Related
So I have my nexus 10 rooted, with no custom ROM on it. I got the prompt that there was a system update, clicked it and it reboots into recovery like it's going to install it, and says verification failed.
I've tried manually downloading it and flashing it through recovery like it was a custom ROM and still get the same error.
How can I update my tablet with 4.3 and stay completely stock? Is there a ROM to flash or something? Thanks!
I am having the same issue and would love a solution.
I have TWRP as recovery, and the update attempted is JWR66Y from JWR66V
Infoport said:
I am having the same issue and would love a solution.
I have TWRP as recovery, and the update attempted is JWR66Y from JWR66V
Click to expand...
Click to collapse
Same here. I even tried unrooting to apply the update and then root again after. Couldn't get the thing to unroot!
Had the same problem. The update will fail if you've installed a custom recovery. Re-flash the stock recovery and the update should work.
dberthia said:
Had the same problem. The update will fail if you've installed a custom recovery. Re-flash the stock recovery and the update should work.
Click to expand...
Click to collapse
Can you please tell me how I would go about doing that?
rick311 said:
Can you please tell me how I would go about doing that?
Click to expand...
Click to collapse
I used the Nexus 10 Toolkit. After it's installed, run and select the option to flash the stock recovery. You can also use it to root again after the update.
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
gbarayah said:
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
Click to expand...
Click to collapse
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
gosku26 said:
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
Click to expand...
Click to collapse
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
I would like to keep my settings if it's possible.
gbarayah said:
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
Click to expand...
Click to collapse
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
gosku26 said:
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
Click to expand...
Click to collapse
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
gbarayah said:
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
Click to expand...
Click to collapse
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
gosku26 said:
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
Click to expand...
Click to collapse
Glad I could help. In the future, as long as you don't modify the system by flashing any modifications, you should be able to get the OTA update to install. Root doesn't affect this, and if you're worried about it, you can always uninstall it.
I opted to update using the stock zip files that were posted above and it worked just fine for me.
Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Install Stock recovery and then try again
Aamirx12 said:
Install Stock recovery and then try again
Click to expand...
Click to collapse
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
1337squirrel said:
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
Click to expand...
Click to collapse
Flash it via Odin or simply restore recovery from Nandroid backup..
http://forum.xda-developers.com/showthread.php?t=2265477
this may help you..
1337squirrel said:
Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Click to expand...
Click to collapse
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Joku1981 said:
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Click to expand...
Click to collapse
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
1337squirrel said:
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
Click to expand...
Click to collapse
It's the problem of no read for be vague. It worked perfectly on the GPE of my sister. The update that appears in the website is ready for install it through custom recovery. Read all the guide:
I am still on the stock ROM with the exception of it being rooted and TWRP installed. Got the notification on my phone that 6.0.1 is available. But since I have a diff recovery, I doubt it will install.
Question is, is someone going to make an update flashable via TWRP for 6.0.1? There have been stock ROMs for the Nexus 7 2013 that were this way and all I had to do was dirty flash and kept all my data and kept my root.
Thanks
techbeck said:
I am still on the stock ROM with the exception of it being rooted and TWRP installed. Got the notification on my phone that 6.0.1 is available. But since I have a diff recovery, I doubt it will install.
Question is, is someone going to make an update flashable via TWRP for 6.0.1? There have been stock ROMs for the Nexus 7 2013 that were this way and all I had to do was dirty flash and kept all my data and kept my root.
Thanks
Click to expand...
Click to collapse
I doubt it, since flashing updates with fastboot is so easy. There are instructions in my guide:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Heisenberg said:
I doubt it, since flashing updates with fastboot is so easy. There are instructions in my guide:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Click to expand...
Click to collapse
Bummer. Thanks for the reply. Saw a link for a flashable OTA via TWRP...but damn thing didnt work and my backup wouldnt restore. Luckily your instructions on reverting back to stock does not wipe the user data (unless you tell it to) and I had a backup of my data anyway. So I just went back to 6.0 stock for now since I had all those files DLed. Will try your OTA instructions when I have some more time.
