Related
afternoon all
would like the lock screen make a sound when you brush it down with your finger ,
does any body know if its posable to do ?
HI,
I'm very sorry for that lame question but could anyone explain to me how to get to blackstone build in keylock/screenlock settings ? please..
I looked in user manual and I've done my research but looks like I can't find anything.
regards,
looks like no one is sure about it or there is no such a options.,
For those who use s2u2 and are annoyed about double screen lock when you take the pen out of the hd and system lock turns on, try to instead of putting back stylus in when screen is on ,turn it off and then put stylus back, turn screen on and there you go.. untill you take stylus out again there will be no double lock. You just have to remember to put it back when the screen is off and it will work great.
hope that helps.
Hi guys,
I am having screen protector drama: I am trying to remove a non silicon screen protector (and I know its on there. good at that!) but I can't remove it.
I've tried scotch tape, duct tape, mach 3 razer blades...trying to lift up that corner.
I have to remove this thing because it is what I am suspecting is messing with my Proximity Sensor, and causing the screen to blank when making calls. Also, Z-DeviceTest reports my Proximity is 0.00000 cm , when the screen is just on normally.
*i might try the hex edit trick to turn off the sensor after this, if I fail. Although that would suck kind of, because then my head will press buttons during calls..AND, hex editing the appropriate file with androids hex edit, didn't help me find the string, the last time i tried.
That being said, I'm using a pin and a flash light, and want to know if i am pulling at something inherent to the phone or not.
On your Nexus one, is there a black rubbery ring around the screen, between the edge of the screen and the grey. Is it like 1mm thick? (everytime I pin and pull up, i tear this string like rubber grommet, and i'm wondering if its the screen protector excess that oversits the screen, or something the nexus one has around its blank screen?
Please help.
ThankS!
I do see a thin black ring between the screen and the metal.
If you're really sure there's a screen protector on there, maybe try a tiny dot of superglue on some tape to increase the sticking power?
Aww, thank you sir.
I guess I've been tearing up my phone then.
I will try the super glue, but what should I stick onto it? <string?>
ive never had a screen protector that stuck on are you sure there is even one on there? those things peel right off
Hrmmm....
Well its a Clarivue... these things look like glass.....
Well, I used the solution described here, with the hex editing http://forum.xda-developers.com/showthread.php?t=985223
Altering sensors.mahimahi.so solved the phone screen going blank issue, but auto rotate stopped working.
Replaced the file with original, rebooted, and for some reason, still couldnt auto rotate.
Now doing a Nandroid restore. Hoping it auto rotates again.
This screen off issue during call seems like a GB issue. Restoring an earlier CM7 backup, and hoping to find an alternate dialing app...
Found a fix. somewhat
(The nandroid backup restored auto rotation incidentally)
You go into the dialer, and change preferences to disable Haptic feedback.
The screen still may go blank on dialing, but easily awakes now by either pressing the power button or trackball. No one button seems to do it consistently, but its one of those two consistently now.
Thanks for your help guys. Minor pin damage
Still no fix for the Proxmity Sensor GB/CM7 bug.
Any suggestions? I tried Screen Suite as recommended in another thread. No go.
Hello, been visiting the boards for a long time, but I didn't register because I had nothing to contribute really. <.<
I currently have a i9505 running on cm13 6.0.1.
Last night when I wanted to reply to a text I used the right side lock screen shortcut that's set to messaging the circular motion thingy messed up the edge of my screen. (I didn't realize until later that it's not actually a hardware issue if you ask me.)
Some pictures, screenshots don't register anything:
CAN'T POST IMAGES because I'm a new user. :/
It's on imgur, with /a/Murqy extension after .com. Album of three images.
Messaging shortcut thingy on the second screen is a lock-screen burn in, as is lock screen in the middle of the first screen.
Sorry for the garbage quality screens, I don't have any other spare phone except for the ancient Sony Ericsson with me atm.
