[Q] Can't seem to install ZIPs from CWM Recovery Anymore - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi All,
I have been trying a few different ROMs out over the last day, as I've found CM11 to be brutally unstable, and I had settled on FoxHound, except it decided to completely lock out my mobile data, so I had to try something else.
I went to install Infamous to give it a whirl, and when I click on Install Zip > Install Zip from /extsdcard > picked .zip from the list, CWM Recovery just flashes a black screen, and returns to the main menu.
This happens regardless of which zip file I use, I've rebooted several times including pulling the battery, and had no success.
I was able to restore a rooted stock backup and get my phone at least working again, but I'm curious to know if anyone has an idea why CWM is suddenly acting so strange?
Thanks,
MC

MrChocholate said:
Hi All,
I have been trying a few different ROMs out over the last day, as I've found CM11 to be brutally unstable, and I had settled on FoxHound, except it decided to completely lock out my mobile data, so I had to try something else.
I went to install Infamous to give it a whirl, and when I click on Install Zip > Install Zip from /extsdcard > picked .zip from the list, CWM Recovery just flashes a black screen, and returns to the main menu.
This happens regardless of which zip file I use, I've rebooted several times including pulling the battery, and had no success.
I was able to restore a rooted stock backup and get my phone at least working again, but I'm curious to know if anyone has an idea why CWM is suddenly acting so strange?
Thanks,
MC
Click to expand...
Click to collapse
You back up to stock? so you need to reflash CWM

hhai2pth said:
You back up to stock? so you need to reflash CWM
Click to expand...
Click to collapse
CWM still works and I can boot into recovery just fine as well as backup/restore.. Not totally back to stock, just the generic Samsung TouchWiz ootb rom but rooted.

MrChocholate said:
CWM still works and I can boot into recovery just fine as well as backup/restore.. Not totally back to stock, just the generic Samsung TouchWiz ootb rom but rooted.
Click to expand...
Click to collapse
So you just try another .zip? maybe that file had corrupted( .zip in OP)

hhai2pth said:
So you just try another .zip? maybe that file had corrupted( .zip in OP)
Click to expand...
Click to collapse
I tried about 5 different zip files. 2 that were newly copied and 3 that were already on my card and I had previously installed..

MrChocholate said:
I tried about 5 different zip files. 2 that were newly copied and 3 that were already on my card and I had previously installed..
Click to expand...
Click to collapse
flash twrp or philz and see how it goes
Sent from my SM-N9005 using Tapatalk

MrChocholate said:
I tried about 5 different zip files. 2 that were newly copied and 3 that were already on my card and I had previously installed..
Click to expand...
Click to collapse
Check signature verification.
Also match up md5s with the developers download site.
Twrp.

