Related
I have been attempting to get WP7 working on my hd2, but have given up as I just can't get the thing to activate. So I have been trying to put android back on, but nothing I try installing now comes out bootable. I've even tried putting it back to an official rom before installing (or trying to) android. whereas that rom works, the android install still fails to boot.
Anyone got any suggestions?
which rom are you trying to install? cwm or daf install?
cwm install, imilka's vision sense.
Hi,
I have HD2 with 3.03.0000 SPL, 2.15.50.14 radio, ROM 3.14.479.2 (04666) WWE.
I tried to boot SuperRAM_FroYo_V1.5.
Everything is ok, but when green HTC logo appears, phone is restarting to Windows... Can someone tell me what I need to do to boot Android ? I tried to search, but I dont find answer.
Thanks.
Looking into it farther, it's looking like when i try to install from clockworkmod recovery (3.0.0.5) that I have booting off my sd-card, the install goes far too wuick. it doesn't even create partitions or anything. Could it be the wp7 rom caused some areas of the phone to be 'locked' or something similar?
borda01 said:
Hi,
I have HD2 with 3.03.0000 SPL, 2.15.50.14 radio, ROM 3.14.479.2 (04666) WWE.
I tried to boot SuperRAM_FroYo_V1.5.
Everything is ok, but when green HTC logo appears, phone is restarting to Windows... Can someone tell me what I need to do to boot Android ? I tried to search, but I dont find answer.
Thanks.
Click to expand...
Click to collapse
Same is happening with 1.42.000 & 2.15.14 radio.
SpiritWolf said:
Looking into it farther, it's looking like when i try to install from clockworkmod recovery (3.0.0.5) that I have booting off my sd-card, the install goes far too wuick. it doesn't even create partitions or anything. Could it be the wp7 rom caused some areas of the phone to be 'locked' or something similar?
Click to expand...
Click to collapse
You have reformatted your SD Card to original size after using WP7, have you? If not, download Panaspnic SD Formatter and format your SD card using that.
Are you guys making sure you have right CWR system layout size for the ROM you're trying to flash? That's usually the problem if it won't get past the first Android bootscreen.
Task 29
Flash radio
Reformat sdcard
Flash magdlr1.13
Flash cwm recovery with correct partition size.150, 200mb etc.
Flash rom
Tbe task 29 and sdcard reformat should revers any possibilities of something still hanging around from wp7
2.15 radio
2.2miui stock via cwm
chrisgto4 said:
Task 29
Flash radio
Reformat sdcard
Flash magdlr1.13
Flash cwm recovery with correct partition size.150, 200mb etc.
Flash rom
Tbe task 29 and sdcard reformat should revers any possibilities of something still hanging around from wp7
Click to expand...
Click to collapse
Only use this if just flashing the correct CWR partition won't work. There's also no need to reflash the radio. Task 29 only formats the NAND area.
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Depends on which task 29 he finds in his search. Also if this is somehow radio related (seriously doubt) why not reflash it anyways, not gonna hurt. Since we dont know exactly whats wrong why not just redo eveything. Only takes about 5 minutes. And pretty much guaranteed to boot
2.15 radio
2.2miui stock via cwm
SpiritWolf said:
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Click to expand...
Click to collapse
Full set of partitions? Meaning you've got a FAT32 first partition and a Ext3/4 second partition? What CWR do you have installed though? It might be the wrong size for the ROM you're trying to flash. You can check what size CWR partition you have by opening the flash.cfg file (inside of your CWR folder) and find the line with 'system ya | 300' etc.
SpiritWolf said:
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Click to expand...
Click to collapse
Oh. Guessing u have a leo512 and partitioning sdcard for apps2 sd. Wp7 still got ahold of your sdcard and did something.
2.15 radio
2.2miui stock via cwm
Yeah. I have the partitions set up as follows
1. Fat32 13gigs (ish)
2. Ext4 1gig
3. Ext4 350mb
3. linux swap 150gig.
the version of my clockworkmod recovery thing is v.3.0.0.5 and is running off my sd card, not actually installed on the phone. This has all worked for me fine until i put wp7 on, now nothing seems to be working. sigh.
