Related
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
I'm just gonna wait until a stock 4.3 rom comes out that supports safestrap so I can keep root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
Since you are rooted with a custom recovery you CAN flash 4.3 now without losing root. Just use ShoStock-i MJ9 4.3http://forum.xda-developers.com/showthread.php?t=2468860
Or VisionX MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2391142
Or Deadly Venom MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2503692
and POSSIBLY a couple other 4.3 Touchwiz firmwares that are found in the Android Development Section
These are all from he International MJ9 firmwares but to me are better than the ATT firmwares for 4.3. The ATT 4.3 removed the Data Toggle completely from the pulldown menu and now you have to go into settings each time to turn it on or off. Plus other changes that are solely LACKING compared to the international firmwares. I have tried two of the above and they are both great and the third from what I have read works great as well. They are all great devs. Try them out and I suggest using the Jeboo 3.0 kernel for best results.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I concur with RockRatt. Shostock-I is smooth. It is bundled with jeboos 3.0 kernel. Love it. Biased, though. I've been using Sho's roms since my/his s2 days..
Sent from my TARDIS
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
mrpeters said:
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Click to expand...
Click to collapse
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
jball said:
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I only gave the advice above because he said he is ROOTED WITH MOTOCHOPPER ON MF3. As we know MF3 cannot be rooted with motochopper. So I was guessing that he rooted while on MDL or MDB with motochopper and used a ROM to upgrade to MF3.
So unless he is/was mistaken with those comments and he meant to say rooted on MF3 with safestrap then I would of told him to look at the safestrap threads.
Hopefully he clears things up with that as I WON'T want to give him Bad Advice.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I didn't quote anybody for a reason.just stating facts based on my reading the OP post.its all good
Sent from my ATT S4 MF3 using Tapatalk
Yea there's a difference between having a phone shipped with MF3 and having upgraded to MF3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
Sent from my ATT S4 MF3 using Tapatalk
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
mrpeters said:
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
Click to expand...
Click to collapse
well my touch screen has stopped working, so now this phone gets to go back to AT&T for repairs.
whats the best way to remove root and factory default it?
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
mrpeters said:
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
Click to expand...
Click to collapse
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
jd1639 said:
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
mrpeters said:
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
Click to expand...
Click to collapse
You could flash 4.3 MK2 with odin then root with saferoot.
The 4.3 tar can be found here http://d-h.st/wH3 The pit here http://d-h.st/5gz
Saferoot can be found here http://forum.xda-developers.com/showthread.php?t=2565758
jball said:
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
My MDL updated itself when I went back to stock and forgot to disable OTA. Now that I'm locked into TW, is there a reason NOT to update to MK2? I know that it will install KNOX but with saferoot and safestrap, I'll have the same functionality of my rooted MF3?
Click to expand...
Click to collapse
I am at the same place in my phone. Were you ever able to update to 4.3 I need to do the same to have access to certain options and apps
Will my At&t S4 get the Kit Kat update even if it is rooted.
Nope, a message will pop up if you click the update button
Sent from my SGH-I337M using xda app-developers app
AznBoy00 said:
Nope, a message will pop up if you click the update button
Sent from my SGH-I337M using xda app-developers app
Click to expand...
Click to collapse
Mine, downloaded the whole update but stopped installing it at 28%. Tried it 2 times and there was no pop up error.
Any idea why?
Tried a 3rd time after uninstalling Safetrap and still no go after 28% on the installing process.
Update Failed is the message and then the phone reboots
Guys: If you are not on stock MK2 then update to NB1 will fail - You will need to ODIN back to stock MK2 then accept OTA
Link to ODIN to stock => http://forum.xda-developers.com/showthread.php?t=2621279
Or flash straight to NB1 via the .tar files on this post:
http://forum.xda-developers.com/showthread.php?t=2663545
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Sorry, OP. Rooted phones almost always never get OTA. Unroot if you really want it (there's no root for AT&T KitKat yet!). However, if it still won't let you get KitKat (usually errors at 24-25%?) then I don't know how else to help.
If I'm wrong, feel free to correct me!
Dabreaker9 said:
Sorry, OP. Rooted phones almost always never get OTA. Unroot if you really want it (there's no root for AT&T KitKat yet!). However, if it still won't let you get KitKat (usually errors at 24-25%?) then I don't know how else to help.
If I'm wrong, feel free to correct me!
Click to expand...
Click to collapse
There is now Kit Kat 4.4.2 with root. XDA did the seemingly impossible once again. Listed in the all things mk2 & nb1 guide.
http://forum.xda-developers.com/showthread.php?t=2616221
currently I am outside us i want NC1 Frimware to upgrade with out rooting my device
ٍSorry i but it on wrong place i want to move it to question sections i am sorry for that
The NC1 update is provided by your carrier. You should just be able to do a check for updates on your device and it'll find it. Please know that it's a very recent update and not much is known about how it affects custom ROMs or the rooting process. I updated to it and I'm waiting to see what the experts here say.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
5erv0 said:
The NC1 update is provided by your carrier. You should just be able to do a check for updates on your device and it'll find it. Please know that it's a very recent update and not much is known about how it affects custom ROMs or the rooting process. I updated to it and I'm waiting to see what the experts here say.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My carrier is At&t and they don't allow any update out the US
There was another thread I posted this to but for some reason the OP wanted the thread deleted.