Related

Fresh Start

So i had to Odin back to stock because in whatever rom i used i wouldnt get vibration for text messages. This worked fine and i flashed back to eugenes stock jk2 that was prerooted. Now i need to install new roms again and im having trouble. I have rom manager installed and superuser was already there. I got the rom on the sd card (tried with multiple roms), but when i go to flash the roms it fails because it can't verify the signature. Even when i go to fix permissions and reboot my phone like rommanager tells me to it cant flash a new rom. On the other roms i had i would just go to advanced options in recovery and disable verification checks but with the stock recovery i cant do this. So my main question is why isnt this option in cwm recovery and how can i get it there so i can start getting roms again. Thanks for anyone who takes the time to read this...
Make sure that you have CWM recovery flashed onto your phone using odin. Also make sure that whatever rom you install is on agreement with your software version.
Sent from my overclocked Fascinate using XDA App
yea maybe i need to try one of eugenes roms because its his froyo version? i have cwm because i installed it through rom manager (well at least i think i have it)
lavcoles said:
So i had to Odin back to stock because in whatever rom i used i wouldnt get vibration for text messages. This worked fine and i flashed back to eugenes stock jk2 that was prerooted. Now i need to install new roms again and im having trouble. I have rom manager installed and superuser was already there. I got the rom on the sd card (tried with multiple roms), but when i go to flash the roms it fails because it can't verify the signature. Even when i go to fix permissions and reboot my phone like rommanager tells me to it cant flash a new rom. On the other roms i had i would just go to advanced options in recovery and disable verification checks but with the stock recovery i cant do this. So my main question is why isnt this option in cwm recovery and how can i get it there so i can start getting roms again. Thanks for anyone who takes the time to read this...
Click to expand...
Click to collapse
Are you putting the rom on the internal memory?
Yea i copied it to the iternal sd, i see it on the internal sd, but the only way to reflash it is to rename it update.zip becauae all i can do is reinstall system packages
You have to download cwmrecovery, plug your phone in while in download mode and put cwmrecovery onto your phone. Just installing rom manager doesn't cut it and trying to flash anything will give the exact errors you're talking about.
Sent from my SCH-I500 using XDA App
how do you delete the post ?
So i put the cwm recovery in the phone slot in odin and reflash it?
lavcoles said:
Yea i copied it to the iternal sd, i see it on the internal sd, but the only way to reflash it is to rename it update.zip becauae all i can do is reinstall system packages
Click to expand...
Click to collapse
You put the rom Just on the internal sd card not any folders right?
its doesent matter at least for me if the rom is right there or in a folder no difference just file called update.zip need to be there (not in the folder )
and no ! u cant flash clockwork recovry thru odin ! loL both of these program u mentioned are intended to flash roms not to be flashed as rom p u can flash in clockwork recovery if the rome is made for it which would be packed with .zip file if its odin file it would be .tar not every rom is flashable thru odin or clockwork depends how devs made it
bartek25 said:
its doesent matter at least for me if the rom is right there or in a folder no difference just file called update.zip need to be there (not in the folder )
Click to expand...
Click to collapse
Something must have gotten corrupted in the file transfer. I know your fustrated . Have you tried repeating the odin process?
Yea it was on the internal sd, i mean iv probably flashed 20 different roms and i know how to move them between different file folders and how to access them ect... The only problem is basically that im stuck in stock which has a different recovery
nomadrider123 said:
Something must have gotten corrupted in the file transfer. I know your fustrated . Have you tried repeating the odin process?
Click to expand...
Click to collapse
No this sounds like a good idea though, maybe i should use a different tar file.
lavcoles said:
Yea it was on the internal sd, i mean iv probably flashed 20 different roms and i know how to move them between different file folders and how to access them ect... The only problem is basically that im stuck in stock which has a different recovery
Click to expand...
Click to collapse
Here is the update.zip that will flash you into clockwork from stock recovery. Put this on your phone's internal sd, reboot to recovery, and hit "reinstall packages". If your phone reboots to stock recovery again, hit reinstall packages again and the second time it should put you right into Clockwork Recovery. Good Luck.
Thank you this is what iv been looking for
NP Friend, let me know if it works for you.
Br1cK'd said:
NP Friend, let me know if it works for you.
Click to expand...
Click to collapse
wow it still says i cant flash the .zip file for some reason, it gives me the same error message about signature verification. I am rooted and i even rerooted but it didnt make a difference, thanks for trying to help though
lavcoles said:
wow it still says i cant flash the .zip file for some reason, it gives me the same error message about signature verification. I am rooted and i even rerooted but it didnt make a difference, thanks for trying to help though
Click to expand...
Click to collapse
What rom are you currently running, still on Eugene's JK2? If you Odin'd a stock file, you may have 2e recovery, not the modded 3e. Check this thread, it may help you out with the stock recovery issue. In fact untermensch mentions this kind of issue specifically in the OP. http://forum.xda-developers.com/showthread.php?t=833423
Br1cK'd said:
Here is the update.zip that will flash you into clockwork from stock recovery. Put this on your phone's internal sd, reboot to recovery, and hit "reinstall packages". If your phone reboots to stock recovery again, hit reinstall packages again and the second time it should put you right into Clockwork Recovery. Good Luck.
Click to expand...
Click to collapse
I just added this to the ACS, thanks for reminding me

