Related
Full Rom link
http://android.clients.google.com/p...2cf141e6a.signed-soju-ota-102588.f182cf14.zip (89.9 MB)
Link for GRH78C
http://android.clients.google.com/p...9e.signed-soju-GRI40-from-GRH78C.98f3836c.zip
Link for GRH78 only
http://android.clients.google.com/p...2bf.signed-soju-GRI40-from-GRH78.e0b546c4.zip
As posted here by Matrik: http://forum.xda-developers.com/showpost.php?p=11616226&postcount=389
I figured I'd get this unburied for everyone interested (which is likely a lot of folks).
If you're stock and unrooted - download this and place it on the root of the SD card - named update.zip. Boot into recovery. Hold Pwr and then Vol up and then choose to apply update.zip.
just got it on mine too.
does anyone know if this build is still rootable in the same method of 2.3.2? just curious
krohnjw said:
http://android.clients.google.com/p...2bf.signed-soju-GRI40-from-GRH78.e0b546c4.zip
As posted here by Matrik: http://forum.xda-developers.com/showpost.php?p=11616226&postcount=389
I figured I'd get this unburied for everyone interested (which is likely a lot of folks).
Also Mirrored if the download breaks for some reason:
http://hotfile.com/dl/107285073/f39f21c/e0b546c442bf.signed-soju-GRI40-from-GRH78.e0b546c4.zip.html
Click to expand...
Click to collapse
WOW - didn't think I'd see this so soon - thanks for digging it out man.
Guess I'll be the guinea pig
jaker.the.skater said:
just got it on mine too.
does anyone know if this build is still rootable in the same method of 2.3.2? just curious
Click to expand...
Click to collapse
If your bootloader is unlocked then rooting is as easy as flashing CWM and flashing the SU binary.
If the bootloader is locked then the changelog indicates that you will not longer be able to use fastboot boot to load CWM and root that way.
With that said, I applied a lot of updates on my Nexus One without losing root and kept the boot loader locked the whole time. You'll need to pay attention, but you should be able to do the following.
Download the SU binary zip and place that on the SD card.
The OTA will not overwrite CWM until it actually boots. So, after you apply the OTA boot directly into recovery and apply the SU zip. This will give you root. (Just pay attention and hold vol up when it goes to reboot)
When you subsequently load up android CWM will be overwritten. At this point you can use the flash_image binary to manually flash CWM to recovery (or potentially ROM Manager).
ok my bootloader is unlocked. so basically i just do like before where you rename the install recovery.sh file so that cwm sticks? if so then cool beans.
jaker.the.skater said:
ok my bootloader is unlocked. so basically i just do like before where you rename the install recovery.sh file so that cwm sticks? if so then cool beans.
Click to expand...
Click to collapse
Yes sir. 10 chars
very cool.
Can i dowload this on a stock Ns
Sent from my Nexus S using XDA App
doesnt work for me - failed at file_getprop("/system/build.prop"
this update seems to be for build GRH78 - GRI40 ie 2.3.1 to 2.3.3
Im on 2.3.2 .......
any idea's???
moon-unit said:
doesnt work for me - failed at file_getprop("/system/build.prop"
this update seems to be for build GRH78 - GRI40 ie 2.3.1 to 2.3.3
Im on 2.3.2 .......
any idea's???
Click to expand...
Click to collapse
same here..... hmmm
krohnjw said:
If your bootloader is unlocked then rooting is as easy as flashing CWM and flashing the SU binary.
If the bootloader is locked then the changelog indicates that you will not longer be able to use fastboot boot to load CWM and root that way.
With that said, I applied a lot of updates on my Nexus One without losing root and kept the boot loader locked the whole time. You'll need to pay attention, but you should be able to do the following.
Download the SU binary zip and place that on the SD card.
The OTA will not overwrite CWM until it actually boots. So, after you apply the OTA boot directly into recovery and apply the SU zip. This will give you root. (Just pay attention and hold vol up when it goes to reboot)
When you subsequently load up android CWM will be overwritten. At this point you can use the flash_image binary to manually flash CWM to recovery (or potentially ROM Manager).