Running off your SD card as in the intrid and zImage file are in there? I suggest you just update your CWR to the newest version (1.3). It doesn't need those files to be copied to the SD Card and runs off NAND. In MAGLDR it has it's own menu too. (AD Recovery). For me, I just have a load of different recovery folders with different partition sizes but it's not needed. I suggest you download the 150M CWR and then just change the partition size to whatever is needed. You just change the System ya | -150- to whatever size is needed. It'll probably be in the first post of the ROM you're downloading.
SpiritWolf said:
Yeah. I have the partitions set up as follows
1. Fat32 13gigs (ish)
2. Ext4 1gig
3. Ext4 350mb
3. linux swap 150gig.
the version of my clockworkmod recovery thing is v.3.0.0.5 and is running off my sd card, not actually installed on the phone. This has all worked for me fine until i put wp7 on, now nothing seems to be working. sigh.
Click to expand...
Click to collapse
You need to format your whole sdcard. Whatever your using to format isnt seeing everything. Some partition types are only seen by linux. What partition tool are you using?
2.15 radio
2.2miui stock via cwm
I used gparted to give it it's fresh lot of partitions
Have you tried what I said to do?
Ok, got recovery flashed in and running out of magldr. When it comes to partitioning the sd card, what is the advantage of 4 partitions over 3, as some rom threads say to partition 4, some say 3.
You mean an Ext3/4 partition? I honestly don't know and I just use an Ext3 partition as it's easier to do on XP. Both work though fine though.
Have you flashed your ROM yet?
could somebody explain me the difference between american android MAGDLR NAND and american android CLK NAND?
What are advantages and disadvantages of them ?
Samuelgentl said:
could somebody explain me the difference between american android MAGDLR NAND and american android CLK NAND?
What are advantages and disadvantages of them ?
Click to expand...
Click to collapse
CLK and MAGLDR are the two different bootloaders used to get android on to the hd2's nand. american clk nand is the rom for the clk bootloader while amercian magldr nand is the rom for magldr bootloader.
If you dont know what clk and magldr are or what nand is then you google it. or search here in the forum before posting, everything has been explained, usually more than once, then over and over again, by various different people with various different guides.
evilbarcode said:
CLK and MAGLDR are the two different bootloaders used to get android on to the hd2's nand. american clk nand is the rom for the clk bootloader while amercian magldr nand is the rom for magldr bootloader.
If you dont know what clk and magldr are or what nand is then you google it. or search here in the forum before posting, everything has been explained, usually more than once, then over and over again, by various different people with various different guides.
Click to expand...
Click to collapse
could you give me some links please where was my question answered ? I was searching by google but I have not get satisfactory answers.
Samuelgentl said:
could you give me some links please where was my question answered ? I was searching by google but I have not get satisfactory answers.
Click to expand...
Click to collapse
Read this first!!
Then this!!
Then This!!!!
Read all before you do anything, well that's my opinion.
evilbarcode said:
Read this first!!
Then this!!
Then This!!!!
Read all before you do anything, well that's my opinion.
Click to expand...
Click to collapse
Thanks
I think Ill keep MAGDLR ... I just need to solve two problems:
1. how to create partition on my SD cart to extend internal memory (because in my american android I have only 80 MB free). I know how to do it in CLK but I have no idea how to do it in MAGDLR
2. somehow make my opera mobile browser play flash videos properly.
Samuelgentl said:
Thanks
I think Ill keep MAGDLR ... I just need to solve two problems:
1. how to create partition on my SD cart to extend internal memory (because in my american android I have only 80 MB free). I know how to do it in CLK but I have no idea how to do it in MAGDLR
2. somehow make my opera mobile browser play flash videos properly.
Click to expand...
Click to collapse
For problem one, download the free tool Mini Tool Partition Wizard. Use the Home Edition.
Steps to partition sdcard:
1. If possible turn off device, take out sdcard, use a sdcard reader to connect micro sdcard to pc/laptop.
2. Backup all sdcard content to pc/laptop.
3. Open partition wizard, delete partition on sdcard
4. Now, first create a fat32 partition, with 32kb cluster, make it primary, leave atleast 500mb free space. THIS HAS TO BE DONE BEFORE THE NEXT PARTITION.