can't seem to flash rome

Hey guys, I've been having some trouble trying out the cm 10.1.0 RC2 rom on my nexus 4.I have it rooted and currently run stock rom with franco kernel. I have all the files needed, transferred it to the partition, then go into cwm recovery and when I try to flash the zip, it aborts at installation with the dead android and at the top it always says "apply update from .zip fil on SD". I've tried many times but I'm stuck atm. I am hoping someone with experience can help me and hopefully my the morning I can get it working. Thanks for your help, I'm learning as I go along.
Edit: I'm running ClockworkMod Recovery v6.0.3.1
Bad download?
omgwtfitsp said:
Hey guys, I've been having some trouble trying out the cm 10.1.0 RC2 rom on my nexus 4.I have it rooted and currently run stock rom with franco kernel. I have all the files needed, transferred it to the partition, then go into cwm recovery and when I try to flash the zip, it aborts at installation with the dead android and at the top it always says "apply update from .zip fil on SD". I've tried many times but I'm stuck atm. I am hoping someone with experience can help me and hopefully my the morning I can get it working. Thanks for your help, I'm learning as I go along.
Edit: I'm running ClockworkMod Recovery v6.0.3.1
Click to expand...
Click to collapse
In recovery are you choosing "Apply update.zip from sdcard" ?
If thats the case you are flashing it incorrectly. You must choose "Install zip from sd card".
chromium96 said:
In recovery are you choosing "Apply update.zip from sdcard" ?
If thats the case you are flashing it incorrectly. You must choose "Install zip from sd card".
Click to expand...
Click to collapse
Sounds like the problem to me.
Rome wasn't built in a day, thus it will not be flashed in a day.
No but seriously, don't choose apply update.zip from sdcard. Unless you rename your rom to update.zip.
I apologize for the title typo. But to the others responding thanks for your help. I've downloaded the ROM straight off get.cm and in recovery I only select install from SD not apply update, so I'm not sure why it's saying that... I'll give it another shot
Sent from my Nexus 4 using xda app-developers app
EDIT: So I've tried re-downloading and its still not working somehow. I am choosing to install zip from sd card. But after aborting the installation, it'll always say apply update from zip at the top.
I even tried doing an auto-flash with the roms found on rom manager and once in recovery it still aborts installation. I don't understand what could be the problem, can anyone help?
omgwtfitsp said:
I apologize for the title typo. But to the others responding thanks for your help. I've downloaded the ROM straight off get.cm and in recovery I only select install from SD not apply update, so I'm not sure why it's saying that... I'll give it another shot
Sent from my Nexus 4 using xda app-developers app
EDIT: So I've tried re-downloading and its still not working somehow. I am choosing to install zip from sd card. But after aborting the installation, it'll always say apply update from zip at the top.
I even tried doing an auto-flash with the roms found on rom manager and once in recovery it still aborts installation. I don't understand what could be the problem, can anyone help?
Click to expand...
Click to collapse
Well that's strange. Do you have any place ai can contact you directly to help you? Like google plus or something?
Try TWRP instead of cwm and see if that allows you to correctly flash the rom.
exb0 said:
Well that's strange. Do you have any place ai can contact you directly to help you? Like google plus or something?
Click to expand...
Click to collapse
Hey thanks a lot for your concern, I actually managed to get it to work however, this time I used my phone directly to download the zip files. Before I would get the zip files from the computer and transfer the file by drag and drop using android file transfer. I'm guessing the problem must be around there because I have downloaded and transfered the file many times through my computer.
But either way, at least I know I can download it directly onto my phone and have it work. I'm loving the CM 10.1.0 RC2 now. Though I can't seem to change the cpu freq. they keeping going back to their default values.
omgwtfitsp said:
Hey thanks a lot for your concern, I actually managed to get it to work however, this time I used my phone directly to download the zip files. Before I would get the zip files from the computer and transfer the file by drag and drop using android file transfer. I'm guessing the problem must be around there because I have downloaded and transfered the file many times through my computer.
But either way, at least I know I can download it directly onto my phone and have it work. I'm loving the CM 10.1.0 RC2 now. Though I can't seem to change the cpu freq. they keeping going back to their default values.
Click to expand...
Click to collapse
congratulations man. have fun with it

