So today I was trying to update my phone to a newer version of 4.4.2 I downloaded N900ZSUDNG1_N900OZSDNG1_BRI also Odin v3.09, Odin detects my phone perfectly but flashing fails every time i tried 4 different USB ports and same thing at the end of flashing it says FAILED but i see no error on the log it goes all the way to where it writes CACHE it seems and then says FAILED any ideas as to what to do to recover my phone would be appreciated.
Hey good morning,
I would suggest you to flash root (knox will be flagged 0x1)
Then flash cwm (or any recovery you like)
Put a nice ROM in your SD card (use another device or a card reader for pc)
Boot into recovery, wipe all data and flash the rom.
(* the steps above WILL void your warranty)
bligui said:
So today I was trying to update my phone to a newer version of 4.4.2 I downloaded N900ZSUDNG1_N900OZSDNG1_BRI also Odin v3.09, Odin detects my phone perfectly but flashing fails every time i tried 4 different USB ports and same thing at the end of flashing it says FAILED but i see no error on the log it goes all the way to where it writes CACHE it seems and then says FAILED any ideas as to what to do to recover my phone would be appreciated.
Click to expand...
Click to collapse
Download again may what u download is corrupted.
bligui said:
So today I was trying to update my phone to a newer version of 4.4.2 I downloaded N900ZSUDNG1_N900OZSDNG1_BRI also Odin v3.09, Odin detects my phone perfectly but flashing fails every time i tried 4 different USB ports and same thing at the end of flashing it says FAILED but i see no error on the log it goes all the way to where it writes CACHE it seems and then says FAILED any ideas as to what to do to recover my phone would be appreciated.
Click to expand...
Click to collapse
Try a different region other than Hong Kong.
Flash again stock with odin and check md5 before
rayman95 said:
Flash again stock with odin and check md5 before
Click to expand...
Click to collapse
Usually Odin checks the MD5 validity of the file before it begins anything. If he just gets stuck on cache, the MD5 check must have passed.
bligui said:
So today I was trying to update my phone to a newer version of 4.4.2 I downloaded N900ZSUDNG1_N900OZSDNG1_BRI also Odin v3.09, Odin detects my phone perfectly but flashing fails every time i tried 4 different USB ports and same thing at the end of flashing it says FAILED but i see no error on the log it goes all the way to where it writes CACHE it seems and then says FAILED any ideas as to what to do to recover my phone would be appreciated.
Click to expand...
Click to collapse
try a different usb cable, or use the original samsung cable that you got from the box...
nicholaschum said:
Try a different region other than Hong Kong.
Click to expand...
Click to collapse
Fixed thank you guys it was the actual file I downloaded the problem downloaded a different regions an all worked Ok, will mark as solved.
bligui said:
Fixed thank you guys it was the actual file I downloaded the problem downloaded a different regions an all worked Ok, will mark as solved.
Click to expand...
Click to collapse
Clicking thanks will suffice
Related
I tried to root my samsung galaxy s4 i9505 using odin, the process failed and now i cant turn on my phone because i keeps saying there is a problem with the firmware. my phone wont connect to kies either.. ive tried to flash the firmware on to the phone but it never works please help!!!
danielc766 said:
I tried to root my samsung galaxy s4 i9505 using odin, the process failed and now i cant turn on my phone because i keeps saying there is a problem with the firmware. my phone wont connect to kies either.. ive tried to flash the firmware on to the phone but it never works please help!!!
Click to expand...
Click to collapse
Why You Need Kies after using Odin Flash firmware with Odin
Even if you have this message - "there is a problem with the firmware"
This is also a download mode reconnect cable and Flash
Adnan73 said:
Why You Need Kies after using Odin Flash firmware with Odin
Even if you have this message - "there is a problem with the firmware"
This is also a download mode reconnect cable and Flash
Click to expand...
Click to collapse
every time i try to flash it fails
danielc766 said:
every time i try to flash it fails
Click to expand...
