I followed some instructions here given to me to put a custom rom on I updated to the NF1 baseband just fine and rooted it fine but I have downloaded and redownloaded TWRP and cannot find openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar after extracting it therefor leaving me nothing to be able to run/install any direction as to why I am incountering this? Thank you P.S I think I just solved it I downloaded the zip file not the .tar
re: odin TWRP tar file
stickies said:
I followed some instructions here given to me to put a custom rom on I updated to the NF1 baseband just fine and rooted it fine but I have downloaded and redownloaded TWRP and cannot find openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar after extracting it therefor leaving me nothing to be able to run/install any direction as to why I am incountering this? Thank you
Click to expand...
Click to collapse
Here is the TWRP open recovery tar you need:
https://dl.dropboxusercontent.com/u/45687485/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
You don't need to extract anything, simply flash this TAR file using Odin.
Good luck!
Misterjunky said:
Here is the TWRP open recovery tar you need:
https://dl.dropboxusercontent.com/u/45687485/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
You don't need to extract anything, simply flash this TAR file using Odin.
Good luck!
Click to expand...
Click to collapse
Thank you I see I was not suppose to download the zip
Related
hi i was using bobcatrom on my s4 but thought i would try evil rom ,i installed rom to my ex sd card flashed rom through cwm it got 10% through and booted to galaxy screen ,i then went into cwm and tried the bobcat rom but the same happened,i then went to sam firmware and dowloaded stock ,it is the form of a zip ,how do i flash this zip using odin,please help has i need my phone urgently many thanks
someone please
I think you need to extract the contents of zip first.
Sent from my GT-I9505 using xda app-developers app
Search and you shall find: http://forum.xda-developers.com/showthread.php?p=41072426
xyzulu said:
Search and you shall find: http://forum.xda-developers.com/showthread.php?p=41072426
Click to expand...
Click to collapse
yes i did find that ,but it takes me over 2 hours to download file
i have bootloader
csc
modem
platform
in the zip ,what goes where in odin please cheers
westentertainer said:
yes i did find that ,but it takes me over 2 hours to download file
i have bootloader
csc
modem
platform
in the zip ,what goes where in odin please cheers
Click to expand...
Click to collapse
You've unzipped 1 too many times.
You need the .Tar file.
Flash this in PDA section of Odin and you're good to go!
I would recommend formatting cache, data, system and preload in CWM first.
xyzulu said:
Search and you shall find: http://forum.xda-developers.com/showthread.php?p=41072426
Click to expand...
Click to collapse
Obagleyfreer said:
You've unzipped 1 too many times.
You need the .Tar file.
Flash this in PDA section of Odin and you're good to go!
I would recommend formatting cache, data, system and preload in CWM first.
Click to expand...
Click to collapse
i managed to get it up and running again now thanks, by putting the single tar files in the appropriate sections in odin
westentertainer said:
i managed to get it up and running again now thanks, by putting the single tar files in the appropriate sections in odin
Click to expand...
Click to collapse
Good idea is to KEEP a copy of the stock rom for these little incidents... It is easier, and sometimes the only way, to flash the stock rom after a bad flash...
If you have the I9505 I would suggest buying Mobile ODIN... It makes flashing ALL roms so much easier... You do need to root the phone 1st though with PC ODIN. After that you can flash the tar files through it or the custom rom zip files... Mods can be flashed easily too.
since no one has suggested a nandroid backup, i am going ahead and doing that.
i have found it to be the most helpful when things go wrong
i am having this prob i have lost wifi on my gs i337m it was rooted i tried to install stock rom for telus it says it install but im still rooted imusing this file is this correctC:\Users\Ronald\Downloads\KERNEL-TLS-I337MVLUAMG1-1372666261.tar i have been trying for 4 hours nows helllp
That's not the complete firmware. Go to sammobile.com. You'll download a zip and extract the .tar.md5 file from it. You'll flash that in Odin.
loi
jd1639 said:
That's not the complete firmware. Go to sammobile.com. You'll download a zip and extract the .tar.md5 file from it. You'll flash that in Odin.
Click to expand...
