Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Install Stock recovery and then try again
Aamirx12 said:
Install Stock recovery and then try again
Click to expand...
Click to collapse
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
1337squirrel said:
Is there a thread on how to do that? I seem to remember when I installed this recovery tool to root the phone, it wiped everything. Is it going to do that again? Because I don't want to have to keep wiping my phone every time a new Android update comes out just to be rooted.
Click to expand...
Click to collapse
Flash it via Odin or simply restore recovery from Nandroid backup..
http://forum.xda-developers.com/showthread.php?t=2265477
this may help you..
1337squirrel said:
Hi folks! I have a Galaxy S4 GPE, rooted and unlocked, but stock otherwise. When I try to run the OTA update for 4.4.3, the phone reboots into TeamWin recovery and appears to start installing. The install errors out though. Can I not install the OTA update because I'm rooted? If so, would reverting the rooting allow me to install? Thanks in advance for any help you can provide!
Click to expand...
Click to collapse
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Joku1981 said:
Follow this GUIDE (Method 1: Update Via Custom Recovery).
Click to expand...
Click to collapse
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
1337squirrel said:
I went through that method, and it's essentially the same thing, except that I'm downloading the actual update file myself and not letting Android handle it. Needless to say it didn't work. I also updated my TWRP to 2.7.1.0 and tried; no luck. I also uninstalled SuperSU to see if removing root would help. It didn't.
Click to expand...
Click to collapse
It's the problem of no read for be vague. It worked perfectly on the GPE of my sister. The update that appears in the website is ready for install it through custom recovery. Read all the guide:
Related
I've been looking at the threads but so far I don't believe there's one that tells you what to do if you've actually installed the official OTA update?
I.e. I have an rooted 2.3.4 GT-I9023 with an unlocked bootloader. With no clockwork or anything, as to be honest the last time I used it (on my old HTC DHD) it made my phone unstable (the phone would sometimes boot up of its own accord and stop at the clockwork screen).
Does anyone know how to re-root the NS after it's installed the official OTA update without clockwork?
Thanks
Edit: Downloading the OTA update won't relock the boot-loader will it?
dccxviii said:
I've been looking at the threads but so far I don't believe there's one that tells you what to do if you've actually installed the official OTA update?
I.e. I have an rooted 2.3.4 GT-I9023 with an unlocked bootloader. With no clockwork or anything, as to be honest the last time I used it (on my old HTC DHD) it made my phone unstable (the phone would sometimes boot up of its own accord and stop at the clockwork screen).
Does anyone know how to re-root the NS after it's installed the official OTA update without clockwork?
Thanks
Edit: Downloading the OTA update won't relock the boot-loader will it?
Click to expand...
Click to collapse
You cannot get root back without a custom recovery. OTA will not relock the bootloader, you'll just lose root and custom recovery.
You need to flash custom recovery using fastboot, then flash superuser to get root back. There are plenty of guides in the stickies describing the process.
Ok, so i'm updated to 2.3.6 but of course have lost root (never had CWM to begin with on this phone). Anyone know where I can DL CWM (i'm assuming it needs to be flashed via platform-tools directory in the android sdk per normal) and the latest su file?
EDIT: nvm, I found the latest CWM and successful flashed (my method was correct). However I've not been able to find the latest superuser.zip to flash yet. Also, I don't know why ppl say to use the market as I don't see how that method can work. I've already got superuser installed from before I updated but that doesn't help me get root. Only flashing the zip from recovery (as I understand it) would. Which renders the market useless in this regard.
/confused
The superuser app checks to see if you have the latest superuser binary and will download and instalk it. Or download superuser from within rom manager.
Sent from my Nexus S 4G using xda premium
Ok..the binary update fails (because i don't have root) so it's chicken and egg as far as I can tell.
You where already told. Flash custom recovery via fastboot. Boot into it and flash su.zip Same way it was done prior to update to the ota. Same as it always was and will be.
dccxviii said:
Ok, so i'm updated to 2.3.6 but of course have lost root (never had CWM to begin with on this phone). Anyone know where I can DL CWM (i'm assuming it needs to be flashed via platform-tools directory in the android sdk per normal) and the latest su file?
EDIT: nvm, I found the latest CWM and successful flashed (my method was correct). However I've not been able to find the latest superuser.zip to flash yet. Also, I don't know why ppl say to use the market as I don't see how that method can work. I've already got superuser installed from before I updated but that doesn't help me get root. Only flashing the zip from recovery (as I understand it) would. Which renders the market useless in this regard.
/confused
Click to expand...
Click to collapse
You can find superuser zip here:
http://rootzwiki.com/showthread.php?231-Superuser-2.3.6.3-17-June-2011&
3rd one down, efgh.
Flash in custom recovery.
albundy2010 said:
You where already told. Flash custom recovery via fastboot. Boot into it and flash su.zip Same way it was done prior to update to the ota. Same as it always was and will be.
Click to expand...
Click to collapse
You've misunderstood what i'm after. Thanks for trying to help tho
irishrally said:
You can find superuser zip here:
http://rootzwiki.com/showthread.php?231-Superuser-2.3.6.3-17-June-2011&
3rd one down, efgh.