At first this obviously looks like some display issue or a burn-in. I've checked the display, it has absolutely no scratches.
I've also read about the quality issues of some S4 phones and glass+display being glued together which can lead to yellowish tint. And how display breaks easily because of bad build quality and too much pressure being put on the display itself.
Anyhow, ever since that brown/yellow thing appeared the right/left lock screen shortcut animations stopped showing. And that thing is the exact size of the lock screen shortcut animation.
Also, those three burned in lock screen buttons, phone/unlock/messaging aren't really burn ins. When I try to press any of them in the bugged state when the screen is already unlocked, the dropdown menu activates. Also when I use dropdown menu myself, those 3 buttons are instantly gone without leaving a trace. And when the dropdown menu is activated, the yellowish corner translates from the background to the menu itself. Icons on the home screen in the background aren't yellow anymore, but icons in the dropdown menu are.
So, I'm completely at loss what to do here. I don't wanna use one of those burn in removal apps to mess my phone up, I don't have a warranty because I got it used like less than a month ago and everything was working fine. And I don't wanna take it to a repair shop because they'll just tell me the display is messed up.
There's just too much coincidence here for me to believe it's a classic case of display burn in.
Why wouldn't lock screen shortcut animations show up anymore if that was the case? Even on the left side which is completely fine. And it just appeared out of nowhere when I used one of those shortcuts. As if animation is stuck in there.
Sorry for the wall of text, but wanted to explain it in detail as I couldn't find anything similar anywhere else. <.<
Perke- said:
Hello, been visiting the boards for a long time, but I didn't register because I had nothing to contribute really. <.<
I currently have a i9505 running on cm13 6.0.1.
Last night when I wanted to reply to a text I used the right side lock screen shortcut that's set to messaging the circular motion thingy messed up the edge of my screen. (I didn't realize until later that it's not actually a hardware issue if you ask me.)
Some pictures, screenshots don't register anything:
CAN'T POST IMAGES because I'm a new user. :/
It's on imgur, with /a/Murqy extension after .com. Album of three images.
Messaging shortcut thingy on the second screen is a lock-screen burn in, as is lock screen in the middle of the first screen.
Sorry for the garbage quality screens, I don't have any other spare phone except for the ancient Sony Ericsson with me atm.
At first this obviously looks like some display issue or a burn-in. I've checked the display, it has absolutely no scratches.
I've also read about the quality issues of some S4 phones and glass+display being glued together which can lead to yellowish tint. And how display breaks easily because of bad build quality and too much pressure being put on the display itself.
Anyhow, ever since that brown/yellow thing appeared the right/left lock screen shortcut animations stopped showing. And that thing is the exact size of the lock screen shortcut animation.
Also, those three burned in lock screen buttons, phone/unlock/messaging aren't really burn ins. When I try to press any of them in the bugged state when the screen is already unlocked, the dropdown menu activates. Also when I use dropdown menu myself, those 3 buttons are instantly gone without leaving a trace. And when the dropdown menu is activated, the yellowish corner translates from the background to the menu itself. Icons on the home screen in the background aren't yellow anymore, but icons in the dropdown menu are.
So, I'm completely at loss what to do here. I don't wanna use one of those burn in removal apps to mess my phone up, I don't have a warranty because I got it used like less than a month ago and everything was working fine. And I don't wanna take it to a repair shop because they'll just tell me the display is messed up.
There's just too much coincidence here for me to believe it's a classic case of display burn in.
Why wouldn't lock screen shortcut animations show up anymore if that was the case? Even on the left side which is completely fine. And it just appeared out of nowhere when I used one of those shortcuts. As if animation is stuck in there.
Sorry for the wall of text, but wanted to explain it in detail as I couldn't find anything similar anywhere else. <.<
Click to expand...
Click to collapse
I'm not familiar with burn-ins, but since it's a used phone the probability of the screen being messed up is high.