So here is the link to the file I was pushed.
https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
0o0nano0o0 said:
My carrier is At&t and they don't allow any update out the US
Click to expand...
Click to collapse
Currently living in Japan and my i337 took the 4.3 and 4.4 updates just fine prior to rooting.
Sent from my SGH-I337 using XDA Premium 4 mobile app
0o0nano0o0 said:
currently I am outside us i want NC1 Frimware to upgrade with out rooting my device
ٍSorry i but it on wrong place i want to move it to question sections i am sorry for that
Click to expand...
Click to collapse
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
braindead444 said:
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
Click to expand...
Click to collapse
We could never downgrade to mf3, only a partial downgrade to MK2 from nb1. And jeboo already said the nc1 bootloader does not increment the q fuse counter so you can still go back to nb1 if you want...
braindead444 said:
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
Click to expand...
Click to collapse
dmc2359 said:
We could never downgrade to mf3, only a partial downgrade to MK2 from nb1. And jeboo already said the nc1 bootloader does not increment the q fuse counter so you can still go back to nb1 if you want...
Click to expand...
Click to collapse
On top of that, the exploit is at the kernel level. We can still get the MK2 kernel so we can still get the exploit. That's why bypasslkm still works on the downgrade.
Sent from my SGH-I337 running Blackbox 3.0
I was Odining back to stock MK2 and after it was finished I set it up then went outside real quick. Came back and phone said it was updated to this NC1 firmware and this happens when looks like potential progress on the "serious about unlocking bootloader" thread f u ATT.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Thread moved :good:
raulz28 said:
I was Odining back to stock MK2 and after it was finished I set it up then went outside real quick. Came back and phone said it was updated to this NC1 firmware and this happens when looks like potential progress on the "serious about unlocking bootloader" thread f u ATT.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Don't worry, chances are exploits will function still if one is found, and if Hashcode implements kexec you'll still be fine.
0o0nano0o0 said:
My carrier is At&t and they don't allow any update out the US
Click to expand...
Click to collapse
I think you should be able to connect through a proxy and download the update over wifi that way. Note that the update will only work over WiFi... not mobile data. I hope you get it worked out.
CAG-man said:
There was another thread I posted this to but for some reason the OP wanted the thread deleted.
So here is the link to the file I was pushed.
https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sir,
Download the OTA package I337UCUFNC1 19MB Zip File
This Link Not Working : https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Unavailable To Download
Plz Give Fresh Link :
Plz Upload Official NC1 Update 19MB ... I Can't Download Plz Upload Another Link I Need Sir
Plz Help Me :crying:
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
zeusakatkm said:
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
Click to expand...
Click to collapse
Please tell us the firmware of your phone (baseband, modem, etc..)
I337 has locked bootloader if your firmware is MF3 and above (MK2, NB1, NC1). You have to use the safestrap as a recovery if you want to flash the custom roms. If you want to flash SlimKAT you have to the SlimKAT safestrap version if they have one.
If he had to use Safestrap he can't use Slimkat as it's AOSP and he can't change the kernel. Chances are if he was getting issues flashing aboot then he's on a newer version. Confirm it in the about phone section of the settings though.
Sent from my SGH-I337 running GPE
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
zeusakatkm said:
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
drock212 said:
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
zeusakatkm said:
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
Click to expand...
Click to collapse
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
shamelin73 said:
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
Click to expand...
Click to collapse
Does it matter if I use the rootable version?
I would use the non root one then let phone take the NC1 OTA update.
That shod give you a clean slate to sell the phone or you can root NC1 with towelroot
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've already flashed the stock one, but it says there is no software update available
I've already flashed the stock one, but it says there is no software update available
UPDATE!
Success! I am successfully running this rom
http://forum.xda-developers.com/showthread.php?t=2767026
My playstore not working said. " cant initialize...."
I know the cause of this is the freedom. I used freedom when im in kitkat official. Im also rooted that time. Then i forgot to delete the "host" file before updating. Now my "at&t galaxy s4 is 5.0
1 official" can someone help me root this device pls. To fix this problem ? Or any fix/method to this problem without root ?
I also dont know what is lock and unlock bootloader, even how to check if i have lock or unlock bootloader. What does it mean if i have lock and unlock bootloader
Note: my galaxy s4 is at&t 5.0.1 not rooted.
My galaxy s4 at&t can read any sim card because its already factory unlocked.
First, freedom is warez. DO NOT USE IT. To get you're phone working properly again you'll most likely need to flash the nb1 firmware in Odin. You can then work on rooting your device and getting back to 5.x. But you'll have to read this very carefully first, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
My s4 att is already in 5.0.1 can i still use that ?
Can u teach me how?
How can i downgrade from 5.0.1 to kitkat again if thats posible.
