Hai ,
I downloaded my phones kernel source and compiled with some additional configuraton..
Now I got these files .vmlinuz,image,zimage,and a tar'ed archive of zimage with name kernel_......_.tar
how can I make odin flashable (or any how flashable) rom file from this?
I tried to make boot.img with mkbootimg and initrd extracted from original stock rom
Flashing was succes according to odin But It doesnt boot.
any one please help me
I also like to know is there any way turn off splash screen and see the debug msgs from kernel during boot?
Any one please help
My phone is galaxy young GT-S5360
Update:
I figured out that problem is not with the additional configuration options I given during kernel compilation.
Problem is with the tools (or incorrect usage of tools) .
I tried making boot.img with original kernel and initramfs and that also not worked (flashing was successful.but
Booting failed).
I don't have much experience in android.i only know some linux
Any one please help me
Please please please.......
Update:
Finally I think I found how to make boot.img from kernel(zImage).The problem was with the "--base-address" option in the mkbootimg toool. I found my device's base address from kernel configuration file (.config).
now , boot.img produced from the kernel which was extracted from stock rom works well.
but boot.img produced from my custom kernel boots,but nothing displys in the screen.
I dont know how to debug it . I cant even see the debug messages from the kernel
Any one knows any clues,hints or any thing regarding this please please help me
i dont know why any no one replay to my post.
I dont have privilege to post this question in developers thread.thats why i am asking it here
Is it a wrong way? I dont know.
Click to expand...
Click to collapse
Thank you sir to be the first succefully create custom kernel...
Far before anyone can create it...
I'm always waiting ur great work again into sgy device...
i found in internet the original zip file for Lenovo Ideatab A1000F and a recovery image with twrp v2,i didn't flash it yet,but,my question is : can u all out there,the developers,can use any of those files to make custom roms for this device ? i have actually no idea about making custom roms,but if all those files even with the trwp posibility to be installed on this device,might be able for 1 of u to make something more interesting this device too ?
If any,just write me back and i can send all those 2 zip files in case u can use it for that
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool
[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry
Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.
meizu os version
using os version? when you open ur m2 note bootloader? Thank you
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?
Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there
what about mx4 pro (Exynos 5430 Octa) ?
hello we are new to and TWRP custom rom ??
I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one
After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.
I want to flash a custom ROM such as some CM 12 or any other stable on this Micromax Canvas Fire 2(A104)but I cant access the custom recovery some way.
I need a method to install the custom rom via some tool or maybe adb or something i.e basically from PC.is it possible to install custom rom by pc anyway?
I know stock rom can be flashed with SP Flash Tool but same is not possible for Custom Rom's, I guess.
Any help appreciated.