Related
Hi guys,
I've researched a little bit with no positive results, and have a question: is there any what to add/enable/unlock bands for D800 and D801 versions?
My main device is the D800 (tried with CloudyG3, CloudyStock and now a D802 rom with D800 kernel) and recently bought a LTE plan in my country (carrier uses 3G 2100MHz and LTE 3), so my first question is: does it exists any way to enable LTE band 3 for AT&T D800? I've tried with 3845#*800 > LTE-Only > Modem Settings > LTE Band Selection and tapping Band 3, but there is no SUCCESS popup. Confirmed device is LTE/GSM/WCDMA enabled with *#*#4636#*#*
Now, tried with D801 (running stock 4.4.2 TMO D80120g) and I've no data at all, not even 2G data. I've wiped the device, replaced SIM, deleted/created APN, tried enabling same band with hidden menu and received SUCCESS popup but no results as well. Also tried 3845#*801 > WCDMA-Only > Modem Settings > Network Mode > tapping WCDMA 2100 or Automatic.
Summarising, can I add/enable LTE band 3 on D800 and WCDMA/UMTS 2100MHz to D801?
bump
I need 1800 Mhz to work on my T mobile LG G2
Im facing the same issue. my carrier's LTE is on 1800 Mhz but my T mobile LG G2 D801 needs to be enabled on this frequency i.e band 5, I have tried all the above tricks but to no avail. is there any other way apart form flashing a custom or international ROM? NEED HELP.
Bump... Please any help
same issue here....plz help!!!
anyone can help?????
Four things to note before proceeding...
1. This only works for users having vs985 model outside the US or not on verizon network.
2. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
3. May be you already know all the things in the post but it can be useful for beginners like me .
4. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
akki7636 said:
Three things to note before proceeding...
1. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
2. May be you already know all the things in the post but it can be useful for beginners like me .
3. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
Click to expand...
Click to collapse
Hi there, thanks for the info. What area are you in and where did you find what band you needed? I have tried numerous times with all the bootstacks and never had consistent 4G.
@mopartonyg
I'm in India and i just checked my career's website to know which band they are using. However in USA Verizon wireless uses Band12 as Primary Band and Band2 , Band4 as Secondary band to strengthen the signal in densely populated urban area. So if you are verizon user in USA band 12,4,2 must be activated. I can't say anything about consistency as it varies from place to place.
Actually Verizon uses band 13 for it's primary along with bands 4 and 2. Not having any luck getting data to work on Fulmics with this method. I select band 13 and band 4 (as band 2 is not in my area) yet even with that I still can't get data at all on Verizon with Fulmics.
same boat here... actually the only band I can get working is 4. I have to assume the design of the international rom with the band they are designed around, just don't play nice with our CDMA harware/modem partition. I would suspect that the international roms would require some engineering for them to really work properly. not sure if just porting them over and chaning settings is going to get the job done. perhaps someone more intelligent than I could share some light, but there certainly is a conflict with how these roms communicates across the CDMA bands in the US
Sent from my VS985 4G using XDA-Developers mobile app
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Oh... Glad to hear that buddy..
So i think my post is useful for only international users which are not on verizon wireless.
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
A couple of good approaches to the issue. Although it needs to be noted 4G is directly related to the band on each carrier (VZW, TMO, etc) See Below
Carrier 4G LTE Bands Frequencies
Verizon Wireless 2, 4, 13 1900, 1700 f, 700 c
T-Mobile 2, 4, 12 1900, 1700 def, 700 a
Sprint 25, 26, 41 1900 g, 850, 2500
Europe 3, 7, 20 1800, 2600, 800
If a specific ROM cannot be set to the correct bands above, it would make sense to me that Verizon wouldn't work in Europe on a stock VZW ROM. It would not be able to use the channels in Europe.