Click to collapse
U dont tell us what fails appears in Odin, but anyway i let u one guide u can follow for root ur phone correctly: HERE
Joku1981 said:
U dont tell us what fails appears in Odin, but anyway i let u one guide u can follow for root ur phone correctly: HERE
Click to expand...
Click to collapse
im trying to flash it with stock firmware and a pit file but i keeps saying re partition failed and when i try to turn it on it is the same message about plugging my phone into kies to fix the firmware
danielc766 said:
im trying to flash it with stock firmware and a pit file but i keeps saying re partition failed and when i try to turn it on it is the same message about plugging my phone into kies to fix the firmware
Click to expand...
Click to collapse
Go to Apps - Settings - More - About device and make us a beatiful screenshoot for take a look what happend
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. now it says odin program failled.ive reinstall the odin program same thing hellllp
ron31 said:
im trying to install stock firmware on bell im using file from sams mobile i337mvlucmk5 unzip file its in tar file i put phone in download mode and try to install file with odin and it fails. Now it says odin program failled.ive reinstall the odin program same thing hellllp
Click to expand...
Click to collapse
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
X_DroiD_X said:
what version of odin do you have? And are you placing the .tar in the correct slot? What error message does it give out in that little window it wouldnt happen to fail at [nand (auth) fail!!] would it?
Click to expand...
Click to collapse
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
ron31 said:
im using version 3.07 im placing tar in pda it fails nan write start then fails i have repartion un checked
Click to expand...
Click to collapse
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
X_DroiD_X said:
about the odin sayin it fail dont worry about that its based off timer after running for certain time it shuts itself off but as suppose to your file flash smh thats what i was trying to say bu yaks my friend you got yourself a bad signatures tar what exactly is the case here bro? like are your trying to unroot? or whats happening brief me on it like why your trying to reflash stock that way can help you better or least point you in the right direction you can find my contact info on my op faster response time quicker replies
if your phone happens to turn on at all navigate to about device and take a screen shot for capturing model built n baseband and add model number please carrier as well
Click to expand...
Click to collapse
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
hednik said:
I believe Odin V 3.09 works better. Also it must be flashed in the PDA slot
Click to expand...
Click to collapse
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
hednik said:
So you are using 3.07 and you can put it in download mode ? Are you then able to have the device recognized by odin ? You are then trying to flash the same firmware that came on your phone stock ?
Click to expand...
Click to collapse
yes odin reconizes phone i downloaded firmware from sams mobile for bell i337m
Based of at&t, t-mbl, bell roger virgin mobile fix mk2/mj9 mdl/mi9 4.3
ron31 said:
it all started when i tied to restore file with cwm recovery and it wouldn t install i tried a few times it wouldn t install backup.it reboot it would stay on samsung logo. i whent to download mode to install factory firmware odin fails the blue bar on phone moved just a little and stays there now i cant even go to recovery to do a factory reset it vibrates shows the little blue writing at top of screen then it reboots to samsung logo, i tried another factory file from here same issue i tried a different odin 1.85program same results
Click to expand...
Click to collapse
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
X_DroiD_X said:
PROCEED AT OWN RISK!!
IF THE ONLY THE DOWNLOAD IS COMING UP BRO NOTHING ELSE YOUR WHOLE FILE SYSTEM IS CORRUPTED AND UR EFS ALL GONE G YOU NEED TO DO A NAND FLASH GET YOURSELF ODIN 3.09V LEME KNO WHEN YOU GOT THAT IN THE MEAN TIME AMA GATHER SOME OF MY PERSONAL FILES FOR YOU INTO A ZIP TO HELP YOU OUT I KNO HOW THAT FEELS WAS IN YOUR SHOES THAN AGAIN EVERYBODY HAS ITS JUS TO BAD HOW SOME OF THE SENIORITY MEMBERS HERE FORGET ABOUT THERE NOOB DAYS LIKE THEY WAS BORN DEVS (NOT THAT AM SAYIN UR A NOOB) these should help you out------>>>>>>>:good:http://https://docs.google.com/open?id=0B1ZauuplxoZsYllTT3Z4YnlWc1k
Click to expand...