Flash in custom recovery.
Click to expand...
Click to collapse
Thanks! As far as I can tell you're the first with the link I was after the entire time.
EDIT: Bah, I get a signature verification error when applying the update >.<
dccxviii said:
You've misunderstood what i'm after. Thanks for trying to help tho
Thanks! As far as I can tell you're the first with the link I was after the entire time.
EDIT: Bah, I get a signature verification error when applying the update >.<
Click to expand...
Click to collapse
Turn off signature verification in CWM and try again.
irishrally said:
Turn off signature verification in CWM and try again.
Click to expand...
Click to collapse
Turns out that CWM got overwritten by stock android recovery. Re-flashing CWM and then flashing su did the trick. I'm rooted once more!
Thanks for your help kind sir!
Curious as to how to make CWM stick for next time tho *shrug*
dccxviii said:
Turns out that CWM got overwritten by stock android recovery. Re-flashing CWM and then flashing su did the trick. I'm rooted once more!
Thanks for your help kind sir!
Curious as to how to make CWM stick for next time tho *shrug*
Click to expand...
Click to collapse
You're welcome.
If you stick with a stock ROM then recovery will reflash every time you reboot. To prevent this you can go to system>etc, and change the file install-recovery.init to something else like install-recovery.init.bak.
So I have my nexus 10 rooted, with no custom ROM on it. I got the prompt that there was a system update, clicked it and it reboots into recovery like it's going to install it, and says verification failed.
I've tried manually downloading it and flashing it through recovery like it was a custom ROM and still get the same error.
How can I update my tablet with 4.3 and stay completely stock? Is there a ROM to flash or something? Thanks!
I am having the same issue and would love a solution.
I have TWRP as recovery, and the update attempted is JWR66Y from JWR66V
Infoport said:
I am having the same issue and would love a solution.
I have TWRP as recovery, and the update attempted is JWR66Y from JWR66V
Click to expand...
Click to collapse
Same here. I even tried unrooting to apply the update and then root again after. Couldn't get the thing to unroot!
Had the same problem. The update will fail if you've installed a custom recovery. Re-flash the stock recovery and the update should work.
dberthia said:
Had the same problem. The update will fail if you've installed a custom recovery. Re-flash the stock recovery and the update should work.
Click to expand...
Click to collapse
Can you please tell me how I would go about doing that?
rick311 said:
Can you please tell me how I would go about doing that?
Click to expand...
Click to collapse
I used the Nexus 10 Toolkit. After it's installed, run and select the option to flash the stock recovery. You can also use it to root again after the update.
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
gbarayah said:
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
Click to expand...
Click to collapse
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
gosku26 said:
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
Click to expand...
Click to collapse
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
I would like to keep my settings if it's possible.
gbarayah said:
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
Click to expand...
Click to collapse
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
gosku26 said:
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
Click to expand...
Click to collapse
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
gbarayah said:
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
Click to expand...
Click to collapse
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
gosku26 said:
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
Click to expand...
Click to collapse
Glad I could help. In the future, as long as you don't modify the system by flashing any modifications, you should be able to get the OTA update to install. Root doesn't affect this, and if you're worried about it, you can always uninstall it.
I opted to update using the stock zip files that were posted above and it worked just fine for me.
Anyone figure out how to root the new OTA? It wont allow root with the old flash way since its new OTA
timenewton said:
Anyone figure out how to root the new OTA? It wont allow root with the old flash way since its new OTA
Click to expand...
Click to collapse
Yes use the new IOROOT15 to root the device. But I have been unsuccessful in flashing any roms, however I did get twrp to work with FreeGee app in the android market.
I appreciate your help very much, thank you
jea508 said:
Yes use the new IOROOT15 to root the device. But I have been unsuccessful in flashing any roms, however I did get twrp to work with FreeGee app in the android market.
Click to expand...
Click to collapse
What version of twrp? Sounds like you may need to update.
Sent from my LG-D800
btm fdr said:
What version of twrp? Sounds like you may need to update.
Sent from my LG-D800
Click to expand...
Click to collapse
Im still using the twrp that was flashed with freegee. i'm a newb to all this. Maybe i should flash new version of twrp and try. I was trying to install the mal 4.2.2 rom and just got lg screen, then black.
jea508 said:
Im still using the twrp that was flashed with freegee. i'm a newb to all this. Maybe i should flash new version of twrp and try. I was trying to install the mal 4.2.2 rom and just got lg screen, then black.
Click to expand...
Click to collapse
I've been unsuccessful in getting any roms to work. I tried 4.2.2 rom and got lg screen then black, had to restore nand backup from twrp recovery but it was hellish to get into, had to do the hold vol+pwr precisely, almost gave up. So, reverted to a backup just fine.
Next tried to loki_flash recovery 2.6.3.1 (then was going to do them in order-2.6.3.2>2.6.3.3 [have not tried going directly to 2.6.3.3) and was hit with an unsupported aboot error (device mismatch).