Click to expand...
Click to collapse
So what your saying is we can ( Possibly ) install 2.3.3 via the link with rooted devices with an unlocked bootloader ( if the 2.3.3 does not lock bootloader / root ) and then just re install superuser e.c.t and were away ?
Same here, update fails. I am on 2.3.2 and Stock non-rooted.
hutzdani said:
So what your saying is we can ( Possibly ) install 2.3.3 via the link with rooted devices with an unlocked bootloader ( if the 2.3.3 does not lock bootloader / root ) and then just re install superuser e.c.t and were away ?
Click to expand...
Click to collapse
Yes - if you're unlocked then you'll only need to remove the isntall-recovery.sh and reflash CWM/su and you're golden.
It's a bit trickier for users who rooted without unlocking the boot loader and do not want to unlock at this point.
Looks like this is for GRH78, NOT GRH78C- we'll have to wait for that package still.
Update is for build number GRH78 only :-(
Wow!
Thx)
SupaDupaFly24 said:
Update is for build number GRH78 only :-(
Click to expand...
Click to collapse
Yeah, that is, only for 2.3.1 until now.
We'll have to wait for the GRH78C (2.3.2) build update.
this really pisses me off. i was on 2.3.2 and i got the ota but when i tried to install it from cwm it didn't work. so then when i saw this one i gave up on the one i had and now its gone. turns out i should've just did a logcat and got the one for 2.3.2.
oh well it'll be up soon
Sweet. I was trying to get to stock ROM and i was on 2.3.1
2.3.3 Flashed just perfectly
I did a nandroid backup to 2.3.1 and then installed the update and it worked fine.
Please, Could you make step by step guide, how to apply update from that link on stock, nonroot device. Thanks.
Sent from my Nexus S using XDA App
Could someone please point me in the direction of where I can get the Evo 4G 4.22 stock recovery image?
Stock recovery is no recovery,what exactly are you looking for?
Sent from my PC36100 using XDA App
I am rooted and have CWM installed. I am looking to put back the stock 4.22 recovery so I may install the the 4.24 OTA update.
I like to keep my Rom stock and prefer to install updates via OTA.
If you take the 4.24 OTA you will no longer be "rooted" Look for one of the rooted ROMs and flash it
Yeah,what he said
Sent from my PC36100 using XDA App
I am using the Unrevoked root method and no update (3.70,4.22) to date has unrooted my phone.
I have simply been restoring the current version of the stock recovery, which I have previously found on the internets, and then running the OTA update as normal. Once done I install CWM and the latest SU updates. Works great.
I would like to perfrom this method once agian to install the 4.24 update and all I need is the 4.22 stock recovery.
If you don't want to be rooted anymore, then just accept the OTA - it'll override your current recovery with the stock recovery, which is actually a lack of recovery.
But as others have said, you won't be able to root again unless you've ran unrevoked or unrevoked forever and remain s-off. In that case, you'll have to flash a recovery and then flash the rooted version. So if you want to stay rooted, you might as well go ahead and do that. You should be able to just wipe cache and dalvik and install, so the end result will be the same but you'll be rooted.
I hope that made sense...
(from... Evo/MIUI/Tapatalk)
kc8emd said:
Could someone please point me in the direction of where I can get the Evo 4G 4.22 stock recovery?
Click to expand...
Click to collapse
You probably want this:
http://forum.xda-developers.com/showthread.php?t=1133379
This is the actual update, but rooted, so you can keep your CWM recovery, get the latest update that was made OTA, but remain rooted. You don't want to just accept the OTA if prompted, your root will go away.
Once you've downloaded it (and the radio update as well), follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=14933526&postcount=31
Thats the problem. I cannot install the OTA 4.24 update with CWM installed, nor can I install the update manually, via renaming and then update method, as it will error out during install.
OTA updates will only install if the proper stock verion of recovery in installed, hence I really need the 4.22 recovery.
