Database Users

Rogers galaxy s4 (SGH-I337M)

hey guys, how do i root a galaxy s4 (SGH-I337M) from rogers running 4.3 MK6?

Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800

zild8 said:
Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800
Click to expand...
Click to collapse
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?

i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att

zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.

WarbyParker said:
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.
Click to expand...
Click to collapse
same here ..

you should try xposed framework ,and wanam xposed .There a lot of xposed module and i can costumize touchwiz like i want,like maximize widget,wich allow me to click on a notification without having to unlock.For shure its a personnal choice.
But in omega you can choose the app that you want ,if you dont want xposed just unselect it ,it use aroma installer when you flash it,you can remove a lot of apps

dajj said:
same here ..
Click to expand...
Click to collapse
Goldeneye never lost compatibility with our phones, so not sure what kind of support you expect or require.? IB4STiD simply requested not to complain from Canadian side for known problems, like lack of 4.3 modem for our phone, which we now got.
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Sent from my SGH-I337M

Idan73 said:
Goldeneye never lost compatibility with our phones, so
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Click to expand...
Click to collapse
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322

It's in GE thread, first post, Canadian fix. Guess iB4STiD opened it up for us again.
But basically go to original development and whichever tw kernel you pick, follow the links to Canadian or T-Mobile compatible version. Kernel makers usually describe whether we have our own or we should use T-Mobile one
Sent from my SGH-I337M

zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?

Bleedos said:
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?
Click to expand...
Click to collapse
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.

dajj said:
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322
Click to expand...
Click to collapse
This is only relevant for GE versions 13/14. The latest is GE15. As already explained, just follow steps in 1st post. There is a section called 'Canadian install guide', can't miss it. The fix you flash after the rom is the kernel for our baseband (Step A). Easy as pie. Step B is optional, changes network icons from default to whatever your carrier uses (e.g., 4G to LTE).
I would recommend creating a backup of stock once rooted before flashing custom roms. Not sure if there's ever going to be a fix for resetting knox, but traditionally it was a good idea to have this in case you ever want to revert back to stock and unroot. Also backup EFS to be safe, for more info: http://forum.xda-developers.com/showthread.php?t=1308546. I personally had to use an app for that after updating, knox kept preventing me from connecting to the program but that was when OTA was launched, might work for you.

azuziel said:
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.
Click to expand...
Click to collapse
FYI I did it the easy way using the Cyanogen Installer.
Ended with CM10.2 and CWM 6.0.4.4.
Then I flashed CWM Touch 6.0.4.4 from CWM. Downloaded TWRP but did not try it.

mafioso345 said:
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?
Click to expand...
Click to collapse
Chaeck out this ROM. Nice and light. Quick with great battery.
http://forum.xda-developers.com/showthread.php?t=2537495

help me modify my galaxy s4 to make it work on wind
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
Hey, i'm new to XDA and i was just wondering if you know how to modify Galaxy S4, Canadian version (SGH-I337M) to make it work on WIND or you might know someone who can help me through this, phone was offically with rogers but now its unlocked and running android 4.3 on it, ill be really greatful if you could help me. waiting for your reply.
Thanks

[Q] SS 3.72 problem

I have an ATT Galaxy S4 and installed safestrap 3.72 no prob…flashed goldeneye no prob, used it for a cpl days then made a backup of it and tried to flash hyperdrive15 as directed by xda thread and when i rebooted just went black for a cpl mins and kept going back to safe strap so i tried to wipe again and install recovery first my golden eye backup(which i later learned was a no no on the stock rom) then my stock rom and getting i keep getting fail…something about unable to mount /system and /systemorig..so i tried advance wipe everything except extsd and also receive fail (unable to mount /system and /systemorig) only success is regular wipe but its not doing me any good. I know im a complete noob and probably did something stupid and also that you senior members hate stupid post here but please I really dont understand what happened....Also I have tried to flash golden eye rom over again and it is just going black and shutting off mid flash...I tried making a new rom slot to see if maybe i could just flash rom on new slot but no luck. I have looked EVERYWHERE and havent found anyone that has had this issue,lol which add to my feling of stupidity...ANY IDEAS???:crying:

omino323 said:
I have an ATT Galaxy S4 and installed safestrap 3.72 no prob…flashed goldeneye no prob, used it for a cpl days then made a backup of it and tried to flash hyperdrive15 as directed by xda thread and when i rebooted just went black for a cpl mins and kept going back to safe strap so i tried to wipe again and install recovery first my golden eye backup(which i later learned was a no no on the stock rom) then my stock rom and getting i keep getting fail…something about unable to mount /system and /systemorig..so i tried advance wipe everything except extsd and also receive fail (unable to mount /system and /systemorig) only success is regular wipe but its not doing me any good. I know im a complete noob and probably did something stupid and also that you senior members hate stupid post here but please I really dont understand what happened....Also I have tried to flash golden eye rom over again and it is just going black and shutting off mid flash...I tried making a new rom slot to see if maybe i could just flash rom on new slot but no luck. I have looked EVERYWHERE and havent found anyone that has had this issue,lol which add to my feling of stupidity...ANY IDEAS???:crying:
Click to expand...
Click to collapse
You did not mention your phone firmware but based on your post, your firmware might be NB1 or NC1 since you said that you successfully installed the safestrap 3.72.
You did not mention which version of GE you flashed but I guess that might be GE28 or later. If you did, those roms are based on KitKat (android 4.4.2)
You flashed the hyperdrive15 which is written for jelly beam (android 4.3) based on the rom for the MK2 firmware.
GE rom installation for safestrap did not mention to install the rom in the different slot, so I guess you installed the GE rom in the stock slot.
Hyperdrive15 installation for safestrap mentioned to create/switch slot so you may or may not install the rom in the stock slot.
As far as I know, safestrap 3.72 does not support extra rom slot other than the stock rom slot. It appears that hyperdrive instructions were written for the safestrap 3.71.
May be that was your mistake.
My suggestion been odin the stock rom that corresponding to your firmware. Use tworl root to get rooted.

sway8966 said:
You did not mention your phone firmware but based on your post, your firmware might be NB1 or NC1 since you said that you successfully installed the safestrap 3.72.
You did not mention which version of GE you flashed but I guess that might be GE28 or later. If you did, those roms are based on KitKat (android 4.4.2)
You flashed the hyperdrive15 which is written for jelly beam (android 4.3) based on the rom for the MK2 firmware.
GE rom installation for safestrap did not mention to install the rom in the different slot, so I guess you installed the GE rom in the stock slot.
Hyperdrive15 installation for safestrap mentioned to create/switch slot so you may or may not install the rom in the stock slot.
As far as I know, safestrap 3.72 does not support extra rom slot other than the stock rom slot. It appears that hyperdrive instructions were written for the safestrap 3.71.
May be that was your mistake.
My suggestion been odin the stock rom that corresponding to your firmware. Use tworl root to get rooted.
Click to expand...
Click to collapse
Thank you so much SWAY...that what i did and just started back over...you were right i was running nc1 and had GE35....so to explain the reason i used hyperdrive15 was bc i tried 17 and on first boot it stayed on boot animation for 30+mins so i figured something was wrong and shut it down...and i was also very confused bc it says to falsh correct compatibilty pack and the only one i found is for 15...am i wrong? is there one for 17 or do i just use the one for 15?...thank you again

omino323 said:
Thank you so much SWAY...that what i did and just started back over...you were right i was running nc1 and had GE35....so to explain the reason i used hyperdrive15 was bc i tried 17 and on first boot it stayed on boot animation for 30+mins so i figured something was wrong and shut it down...and i was also very confused bc it says to falsh correct compatibilty pack and the only one i found is for 15...am i wrong? is there one for 17 or do i just use the one for 15?...thank you again
Click to expand...
Click to collapse
I do not know much about the Hyperdrive since I am a GE user. Also, Hyperdrive 17 mentioned that it would work for the ATT phone but 17 is posted only the Verizon forum.
For the ATT phone with NC1 firmware the steps for flashing the custom rom involves - 1)flash the rom, 2)flash the NC1 kernel module and 3) flash the supersu.
The correct compatibility pack might be referring to the kernel module, I guess. In that case, the pack for 15 might be written for the MK2 kernel module and it might not work with your NC1 firmware.