Thanks again,
techbeck said:
Bummer. Thanks for the reply. Saw a link for a flashable OTA via TWRP...but damn thing didnt work and my backup wouldnt restore. Luckily your instructions on reverting back to stock does not wipe the user data (unless you tell it to) and I had a backup of my data anyway. So I just went back to 6.0 stock for now since I had all those files DLed. Will try your OTA instructions when I have some more time.
Thanks again,
Click to expand...
Click to collapse
OTA's aren't able to be flashed by TWRP so that'd by why that didn't work. The easiest way is just to flash the new build with fastboot, minus userdata.
Heisenberg said:
OTA's aren't able to be flashed by TWRP so that'd by why that didn't work. The easiest way is just to flash the new build with fastboot, minus userdata.
Click to expand...
Click to collapse
What I am going to do for the OTA now. Just saw thought I would give that a try and had a little time to kill. Live and learn.
I take no credit for any of this. Monkey saw, monkey did. MAKE SURE YOU FULLY READ THE ORIGINAL POSTS AS THE MONKEY MAY HAVE OMITTED SOMETHING. If you are clueless, not good at following instructions, or apprehensive you might want to pass. If you managed to already get unlocked and TWRPed, I imagine you are good to go. Still, if you break your phone, it's on you.
1. Do a TWRP backup.
2. Flash one of the choices here (READ THE ENTIRE THREAD) :
https://forum.xda-developers.com/moto-x-style/development/rom-marshmallow-6-0-september-2016-t3536120
REBOOT.
I went with the Deodexed one. Check out the Mods too. I added Viper.
3. Get Systemless Root back using using the flash-able Script in Post #8 here (READ ALL 1st):
https://forum.xda-developers.com/moto-x-style/general/systemless-root-info-t3373864
3a. Direct Link here:
https://forum.xda-developers.com/attachment.php?attachmentid=3809946&d=1468261256
REBOOT
I was still stock but Rooted with Xposed and I successfully Dirty Flashed. OP still recommends a CLEAN Install. After running the script, the phone came back looking the same. I did lose my custom Boot Animation and Viper so I re-flashed them. I also flashed the latest SU just to be sure i had the latest. Probably makes no difference.
Build now says MPHS24.49-18-8 and security Patch 09/01/2016.
Be sure and thank the OP's for the flash-able Update and the Systemless script.
THANK YOU OP'S,
Monkey
Except people have to understand... this puts you in a potentially precarious position. Your bootloader, radios, and partition table are all from a previous ROM version, but your system and boot/kernel are from the current release. Meaning your stuck on this or other custom ROMs and cannot go back to "pure" stock, at least until there is official full factory firmware release for the September update.
Not saying this isn't a valid way to do it, but it isn't truly getting the update... not completely, so my advice to others is proceed with caution and know the possible consequences, they may or not matter to you.
acejavelin said:
...Meaning your stuck on this or other custom ROMs and cannot go back to "pure" stock, at least until there is official full factory firmware release for the September update.
Not saying this isn't a valid way to do it, but it isn't truly getting the update... not completely, so my advice to others is proceed with caution and know the possible consequences, they may or not matter to you.
Click to expand...
Click to collapse
When you say "cannot go back" does something get flagged where a TWRP system wipe and restore of a backup would not work?
G_Man18 said:
When you say "cannot go back" does something get flagged where a TWRP system wipe and restore of a backup would not work?
Click to expand...
Click to collapse
No... That's fine. I mean you can't flash the full system image via fastboot.
acejavelin said:
No... That's fine. I mean you can't flash the full system image via fastboot.
Click to expand...
Click to collapse
Thanks for the quick response. I am surprised how many people get in trouble when TWRP backups are easy to do and can get you going when you screw up--which does happen to all of us. I post little but do read quite a bit in these forums; most of my questions have already been answered. You say you will nudge people in the right direction, but from what I have seen, no one on here answers as many questions so meticulously as you. Thanks!
acejavelin said:
Except people have to understand... this puts you in a potentially precarious position. Your bootloader, radios, and partition table are all from a previous ROM version, but your system and boot/kernel are from the current release. Meaning your stuck on this or other custom ROMs and cannot go back to "pure" stock, at least until there is official full factory firmware release for the September update.