Major Problem using TWRP

Hey guys, I am not new to this scene and have been running, flashing, roms since the S2. Today I ran into a major problem I cant seem to fix. I am running TWRP 2.5.0.2, always have for about 4 months with no issues. Today I did a complete Titanium Backup + recovery backup of my rom. After that I wiped for a fresh new rom install and noticed the rom I placed onto my internal storage is not there (it was def there in its own folder but through TWRP its not there). No biggie right? Just mount USB storage and put it somewhere else that TWRP can get to, but then USB wont mount on Windows now. No biggie right? Ill just restore the rom, put it in another directory, then wipe and reflash. However none of my backups are showing up when I hit restore, I had like 3 backups and everything is gone.
At this point what do I do? I tried everything to mount usb from recovery but windows wont take it (win 7). Any help would be appreciated, thanks.
doesntmatterx said:
Hey guys, I am not new to this scene and have been running, flashing, roms since the S2. Today I ran into a major problem I cant seem to fix. I am running TWRP 2.5.0.2, always have for about 4 months with no issues. Today I did a complete Titanium Backup + recovery backup of my rom. After that I wiped for a fresh new rom install and noticed the rom I placed onto my internal storage is not there (it was def there in its own folder but through TWRP its not there). No biggie right? Just mount USB storage and put it somewhere else that TWRP can get to, but then USB wont mount on Windows now. No biggie right? Ill just restore the rom, put it in another directory, then wipe and reflash. However none of my backups are showing up when I hit restore, I had like 3 backups and everything is gone.
At this point what do I do? I tried everything to mount usb from recovery but windows wont take it (win 7). Any help would be appreciated, thanks.
Click to expand...
Click to collapse
Nevermind guys I was able to get around it by putting the SD card from my S4 into the S2 and putting the rom files into another location. Once that was done placed it back into the S4, booted into recovery and flashed it. (phew!)
doesntmatterx said:
Nevermind guys I was able to get around it by putting the SD card from my S4 into the S2 and putting the rom files into another location. Once that was done placed it back into the S4, booted into recovery and flashed it. (phew!)
Click to expand...
Click to collapse
:good:
xBeerdroiDx said:
:good:
Click to expand...
Click to collapse
I take it back, stuck in a boot loop even after 2 fresh ODIN unroot tasks. Nothing I do gets me out of this, been a long day getting longer now
Can anyone help? Been at it for hours, I have tried everything, phone still reboots at the Samsung logo (the bluish one )
Unrooted 3 times
Launched stock recovery, wiped factory reset
wiped partition cache
removed battery
Cannot connect to Kies for Emergency restore.
Did you do an internal 'sd card'/media data wipe?
Best bet would be to Odin back to stock and start from scratch:
http://forum.xda-developers.com/showthread.php?t=2261573
Then from there just use casual to root and install TWRP in one easy step and you're back:
http://forum.xda-developers.com/showthread.php?t=2297900
seanpr123 said:
Did you do an internal 'sd card'/media data wipe?
Best bet would be to Odin back to stock and start from scratch:
http://forum.xda-developers.com/showthread.php?t=2261573
Then from there just use casual to root and install TWRP in one easy step and you're back:
http://forum.xda-developers.com/showthread.php?t=2297900
Click to expand...
Click to collapse
I know what I did, I was using Touchwiz and instead of doing a regular wipe I did a format and input "YES". I heard TW has major issues with this and thus screwed me up completely.
To add to my list above I tried this method and also did not work. http://androidfannetwork.com/2013/05/02/fix-your-soft-bricked-att-samsung-galaxy-s4/
Sean, I flashed from Odin like 3 times, how can I install TWRP if I cant get the phone to load up (boot loop)- Ill read up on casual. Thanks.
doesntmatterx said:
I know what I did, I was using Touchwiz and instead of doing a regular wipe I did a format and input "YES". I heard TW has major issues with this and thus screwed me up completely.
To add to my list above I tried this method and also did not work. http://androidfannetwork.com/2013/05/02/fix-your-soft-bricked-att-samsung-galaxy-s4/