sway8966 said:
I do not know much about the Hyperdrive since I am a GE user. Also, Hyperdrive 17 mentioned that it would work for the ATT phone but 17 is posted only the Verizon forum.
For the ATT phone with NC1 firmware the steps for flashing the custom rom involves - 1)flash the rom, 2)flash the NC1 kernel module and 3) flash the supersu.
The correct compatibility pack might be referring to the kernel module, I guess. In that case, the pack for 15 might be written for the MK2 kernel module and it might not work with your NC1 firmware.
Click to expand...
Click to collapse
Is the kernel module the att module that they say to flash to make sure wifi works or is it something else? if so any ideas on where i can find it?
again thank you for taking the time to help me...

omino323 said:
Is the kernel module the att module that they say to flash to make sure wifi works or is it something else? if so any ideas on where i can find it?
again thank you for taking the time to help me...
Click to expand...
Click to collapse
Yes. The kernel module is the att module needed to get WiFi working. It can be found after extracting the download from the deadly venom KitKat magic tool thread.

jmjoyas said:
Yes. The kernel module is the att module needed to get WiFi working. It can be found after extracting the download from the deadly venom KitKat magic tool thread.
Click to expand...
Click to collapse
thank you so much! okay so just to make completely sure...to flash hyperdrive17 just flash rom, flash module, and flash su?
Again thank you so much!

omino323 said:
thank you so much! okay so just to make completely sure...to flash hyperdrive17 just flash rom, flash module, and flash su?
Again thank you so much!
Click to expand...
Click to collapse
Yes. That should work.

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian

If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk

Thanks for the help-trying it out now. Will keep ya posted

freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978

Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:

rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me

potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk

rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates

potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk

potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

[newbie] galaxy s4 att UCUAMDL

hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:

Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..

HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?

I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2

sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.

MF3 would be the last three digits of your system software version

HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<

You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.

sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.

npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?

sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.

All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk

I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.

plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:

plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.

Cant Flash ROMs ??

I seem to be unable to successfully flash ROMs on my phone...
I am not sure what's going on.
Yes, I am rooted. Yes, I am flashing ROMs made for my phone, and flashing the appropriate firmware to match the ROM. Yes, I perform a clean flash by wiping everything first.
I have tried wiping cache/dalvik after flashing, still no luck. I have tried not flashing gapps, still nothing...
No matter what I do, it never boots. I sit at the Verizon screen for hours on end.
Any ideas?
G900V Verizon Samsung Galaxy S5

If it's any help, here is a list of ROMs I have tried...
Alliance
Jasmine
Eclipse
Optimal
MiUi
FreedomROM

sgirard1991 said:
If it's any help, here is a list of ROMs I have tried...
Alliance
Jasmine
Eclipse
Optimal
MiUi
FreedomROM
Click to expand...
Click to collapse
What build are you on? Do you have safestrap, flashfire?

Nk2. & I use safestrap
Sent from my SM-G900V using Tapatalk

sgirard1991 said:
Nk2. & I use safestrap
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Never heard of this. You might have flashed the wrong thing. We don't flash gapps with our Roms. Start over by using Odin to flash a full stock tar of NGC and root again.

I'll give it a try later. Thanks.

sgirard1991 said:
Nk2. & I use safestrap
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
If you're on NK2 then most of the Roms I read you flashed won't work on that build. After you flash a ROM built for OC4, like FreedomROM for example, you need to Odin over the OC4 firmware (which includes modem and kernel) to the device otherwise Roms won't start. Same thing goes for everyone other ROM with the firmware except it has to be for the respective build.

mrjiggywiggy said:
If you're on NK2 then most of the Roms I read you flashed won't work on that build. After you flash a ROM built for OC4, like FreedomROM for example, you need to Odin over the OC4 firmware (which includes modem and kernel) to the device otherwise Roms won't start. Same thing goes for everyone other ROM with the firmware except it has to be for the respective build.
Click to expand...
Click to collapse
Yeah, I've got that all figured out now. Never really had to do that with any other phones I've had, it was always just flash and go, never really messing with different firmware and whatnot. I have since tested 4 different ROMs and they have all flashed with success..
Thanks

Can a mod please mark this thread as answered/closed ? I got it all figured out. Thanks.