Installing OTA updates when using Unrevoked does not change S-OFF, it only overwrites SU which can be easily reinstalled. I know as I rooted my evo way back when it was version 3.26 using unrevoked 3 and have installed every OTA update since using this method and still have S-OFF
Thanks, but I do not need to go that route. My method will update as normal and I wont have to wipe my phone.
dmolavi said:
You probably want this:
http://forum.xda-developers.com/showthread.php?t=1133379
This is the actual update, but rooted, so you can keep your CWM recovery, get the latest update that was made OTA, but remain rooted. You don't want to just accept the OTA if prompted, your root will go away.
Once you've downloaded it (and the radio update as well), follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=14933526&postcount=31
Click to expand...
Click to collapse
kc8emd said:
Thanks, but I do not need to go that route. My method will update as normal and I wont have to wipe my phone.
Click to expand...
Click to collapse
And you won't be rooted anymore. There are only about 3 thousand posts telling people this, and most AFTER they found out the hard way. There are stock Rooted ROMS based on the recovery, as in STOCK! but still rooted, and up to date.
BTW, there are also a lot of posts detailing how the OTA made their phones worse, but if you want to be a hard head, go ahead and bury yourself, but don't come back crying when you figure out.
how come every other incompetent noob can manage to get their phone back to stock and permanently locked/unrooted, yet I cannot manage this feat intentionally?
if I intentionally flash the 4.22 zip from shipped-roms will this eliminate my root and recovery?
well install the 4.22 update from recovery didn't work... it aborted with some error.
ARGHHH!!! SOMEONE HELP ME LOCK MY PHONE PLEASE!!!
I appreciate the heads up, but if done correctly, it does work and has worked great for me the past few OTA updates.
I am aware of all the potential problems and am not the only one successfully installing OTA updates on a rooted evo and staying rooted.
HipKat said:
And you won't be rooted anymore. There are only about 3 thousand posts telling people this, and most AFTER they found out the hard way. There are stock Rooted ROMS based on the recovery, as in STOCK! but still rooted, and up to date.
BTW, there are also a lot of posts detailing how the OTA made their phones worse, but if you want to be a hard head, go ahead and bury yourself, but don't come back crying when you figure out.
Click to expand...
Click to collapse
Bottom line is if you change back to S-ON, and apply the OTA you lose root forever (or until Unrevoked finds a new backdoor). If you leave S-OFF then you can downgrade, and reload a recovery. The stock ROM's you'll find here (ex. Sprint Lover's) are stock, and rooted. They pretty much the same thing you get over the air. Don't be a lid..
I downloaded a from shipped roms the last rom for my evo and downloaded the s-on tool. Ran the tool then connected my phone to the computer and ran the RUU i donloaded. Fully stock unrooted locked phone
I am a noob
First learn the correct terminology for what you are tying to achieve. There is no 4.22 recovery that you can just flash, there is a 4.22 ROM and a 4.22 RUU.
Then check out the WIKI and FAQs these both contain the info you are looking for .
Not trying to be mean. Just do some research before you mess up your phone and come here asking for stuff that doesn't exist.
4.22 ROM = just the ROM
4.22 RUU = .exe that runs on your PC to FLASH your PHONE with new radio, recovery, hboot, rom, etc
exabrial said:
well install the 4.22 update from recovery didn't work... it aborted with some error.
ARGHHH!!! SOMEONE HELP ME LOCK MY PHONE PLEASE!!!
Click to expand...
Click to collapse
http://shipped-roms.com/index.php?category=android&model=Supersonic
http://unrevoked.com/rootwiki/doku.php/public/forever
cddmh said:
I downloaded a from shipped roms the last rom for my evo and downloaded the s-on tool. Ran the tool then connected my phone to the computer and ran the RUU i donloaded. Fully stock unrooted locked phone
I am a noob
Click to expand...
Click to collapse
Well said
This is what you want to do to get to the latest OTA STOCK no root
* if you leave S-Off you can re-root *
[TIPS AND DISCUSS] ICS update DOES NOT *ALWAYS* BREAK ROOT (& other tips and reviews)
This is not intended to be a bug-sharing thread, report them if you wish, but I'm sure there will be entire threads devoted to this, so keep this in mind when posting.