Click to collapse
iok thanks bro ill try tonight
ron31 said:
iok thanks bro ill try tonight
Click to expand...
Click to collapse
ok i have odin 3.09 installed i tried to open link you put in post wont open
ron31 said:
ok i have odin 3.09 installed i tried to open link you put in post wont open
Click to expand...
Click to collapse
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Gage_Hero said:
Did you do a checksum on the file you downloaded? I tried installing a modem on my i337m, same thing odin failed... downloaded the same file from a different source and success... unfortunately there was no md5 number on the file to do a checksum or I would have done that first.... when it comes to stuff like this I alway do checksum if the md5 is provided... (most times it is)
Click to expand...
Click to collapse
no how do you do that
ron31 said:
no how do you do that
Click to expand...
Click to collapse
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Gage_Hero said:
Download checksum tool from here http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html its free. Then you find the md5 number on the site you downloaded from and use the tool to compare the numbers, typically you navigate to the directory the file is in (this gives you the md5 number, then you copy paste the md5 number from the site, then click the compare button, if they don't match your download is not good and should download again and repeat the checksum.
Click to expand...
Click to collapse
hey thanks ill give it a try
Having major issues with my note 4.
I rooted the device with CF and had no problem, I think tried to install the CWM recovery and kept getting a FAIL in odin.
Tried different USB ports, different cables and 3 different computers.
I read to try unrooting then flashing recovery and then root again.
Once I unrooted the phone was stuck in a boot-loop and I still can't flash anything to the phone, not even CF-Root now, just bombs out with a fail.
I think I might need to re-partition the device, but need a PIT file for the note 4 please. All the phone displays now is a picture of a phone a yellow triangle and a computer, I have tried connecting kies but it says the phone is not supported, maybe because it is a korean model.
Thank you in advance
Ok starting to get massively confused now.
I have managed to flash the original firmware back to the phone, I can now do this everytime without fail via odin
But I cannot flash CF-Root or CWM recovery, everytime I get a fail error, even though i was able to flash CF-Root the other day.
Anyone got any ideas please, thank you in advance
Right I have sussed it, reactivation lock was enabled, disabled this and all working fine
Sent from my SM-G900F using Tapatalk
lysaer said:
Having major issues with my note 4.
I rooted the device with CF and had no problem, I think tried to install the CWM recovery and kept getting a FAIL in odin.
Tried different USB ports, different cables and 3 different computers.
I read to try unrooting then flashing recovery and then root again.
Once I unrooted the phone was stuck in a boot-loop and I still can't flash anything to the phone, not even CF-Root now, just bombs out with a fail.
I think I might need to re-partition the device, but need a PIT file for the note 4 please. All the phone displays now is a picture of a phone a yellow triangle and a computer, I have tried connecting kies but it says the phone is not supported, maybe because it is a korean model.
Thank you in advance
Click to expand...
Click to collapse
How do you manage to fix the bootloop without a pit file?
I got the original firmware from sammobile and flashed that
Sent from my SM-G925F using Tapatalk
lysaer said:
I got the original firmware from sammobile and flashed that
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Have you encounter "NAND write start" "FAIL"?
fannyman said:
Have you encounter "NAND write start" "FAIL"?
Click to expand...
Click to collapse
I did, but I cannot remember what I was trying to do at the time.
Are you flashing the original firmware from Samsung?
Sent from my SM-G925F using Tapatalk
Hello everyone. Can anyone help me to solution problem. I have Note 4 SM-N910K after unsuccessful attempts firmware via Smart Switch. I got error and no successful firmware. And want to back., but get fail via odin. I think i need pit file. If someone have just put link please. Thank's for advance.
Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!
hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo
Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku
hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk
Thanks All for help
Did you solve the problem?