5. Then using the remaining space, create a second partition, also primary, forrmat ext3 or ext4 depending on your rom, with 4kb cluster. THIS HAS TO BE THE SECOND PARTITION.
Apply all changes then put sdcard back into device, turn it on, run data2sd script or a2sd+ script depending on rom then you should be good to go.
I would recommend searching the american android thread for data2sd or a2sd+ scripts and instructions before following my advice.
Disclaimer: I take no responsibility for device breakages or sdcard loss of life, it is not my fault, blame god, technically he created everything so its his fault.
evilbarcode said:
For problem one, download the free tool Mini Tool Partition Wizard. Use the Home Edition.
Steps to partition sdcard:
1. If possible turn off device, take out sdcard, use a sdcard reader to connect micro sdcard to pc/laptop.
2. Backup all sdcard content to pc/laptop.
3. Open partition wizard, delete partition on sdcard
4. Now, first create a fat32 partition, with 32kb cluster, make it primary, leave atleast 500mb free space. THIS HAS TO BE DONE BEFORE THE NEXT PARTITION.
5. Then using the remaining space, create a second partition, also primary, forrmat ext3 or ext4 depending on your rom, with 4kb cluster. THIS HAS TO BE THE SECOND PARTITION.
Apply all changes then put sdcard back into device, turn it on, run data2sd script or a2sd+ script depending on rom then you should be good to go.
I would recommend searching the american android thread for data2sd or a2sd+ scripts and instructions before following my advice.
Disclaimer: I take no responsibility for device breakages or sdcard loss of life, it is not my fault, blame god, technically he created everything so its his fault.
Click to expand...
Click to collapse
Im very thankful for your advice but there is problem. I dont have sd card reader on my desktop
Samuelgentl said:
Im very thankful for your advice but there is problem. I dont have sd card reader on my desktop
Click to expand...
Click to collapse
And you don't have a usb card reader? in that case boot into clockworkmod recovery, i'm guessing you know that? go down to mounts and storage, the go to mass storage, the bottom one, plug usb cable in and that will mount sdcard to pc.
Then follow my instructions from before.
When you say!" I know how to do it in clk but not magldr",,, are you sure you don't mean you know how to do it in cwm? Cwm and clk are not the same. Cwm on clk is the same as cwm on magldr.
Clk is not cwm.
Into magldr, start cwm, advanced, partition SD card, done.
samsamuel said:
When you say!" I know how to do it in clk but not magldr",,, are you sure you don't mean you know how to do it in cwm? Cwm and clk are not the same. Cwm on clk is the same as cwm on magldr.
Clk is not cwm.
Into magldr, start cwm, advanced, partition SD card, done.
Click to expand...
Click to collapse
That works tooo but if your rom needs a ext4 partition then you cant use that as cwm partitions using ext3. but if thats all yo need then fine that works jut make sure you dont use a swap space unless your rom requires it.
And i was meaning did you know ho to get into cwm on magldr and obviously you did so thats good. And yes i know cwm is not clk cwm is a recovery, clk is a bootloader, i was the one that pointed you to that info on clk and magldr
evilbarcode said:
That works tooo but if your rom needs a ext4 partition then you cant use that as cwm partitions using ext3. but if thats all yo need then fine that works jut make sure you dont use a swap space unless your rom requires it.
And i was meaning did you know ho to get into cwm on magldr and obviously you did so thats good. And yes i know cwm is not clk cwm is a recovery, clk is a bootloader, i was the one that pointed you to that info on clk and magldr
Click to expand...