And vice versa, that Verizon wouldn't work in the states on an international ROM in the US. Whether the Verizon SIM is blocking that band, or the design of the ROM, would be a better question for the developers.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Warid's approved devices will definitely work with Warid's LTE network. For our "Warid LTE Approved' devices please visit the "Warid's LTE devices" section. You can also purchase LTE devices that support 1800 MHz (FDD-LTE Bands 3) from other sources. However, Warid doesn't take responsibility for these devices if they do not work on Warid's LTE network http://www.waridtel.com/lte/faqs
So it makes sense that if BAND 3 works international (see above) that you get 4G
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
AngryManMLS said:
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
Click to expand...
Click to collapse
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
akki7636 said:
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
Click to expand...
Click to collapse
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
+1
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
This is good to hear and I second that!
Looking forward to getting it fixed and use it as my daily driver. It would totally be worth a big donation, thanks to everyone working on making this available to so many.
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
b00ster23 said:
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
Click to expand...
Click to collapse
Cool buddy... I think our vs985 will be on 4g Speed very soon.
akki7636 said:
Cool buddy... I think our vs985 will be on 4g Speed very soon.
Click to expand...
Click to collapse
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 10b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 10b rom.
3. Wiped stock 10b and flashed the 10b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
netookska05 said:
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 12b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 12b rom.
3. Wiped stock 12b and flashed the 12b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
Click to expand...
Click to collapse
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
b00ster23 said:
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
Click to expand...
Click to collapse
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
netookska05 said:
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
Click to expand...
Click to collapse
So when you go into the About Phone>Network, does it say Verizon Wireless for the network?
Hello everyone! I recently got a second-hand verizon G2 VS980. I live in India (location is relevant in my case because of this being a US only model). I had ROOT pre-installed and it stays even after factory reset. This indicates that it is NOT stock.
This phone has legit hardware, as in it has all VS980 components. I have checked it. BUT IT HAS THE IMEI OF A D800. Does this mean that i also have the bands of D800 enabled?
Now what i want to do is,
Above all i want this phone rooted and flashed to the latest and most stable ROM atm.
Second, i would like to use 4G LTE on it, here in India. I know that VS980 supports only band 4 and 13. I NEED band 3,5,40. I have trawled the internet for this specific info but to no avail. Does the VS980 has the hardware it takes to use other 4G bands? Or is it manufactured only with band 4 and 13 in mind? The only pieces of little info i came upon was this
jacob019 said:
After spending a few days hacking around with the VS980 (LG G2 Verizon Model) I wish to share some findings.
1. NV edits to the bands will only work with baseband 11A or earlier. All later radios have the NV values hardcoded into the baseband and any changes will be reverted. You can successfully edit the NV values, and they will survive reboot on baseband 11A, but as soon as you install a later baseband they will revert to stock. CM11 works well with 11A. Perhaps binary modification to later basebands would be possible.
2. LTE Band 17 does not appear to be supported by the hardware. I copied all the values from a D801. Android now reports my phone as a GSM model instead of CDMA which is nice, but it just won't connect to LTE Band 17. If I delete band 4, I can't get LTE at all, so I know the settings are having an effect.
Click to expand...
Click to collapse
and this. So i am confused where to start, i currently have a 26A baseband. Is it possible to enable band 3,5 and 40 on VS980?
I found the guides much confusing and complex relative to other devices i had. I am confused what to do first.
Should i flash TWRP first? or
Should i flash stock firmware?
I see that bands can be edited only on baseband 11A or earlier, so should i downgrade to that etc.
I have the phantom touches, and i read that they were gone after a specific update, so can i still get/flash that update with
a 11A baseband?
I do not understand this baseband, bootloader, exploits, and ROM compatiblity things.
I am willing to try even low level edits if someone is able to help and guide me.
Lastly, i just want my VS980 to run a good stable ROM with (if possible) 4G LTE on band 3,5 and/or 20 (India) and NO phantom touches update.
Specs: attached
Bump. Noone?
Can't anyone tell me that does the verizon model even includes hardware capability for 4G band 3,5 and 20? If this gets cleared, more than HALF of my problems will be gone.
ankitkashyap said:
Bump. Noone?
Can't anyone tell me that does the verizon model even includes hardware capability for 4G band 3,5 and 20? If this gets cleared, more than HALF of my problems will be gone.
Click to expand...