If it really is a software glitch, the only option would be to flash a different rom. If it continues, flash a stock rom via Odin. If the problem still persists, then it's most probably a hardware issue.
Remember, the flashes have to be clean flashes. As clean as possible. Dirty flashes won't help, especially when trying to find the root of a problem.
I've had it for nearly a month now and I didn't have a single issue.
As I've said, it's probably not a burn in because it just appeared like that due to one animation.
And since it's also there when I boot into recovery I don't think flashing a new ROM would help.
..
MuF123 said:
http://i.imgur.com/j4t9fEA.jpg
Is this gradient (around the icon) visible to naked eye? This is really nasty Just a guesswork: this could be one of failure modes for amoled. I have 8 weird rectangles burned in over the whole screen and really don't know where they came from.
Check this: http://forum.xda-developers.com/showthread.php?t=2603039 evidently even light from outside can burn in your screen.
Click to expand...
Click to collapse
Yea, it's visible.
That's the far right shortcut on the dock.
But the weird thing is that it just disappears if I try to click it.
Same goes for the lock screen shortcuts as I've said already, that's why I'm not sure it's a regular case of screen burn.
And when I pull down the dropdown menu, the color of the desktop goes back to normal, but dropdown menu icons in the bottom right turn yellowish, as if the tint translated to the screen that's being used at that moment.
After I realized that I tried to mess around with color saturation and brightness.
Changing brightness had no effect, lowering it would just make that corner darker, but as I dropped down color saturation on all of the RGB components more and more it became less and less noticable.
But the buggy lock screen shortcuts still puzzle me. They remain on the desktop after I unlock the phone, but are instantly gone as soon as I click them.
If it wasn't for that, I'd be pretty sure the screen broke because of bad build quality. I read about the display having too much pressure put on it, somewhat of a design flaw.
Gonna try that burn in app, what's the worst thing that could happen to a broken display. <.<
..
MuF123 said:
Does it disappear if you press and hold without actually doing something? Make a screenshot and display the image fullscreen as if it was lockscreen, will it happen again? While showing the screenshot, press and hold on the icon, any change?
Does all of the gradient disappear or just the icon burn in?
Click to expand...
Click to collapse
If I hold it, it actually works (eg taking me to messages or phone menu as if the screen was locked). It doesn't appear on screenshot, only after I unlock the phone. That's what's puzzling me, it's not actually burned in, it looks like an issue with the display when I change screens (from locked to unlocked or switching from desktop to broswer like in that screenshot with the burned in icon, as soon as I click it it also disappears, same as shortcuts).
And gradient gradually disappears as I lower the color saturation. Disappears fully at around 30% for all RGB components. But brightness is way too low then.
..
MuF123 said:
I know, I just wanted you to make your phone display the same content as if it was locked - but now the image would be screenshot and not the actual lockscreen... I know this sounds really wild, but I don't see any better troubleshooting ideas here
Click to expand...
Click to collapse
I get your point, like I'm leaning towards display issue but not a classic one but a weird one because it has issues with switching screens.
Idk, I'm gonna roll with this for a couple more days, if it gets worse it's definitely the display.
..
MuF123 said:
Just out curiosity - maybe you could make a video how this behaves
Click to expand...
Click to collapse
Maybe tomorrow if I find a half-decent camera.
Actually, I made a screencast.
https://media.giphy.com/media/3oGRFj88fgqgT3vWrS/giphy.gif
As you can see, after I unlock the screen, all three shortcuts are burned in.
When I press the burned in unlock icon it just briefly opens the dropdown menu (it wasn't me opening it at that point, when I clicked the lock screen icon in the middle)
Yellow tint in the bottom can't be seen on the video.
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
To be honest, sounds like the Nothing Phone isn't the right device for you.
I like to know the answer to question 1 too.
Jelle99 said:
Hello all!
My Razer Phone 2 stopped charging. This is how my Razer Phone 1 also died, basically the charging port went bad, then worse, then died completely.