Click to collapse
to be honest Im completely confused now .. I thought that CLK ane CWM are the same things.
when I was downloading american android NAND 2.3.7 there were 3 download links:
1. AmeriCanAndroid MAGLDR NAND
2. AmeriCanAndroid *CLK NAND - this link is dead
3. CLK starterkit - this link is dead
I thought that AmeriCanAndroid MAGLDR NAND is one whitch is installed trough MAGLDR and AmeriCanAndroid *CLK NAND is one witch is installed trough clock work mode
evilbarcode said:
And you don't have a usb card reader? in that case boot into clockworkmod recovery, i'm guessing you know that? go down to mounts and storage, the go to mass storage, the bottom one, plug usb cable in and that will mount sdcard to pc.
Then follow my instructions from before.
Click to expand...
Click to collapse
I very appreciate your help. Im beginner in installing android and to be honest Im totaly lost.
so if I understand it right I have to do this ? :
0. install wm 6,5 to erase everything (I want to start from very beginning)
1. install Magldr
2. install clock work mode CWM
3. make a partition like this:
-Boot into the Clockwork Mod menu
-Go down to 'Advanced' and select (by pressing 'Call Button')
-Select 'Partition SD Card'
-Select Size of required partition not sure then 1024M is a good size)
-Make ABSOLUTELY sure you want to continue and then select 0M Swap Size
4. go back to magldr and install again wm 6,5 to erase everything except the created partition
5. install magldr again
6. install american android magldr NAND
Do I understand it right ?
Hey man there are plenty of guides and tutorials on this topic, that is if you search !!
Try this one: http://forum.xda-developers.com/showthread.php?t=893948
Samuelgentl said:
to be honest Im completely confused now .. I thought that CLK ane CWM are the same things.
when I was downloading american android NAND 2.3.7 there were 3 download links:
1. AmeriCanAndroid MAGLDR NAND
2. AmeriCanAndroid *CLK NAND - this link is dead
3. CLK starterkit - this link is dead
I thought that AmeriCanAndroid MAGLDR NAND is one whitch is installed trough MAGLDR and AmeriCanAndroid *CLK NAND is one witch is installed trough clock work mode
Click to expand...
Click to collapse
No CLK and MAGLDR are two different bootloaders. Obviously the links are just dead for american android CLK nand.
American android MAGLDR is installed through clockworkmod recovery using the MAGLDR bootloader.
AND
American Android CLK is installed through clockworkmod recovery using the CLK bootloader.
CWM works on both bootloaders, that is why you are getting confused.
There are plenty guides to use to make sure you can do it with out problems, you just need to search. Dont do anything until you know what you are doing, just read and re-read until you understand what has to be done and what the different aspects of the HD2 android are.
I don't want to be mean by saying this but if you can't understand what is happening you shouldn't try and put android on your HD2
hi
i have an htc hd2 sfp and i flashed android from this post http://forum.xda-developers.com/showthread.php?t=1268580
flashed hspl 2.08.hspl
rom 2.15.50.14europ
magldr1.13
formated sd
kernel marc 1.08
every think is ok installed from zip in cwm
but when i finish installing kernel and reboot my steel on face picture is this normal or i should see lines for installing in my screen ???
excuse my english and if i am wrong pleas help me and explain me how can i install and run android from nand and what's the best rom for android on htc hd2 (stable and no freez)
thanks a lot for replay
Did you flash the correct partition size (170MB)? Do you have an EXT Partition on your SD card? The translation isn't the best so I'm going to assume that you installed the kernel successfully but are stuck in a bootloop of some sort.
Nigeldg said:
Did you flash the correct partition size (170MB)? Do you have an EXT Partition on your SD card? The translation isn't the best so I'm going to assume that you installed the kernel successfully but are stuck in a bootloop of some sort.
Click to expand...
Click to collapse
first thanks for replying
i have formated my sd car first partition 7go fat32 primary and 1go ext4 primary
but flash the correct partition i don't know what is 170mb partition
Use the HD2 Toolkit, it explains makes things simple. Read the guides in my signatures too, they should also clear a few things up.
Hi
I recently installed a Sense 3.x ROM from the Sensation XL Android 2.3.5 and I got only 9MB of free space. I have an initrd-patcher for ICS and JB, but I doubt that it will work on older versions of android.
Is there a way to make android 2.3.5 use the EXT4 partition on the SD-card?