Sean, I flashed from Odin like 3 times, how can I install TWRP if I cant get the phone to load up (boot loop)- Ill read up on casual. Thanks.
Click to expand...
Click to collapse
Did you do a factory reset in the stock recovery after Odin? That'll usually get you past the boot loop.
Should I ODIN with the RE-Partition Option?
Just Odined again and no dice. I booted into stock recovery and noticed after wiping factory I get "Can't open /efs/log/boot_cause" which pointed me to this fix someone on the Galaxy note forum said they did and it worked but I dont understand the steps, need some elaboration.
http://forum.xda-developers.com/showpost.php?p=39523753&postcount=4
jd1639 said:
Did you do a factory reset in the stock recovery after Odin? That'll usually get you past the boot loop.
Click to expand...
Click to collapse
Yep did that mulitple times, also did wipe cache partition in the same stock recovery. I get to the Samsung logo where the blue halo spins around the name, then it freezes there and reboots.
Hmm, never had to mess with EFS stuff on our phones before.
Did you make a backup ever in TWRP by chance?
Sorry if you tried the stock recovery options there's not much more I'm familiar with.
The good news is since you were able to Odin and get 3e back, you are technically warrantied again and could work with AT&T to get a new phone since your phone just stopped working out of the blue one day
seanpr123 said:
Hmm, never had to mess with EFS stuff on our phones before.
Did you make a backup ever in TWRP by chance?
Sorry if you tried the stock recovery options there's not much more I'm familiar with.
The good news is since you were able to Odin and get 3e back, you are technically warrantied again and could work with AT&T to get a new phone since your phone just stopped working out of the blue one day
Click to expand...
Click to collapse
LOL thanks, yes I may have to do that. I had a backup and it was wiped.
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
doesntmatterx said:
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
Click to expand...
Click to collapse
Try flashing using cwm. It'll probably work fine. Then you can go back to twrp. That's worked on other devices. Seems one you flash it once with cwm then twrp works from that point forward. Idk why
doesntmatterx said:
Anyone have any suggestions at all? I can't be the only one who has had this boot-loop / partition problem without a fix... or maybe I am lol.
Click to expand...
Click to collapse
Did your odin flashes include the pit files ? Have you tried flashing twrp or cwm with odin?
Sent from my SCH-I545 using xda app-developers app
jds3118 said:
Did your odin flashes include the pit files ? Have you tried flashing twrp or cwm with odin?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I tried flashing with a PIT file I found online but it fails through ODIN everytime. I tried on multiple versions of ODIN as well. I also cant seem to find readily available PIT files to test as well, (perhaps the one I used does not work). Also I did try to flash a CWM through ODIN but failed, but again there isnt anything that I have read that says "hey you can do this that way and it will work".
From what I understand I need to be rooted to install CWM or TWRP, and since I unrooted to try and fix the problem I cannot root myself through conventional methods. Everything I found online requires the phone to completely start up. (to the menu screen etc)
What stock firmware are you flashing with odin? I get firmware from sammobile.com. since you had a custom recovery I'm guessing you where on mdl firmware to start with.
jd1639 said:
What stock firmware are you flashing with odin? I get firmware from sammobile.com. since you had a custom recovery I'm guessing you where on mdl firmware to start with.
Click to expand...
Click to collapse
I never flashed a custom recovery through Odin < I can try that though, where can I get one? Im assuming this firmware will have root with CWM or TWRP?
Ive only flashed using official Samsung firmware from sammobile.com I tried both that are available for SGH-I337 with the PIT file as well and no dice.
doesntmatterx said:
I never flashed a custom recovery through Odin < I can try that though, where can I get one? Im assuming this firmware will have root with CWM or TWRP?
Ive only flashed using official Samsung firmware from sammobile.com I tried both that are available for SGH-I337 with the PIT file as well and no dice.
Click to expand...
Click to collapse
Do you know what firmware you were on? Was it mdl or mf3?