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried. Dlpkgfile available HERE NOW!
luna_c666 said:
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried. Dlpkgfile available HERE NOW!
Click to expand...
Click to collapse
Cheers luna ... just need a WW version
Noob question though ..... I am on a custom ROM. I have CWM recovery.
I thought I couldnt update OTA if my TF was rooted ? or is it that I have the custom recovery that prevents this ?
I can flash back to stock easily - its removing CWM and unrooting that looked to be the more techie issue.
With what you are saying is there an easy way, once I have reverted to stock ROM, to revert to stock recovery without losing root ? Or do i even need to revert to stock ROM ??
Can update if rooted, but need to be on a stock ROM and stock Recovery image in order to successfully install. Download the 8.2.3.5 US recovery file located here :http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/, flash it through CWM and you have now overwritten your CWM and gone back to stock. Ready to update from there. Cheers!
so what is the procedure to update? Rename it, put it in microsd root and reboot into recovery?
another question, i cannot root with nachoroot, so is it possible to root with 1-click root?
asder00 said:
so what is the procedure to update? Rename it, put it in microsd root and reboot into recovery?
Click to expand...
Click to collapse
That might work, I don't know exactly because I got the FOTA pushed to my device and updated through the 'official' update process. I honestly have no idea how the dlpkgfile is even packaged, if it is CWM flashable or requires stock recovery etc., honestly my first time fooling with capturing the OTA files.
Ok I'm trying and I will tell u....
I don't care about root right now...
luna_c666 said:
Can update if rooted, but need to be on a stock ROM and stock Recovery image in order to successfully install. Download the 8.2.3.5 US recovery file located here :http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/, flash it through CWM and you have now overwritten your CWM and gone back to stock. Ready to update from there. Cheers!
Click to expand...
Click to collapse
Do I understand correctly that I only have to do Step 7 of the tutorial? and then install ICS (regular update process)?
I am rooted and I have CWM (no custom ROM)
So first impressions luna? Might as well start a discussion to keep the post on top and visible.
Did you run Spark? If so how does it compare?
Positives negatvies
Yes I do realise that you have had it for like 12 seconds but first impressions are nice.
Sent from my Sparkified TF101
Dreamboxuser said:
So first impressions luna? Might as well start a discussion to keep the post on top and visible.
Did you run Spark? If so how does it compare?
Positives negatvies
Yes I do realise that you have had it for like 12 seconds but first impressions are nice.
Sent from my Sparkified TF101
Click to expand...
Click to collapse
Unfortunately I never did get around to trying the latest Spark, I saw the complaints about touchscreen issues and decided it might be best to wait for Paul to work it out, but Asus finally got the upper hand on him!
Seems a treat, but I expected as you can see I've been running CM9 on my epic for about 3 weeks now. Much snappier, generic comments that have already been posted- but not explored completely yet, too busy helping others get their own ICS since the update came in to be selfish and sign off yet
Steven, I'm not sure which step 7 you are referring to but you will need a stock recovery in order to flash the file. CWM will flash files that have been repacked for CWM usually, and OTA updates install from the cache partition so CWM will not be able to install the OTA. CWM can flash it manually, I THINK (not sure if it needs to be repackaged for that to occur or not), but CWM will not install the OTA through the normal OTA process.
luna_c666 said:
Steven, I'm not sure which step 7 you are referring to but you will need a stock recovery in order to flash the file. CWM will flash files that have been repacked for CWM usually, and OTA updates install from the cache partition so CWM will not be able to install the OTA. CWM can flash it manually, I THINK (not sure if it needs to be repackaged for that to occur or not), but CWM will not install the OTA through the normal OTA process.
Click to expand...
Click to collapse
I was refering to step 7 on the Unlocker page you pointed to:
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
So in short only replace the recovery as explained in pojnt 7 (and 8) of that page and then do a regular system update to ICS.
No need to unroot??
Will this keep my apps and settings? I do have Titanium so I can do a backup and restore that way.
Thanks a lot for helping!!