Click to collapse
vs980 uses lte band 4 and 13. lte wont work for any other bands unfortunately
theobserver76 said:
vs980 uses lte band 4 and 13. lte wont work for any other bands unfortunately
Click to expand...
Click to collapse
This means that i can't enable/use other bands because the hardware does not exist for any band except 4 and 13. Yes?
ankitkashyap said:
This means that i can't enable/use other bands because the hardware does not exist for any band except 4 and 13. Yes?
Click to expand...
Click to collapse
yep
Thanks for clearing this out.
I've been looking for a good, inexpensive phone my partner can use on AT&T, T-Mobile and Verizon and I was able to snatch an unlocked VS995 in excellent condition for $70--it just needs the battery replaced soon which I also ordered. The main downside to this model if you're using it on AT&T and T-Mobile is that it doesn't support Band 12 and 17, but I know the US Unlocked variant does. I just received the phone today. I've been searching on the forum for an answer into if this is possible with the VS995 variant and I've seen people say it is using an LG V20 version of LGUP, but haven't found anyone that's confirmed they've been able to do it on the Verizon and not the AT&T variant and the steps they took to do so.
I want to stay on the stock ROM so I'm not looking to root and install a custom one. Is it possible to convert from the VS995 firmware to US996 so I can gain band 12 and 17 while removing the Verizon bloatware and staying on the stock ROM/OS? If so, would anyone one of y'all be kind enough to post the link to a guide or article that details how to do so? I reset the phone to factory settings so thankfully don't have to do a backup. After doing this, is it still possible to receive OTA updates and, if so, are they gonna mess anything up like reverting the phone to stock firmware or the phone's unlocked status?
Thank y'all so much in advance.
I have a vs995 and I flashed it with US996_usa and working great. You need to download the us996 usa version (2.3GB KDZ) at lg-firmwares dot com and flash it with LGUP PATCHED. There is video on Youtube giving detailed instructions. You will be able to find all these easily via google. I don't know how any of this works with the various US carriers or bands as I'm in europe.
DeyEatDaPooPoo said:
I've been looking for a good, inexpensive phone my partner can use on AT&T, T-Mobile and Verizon and I was able to snatch an unlocked VS995 in excellent condition for $70--it just needs the battery replaced soon which I also ordered. The main downside to this model if you're using it on AT&T and T-Mobile is that it doesn't support Band 12 and 17, but I know the US Unlocked variant does. I just received the phone today. I've been searching on the forum for an answer into if this is possible with the VS995 variant and I've seen people say it is using an LG V20 version of LGUP, but haven't found anyone that's confirmed they've been able to do it on the Verizon and not the AT&T variant and the steps they took to do so.
I want to stay on the stock ROM so I'm not looking to root and install a custom one. Is it possible to convert from the VS995 firmware to US996 so I can gain band 12 and 17 while removing the Verizon bloatware and staying on the stock ROM/OS? If so, would anyone one of y'all be kind enough to post the link to a guide or article that details how to do so? I reset the phone to factory settings so thankfully don't have to do a backup. After doing this, is it still possible to receive OTA updates and, if so, are they gonna mess anything up like reverting the phone to stock firmware or the phone's unlocked status?
Thank y'all so much in advance.
Click to expand...
Click to collapse
As far as I'm aware, cross-flashing firmware on the V20 won't give you any additional frequency bands unlike some other phones, so you're still limited to what the VS995 has from the beginning. From what I've read, US996 firmware works fine on Verizon except for a few features such as WiFi calling and video calling.
As for AT&T and T-Mobile, you won't get VoLTE or WiFi calling along with the missing LTE bands, so, depending on where you live, overall coverage could be significantly worse than having the H910 (AT&T) and H918 (T-Mobile) models, respectively. Not having VoLTE would be a problem if you were in an LTE-only area without roaming because then you'd have no way to make or receive phone calls.
ezzony said:
I have a vs995 and I flashed it with US996_usa and working great. You need to download the us996 usa version (2.3GB KDZ) at lg-firmwares dot com and flash it with LGUP PATCHED. There is video on Youtube giving detailed instructions. You will be able to find all these easily via google. I don't know how any of this works with the various US carriers or bands as I'm in europe.