Or how can i root this 5.0.1 if thats possible.
Someone said att has lock bootloader , i really dont know whats that.
Sent from my GT-N7100
dxtrr2894 said:
My s4 att is already in 5.0.1 can i still use that ?
Can u teach me how?
How can i downgrade from 5.0.1 to kitkat again if thats posible.
Or how can i root this 5.0.1 if thats possible.
Someone said att has lock bootloader , i really dont know whats that.
Sent from my GT-N7100
Click to expand...
Click to collapse
All at&t i337's have a locked bootloader. So don't worry about that. Carefully read the link I gave you. Yes it's long and yes it's going to take a lot of reading and re-reading before it makes sense. And yes you can downgrade to kitkat, nb1, and yes you can have root on 5.0. Look at how to flash nb1 in Odin, how to update to nc1 and root, and how to keep root to oc3, 5.0.
Sent from my Nexus 9 using XDA Free mobile app
Sir. My s4 is 5.0.1 not 5.0 can i still do what u are saying ?
Sent from my GT-N7100 using XDA Free mobile app
dxtrr2894 said:
Sir. My s4 is 5.0.1 not 5.0 can i still do what u are saying ?
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I was lazy and didn't want to type 5.0.1.
Pls help me step by step ?
What should i do 1st. Dont worry i know how to flash thru odin . I just dont know how to downgrade and whats is nb1 etc. Also what is tools and method
What method or tools to downgrade my att s4 5.0.1 to kitkat ??
Sent from my GT-N7100 using XDA Free mobile app
What should i do 1st in my galaxy s4 5.0.1?
Should i Flash nb1 thru odin 1st ?
Or downgrade to kitkat 1st ? (Im sorry bro. In your link i cant see any method to downgrade) pls teach me how. Thanks and Godbless
Sent from my GT-N7100 using XDA Free mobile app
dxtrr2894 said:
Pls help me step by step ?
What should i do 1st. Dont worry i know how to flash thru odin . I just dont know how to downgrade and whats is nb1 etc. Also what is tools and method
What method or tools to downgrade my att s4 5.0.1 to kitkat ??
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
dxtrr2894 said:
What should i do 1st in my galaxy s4 5.0.1?
Should i Flash nb1 thru odin 1st ?
Or downgrade to kitkat 1st ? (Im sorry bro. In your link i cant see any method to downgrade) pls teach me how. Thanks and Godbless
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
The people who contribute here donate their time to the forums. Usually, they do it because they like to help others. For many it is like a hobby.
However, there is already a lot of information collected here on the forums. Most people don't really enjoy saying the same things over and over. And besides, it is not really very polite to ask someone hold your hand, when you can find the information and process it yourself.
Most people here would say, if you can't understand the directions, then you shouldn't probably be trying to modify your phone. So, to re-iterate what jd said, read the instructions, read them again, and again if necessary. Only proceed when you understand what you are doing. If something doesn't make sense to you, ask a specific question and someone will be happy to explain.
What should I do first?
Click to expand...
Click to collapse
You should flash nb1 using desktop Odin. This will return your phone to fully stock I337UCUFNB1 which is KitKat 4.4.2.
You may also want to read through this thread several times.
Is the nb1 is universal ? I mean, how can i know if this fits in my device ? I337 att
Can i use any versio of odin ? Or the latest ?
Thanks alot. Ill try tomorrow. Its 1am here thanks bro. But just for now ill look for nb1 download link
Sent from my GT-N7100 using XDA Free mobile app
dxtrr2894 said:
Is the nb1 is universal? I mean, how can i know if this fits in my device ? I337 att
Click to expand...
Click to collapse
nb1 is shorthand notation for I337UCUFNB1, as I said in my previous post. The first part (I337) tells you that it is for your phone.
Can i use any version of odin? Or the latest?
Click to expand...
Click to collapse
Any version of Odin should work okay. Odin3 v3.09 is usually used with the S4.
Thanks alot. Ill try tomorrow. Its 1am here thanks bro. But just for now ill look for nb1 download link
Click to expand...
Click to collapse
Follow the link in my previous post, which leads to the thread "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap." In that thread, you will find links to all the downloads you need.
Again, read until you understand.
AFTER THE NB1 WHATS NEXT ? i downloaded the nb1 rootable. Later ill flash it thru odin.
Thankks in advance
Sent from my GT-N7100 using XDA Free mobile app
If you want rooted Lollipop, see this thread.
Please follow my advice, and read until you understand.
I flash the nb1 im from 5.0.1 att s4.
I got fail for just a sec.
I try different cables . And different port
Still i always got failed
NOTE : FOR JUST ONLY A SEC.
The nb1 i downloaded is the one rootable. With towel root.
What do you think is the problem here ?
Sent from my GT-N7100 using XDA Free mobile app
Odin NB1 from here http://forum.xda-developers.com/showthread.php?t=2674223
Sent from my i337 on dark carnage rom
Cant find the download link. Pls give me.? Maybe its been flooded by many reply
Sent from my GT-N7100 using XDA Free mobile app