Steven_nl said:
I was refering to step 7 on the Unlocker page you pointed to:
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
So in short only replace the recovery as explained in pojnt 7 (and 8) of that page and then do a regular system update to ICS.
No need to unroot??
Will this keep my apps and settings? I do have Titanium so I can do a backup and restore that way.
Thanks a lot for helping!!
Click to expand...
Click to collapse
Yes, your apps and data should remain intact, and that is correct, you only need to flash the recovery back to stock if you are already on a stock ROM. As of right now, only US and TW firmware versions are getting the OTA pushed to their device, but if you are not one of these you can manually flash to these stock ROMs via CWM if need be. But yes, if you are stock + root + CWM, you only need to flash over CWM back to stock. Root is fine to keep and all data will be saved (it is an official update, people would be irate if it wiped their data you know!)
Great stuff thanks again. I'n in Europe so I might need to wait for a bit but that is fine.
No problem. Ok guys, I've done a bunch of talking and answered quite a few PMs, and posted all my methods/experience with ICS so far, now, I'm going to go play for a while (it's 7am, and I've not been to bed, and I have to work at 4pm and my son will likely be up in an hour, so no sleep for me today, should have a well-rounded review by the time you see me again)
If you guys want to keep this thread alive, have at it! Turn it into a discussion.. See you guys in a while, can't wait to see what I miss while I'm gone
Well I did the update with root disabled with rootkeeper but now rootkeeper will not restore Root.
I guess I should of read thi before updating
Anyone in the same state?
dmazyn said:
Well I did the update with root disabled with rootkeeper but now rootkeeper will not restore Root.
I guess I should of read thi before updating
Anyone in the same state?
Click to expand...
Click to collapse
If you are SBK1 device you can flash CWM via NVFlash, use CWM to flash SU binary from ChainsDD (located HERE ) and then flash the stock recovery if you so choose to return to stock recovery (in case any patches or incremental updates come out you may need this if you want to stay stock ICS).
ONE MORE THING BEFORE I GO GUYS;
I just noticed that ICS brings a new recovery as well, so the update will overwrite your recovery, I assume it will do this if you figure out how to flash via CWM so be prepared for that. Any devs will want to work on removing the recovery blob from the patch file before releasing as a CWM flashable zip. My 2 cents. See you guys in a few hours/days, depending on how addicted I get to ICS.
Your dlpkgfile didn't work.. i need the WW version
Anyway I've rooted with nachoroot with stock asus recovery, waiting for ics update via FOTA
asder00 said:
Your dlpkgfile didn't work.. i need the WW version
Anyway I've rooted with nachoroot with stock asus recovery, waiting for ics update via FOTA
Click to expand...
Click to collapse
You need to reflash with a US version not WW.
Sent from my Sparkified TF101
Confirmed working! thanks. too bad i have to go straight to work
Dreamboxuser said:
You need to reflash with a US version not WW.
Sent from my Sparkified TF101
Click to expand...
Click to collapse
Ur right but i prefer to wait for ww
luna_c666 said:
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried.
Click to expand...
Click to collapse
After I updated to ICS, OTA Rootkeeper gave me the option to Restore root. Under the status section, Device rooted and Root permission granted were both unchecked until I used the Restore root option.
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
gosku26 said:
I have a rooted (no CWM changed) and unlocked Nexus 4 with JB 4.3.
I did not get the OTA yet and I wondered if it is because the phone is rooted. In addition, I read some problems with people who tried to update to 4.4 with rooted phones and are getting infinite bootloops.
Do I have to unroot my 4.3 for getting the OTA and achieving a successful installation?
Thank you all on advance
Click to expand...
Click to collapse
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
gbarayah said:
I am rooted and received the OTA notification yesterday. You 'SHOULD' be able to install if ALL you did was root. However, if you applied any mods that made changes to the system, the OTA will fail.
This is your best bet if you want to run 4.4. You'll need to install a custom recovery to flash the zip files. All the files and instructions are here:
http://forum.xda-developers.com/showthread.php?t=2527806
Click to expand...
Click to collapse
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
gosku26 said:
Will flashing the stock 4.4 wipe my data, or it is like getting the OTA, that I keep my settings...?