Click to expand...
Click to collapse
Thank you for the info. Are you referring to this video? I'd watched it before but it's for flashing the stock ROM on a US996 variant and the links in the description don't work.
C D said:
As far as I'm aware, cross-flashing firmware on the V20 won't give you any additional frequency bands unlike some other phones, so you're still limited to what the VS995 has from the beginning. From what I've read, US996 firmware works fine on Verizon except for a few features such as WiFi calling and video calling.
As for AT&T and T-Mobile, you won't get VoLTE or WiFi calling along with the missing LTE bands, so, depending on where you live, overall coverage could be significantly worse than having the H910 (AT&T) and H918 (T-Mobile) models, respectively. Not having VoLTE would be a problem if you were in an LTE-only area without roaming because then you'd have no way to make or receive phone calls.
Click to expand...
Click to collapse
Hmm, where did you read that? From what I've read the hardware/modem in the VS995 and US996 version is the same and therefore the difference only comes down to the carrier firmware artificially disabling bands the device supports just like it is on many other smartphones. I could be wrong, but one way to find out would be to do it myself and then try to connect to a Band 12 or 17 tower.
WiFi calling and video calling I'm totally fine with not having. Never used or needed them. With AT&T and Cricket I've never not had service and with Metro the couple times I haven't had T-Mobile service roaming has kicked in and saved the day. Thank you for the info.
DeyEatDaPooPoo said:
Hmm, where did you read that? From what I've read the hardware/modem in the VS995 and US996 version is the same and therefore the difference only comes down to the carrier firmware artificially disabling bands the device supports just like it is on many other smartphones. I could be wrong, but one way to find out would be to do it myself and then try to connect to a Band 12 or 17 tower.
WiFi calling and video calling I'm totally fine with not having. Never used or needed them. With AT&T and Cricket I've never not had service and with Metro the couple times I haven't had T-Mobile service roaming has kicked in and saved the day. Thank you for the info.
Click to expand...
Click to collapse
Here's some frequency band info for both the VS995 and US996:
VS995
US996
I'm pretty sure this is a hardware difference, and no firmware change will be able to add more band support unlike some other phones you may have heard about (such as recent U.S. models of Samsung phones). Otherwise, there would have been plenty of discussions and guides around here regarding this (and FWIW, I happen to own a US996, LS997, and H918).
As for LTE Band 12 on the T-Mobile network, only phones that are certified by T-Mobile will be able to access it (more info on compatible phones here). So even though a US996 has the hardware for connecting to Band 12, you wouldn't be able to use it since T-Mobile has blocked access to it and only allows it for the H918 model.
Based on all this, I would expect a VS995 to get LTE Bands 2, 4, and 5 on AT&T and T-Mobile. Of course, since you already have the phone, there's only one way to find out. Just make sure you carefully read the guides/procedures about using LGUP for cross-flashing, and absolutely stay away from any H918 firmware (it will instantly kill any V20 that is not an actual H918). Not sure if there even is a separate guide around here as it is usually mentioned in the initial steps of different rooting guides for each V20 model, but you can find the patched LGUP that ezzony mentioned in this thread (you may have to move the DLL file to a specific folder location for it to work properly).
C D said:
Here's some frequency band info for both the VS995 and US996:
VS995
US996
I'm pretty sure this is a hardware difference, and no firmware change will be able to add more band support unlike some other phones you may have heard about (such as recent U.S. models of Samsung phones). Otherwise, there would have been plenty of discussions and guides around here regarding this (and FWIW, I happen to own a US996, LS997, and H918).
As for LTE Band 12 on the T-Mobile network, only phones that are certified by T-Mobile will be able to access it (more info on compatible phones here). So even though a US996 has the hardware for connecting to Band 12, you wouldn't be able to use it since T-Mobile has blocked access to it and only allows it for the H918 model.
