo at first i thought it was fine but it hasn't move for like 30 mins. Then i tried to reboot and enter recovery mode. I can't enter recovery mode i tried it several times turned off first then Volume Down + Power button its not working anymore. But i can access DOWNLOAD MODE which is good i think.
Can someone please help me sort this thing out i just need to have TWRP recovery and i can handle the rest. How could i flash it using download mode. Thank you guys
LG G2 D802
16GB Version
Euphoria ROM
LLAMA Sweet Kernel

Try installing the stock LG Mobile Support Tool and USB drivers.
Open the support tool program, connect the phone in download mode, click on "Options" in the top right-hand corner, select upgrade recovery, and, hopefully, the program will download and install the correct firmware for your phone.

audit13 said:
Try installing the stock LG Mobile Support Tool and USB drivers.
Open the support tool program, connect the phone in download mode, click on "Options" in the top right-hand corner, select upgrade recovery, and, hopefully, the program will download and install the correct firmware for your phone.
Click to expand...
Click to collapse
Will this one completely delete everything? Or change the current ROM i've been using // Will this one also delete media files photos/music etc?
Is there any way that i can just flash TWRP on download mode so that i will just flash bootloader/bootstack or kernel thats causing this bootloop/brick.
Thanks

Yes, it will wipe everything.

audit13 said:
Yes, it will wipe everything.
Click to expand...
Click to collapse
So There's no other way to save my media files. i mean there's no other way to flash any recovery to my phone even though i can access download mode? Is that it sir?

have you tried re flashing twrp?

How can i re-flash it? ROM not loading stuck on Boot Logo, can't go to recovery. Only download mode working i already installed drivers and its been detected. I just dont know if there's a way to flash twrp on download mode.

I read some posts where it will delete data, others say it won't. I would just assume that flashing stock would return to stock and delete data.
Not sure how to flash twrp from download mode.

LG G2 - D802 cannot enter Recovery Mode / Download Mode key combination while booting

Hello all,
I have an LG G2 - D802 with CM-12.1 and TWRP as Recovery partition.
After the phone has undergone several software and one hardware bricks, I suppose there is something wrong with the phone's partitions because I cannot access the Recovery partition or the Download Mode when booting by using the key combination.
I found out by trying to do a clean flash of CM13 on the phone via TWRP and External memory via Mini USB - USB Memory stick and when I have deleted all partitions including the Internal Storage, System, Data, Cache & Dalvik Cache, I tried to flash the CM13+GoogleApps but then I have booted the phone I could see only the LG logo for a few seconds and then a black - on screen.
When I plugged the phone on my PC I could see a lot of partitions and I have followed a guide I found in the forum to unbrick. Then miraculously the phone had booted into the TWRP recovery without pressing any key combination. After that, I have restored to my precious backup.
Specifically then I'm trying to boot to Download Mode (to flash the Official LG Firmware and unroot), I turn the phone off, I press the Volume Up + Power, then when I see the LG logo I unpress and press the Power button but the phone keeps booting to my CM12.1 OS.
The same occurs when I 'm trying to boot to the Recovery parition (TWRP), however I can boot there via the CM's advanced reboot menu.
The reason I wanted to flash the Official Firmware and unroot is because I thought it will bring the Recovery and Download mode back..
How can I flash the correct images for the Download Mode and Recovery mode on the phone?
Also should I leave the Internal Storage intact instead of formatting via TWRP before I flash the new CM13?
thanks,
Stefanos Constantinou

S.Constantinou said:
Hello all,
I have an LG G2 - D802 with CM-12.1 and TWRP as Recovery partition.
After the phone has undergone several software and one hardware bricks, I suppose there is something wrong with the phone's partitions because I cannot access the Recovery partition or the Download Mode when booting by using the key combination.
I found out by trying to do a clean flash of CM13 on the phone via TWRP and External memory via Mini USB - USB Memory stick and when I have deleted all partitions including the Internal Storage, System, Data, Cache & Dalvik Cache, I tried to flash the CM13+GoogleApps but then I have booted the phone I could see only the LG logo for a few seconds and then a black - on screen.
When I plugged the phone on my PC I could see a lot of partitions and I have followed a guide I found in the forum to unbrick. Then miraculously the phone had booted into the TWRP recovery without pressing any key combination. After that, I have restored to my precious backup.
Specifically then I'm trying to boot to Download Mode (to flash the Official LG Firmware and unroot), I turn the phone off, I press the Volume Up + Power, then when I see the LG logo I unpress and press the Power button but the phone keeps booting to my CM12.1 OS.
The same occurs when I 'm trying to boot to the Recovery parition (TWRP), however I can boot there via the CM's advanced reboot menu.
The reason I wanted to flash the Official Firmware and unroot is because I thought it will bring the Recovery and Download mode back..
How can I flash the correct images for the Download Mode and Recovery mode on the phone?
Also should I leave the Internal Storage intact instead of formatting via TWRP before I flash the new CM13?
thanks,
Stefanos Constantinou
Click to expand...
Click to collapse
have you tried quick reboot app.?
if its missing you can try skr tools. if not then you must go back to stock..

