Hi, I have a T-Mobile polish S5 and I want to change my csc (tpl) in italian (itv)...
The Note 3 procedure (flash the firmware, wipe the device then insert SIM and it changes to my region) works? If not, are there new (and if possible easier) ways without rooting device?
Thanks
tcpma said:
Hi, I have a T-Mobile polish S5 and I want to change my csc (tpl) in italian (itv)...
The Note 3 procedure (flash the firmware, wipe the device then insert SIM and it changes to my region) works? If not, are there new (and if possible easier) ways without rooting device?
Thanks
Click to expand...
Click to collapse
Flash the Italian ITV rom with Odin 3.09, do a data factory reset, setup the phone and then go to recovery and reboot. Sometimes after that you have to reflash the Italian rom again with Odin to make the CSC file stick. Thats how i flashed the DBT rom on my Dutch T-Mobile rom and my device is now recognised as a DBT device by Kies.
gee2012 said:
Flash the Italian ITV rom with Odin 3.09, do a data factory reset, setup the phone and then go to recovery and reboot. Sometimes after that you have to reflash the Italian rom again with Odin to make the CSC file stick. Thats how i flashed the DBT rom on my Dutch T-Mobile rom and my device is now recognised as a DBT device by Kies.
Click to expand...
Click to collapse
Ok.. so, after the first reboot, I will test csc with *#1234# code.. if not changed, I have to flash ITV rom again
And, after csc change, I won't able to update through OTA bu only via Odin.. right?
What about Knox counter?
tcpma said:
Ok.. so, after the first reboot, I will test csc with *#1234# code.. if not changed, I have to flash ITV rom again
And, after csc change, I won't able to update through OTA bu only via Odin.. right?
What about Knox counter?
Click to expand...
Click to collapse
You should be getting the ITV OTA`s or from Kies if the device is recognised as a ITV device by Kies. If not reboot into recovery and wipe the cache and reboot or reflash the ITV rom with Odin without a wipe.
gee2012 said:
You should be getting the ITV OTA`s or from Kies if the device is recognised as a ITV device by Kies. If not reboot into recovery and wipe the cache and reboot or reflash the ITV rom with Odin without a wipe.
Click to expand...
Click to collapse
ok!
I have bought unlocked Galaxy Note 4 from 3 UK. It has own stock firmware with terrible 3 start screen. I have found your threat and then followed the instructions here to reflash stock BTU rom. And now my new Galaxy Note 4 is stock BTU with nice Samsung boot animations. And Samsung Kies recognise it as well.Thanks for info and instructions.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
And Knox is not trigged of course. Cool!
Has anyone tried doing a repair from Kies using a VPN connection with a VPN server in the desired CSC country?
Would that automatically change the CSC? This sounds reasonable because when repairing a bricked phone, the CSC info on the file-system should normally not be trusted (it might not even be there), so how else would Kies know which CSC to use if not from the user's IP address?
I've been able to change the firmware location customization on my Sony Ericsson Arc S and the Sony PC Companion software using the above method, so I was wondering whether the same would be true with Samsung Kies.
this also work's
http://forum.xda-developers.com/galaxy-s5/help/csc-issues-t3001894
regard's joe
gee2012 said:
Flash the Italian ITV rom with Odin 3.09, do a data factory reset, setup the phone and then go to recovery and reboot. Sometimes after that you have to reflash the Italian rom again with Odin to make the CSC file stick. Thats how i flashed the DBT rom on my Dutch T-Mobile rom and my device is now recognised as a DBT device by Kies.
Click to expand...
Click to collapse
Hello. Thanks for your kind help. I have a question about flashing part of your procedure through odin .
Which options should I tick in order to be change the csc?
Do in need to use PIT file and repartition?
Or is it necessary to update the bootloader?
By the way my phone is SM-N910C and i am planning to flash 5.0.1 boc3 rom of poland. And i want to change my CSC meanwhile.
---------- Post added at 10:08 AM ---------- Previous post was at 09:45 AM ----------
jurislasenbergs said:
I have bought unlocked Galaxy Note 4 from 3 UK. It has own stock firmware with terrible 3 start screen. I have found your threat and then followed the instructions here to reflash stock BTU rom. And now my new Galaxy Note 4 is stock BTU with nice Samsung boot animations. And Samsung Kies recognise it as well.Thanks for info and instructions.