Based on all this, I would expect a VS995 to get LTE Bands 2, 4, and 5 on AT&T and T-Mobile. Of course, since you already have the phone, there's only one way to find out. Just make sure you carefully read the guides/procedures about using LGUP for cross-flashing, and absolutely stay away from any H918 firmware (it will instantly kill any V20 that is not an actual H918). Not sure if there even is a separate guide around here as it is usually mentioned in the initial steps of different rooting guides for each V20 model, but you can find the patched LGUP that ezzony mentioned in this thread (you may have to move the DLL file to a specific folder location for it to work properly).
Click to expand...
Click to collapse
Yes, but the Frequency Check website only looks at firmware differences, not the internal hardware. I decided to do some further digging and went to the source that tests these (the FCC) and found that the VS995 and US996 have the same ZNFVS995 FCC ID meaning they share the same internal hardware. Verizon just decided they wanted to be arseholes and cripple the phone's band support in their firmware so it wouldn't work to the best of its abilities on T-Mobile's and AT&T's network. Similarly, T-Mobile decided to also be arseholes by artificially limiting Band 12/VoLTE support to their own H918 model only. I hate that carriers are able to get away with this BS. It is incredibly anti-consumer and infuriating. If the hardware supports XYZ then it should be enabled and capable of taking advantage of it. The FCC tested Band 12/17 to work properly on these and says regarding the device's capabilities:
This device contains the following capabilities: 850/1900 CDMA (BC0, BC1), 850/1900 GSM/GPRS/EDGE, 850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n/ac WLAN, 802.11a/n/ac UNII, Bluetooth (1x, EDR, LE), NFC LTE Band 12 (698 - 716 MHz) overlaps the entire frequency range of LTE Band 17 (704 - 716 MHz). Therefore, test data provided in this report covers Band 17 as well as Band 12. LTE Band 25 (1850 - 1915 MHz) overlaps the entire frequency range of LTE Band 2 (1850 - 1910 MHz). Therefore, test data provided in this report covers Band 2 as well as Band 25. LTE Band 66 (1710 - 1780 MHz) overlaps the entire frequency range of LTE Band 4 (1710 - 1755 MHz). Therefore, test data provided in this report covers Band 4 as well as Band 66.
Click to expand...
Click to collapse
Seriously, f*ck both Verizon and T-Mobile. Thankfully I'm starting my Cricket/AT&T service in a week so I'll be able to test if it can pick up and use Band 12/17. You happen to know of any app or way to force/limit the device to only using one specific LTE band? Thank you so much for linking to that thread for flashing these using LGUP. I'll make sure to follow it and to download the US996 (US Unlocked, not US Cellular) firmware and post a small update on my findings. Thank you so much for all the info. Really appreciate it.
DeyEatDaPooPoo said:
You happen to know of any app or way to force/limit the device to only using one specific LTE band?
Click to expand...
Click to collapse
While I've never tried this, have a look at this old thread on LTE band selection from a hidden menu. The dialer code differs by model, so for a VS995 it would be *#546368#*995# and for a US996 *#546368#*996#. The code works for my US996 and H918 on Oreo but not for my LS997 on Nougat (for which there is a separate APK file to access the hidden menu). There are lots of submenus and items in there, so be sure not to accidentally change settings that you're not supposed to.
ezzony said:
I have a vs995 and I flashed it with US996_usa and working great. You need to download the us996 usa version (2.3GB KDZ) at lg-firmwares dot com and flash it with LGUP PATCHED. There is video on Youtube giving detailed instructions. You will be able to find all these easily via google. I don't know how any of this works with the various US carriers or bands as I'm in europe.
Click to expand...
Click to collapse
Hello
You crossflash with which android version 9 or 8
If android 9 whats the battery backup (good/bad)
Does the android 9 has a darkmode
Does it brings back or activate the FM radio ?
Thanks
mariowinax said:
Hello
You crossflash with which android version 9 or 8
If android 9 whats the battery backup (good/bad)
Does the android 9 has a darkmode
Does it brings back or activate the FM radio ?
Thanks
Click to expand...
Click to collapse
Android 8.