I recently received a Samsung Galaxy S4 from my friend as my old phone broke. When i got it, i tried to go into recovery mode and it didn't work and ended up in going in a boot loop. Every time i try and go on recovery mode it says "movinand checksum confirmation fail", so last night i decided to run Odin and flash new firmware on the device and every time i tried to flash it, it says "There is no PIT partition", so i looked around for some pits and i tried flashing them with the firmware, by themselves and i even changed to 3 different cords and when i do it keeps saying "re-repartition operation failed". I have spent way to long on this and i need help!!!
Have you tried using an original Samsung USB cable? Tried different USB ports?
audit13 said:
Have you tried using an original Samsung USB cable? Tried different USB ports?
Click to expand...
Click to collapse
I have tried all 5 ports on my Desktop computer with three different Cables.
What about using Odin 3.07? Tried flashing without a pit file? What happens when you try to enter recovery?
audit13 said:
What about using Odin 3.07? Tried flashing without a pit file? What happens when you try to enter recovery?
Click to expand...
Click to collapse
I have been using Odin 3.12, I will try with 3.07. I have tried flashing without a pit file and when I try to go into recovery mode it says "movinand checksum confirmation fail"
Where did you get the stock ROM? You are flashing the ROM as a single file in the PDA/AP slot?
audit13 said:
Where did you get the stock ROM? You are flashing the ROM as a single file in the PDA/AP slot?
Click to expand...
Click to collapse
I tried two different stock ROMS, 1st from sammobile (it was a Optus Australia Rom for GT-I9505) PA and another rom for Samsung Galaxy S4 with BL,PA,CP,CSC and neither of them worked. Yes i used the PDA/PA spot on both Odin 3.07 and 3.12
audit13 said:
Where did you get the stock ROM? You are flashing the ROM as a single file in the PDA/AP slot?
Click to expand...
Click to collapse
Here is a couple of pictures of the problem!
View attachment 4336085
View attachment 4336086
View attachment 4336087
Well shame nobody can help i need device fixed soon, to be able to contact my manger.
Honestly, I don't think anyone can help here. You want to have a tech look at it, but I believe the flash memory may have failed. It would explain both why you can't get into recovery as well as why you get errors saying there is no pit partition and re-partition failed in Odin.
Strephon Alkhalikoi said:
Honestly, I don't think anyone can help here. You want to have a tech look at it, but I believe the flash memory may have failed. It would explain both why you can't get into recovery as well as why you get errors saying there is no pit partition and re-partition failed in Odin.
Click to expand...
Click to collapse
If the flash memory failed, that would explain a lot, Thanks for your insight
Either the memory is damaged or the pit file is not correct, or both.
Jtag may be the only solution.
audit13 said:
Either the memory is damaged or the pit file is not correct, or both.
Jtag may be the only solution.
Click to expand...
Click to collapse
Could you provide me with a correct pit File for "Samsung Galaxy S4 GT-I9505 Australia, Telstra"
And if that doesn't work i will learn about Jtag and try and perform it.
I'm not sure which pit would be correct as I don't have this phone. I am in Canada and this phone was not for sale here.
This may help: https://forum.xda-developers.com/showthread.php?t=2265477
audit13 said:
I'm not sure which pit would be correct as I don't have this phone. I am in Canada and this phone was not for sale here.
This may help: https://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
I have tried following that article a couple of times, yet the PIT they provided isn't for my region
Pit files are not usually region specific.
audit13 said:
Pit files are not usually region specific.
Click to expand...
Click to collapse
Well i have tried all available PITS file included here:
JFLTE_EUR_OPEN.pit
JFLTE_EUR_OPEN_16G.pit
9505.pit
CSB_signed_Fusion3_EUR_0325_V2.pit
None of them worked, so i don't know anymore might try a JTAG connection test (first time)
I get the exact same error in odin "there is no pit partition" when i try to flash Kitkat rom/ custom recovery/ root in odin.
Yeh, still haven't been able to fix my problem
hi.my phone was same problem.did you fixed your phone?