So now i'm going to try and use flash tool to revert back to 11A, root, install twrp (I hope this is possible and I don't brick my phone [i'm new to all of this])
Anyone tell me if this is an acceptable option to proceed? Thank's in advance.
Acceptable. KDZ to 11A.
Just wanted to post I was successful using lg flash tool to revert to 11A, rooted, freegee twrp, flashed 2.6.3.3, flashed OSE ROM. Everything is well ATM!
Sent from my LG-VS980 using Tapatalk
Verizon LG G2
Rooted
Installed TWRP
Without thinking (doink) tried to install the latest OTA.
OTA failed.
Now I cannot reboot into TWRP.
Installed ClockwordMOD and installed its own custom recovery. Still won't boot into any custom recovery.
Phone works fine other than that.
How can I get back into custom reccovery?
Note: When I turn phone off and try to reboot into custom recovery it takes me to the "reset" screen.. and then IT RESETS the phone.
When I try to boot into recovery from Clockwork or TWRP app it gives me the android robot with the open tummy and red triangle.
Danokan said:
Verizon LG G2
Rooted
Installed TWRP
Without thinking (doink) tried to install the latest OTA.
OTA failed.
Now I cannot reboot into TWRP.
Installed ClockwordMOD and installed its own custom recovery. Still won't boot into any custom recovery.
Phone works fine other than that.
How can I get back into custom reccovery?
Note: When I turn phone off and try to reboot into custom recovery it takes me to the "reset" screen.. and then IT RESETS the phone.
When I try to boot into recovery from Clockwork or TWRP app it gives me the android robot with the open tummy and red triangle.
Click to expand...
Click to collapse
The OTA update installed the KitKat bootloader, which hasn't been hacked for custom recovery yet.
Use this to downgrade the only the bootloader and install custom recovery: http://forum.xda-developers.com/showthread.php?t=2715496
You have to root frist. You can use IORoot25 to root the KitKat rom that you have now: http://forum.xda-developers.com/showpost.php?p=48709232
Amro90 said:
The OTA update installed the KitKat bootloader, which hasn't been hacked for custom recovery yet.
Use this to downgrade the only the bootloader and install custom recovery: http://forum.xda-developers.com/showthread.php?t=2715496
You have to root frist. You can use IORoot25 to root the KitKat rom that you have now: http://forum.xda-developers.com/showpost.php?p=48709232
Click to expand...
Click to collapse
Ok.
The KITKAT rom didn't install properly..
Phone says 4.2.2
Super user and apps that need root to work are working properly. Looks like the bootloader is the only thing that got hit.
Danokan said:
Ok.
The KITKAT rom didn't install properly..
Phone says 4.2.2
Super user and apps that need root to work are working properly. Looks like the bootloader is the only thing that got hit.
Click to expand...
Click to collapse
Oh. Not sure if AutoRec works if you are still on 4.2.2. Sorry bout that.
If it doesn't work, you can always just manually flash the complete firmware using this guide: http://forum.xda-developers.com/showthread.php?t=2432476. Surest way to get back from failed flashes. You can flash the full 4.2.2 or 4.4.2 KDZ and then start over again. That method wipes everything though.
Amro90 said:
Oh. Not sure if AutoRec works if you are still on 4.2.2. Sorry bout that.
If it doesn't work, you can always just manually flash the complete firmware using this guide: http://forum.xda-developers.com/showthread.php?t=2432476. Surest way to get back from failed flashes. You can flash the full 4.2.2 or 4.4.2 KDZ and then start over again. That method wipes everything though.
Click to expand...
Click to collapse
YIKES.
Well.. it got the TWRP recovery loaded alright.
But it won't boot into anything else...light is flashing but screen is black.
HELP
I am screwed here.
#1. Tried the "unbrick stock" solution. Can NOT get it to work. I tried it all 3 ways given and it gets to the LG driver start... and then it says I am up to date. I tried to change the country, the language, upgrade recovery, can NOT get it to work.
#2. I can get TWRP to load. But I can't get my computer to recognize my phone so I can move a rom over
#3. I can't get ADB to recognize my phone.
HEEEEEEEEEEEEEEEEEEEEEEELP
Danokan said:
HELP
I am screwed here.
#1. Tried the "unbrick stock" solution. Can NOT get it to work. I tried it all 3 ways given and it gets to the LG driver start... and then it says I am up to date. I tried to change the country, the language, upgrade recovery, can NOT get it to work.
#2. I can get TWRP to load. But I can't get my computer to recognize my phone so I can move a rom over
#3. I can't get ADB to recognize my phone.
HEEEEEEEEEEEEEEEEEEEEEEELP
Click to expand...
Click to collapse
save yourself the hassle flash stock 4.4.2 KK, use IORoot25 to root and then use Autorec to install Custom recovery.
Time needed 1 hour.
Hartendief said:
save yourself the hassle flash stock 4.4.2 KK, use IORoot25 to root and then use Autorec to install Custom recovery.
Time needed 1 hour.
Click to expand...
Click to collapse
How do you propose I flash it?
SOLVED
FIXED
http://forum.xda-developers.com/showthread.php?t=2448960