Not saying this isn't a valid way to do it, but it isn't truly getting the update... not completely, so my advice to others is proceed with caution and know the possible consequences, they may or not matter to you.
Click to expand...
Click to collapse
I just received the notification for this update, is it okay to take it, or is it going to cause issues. I am unlocked and rooted currently running MPHS24.49-18-4. I would restore back to a non-rooted TWRP backup of the same build, then flash back the original recovery image, clear cache and dalvik, and finally flash the update.
Will this work and is It okay to update to this build? Thanks.
robn30 said:
I just received the notification for this update, is it okay to take it, or is it going to cause issues. I am unlocked and rooted currently running MPHS24.49-18-4. I would restore back to a non-rooted TWRP backup of the same build, then flash back the original recovery image, clear cache and dalvik, and finally flash the update.
Will this work and is It okay to update to this build? Thanks.
Click to expand...
Click to collapse
If you return to stock, meaning the /system and /boot partitions and recovery is stock, it should work... how you get there isn't as important. But you can't just "flash" the OTA zip file, not directly... and I am not positive if the stock recovery supports sideloading official ZIPs or not, but you should be able to accept it and let it apply itself. The lock or unlock state of the bootloader isn't relevant.
So most likely it would work fine... but backup first, just in case something goes wrong.
acejavelin said:
If you return to stock, meaning the /system and /boot partitions and recovery is stock, it should work... how you get there isn't as important. But you can't just "flash" the OTA zip file, not directly... and I am not positive if the stock recovery supports sideloading official ZIPs or not, but you should be able to accept it and let it apply itself. The lock or unlock state of the bootloader isn't relevant.
So most likely it would work fine... but backup first, just in case something goes wrong.
Click to expand...
Click to collapse
Backup is running right now, so that will be good to go. With systemless root can I perform a full unroot using SuperSU or is it better to restore the unrooted TWRP backup? Thanks.
robn30 said:
Backup is running right now, so that will be good to go. With systemless root can I perform a full unroot using SuperSU or is it better to restore the unrooted TWRP backup? Thanks.
Click to expand...
Click to collapse
If you are rooted, it means you did something with root, right? So unless you are going to undo everything root and then unroot, better to restore the pre-root backup
acejavelin said:
If you are rooted, it means you did something with root, right? So unless you are going to undo everything root and then unroot, better to restore the pre-root backup
Click to expand...
Click to collapse
Very good, thanks for the advice. Good thing I made an unrooted backup when I updated to the May Security update. I knew that would come in handy eventually.
robn30 said:
Very good, thanks for the advice. Good thing I made an unrooted backup when I updated to the May Security update. I knew that would come in handy eventually.
Click to expand...
Click to collapse
Update went perfectly smooth by restoring back to an unrooted 24.221.4 TWRP backup, then flashing stock recovery, and finally taking the update to 24.221.8. I did perform a wipe off cache and dalvik at least twice during the process.
Sent from my XT1575 using Tapatalk
robn30 said:
Update went perfectly smooth by restoring back to an unrooted 24.221.4 TWRP backup, then flashing stock recovery, and finally taking the update to 24.221.8. I did perform a wipe off cache and dalvik at least twice during the process.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Just to be sure. I ran TWRP from Fastboot in ADB as soon as Unlocked and turned the phone on. So you have confirmed I can then flash Stock recovery and take the "full" Update. Mind providing the link to Stock recovery?
Thanks.
schneid said:
Just to be sure. I ran TWRP from Fastboot in ADB as soon as Unlocked and turned the phone on. So you have confirmed I can then flash Stock recovery and take the "full" Update. Mind providing the link to Stock recovery?
Thanks.
Click to expand...
Click to collapse
Pretty sure there is a post in here somewhere that has a link to the 24.221.4 recovery, but I just used the one in this full firmware download. Just extracted the recovery.img file only and flash it using fastboot. Here is the link.
https://forum.xda-developers.com/showpost.php?p=69103575&postcount=243