Click to expand...
Click to collapse
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
taodan said:
Why do you need OTA update when you can get the stock ROM in flashable zip file? All features are remain the same for stock ROM. Search and download it in the Development sections.
Click to expand...
Click to collapse
I would like to keep my settings if it's possible.
gbarayah said:
Did you read the linked post?
First step after installing custom recovery is to wipe data/factory reset, so yes, you will lose your settings.
Click to expand...
Click to collapse
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
gosku26 said:
What I would like is to update to kitkat without losing my data.
I have the bootloader unlocked and the phone rooted, but when I go to recovery mode I get "No command" screen (is that normal?).
I was thinking of getting the phone unrooted, then update through the OTA, then root it again, just for making sure I don't break anything, but the "No command" screen does not look very good...
On the other hand, Would I lose my data if I "unroot" the phone?
Click to expand...
Click to collapse
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
gbarayah said:
To unroot, all you need to do is go into SuperSu, disable root, uninstall the app and then reboot the phone.
If all you have done is root the phone, and didn't modify anything else, then the OTA update 'SHOULD' install without a problem.
You can go to Android Police and download the OTA files and flash them via ADB, or you can just wait for the OTA to be pushed to your device.
If you decide to do it the manual way, there is one additional step you must take to ensure to keep your data I believe.
Click to expand...
Click to collapse
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
gosku26 said:
Thank you for your help gbarayah, I really appreciate it.
One last thing: I'm not pretty sure the only thing I modified was the rooting. I did not install any zip to modify my stock version, but there is something weird. I will explain:
At first I had 4.2.2, then I rooted and installed CWM. When 4.3 was released I got the OTA update correctly but I lost the root, so I rooted it again, this time without CWM.
Is the "No command" screen what is supposed to appear when I go to the recovery mode from fastboot menu? Or I would get a default recovery mode program?
If everything is right I will unroot for getting the OTA, but if not, I'm afraid I will have to flash CWM and the stock version, loosing my settings...
EDIT: Ok, I've just realized to get into stock system recovery I have to press VolUp and Power buttons once I'm in the 'No Command' screen, so I'm pretty sure I don't have problems installing the OTA update. Thank You!!!
Click to expand...
Click to collapse
Glad I could help. In the future, as long as you don't modify the system by flashing any modifications, you should be able to get the OTA update to install. Root doesn't affect this, and if you're worried about it, you can always uninstall it.
I opted to update using the stock zip files that were posted above and it worked just fine for me.
http://shield.nvidia.com/tablet-release-notes/2.2/
now to figure out how to get this to update on my rooted LTE Tablet.....
I'm rooted and just got the update. But haven't completed the update yet as I'm too lazy to reroot.
I tried using the nvidia updater, which failed since it rebooted and CWM had no idea what to do. I made a CWM backup so I am going to see how well it flashes in CWM manually.
I managed to find the OTA download location and have superSU at the ready in my downloads folder in case I have to reflash. the OTA saved as:
/data/data/com.nvidia.ota/files/ROM/shield_tablet_software_upgrade_2.2_-_lte__5.0.1.zip
Someone please report the steps on how to do this for Rooted 2.1.
CWM install zip failed. build fingerprint mismatched, its probably CWM. Will try sideloading stock recovery then installing the zip afterward, I think I remember seeing somewhere here that's how people upgraded rooted devices from 2.0 to 2.1
Omg things seem to be more snappy! The dreaded lag may be gone! I'm not rooted so I did the ota install
I'm really interested in your findings, i need to find a tutorial on how to flash back stock recovery then i can do the update and hopefully reroot.
Iorkca said:
I'm really interested in your findings, i need to find a tutorial on how to flash back stock recovery then i can do the update and hopefully reroot.
Click to expand...
Click to collapse
currently working on it right now, need about a few to upload all files and then get everything setup....
From a post on Geforce forum
fjrichman
*
*
*
*
For rooted users you'll want to use theses.