Yes, you have to flash an a2sd or DataOnExt script after first boot/flashing the rom immediately. Of course, while having an ext partition created beforehand.
Marvlesz said:
Yes, you have to flash an a2sd or DataOnExt script after first boot/flashing the rom immediately. Of course, while having an ext partition created beforehand.
Click to expand...
Click to collapse
Thanks for the reply. Can you recommend a good script for doing this?
I'd suggest this one, but there's a whole lot of other ones. So if this one doesn't work well or you don't like it, don't come here asking for another one. Instead, go out there and look for the one that you like.
Marvlesz said:
I'd suggest this one, but there's a whole lot of other ones. So if this one doesn't work well or you don't like it, don't come here asking for another one. Instead, go out there and look for the one that you like.
Click to expand...
Click to collapse
and just a little clue to help out a little bit
its in the second post of the thread that Marvlesz link to
I used initrd_patcher_v2 on Gingerbread 2.3.7 and it's worked fine. So it should work on GB 2.3.5 as well. Remember to make an EXT4 partition on your SD before any installation, via recovery, and remove any script like a2sd from zip ROM.
eclyptos said:
I used initrd_patcher_v2 on Gingerbread 2.3.7 and it's worked fine. So it should work on GB 2.3.5 as well. Remember to make an EXT4 partition on your SD before any installation, via recovery, and remove any script like a2sd from zip ROM.
Click to expand...
Click to collapse
I tried to search for initrd_patcher_v2 and found this one: http://forum.xda-developers.com/showthread.php?p=36049396
I tried running it on my system, but freezes up just before boot-animation.
I use the SENSATION XL ROM V 3.0 STOCK from here: http://forum.xda-developers.com/showthread.php?t=1316632&highlight=sensation+all+in+one
I can't seem to find any a2sd-scripts in the ROM zip, but there's a sd-ext folder inside the ZIP.
CTSRP said:
I tried to search for initrd_patcher_v2 and found this one: http://forum.xda-developers.com/showthread.php?p=36049396
I tried running it on my system, but freezes up just before boot-animation.
I use the SENSATION XL ROM V 3.0 STOCK from here: http://forum.xda-developers.com/showthread.php?t=1316632&highlight=sensation+all+in+one
I can't seem to find any a2sd-scripts in the ROM zip, but there's a sd-ext folder inside the ZIP.
Click to expand...
Click to collapse
Can you do a fresh installation again of this ROM or you try to keep all you data which you using right now?
Sv: Enabling storage of EXT4 on SD-card
I tried from a fresh install, before booting the first time, and also from an aleady configured installation.
CTSRP said:
I tried from a fresh install, before booting the first time, and also from an aleady configured installation.
Click to expand...
Click to collapse
You don't understand, I mean can you format you phone and install this rom again with my advices?
Did you made an EXT4 partition of 1GB or more, with Mini Tool (free), on your sd BEFORE fresh installation of this ROM?
I checked your ROM and the script (apps2sd) is already in that ROM so you probably make a wrong Installation.
Sv: Enabling storage of EXT4 on SD-card
I do understand what you say. I made a task29, clk repartition and recovery from hd2toolkit. Under installation the installer asks if I have 1024mb us model or 512mb EU version. I selected the EU version, as this is the one I have. The only question it asks me is if I have magldr or clk.
After that it returns to clk recovery and I press reboot now. I have created the ext4 partition before I even tried installing android the very first time.
If you want, I can perform a new installation with a video recording to document the process
CTSRP said:
I do understand what you say. I made a task29, clk repartition and recovery from hd2toolkit. Under installation the installer asks if I have 1024mb us model or 512mb EU version. I selected the EU version, as this is the one I have. The only question it asks me is if I have magldr or clk.
After that it returns to clk recovery and I press reboot now. I have created the ext4 partition before I even tried installing android the very first time.
If you want, I can perform a new installation with a video recording to document the process
Click to expand...
Click to collapse
Do not use CLK or HD2toolkit this time.