---------- Post added at 03:54 PM ---------- Previous post was at 03:49 PM ----------
And Knox is not trigged of course. Cool!
Click to expand...
Click to collapse
I have a question about flashing part of your procedure through odin .
Which options should I tick in order to be change the csc?
By the way my phone is SM-N910C and i am planning to flash 5.0.1 boc3 rom of poland. And i want to change my CSC meanwhile.
Related
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
jeezy85 said:
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
Click to expand...
Click to collapse
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
weasley said:
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
Click to expand...
Click to collapse
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
toker_X1 said:
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
Click to expand...
Click to collapse
BUMP
any luck anyone? still getin ext4 error
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Click to expand...
Click to collapse
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
perosredo said:
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
Click to expand...
Click to collapse
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
ultramag69 said:
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
Click to expand...
Click to collapse
How did you flash it to void warranty?
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
Stay away from Kingo/vroot, xda has removed all links and closed the thread. It's full of malware / spyware and will send all personal details to a Chinese Web server.
Sent from my SM-N9005 using Tapatalk
ultramag69 said:
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
this was my original PTN Firmware
ap= n9005xxubmj3
cp=n9005xxubmj2
csc=n9005phnbmj3
if just flashed it, with odin to the udmj7 firmware
ap= n9005xxudmj7
cp=n9005xxubmj2
csc=n9005oxadmj4
so far so good !! , still no random reboots ( i had before with the ubmj3 firmware )
Click to expand...
Click to collapse
just changed my firmware from xme to btu
just follow these from the s4 forum by kaushalls but use odin 3.04 and be patient it may fail for two time but will eventually will do it and run odin in normal mode not administrator mode
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via back up and reset option
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
and restart (go into recovery and see the csc btu being applied if yes then stop here,do factory reset and restart)
after this the next steps are optional
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
check csc by going to stock recoverry it will show manual mode at the bottom and then show btu csc applied
i am now on xxumdj6
Hi i have downgraded my note 4 N910C from 5.0.1 to 4.4.4 sucessfully but my original CSC is XME malaysia i flashed the official kitkat malaysia ROM but it shows THL thailand version installed help me!!!!kies shows XME but in phone info app shows THL...help
Your rom has multiple csc. you have to root and change your csc to XME
---------- Post added at 01:59 PM ---------- Previous post was at 01:57 PM ----------
Did you do full factory reset from recovery before and after installing new rom
1980aksoy said:
Your rom has multiple csc. you have to root and change your csc to XME
---------- Post added at 01:59 PM ---------- Previous post was at 01:57 PM ----------
Did you do full factory reset from recovery before and after installing new rom
Click to expand...
Click to collapse
yes i did factory reset bt still d same....i don't want to root it will trip the knox..any other method to change csc????
Let me check
Did you try this
1980aksoy said:
Did you try this
Click to expand...
Click to collapse
I downloaded new version and flashed N910CXXU1ANK5....
Try oldest one but be sure wipe from recovery before instal
1980aksoy said:
Try oldest one but be sure wipe from recovery before instal
Click to expand...
Click to collapse
again remains the same bro....wat to do???
Only option left and that is rooooot
1980aksoy said:
Only option left and that is rooooot
Click to expand...
Click to collapse
i think i have to wait until malaysia lollipop 5.0.1 firmware comes before thailand...it should not be multiple csc firmware....like s5 malaysian firmware has comes out first...
to change CSC:
1. using keystring method such like *#272#XXXXXX
2. Using UART- to USB converter to send signal into the phone. (AT+PRODCODE)
exprxp said:
to change CSC:
1. using keystring method such like *#272#XXXXXX
2. Using UART- to USB converter to send signal into the phone. (AT+PRODCODE)
Click to expand...
Click to collapse
keystring method can't use in note 4....dat s old method....any other possibilities s der???
Did u try keystring with DEBUG mode on? (UART-USB must be connected)
exprxp said:
Did u try keystring with DEBUG mode on? (UART-USB must be connected)
Click to expand...