[Q] How to flash customs?

I`ve been trying to flash couple of thins on my phone with no success. I copy the .zip i want on sd card, turn off phone and start recovery booting mode and choose "apple update from external storage" and then select my zip. Phone goes into a process, reboots and nothing happens! Last thing i tried was CRT off effect, but again, no sucess. Is there any other way to flash these things?
shomy993 said:
I`ve been trying to flash couple of thins on my phone with no success. I copy the .zip i want on sd card, turn off phone and start recovery booting mode and choose "apple update from external storage" and then select my zip. Phone goes into a process, reboots and nothing happens! Last thing i tried was CRT off effect, but again, no sucess. Is there any other way to flash these things?
Click to expand...
Click to collapse
Have you installed a custom recovery like CWM or TWRP? without these installed you won't be able to flash.
radicalisto said:
Have you installed a custom recovery like CWM or TWRP? without these installed you won't be able to flash.
Click to expand...
Click to collapse
Yup, installed TWRP Manager...
radicalisto said:
Have you installed a custom recovery like CWM or TWRP? without these installed you won't be able to flash.
Click to expand...
Click to collapse
Am I missing any steps I Should make in TWRP?
shomy993 said:
Yup, installed TWRP Manager...
Click to expand...
Click to collapse
The mod you have installed isn't compatible with your ROM/Model? - try something else and see if it works
or
No errors at all when you apply the update? - You could try updating TWRP or reflashing it again, could just be a small error on the install.
radicalisto said:
The mod you have installed isn't compatible with your ROM/Model? - try something else and see if it works
or
No errors at all when you apply the update? - You could try updating TWRP or reflashing it again, could just be a small error on the install.
Click to expand...
Click to collapse
I have it fully rooted, but no custom mod...
Which mod are you trying to flash on to the device with TWRP via .zip file then? - you said CRT effect previously?
Depending on what you require, you could try Xposed framework and Wanam Xposed, they have a few mods between them
radicalisto said:
Which mod are you trying to flash on to the device with TWRP via .zip file then? - you said CRT effect previously?
Depending on what you require, you could try Xposed framework and Wanam Xposed, they have a few mods between them
Click to expand...
Click to collapse
Im trying to instal CRT effect when screen turns off and some boot animations from team venum... Idk, I might just give up, since nothing i tried by book works xD
It's possible that it just doesn't work on your device, have a peak through the thread about it, and check to be 100% sure, If not ask the Dev and see