I will recommend to do in this way, before touch your phone format your SD with GUIFORMAT (look here on XDA for it) in FAT32 normal mode (no quick), after format the SD use Mini Tool and make a ext4 partition of 2gb (2048mb) at the end of the SD, so when you look at the partition the ext partition have to be at the right side of you. Put inside the SD the zip of Sensation XL 3.0 only, do not do anything else with your sd.
Format your Phone with Task29, reboot in Bootloader,
Flash MAGLDR 1.13 for HD2,
From MAGLDR 1.13 via USB Flasher flash the Recovery Touch Beta 8, (I provided you the Recovery ready for you, unzip and flash)
Reboot in MAGLDR,
put the SD into the Phone,
run Recovery,
Do a wipe data and wipe cache partition and wipe dalvick cache,
Install from sd the zip via recovery,
In Aroma do not select any option if you don't know anything about it, the installation will recognize the EXT4 partition automatically and you ready to GO, GO, GO.
Let me know.
Hi,
I am currently using Rom from tyween: http://forum.xda-developers.com/showthread.php?t=933951 and I would like to install a new one from Tytung http://forum.xda-developers.com/showthread.php?t=2224469 .
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
peter.l said:
Hi,
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
Click to expand...
Click to collapse
Nand is divided into two: 1- Pure Nand (EVERYTHING is on the NAND of the device) and 2- Nand with DataOnExt (as the name implies, some of the data will be stored on an EXT partition on your SD card).
Since the international version of the HD2 only has about half a gig of storage, if you fit everything into the NAND you won't have enough space left for you to install apps and whatnot. If you want it on NAND, you need to choose the second option (some data on the sdcard), but you need to make sure you have an EXT partition on your sd card first (if you don't know how to make one, search).
And "aurora" (you mean aroma*) is just a path, it IS like you said THE installer. It's got nothing to do with your installation. It is just a fancy make-up for the old installation method. Yes, you'll have to use it.
peter.l said:
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
Click to expand...
Click to collapse
No, that patch is for something else. Your problem is different.
If you mean:
1- NAND Only, then you may have not made enough partition space for the system. (Either way, you shouldn't use this one, use NAND WITH dataonext).
but if you mean 1- NAND with DataOnExt, then it is either your partition size is too small or you do not have a proper sdcard ext partition.
peter.l said:
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
Click to expand...
Click to collapse
It's the same thing. When you select "Install ROM" in ROM Manager, it will actually reboot your device into CWM and you will have to follow the steps of Aroma as well. Yes, you can use it if you have cLK bootloader and not magldr.
You are welcome
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
peter.l said:
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
Click to expand...
Click to collapse
No, Aroma is *included* in the .zip file of the ROM. Just download the ROM, flash from recovery normally but instead of the usual text of procedure, you'll see a fancy screen where you get to configure the ROM before it is installed.
In my opinion, yes, 1GB is more than enough.
recover
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
exlord1 said:
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
Click to expand...
Click to collapse
CWM is independent from the ROM you install.
If you are talking about "boot into recovery" from within the ROM, that's a rom's feature and does not have to be included in it. You can reach the recovery by rebooting your phone into MAGLDR and then choosing the option AD. Recovery or something like that.
Just to add a little to Marvlesz's answer, reboot into recovery/bootloader on any ROM will just reboot the phone normally if you have MAGLDR. To access CWM just hold power for the MAGLDR menu then select 8. AD Recovery. If you use cLK on the other hand, reboot into recovery does work if I'm not mistaken.
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
It could literally be ANYTHING. Follow this guide:
http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
and I think you'll be good, please read everything there.
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Nigeldg said:
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Click to expand...
Click to collapse
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
peter.l said:
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
Click to expand...
Click to collapse
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Nigeldg said:
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Click to expand...
Click to collapse
I have 150 mb. So for this ROM should I use 250 or 400?
peter.l said:
I have 150 mb. So for this ROM should I use 250 or 400?
Click to expand...
Click to collapse
285. To create that, go to wherever your CWM thing is stored on your PC, open the CWM folder, open the file flash.cfg (not flash.cfg.txt.) in notepad (it should open in this way automatically) then change the value next to the line beginning 'SYSTEM...' from 150 to 285, keeping everything else exactly the same.