Click to collapse
no i don't have UART-USB cable...wat to do???
I have same problem ? my original csc is CAU ( caucasian) after flash original CAU firmware, it's shows that my csc is SER (russia), I know that with root I can change but I don't want to loose warranty, so no way to back my original csc?
I Made a Backup of my Android 4.4.4 KK before updating to lillipop with CWM Backup function.
I had to flash BOB4 Modem and Bootloader for Lollipop....
Now i want to return to Kitkat 4.4.4. and im asking if i need to manually Flash back OA2 Modem and Bootloader or is the OA2 Modem & BL already included in the System Backup made with CWM?
I am on N910C
levanoza said:
I have same problem my original csc is CAU ( caucasian) after flash original CAU firmware, it's shows that my csc is SER (russia), I know that with root I can change but I don't want to loose warranty, so no way to back my original csc?
Click to expand...
Click to collapse
kies shows XME original csc but in phoneinfo app THL Thailand csc....d same condition for u also???
So please buy one for 5 pounds on ebay
mugilan243 said:
Hi i have downgraded my note 4 N910C from 5.0.1 to 4.4.4 sucessfully but my original CSC is XME malaysia i flashed the official kitkat malaysia ROM but it shows THL thailand version installed help me!!!!kies shows XME but in phone info app shows THL...help
Click to expand...
Click to collapse
did you do with kies 3 ? firmware upgrade and initialization?
i did with kies 3 but same problem! from xme to thl..
hi it's easy just only install 4.4..2 make a hard reset fram stock recovery (wipe date and cahe) then make a factory hard reset from operating ystem settings/backup and reset.... you now when finished go again to recovery stock show updating system and show the csc of 4.4.2 sorry for my english
I have a S7 Edge from UAE that I have flashed with UK Vodafone firmware. Now since all Vodafone firmware is MultiCSC this has set the CSC as VD2 (Which is German Vodafone) when I want VOD (UK Vodafone). I have searched all over the internet for info into how to set a specifc CSC in MultiCSC firmware but cannot seem to find the answer. I have already tried the following suggestions:
1) Go to recovery immediately after flashing from ODIN
2) Use recovery to clear cache
3) Hard Reset in Recovery
4) Hard Reset from Settings menu
5) the *#272*IMEI# trick (this does not work on the S7)
Any help would be greatly appreciated as I want to have the correct CSC to use Wifi Calling and VoLTE. Thanks.
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
dragon_soft said:
I have a S7 Edge from UAE that I have flashed with UK Vodafone firmware. Now since all Vodafone firmware is MultiCSC this has set the CSC as VD2 (Which is German Vodafone) when I want VOD (UK Vodafone). I have searched all over the internet for info into how to set a specifc CSC in MultiCSC firmware but cannot seem to find the answer. I have already tried the following suggestions:
1) Go to recovery immediately after flashing from ODIN
2) Use recovery to clear cache
3) Hard Reset in Recovery
4) Hard Reset from Settings menu
5) the *#272*IMEI# trick (this does not work on the S7)
Any help would be greatly appreciated as I want to have the correct CSC to use Wifi Calling and VoLTE. Thanks.
Click to expand...
Click to collapse
aleks07 said:
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
Click to expand...
Click to collapse
The thing is that flashing the firmware using ODIN shouldn't and hasn't tripped KNOX its still 0x0
There must be some way of setting the CSC from a multiCSC firmware, how else do the operators set theirs.
Does the dual sim feature still work now that you've flashed a non dual sim firmware
aleks07 said:
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
Click to expand...
Click to collapse
There are two versions of S7 edge: Snapdragon powered and Exynos powered. On Exynos powered S7 edge, the code is not working.
---------- Post added at 01:58 PM ---------- Previous post was at 01:57 PM ----------
nkarim said:
Does the dual sim feature still work now that you've flashed a non dual sim firmware
Click to expand...