raptorddd said:
have you tried quick reboot app.?
if its missing you can try skr tools. if not then you must go back to stock..
Click to expand...
Click to collapse
hi,
thanks for replying..
the quick reboot app can boot into Download Mode only for Samsung devices and do you mean SRK tool?
that's how I have unbricked my phone the other day when it showed all those partitions when I got it bricked..
so how can I use it to reflash the download mode and make the combination work?
also how can I go back to stock if I cannot enter the download mode?
and will the partitions be created if I'm using the download mode to flash the stock firmware?

S.Constantinou said:
hi,
thanks for replying..
the quick reboot app can boot into Download Mode only for Samsung devices and do you mean SRK tool?
that's how I have unbricked my phone the other day when it showed all those partitions when I got it bricked..
so how can I use it to reflash the download mode and make the combination work?
also how can I go back to stock if I cannot enter the download mode?
and will the partitions be created if I'm using the download mode to flash the stock firmware?
Click to expand...
Click to collapse
I use quick reboot to boot into recovery....
yes srktools
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
not sure how but it has nuke download so it can enter download mode.
i think when using flash tools it wipes everything and installs everything needed..
so you must try the srk nuke download. i have no idea how to use. i only know you can try that or.. a search for a way to get download mode...if you get error 9006 i think then you need to short circuit the motherboard to get download mode..

raptorddd said:
I use quick reboot to boot into recovery....
yes srktools
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
not sure how but it has nuke download so it can enter download mode.
i think when using flash tools it wipes everything and installs everything needed..
so you must try the srk nuke download. i have no idea how to use. i only know you can try that or.. a search for a way to get download mode...if you get error 9006 i think then you need to short circuit the motherboard to get download mode..
Click to expand...
Click to collapse
I have been there my friend, that was my Hardware Brick; I had a black screen and I had to short the circuit to get all those partitions back, then I could see all the partitions and reflash all the img via Linux.
Maybe I will try the SRK tool..

S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app

mriyaan said:
S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

mriyaan said:
S.Constantinoue bro how did u shortcircuit ur motherboard ? i have the same issue.. i donno the procedure to shortcircuit.. would u let me know the procedure for it..
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
raptorddd said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
hello guys, I have used the URL raptorddd has posted!
also I have posted a reply with screenshots I have made during the procedure:
there is my reply post :
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404/post58490267#post58490267
have a look at this video https://www.youtube.com/watch?v=8ZD98phYTsM and this one https://www.youtube.com/watch?v=8ZD98phYTsM
but I have shorted the part on the motherboard the guide shows and not the one in the videos

Huawei P8 BootLoop

Good, which happens is that it tries to install a rom official to my huawei from ADB, I made the process with his due steps and the imgs (BOOT, CUST, SYSTEM, RECOVERY) on having finished of flash the SYSTEM.img, restart it and still has me in the logo and it returns to restart (Infinite restart) and it does not leave me to enter to recovery, not to the menu of update.
Sorry for my english, Thanks :good:

What full firmware version were you on previously, before trying to install the official rom? Give the full format: GRA-xxxxCxxxBxxx.
What version of the official rom are you trying to flash now? Again, give the full format as above. Also, is it a full version rom or an OTA update?
In what order are you flashing the extracted files? Try in this order: 1. boot, 2. recovery, 3. system (don't flash custom). After flashing the 3 files, boot into Recovery mode, then do a factory reset & cache wipe.

VNS-L31 Soft Bricked ?