Anyway I got the Nothing instead, since price and specs fit me pretty fine.
However I want to change a few things. I might be blind in the settings menu, but I'm hoping you'll still help me!
I got a few points I'd like changed, and no amount of googling helped me here:
1. The phone turns on the screen when I pick it up. But there are often mistakes, and the screen just turns on by itself when I'm walking with it in my hand, or in my pocket. It has happened already a few times, after having for phone for 48 hours, that I have dismissed some notifications because of this. Can I stop this function all together?
2. I can also press the screen once and the screen will turn on. This is also a problem when the phone is in my pocket. On my Razer I had to double tap and it still turned on sometimes in my pocket. I ran the Razer phone with Nova Launcher, maybe I have to change to this launcher from the Nothing one to get this double tap feature?
3. I can turn off the screen by double tapping on the home screen. That is a feature I always use and appreciate. I never put the phone screen down so the lights on the backside won't get used. I always double tap to turn on the screen, check for notifications, and double tap to turn the screen off should there be no notifications. Nothing phone won't turn off the screen with a double tap unless I actually unlock it, so I can't do a quick check for notifications by double tapping and double tapping again. It won't matter if the phone is on a table, but I frequently check notifications and put the phone back to my pocket, and having to go for the screen button is not exactly for me. Do I need Nova Launcher here?
4. I NEVER use sounds on my phone, except for the alarms. When someone calls me while the screen is turned off, the screen turns off and I get vibration. If the screen is on I won't get any vibration from it, only a visual notification which is easy to overlook if I let it sit with the screen on but locked if I just checked notifications. Also I like the feedback in my hands in case I am doing something on the phone. I already missed some calls because of this. Can it be changed?
5. Is it possible to manipulate the glyph on the backside? I found a "secret" setting which makes them light up to the music playing, but that became pretty annoying just after 5 seconds. Are there some basic things you can do with the light? Like making a custom event and then specify how the light should react? Could be something simple like when a call is active the lights come on very dim? Maybe a 3rd party app someone did?
6. The Razer Phone 2 (and 1) has HUGE speakers in the top and bottom, so I have been living with pretty big bezels. The Nothing has the same size but the phone is almost 100% screen. If I need to go to the bottom and press a back button or something, I cannot reach anymore like on the Razer. Is there a way to add some virtual bezels on Android?
7. I really hate this "notch" or "camera bump". It is a bit of the same as number 6, but can I remove it completely, so the top of the screen where the camera is won't be used at all? The whole line, effectively adding more bezel here too.
I am probably picky, but I have used my phone in a specific way for my whole life, and I am not really good with changes. Also I think a phone should adapt to my needs, and I shouldn't adapt to it.
Thanks for reading and hopefully helping
Click to expand...
Click to collapse
1. There is an option to turn this feature off under Display->Lock Screen called Lift to show lock screen.
2. Don't know, but you should try using the Nova Launcher.
3. Don't know, but you should try using the Nova Launcher.
4. Very niche use case, you can try to search some root methods.
5. There is root app which can control the light you can try that.
6. and 7. There should be some root apps or magisk modules which allows to do that.
To 2: (I dont know if this works on NothingOS since im on Paranoid Android. But both are very near to stock, maybe it works for you or for others.) I disabled that tap to activate setting and am using fingerprint while screen is off. This can also act as a quick look for notifications, for that i tap where the fingerprint reader is really short so it fails to unlock. This way only the always on display shows up for 3-4 seconds.
Nova wont change anything lockscreen related.
To 5: If you have root, time and like playing around with commands and apps, you can try tasker. Since im on Paranoid Android and the glyphs arent really implemented yet, i made a task that fits my needs perfect.
To your other problems: i think too, the phone should adapt to the user. So i suggest you to wait, i guess there will come roms that are way more customizable.
And maybe a pixel would fit your needings better than this phone because there is a big custom rom scene around.