I know Android 9 does not have FM radio because Android 9 is only available for the Korean variant (F800) and it never had FM in the first place.
ezzony said:
I have a vs995 and I flashed it with US996_usa and working great. You need to download the us996 usa version (2.3GB KDZ) at lg-firmwares dot com and flash it with LGUP PATCHED. There is video on Youtube giving detailed instructions. You will be able to find all these easily via google. I don't know how any of this works with the various US carriers or bands as I'm in europe.
Click to expand...
Click to collapse
I have heard about converting a vs995 to a us996. How do you do this i have a vs995 and patched lg up do i use the upgrade option or partion dl?
Thanks,
ROMSG
ROMSG said:
I have heard about converting a vs995 to a us996. How do you do this i have a vs995 and patched lg up do i use the upgrade option or partion dl?
Thanks,
ROMSG
Click to expand...
Click to collapse
DL partition ignores model codes ...so DL Partition.
ezzony said:
DL partition ignores model codes ...so DL Partition.
Click to expand...
Click to collapse
Thanks, now it gives me a partition selection which partitions do i select or do i select all of them?
ROMSG said:
Thanks, now it gives me a partition selection which partitions do i select or do i select all of them?
Click to expand...
Click to collapse
All of them seems to work fine.
Will this work in terms of flashing us unlocked firmware or my Verizon LG v20 (vs995) I rooted it successfully, but when I flash these firmware files, the phone is in a bootloop. US996 twrpable zips
Hi there. I bought an 'unlocked' AT&T H910 LGV20 from ebay.
I thought would work in the UK as the phone hardware has compatible 4g bands that my provider (EE) uses.
The stock at&t firmware only allowed me to use 2g/Edge.
So I have flashed several other roms / kdz files using LGUP
( h910 Puerto Rico, H915 Canada, US996 unlocked US - variety of android 7 and android 8)
Some roms (particularly Android 7.0 Canada and Puerto Rico) work with 2g and 3g but there isn't even a 4G option in the base menus.
Some roms have global or allow you to select LTE/3Gpp but they don't allow me to get a 4g signal.
One even said 4g at the top but when I checked the connection in phone settings - about - it showed 3g (and this was consistent with the download speed too)
II only got videotron Canada to work. Bell and Rogers should have an overlapping 4g band but I got the CUST error on those roms.
I have tried going through service menu but all that can do is sometimes force a 3g signal from 2g
So what should I do?
1. I s there a rom with overlapping 4g bands that would work? Can I flash a HK rom onto H910?
2. Can I root the phone to unlock 4g bands?
Would this survive unrooting to allow me to access microsoft intune (for work email), banking and sports apps (which sometimes don't like root?)?
3. Would a custom rom work? Which do you recommend to keep as many features as possible eg remote control, camera, DAC?
Do they also work with microsoft intune, banking apps, sports apps etc?
I have followed a few of the posts out there but given the ebay seller I wonder if a few more people in Europe might have been tempted!
Thanks!
Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.
Stransky said:
Hi
You need Band 20 (800) to use with EE UK and according to GSM Arena list of specs for the H910 that version of the V20 does not have it and I do not know if it can be added.
Click to expand...
Click to collapse
Thank you!
I was led to believe the H910 (same as H915 in Canada) supported all of EE's 4g bands.
But for sure, the carriers seem to have locked some out. But not having any luck with other roms either...
I cannot post the url but
frequencycheck . com
carrier-compatibility/wwW4hXP/lg-h910-v20-lte-a-h915/ee-everything-everywhere-united-kingdom
Compatibility - 3 out of 3 bands supported
100%
Interface Name Supported by device?
LTE B3 (1800 +) Yes
LTE B7 (2600) Yes
LTE B20 (800 DD) Yes
As I said in previous post the H910 does not support Band 20 (800) check GSM Arena site select LG V20 and then H910 and select LTE bands and you will see that Band 20 is missing. The H915 is not listed.
Sent from my iPad using Tapatalk
@jamescarrick
I have a similar issue, having bought an "unlocked" H910 and having only 2G. Is this the file name of the H915 kdz file you flashed to enable 3G: "H91510e_00_VTR_CA_OP_1205.kdz"?
Thanks.