Hi,
I tried to update my VNS-L31C432 from the B130 version to the B161 version through huawei firmware finder app and for whatever reason my phone is stuck now the bootanimation... I waited like 30 minutes but it get stuck to the bootanimation. I can access to the fastboot mode and to the Huawei recovery so what should i do know to get it back to life ?
Thank you for help

Quens said:
Hi,
I tried to update my VNS-L31C432 from the B130 version to the B161 version through huawei firmware finder app and for whatever reason my phone is stuck now the bootanimation... I waited like 30 minutes but it get stuck to the bootanimation. I can access to the fastboot mode and to the Huawei recovery so what should i do know to get it back to life ?
Thank you for help
Click to expand...
Click to collapse
A lot of users have complained about the efficacy of that application, it lead to too many bootloops.
But in your scenario you need to do a factory reset by holding "volume up + power button" till you see huawei logo.....you'll lose all data on internal storage including any previously installed, or updated apps.
_New World Order (NWO)_

[email protected] said:
A lot of users have complained about the efficacy of that application, it lead to too many bootloops.
But in your scenario you need to do a factory reset by holding "volume up + power button" till you see huawei logo.....you'll lose all data on internal storage including any previously installed, or updated apps.
_New World Order (NWO)_
Click to expand...
Click to collapse
I tried to do factory reset but when i got into huawei recovery i have no option to factory reset and if i do volume up + power button without plugged to my PC it install me a software package ... Should i try to install TWRP via fastboot to factory reset ?

Quens said:
I tried to do factory reset but when i got into huawei recovery i have no option to factory reset and if i do volume up + power button without plugged to my PC it install me a software package ... Should i try to install TWRP via fastboot to factory reset ?
Click to expand...
Click to collapse
Volume up + power button, should NOT install you any package at all, it has to go to either custom or stock recovery,I will assume that you're not touching the volume down at the same time while you're doing this right?
Edit:
Updating from to B161 via dload method must have reinstalled the factor recovery, so this is where you can find the factory reset option.
But if you do choose to install a custom recovery, voiding warranty temporarily, you need Meticulus TWRP for marshmallow since it's ur base system, this you can install via fastboot after unlocking it.
_New World Order (NWO)_

[email protected] said:
Volume up + power button, should NOT install you any package at all, it has to go to either custom or stock recovery,I will assume that you're not touching the volume down at the same time while you're doing this right?
_New World Order (NWO)_
Click to expand...
Click to collapse
Ok i managed to go into it but factory reset failed at 5%..

Quens said:
Ok i managed to go into it but factory reset failed at 5%..
Click to expand...
Click to collapse
Use TWRP to factory reset, if that fails too, get the recovery file from the update package, extract just this file, then install it via TWRP by installing/flashing file(*.img) instead of zip, find this button in TWRP, just tap it to change to file and browse for the recovery.img, then after go to stock recovery by selecting reboot to recovery in TWRP...then try again to factory reset, if that file don't work Or fails, I'll send you my VNS-L31 MM Stock recovery for B161, of this is your device too, then you'll lemme know.
_New World Order (NWO)_

[email protected] said:
Use TWRP to factory reset, if that fails too, get the recovery file from the update package, extract just this file, then install it via TWRP by installing/flashing file(*.img) instead of zip, find this button in TWRP, just tap it to change to file and browse for the recovery.img, then after go to stock recovery by selecting reboot to recovery in TWRP...then try again to factory reset, if that file don't work Or fails, I'll send you my VNS-L31 MM Stock recovery for B161, of this is your device too, then you'll lemme know.
_New World Order (NWO)_
Click to expand...
Click to collapse
So I successfully unlocked bootloader and installed back TWRP however i can't make fully factory reset as TWRP fail to mount /data when i do factory reset (and i can't even mount my data through MTP on TWRP). Should i tried to flash another package like full b150 through dload or i absolutely need to try factory reset on stock recovery ?

Quens said:
So I successfully unlocked bootloader and installed back TWRP however i can't make fully factory reset as TWRP fail to mount /data when i do factory reset (and i can't even mount my data through MTP on TWRP). Should i tried to flash another package like full b150 through dload or i absolutely need to try factory reset on stock recovery ?
Click to expand...
Click to collapse
To mount data go to swipe, advanced swipe, select data partition only, then change filesystem, then select f2fs, then repeat this but NOW selecting ext4, then flash what you need to , to the data partition, if this is leads to boot loop after, then reinstall stock recovery then factory reset, then you'll b good
_New World Order (NWO)_

[email protected] said:
To mount data go to swipe, advanced swipe, select data partition only, then change filesystem, then select f2fs, then repeat this but NOW selecting ext4, then flash what you need to , to the data partition, if this is leads to boot loop after, then reinstall stock recovery then factory reset, then you'll b good
_New World Order (NWO)_
Click to expand...
Click to collapse
Yes i saw this on another thread but when i try to do it i don't have the f2fs option, only ext2/3/4/fat/exFat...