Click to collapse
thanks for the help got it
About to do a warranty on my Galaxy Note 3 for VZW but I had it rooted with kingo and safetrap installed I removed safetrap and wanted to know what else I need to look and do to ensure that is back to stock and not recognized as modified as well as where do I go to determined everything is ok onces all is done. Appreciate the help:silly:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
hctimin said:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
Click to expand...
Click to collapse
So as long as on download mode shows Knox 0x0 I'm good right?
Jun1orV said:
So as long as on download mode shows Knox 0x0 I'm good right?
Click to expand...
Click to collapse
Correct. Also make sure that it says samsung official firmware, which is will if you are successful.
♢NoteIII♢
Thanks everything was succeful
Hi Everyone,
The Note 4 is my first Android phone and I've been doing a lot of reading the last two hours.
I want to install CyanogenMod because I hate the TouchWiz look. So I discovered I need to root my phone and install a custom recovery. I've rooted my phone successfully but I cannot find the Note 4 listed on the CWM website.
So how do I install a custom recovery on Note 4 N910W8?
TWRP http://teamw.in/project/twrp2/266
Thanks for the link!
Do you happen to have install instructions?
I see a .img, .tar, and a .zip file.
What do I do with them? My first guess was to download the .tar file and use it in Odin with the PDA button (like when I rooted with CF), but selecting the file crashes Odin so I assume that is incorrect.
MeitanteiJesus said:
Thanks for the link!
Do you happen to have install instructions?
I see a .img, .tar, and a .zip file.
What do I do with them? My first guess was to download the .tar file and use it in Odin with the PDA button (like when I rooted with CF), but selecting the file crashes Odin so I assume that is incorrect.
Click to expand...
Click to collapse
I downloaded the IMG file one and then I installed the Flashify app from the Google play store and used that to install the IMG recovery.
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
When i look into it it has only one file .tar.md5
i tried to extarct it using winrar and it says file is corrpted
\BTU-N910FXXS1DQFA-20170726090446.zip: The archive is corrupt
Although it extracted the N910FXXS1DQFA_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5
In both files i got the same result same
i dont know what to do now
I tried Odin and it stuck at "there is no pit file partition" or something like that
(yes i wiped out cache and system delvik etc.)
I also tried inserting PIT file but no luck
i would prefer without Odin if possible
As I can go into TWRP recovery
Please guide me or at least answer a few question
1. Is it even possible to flash stock rom using twrp like i flash other roms?
2. Can i install extracted .md5 file from that zip? will it be the same like stock zip?
3. Why my Both zip files are corrpted? your opinion?
4. Should i download again same stock rom?
5. Can / Should i flash or download and /or downgrade Stock firmware (same 6.0.1 )but different release date?
6. Am i downloading the right firmware for my device here is my device details posted??
Lot of confusion please help i want to go back to stock for my gear VR
Based on the amount and type of questions, I believe you need to read up on basic Note 4 flashing/customization knowledge first. Go and read up on the stickies.
Without knowledge and experience, we can tell you how to do a brain surgery, but doesn't make you a surgeon.
No, twrp cannot be used to flash stock rom. Stock rom are most of the time md5 files, used by ODIN only.
Since you downloaded the zip files, use the "Test" function to see if it is corrupted?
Maybe you should just flash a stock based custom rom with VR and be done with it.
https://forum.xda-developers.com/no...om-bob4-devbase-multi-csc-safe-bloat-t3033881
---------- Post added at 01:13 PM ---------- Previous post was at 01:05 PM ----------
Oh, according to your screen shots, DBT is in a carrier in Germany?
I installed BTU (UK) stock rom and it is is working fine (using odin)
nicholes said:
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
==================================================
Check your Winzip version. It may be old and doesnt handle large zipfiles too well. I had the same problem but I know the file was good as I downloaded it at work, and Winzip worked just fine; but when I got home, winzip failed on my pc - old 8.1 version. I used the trial version just fine to unzip.
Click to expand...
Click to collapse
Flashing Rom
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Fool2242 said:
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Click to expand...
Click to collapse
As far as I remember it was zip file