GT-I9505 Constantly restarting

Hi all
Got an I9505 on O2 and since lollipop update it restarted a few times by itself. Now it keeps going into a loop where it will restart and the home screen loads, you can use it for about 20-30 seconds and it will reboot again!
Initially when I researched I though it was an app problem but couldn't find the culprit. Then I took it into the Samsung repair centre and they said it needed a clean flash by them. This didn't work and they fitted a new mother board and this still hasn't worked.
I can say that it has twice happened when the Wifi hasn't been working properly so I have turned it off but other than that I have no idea!
Also I have tried rebooting into safe mode but it still does it, aaarrrggghhhh!!!
Any ideas where I can go from here please?
P
Return to kitkat if you can. Otherwise use a custom rom. These would be my suggestions. Since Samsung's repair couldn't fix it, warranty should not be a problem anymore.
Thanks, I am more than willing to try a Custom ROM. Any recommendations? And how easy is it as never done before!
PJBXDA said:
Thanks, I am more than willing to try a Custom ROM. Any recommendations? And how easy is it as never done before!
Click to expand...
Click to collapse
It's fairly easy. Depending on what S4 model you have. Some models have a locked bootloader and that makes the whole thing trickier.
This is what I did:
1) Root with CF-Auto-Root. Thread here.
2) Backup all my apps.
3) Install a custom recovery (TWRP). Download and instructions here.
4) Flash custom rom. Most roms have their own instructions.
You can skip 1 and 2 if you don't want to backup.
Installing a custom recovery can be done using Odin. I recommend TWRP since it's the only one I've used.
Lollipop GPE rom. I've used this rom and didn't have any issues. CM12 seems a bit faster, but the GPE was more stable and bug-free.
Thanks I tried to install the CM12 before you posted using the instructions there but it failed, I assume that it needs to be rooted.
PJBXDA said:
Thanks I tried to install the CM12 before you posted using the instructions there but it failed, I assume that it needs to be rooted.
Click to expand...
Click to collapse
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Go to Install (if on TWRP), go to the location where you saved the downloaded rom zip and select it. The swipe the slider to begin flashing. Afterwards flash the gapps zip. Reboot.
Also, don't use the recovery posted in the CM12 thread. It was specially made by the dev and will convert your file system to f2fs. What it basically means is that it will wipe your internal storage completely.
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Thanks, doing that now
Click to expand...
Click to collapse
PJBXDA said:
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Thanks, doing that now
Click to expand...
Click to collapse
On the CF-Root page it says to open Odin and click on the PDA button but I cannot find a PDA button!
Edit: It is the AP button on the newer version!
Click to expand...
Click to collapse
GDReaper said:
You need a custom recovery to install any rom. It doesn't matter if it's rooted or not.
Get a custom recovery. Get all the necessary zip files (rom, gapps, etc). Place all the zip files on the external sd card. Boot into the custom recovery. Wipe /data, /cache and /dalvik-cache.
Go to Install (if on TWRP), go to the location where you saved the downloaded rom zip and select it. The swipe the slider to begin flashing. Afterwards flash the gapps zip. Reboot.
Also, don't use the recovery posted in the CM12 thread. It was specially made by the dev and will convert your file system to f2fs. What it basically means is that it will wipe your internal storage completely.
Click to expand...
Click to collapse
When you say go to install, do you mean install update... in the recovery menu? I do not have an install from zip option
PJBXDA said:
When you say go to install, do you mean install update... in the recovery menu? I do not have an install from zip option
Click to expand...
Click to collapse
You don't have a custom recovery installed. That is probably the stock recovery. You can't flash a rom using the stock recovery.
You absolutely need a custom recovery if you want to flash a custom rom.
Custom recoveries are: TWRP (Team Win Recovery Project), CWM (ClockworkMod Recovery) and PhilZ Touch Recovery. Either one should work. But you necessarily need one.
GDReaper said:
You don't have a custom recovery installed. That is probably the stock recovery. You can't flash a rom using the stock recovery.
You absolutely need a custom recovery if you want to flash a custom rom.
Custom recoveries are: TWRP (Team Win Recovery Project), CWM (ClockworkMod Recovery) and PhilZ Touch Recovery. Either one should work. But you necessarily need one.
Click to expand...
Click to collapse
Thanks I have installed TWRP, then it asked me to install Busybox which I did. Tried to Install from Zip and it went back to the original recovery and now when I am trying to restart the phone I just get messages telling me things have stopped working (Google play, settings etc etc) and a black screen!