US LTE Full:*http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_na_do-full_ota-29979_512.4856.zip
US Wifi Full:*http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_na_wf-full_ota-29979_512.4856.zip
I successfully updated rooted wifi using link
Awsome sounds good. Quick question to get stock recovery back all id have to do is extract the recovery.img file from the ota 2.1 file i downloaded off nvidia's site and load it like i did the CWM recovery from the root thread right?
Or (if you've got root) wait until the full 2.2 .zip is available, then download it and flash it through your custom recovery, followed by the latest SuperSU. (just like the last Lollipop update).
Interestingly, the OTA update tool has an option for "Check full update" (under the top right menu), but it doesn't seem to return anything...yet...
Sent from my SHIELD Tablet using XDA Free mobile app
Pretty much you are going
Flash Stock recovery by any preferred method
Flash Update
adb Reflash CWM recovery
Thru recovery flash SuperSU
**Profit**
Working on getting all the files in one package as of right now. Damn internet hogs in my house.
Cant we use Flashify to flash stock recovery and then updating the OTA and then reflash our recoverys and supersu.zip?
NaminatoR1254jaime.sier said:
Cant we use Flashify to flash stock recovery and then updating the OTA and then reflash our recoverys and supersu.zip?
Click to expand...
Click to collapse
Yeah, if you have the stock recovery file....
mcord11758 said:
From a post on Geforce forum
fjrichman
*
*
*
*
For rooted users you'll want to use theses.
US LTE Full:*http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_na_do-full_ota-29979_512.4856.zip
US Wifi Full:*http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_na_wf-full_ota-29979_512.4856.zip
I successfully updated rooted wifi using link
Click to expand...
Click to collapse
Did you clean install, or did you dirty flash?
Just curious if this can be applied as an update our not.
Sent from my SHIELD Tablet using XDA Free mobile app
masterchiefb117 said:
Yeah, if you have the stock recovery file....
Click to expand...
Click to collapse
I dont
But Im downloading the 2.1 update stock images. Funny how I deleted the 2 gb zip yesterday and now I need it.
masterchiefb117 said:
Pretty much you are going
Flash Stock recovery by any preferred method
Flash Update
adb Reflash CWM recovery
Thru recovery flash SuperSU
**Profit**
Working on getting all the files in one package as of right now. Damn internet hogs in my house.
Click to expand...
Click to collapse
You won't be able to successfully flash the UPDATE .zip file (~94MB) on a rooted (read: modified) Lollipop version.
Recovery version is irrelevant.
You need the FULL 2.2 rom (already found above , ~731MB), flash it in your current custom recovery and re-root by flashing SuperSU again.
Sent from my SHIELD Tablet using XDA Free mobile app
ok, here's what I dug up. If you are rooted and want it NOW, get to it, otherwise wait for someone to clean up the process:
get the OTA from here: https://forums.geforce.com/default/...hread-released-2-17-15-/post/4464815/#4464815
get your latest SuperSU flashable zip: http://download.chainfire.eu/396/SuperSU/
get your recovery ready for reflashing, the OTA will install the stock recovery again. I went with: http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90
boot into recovery and install zip from sideload. then choose either: adb sideload productionBL-droid-signed-wx_na_do-full_ota-29979_512.4856.zip or adb sideload productionBL-droid-signed-wx_na_wf-full_ota-29979_512.4856.zip
reboot and let the upgrade happen, you've lost root and recovery, but you still are unlocked so you just have to reflash them. get into fastboot with power and volume down, then flash recovery: fastboot flash recovery openrecovery-twrp-2.8.5.0-shieldtablet.img
load up recovery and flash the superSU zip and you're back in business.
ShrekOpher said:
Did you clean install, or did you dirty flash?
Just curious if this can be applied as an update our not.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
Wiped cache and davlik then just in case flashed supersu after rom
An Droid said:
You won't be able to successfully flash the UPDATE .zip file (~94MB) on a rooted (read: modified) Lollipop version.
Recovery version is irrelevant.
You need the FULL 2.2 rom (already found above , ~731MB), flash it in your current custom recovery and re-root by flashing SuperSU again.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
That means a rooted lollipop user with custom recovery, can download the full ota, and dirty flash it, right?