Click to collapse
Multicsc does not mean dual sim
someone post this instruction from the csc changer utility thread, I followed it and manage to change THL(Thailand multi csc fw) to XCT (unbranded Philippines fw) but I think it's just feels "artificial" to me even though I've got my country specific changes and when using Phone Info app it says XCT but when I try to use Smart Switch on PC it says my CSC is still PHN which I downloaded from the official firmware thread. :/
here's the link:
http://forum.xda-developers.com/note-4/help/guide-to-change-csc-root-rom-multi-csc-t3017207
Thanks, but I don't want to root my phone.
As you know, Oreo is out in U.K.
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/BTU/download/G935FXXU2ERD5/217550/
I have G-935F and it is from Vietnam. Is it possible to flash the official U.K. release and use it without any problems?
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Havik1453 said:
Thank you for the info! Sadly I am downloading the firmware from the sammobile.com 'slug' slow too.
Click to expand...
Click to collapse
Great . Can you upload it to google drive after downloading.
kwaasung said:
Great . Can you upload it to google drive after downloading.
Click to expand...
Click to collapse
Since it is from Sammobile.com, I don't think it is right to upload it to other site because it's their files. You can get Premium Service for faster downlad tho.
kwaasung said:
yes you can , i have been flashing firmware of different country to my s7 edge duos .
you just need to be sure chipset and model number are same.
Between you can flash s7 edge single sim firmware to dual sim.
P.S. can you upload the btu oreo firmware to google drive and share. Sammobile server is slow here.
Thanks
Click to expand...
Click to collapse
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
komok said:
How about Galaxy S7 edge SM-G935FD?
can as well? TQ..
Click to expand...
Click to collapse
yes you can , i have been flashing single sim firmware to dual sim s7 edge.
both sim works .
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Tommolo said:
I can't align the BTU CSC once I installed the firmware for future OTA updates. I did everything I used to do but I keep having the ITV CSC.
I tried installing the firmware with Odin 3 times...
Click to expand...
Click to collapse
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
meawww said:
Dial *#1234# if your csc is "OXA" you are fine its multi csc from different countries. I have ITV csc too by the way.
Click to expand...
Click to collapse
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Maybe it will get ota from multi csc too as OXA or maybe it will fixed ota from current ITV. We will find out if theres an ota update to any of those country listed in OXA csc which are france uk germany italy poland
I got same problem with You guys but i found solution, i downloaded firmware TCL portugal install via odin boot up to first settings turn off my phone and go to recovery mode again wipe cache and data, go to download mode and install BTU. If You wanna faster download via samobile use tool samfirm and it will be faster
https://forum.xda-developers.com/showpost.php?p=76398677&postcount=4037
use this link folks and download official oreo firmware BTU and install it through ODIN.
Thats it
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
raider2k9 said:
it´s because of Mulit-CSC.. when you don´t wipe and factory reset, you stay on your CSC.. so ITV.. when you want BTU ota´s, you need to wipe your S7 complete including factory reset
Click to expand...
Click to collapse
That's what I did. Three times. With Odin and from the stock recovery too.
Tommolo said:
It says OXA but if I open the Phone Info App it says that the active CSC is the ITV one. And I won't receive future ota updates if it doesn't apply the BTU/OXA one.
Click to expand...
Click to collapse
Since BTU and ITV are in same OXA CSC file you must first flash a non OXA firmware like NEE , EUR, DBT and then reflash the BTU firmware.
OXA is multi csc file. ALL in same group wont change from ITV.
Tommolo said:
That's what I did. Three times. With Odin and from the stock recovery too.
Click to expand...
Click to collapse
I forgot the important Point so far.. you Need to boot first time with simcard for BTU region to set CSC to BTU.. because multi-CSC changes CSC after wipe and only when simcard from the other Country is inserted
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
DBT is a OXA Firmware so far.. on my S8 it was the Point.. S7 DBT isn´t OXA?
how to root official oreo rom my samsung helath not work , i need one way to root official oreo uk , please help me
I can't flash with odin
Good afternoon, someone can help me, try to flash the rom btu and the odin tells me pass but when restarting there is no change of android. Now I have android 7 region DBT and probe flashing with home_csc and csc and with the same thing happens, no change. Greetings and thanks
Use Odin 3.13 and uncheck F. Reset Time.
I had XEO csc. I've used HOME_CSC_OXA.
Installation was a success. It didn't erase my data. 0x0
Will see how it goes