Currently factory resetting and will try again
PJBXDA said:
Thanks I have installed TWRP, then it asked me to install Busybox which I did. Tried to Install from Zip and it went back to the original recovery and now when I am trying to restart the phone I just get messages telling me things have stopped working (Google play, settings etc etc) and a black screen!
Currently factory resetting and will try again
Click to expand...
Click to collapse
Follow the link I gave you. They have several instrunctions on how to install TWRP. You can install TWRP with Odin too.
Here, There are 3 ways to install. Use Odin. It doesn't require root and should be the easier one. Just UNTICK auto-reboot in Odin before flashing. Once it's done, turn the phone off and use the key combo to get into TWRP recovery.
GDReaper said:
Follow the link I gave you. They have several instrunctions on how to install TWRP. You can install TWRP with Odin too.
Here, There are 3 ways to install. Use Odin. It doesn't require root and should be the easier one. Just UNTICK auto-reboot in Odin before flashing. Once it's done, turn the phone off and use the key combo to get into TWRP recovery.
Click to expand...
Click to collapse
I think I am in, got through to the TWRP recovery and flashed the files but now I have a blue face with a pulsing white light behind it and have had for about 10 minutes. Any idea what is happening please?
PJBXDA said:
I think I am in, got through to the TWRP recovery and flashed the files but now I have a blue face with a pulsing white light behind it and have had for about 10 minutes. Any idea what is happening please?
Click to expand...
Click to collapse
I guess that's the CM12 logo. First boot after flashing always takes some time because the rom is configuring stuff.
If you still don't get into android, turn off the device and turn it on again. If you've done everything correctly there is no reason why it shouldn't boot.
GDReaper said:
I guess that's the CM12 logo. First boot after flashing always takes some time because the rom is configuring stuff.
If you still don't get into android, turn off the device and turn it on again. If you've done everything correctly there is no reason why it shouldn't boot.
Click to expand...
Click to collapse
It is their logo but it seems to be taking forever, any idea how long a first boot should take?
PJBXDA said:
It is their logo but it seems to be taking forever, any idea how long a first boot should take?
Click to expand...
Click to collapse
It shouldn't take that long. For me it always took under 5 minutes. Tell me exactly what you did.
GDReaper said:
It shouldn't take that long. For me it always took under 5 minutes. Tell me exactly what you did.
Click to expand...
Click to collapse
Did as you said, in the end I tried flashing the other GPE ROM and that has worked but I do not really like it. Trying the Cynogen again by downloading direct to the SD card and not copying it over. I want to say a very big thank you GDReaper for all your help, it is and has been very much appreciated.
PJBXDA said:
Did as you said, in the end I tried flashing the other GPE ROM and that has worked but I do not really like it. Trying the Cynogen again by downloading direct to the SD card and not copying it over. I want to say a very big thank you GDReaper for all your help, it is and has been very much appreciated.
Click to expand...
Click to collapse
No problem. You could try a different build. Or you could try a CM12 based rom. SaberMod worked fine for me. And it's the closest to the actual CM12 you can get.
GDReaper said:
No problem. You could try a different build. Or you could try a CM12 based rom. SaberMod worked fine for me. And it's the closest to the actual CM12 you can get.
Click to expand...
Click to collapse
Cheers, I have CM12 up and running now. Downloaded the files straight to the SD card and they worked. Seems OK but might try others, how do I go about trying SaberMod, do I need to flash that? Sorry to keep asking what are no doubt pretty obvious questions but I'm pretty new to this!
Want to get rid of the google search box for starters!
PJBXDA said:
Cheers, I have CM12 up and running now. Downloaded the files straight to the SD card and they worked. Seems OK but might try others, how do I go about trying SaberMod, do I need to flash that? Sorry to keep asking what are no doubt pretty obvious questions but I'm pretty new to this!
Want to get rid of the google search box for starters!
Click to expand...
Click to collapse
SaberMod is a rom. SaberMod CM12.1.
They are very similar. The difference is how they tackle optimizations.
Yes, you will have to flash it. But you can also stick with normal CM12 if you don't have any issues.
The google search box from the home screen or the recents?
You can change the launcher to get rid of it from the home screen.
To remove it from the recents there is an option somewhere in the settings.

Categories

Resources