I have been attempting to get WP7 working on my hd2, but have given up as I just can't get the thing to activate. So I have been trying to put android back on, but nothing I try installing now comes out bootable. I've even tried putting it back to an official rom before installing (or trying to) android. whereas that rom works, the android install still fails to boot.
Anyone got any suggestions?
which rom are you trying to install? cwm or daf install?
cwm install, imilka's vision sense.
Hi,
I have HD2 with 3.03.0000 SPL, 2.15.50.14 radio, ROM 3.14.479.2 (04666) WWE.
I tried to boot SuperRAM_FroYo_V1.5.
Everything is ok, but when green HTC logo appears, phone is restarting to Windows... Can someone tell me what I need to do to boot Android ? I tried to search, but I dont find answer.
Thanks.
Looking into it farther, it's looking like when i try to install from clockworkmod recovery (3.0.0.5) that I have booting off my sd-card, the install goes far too wuick. it doesn't even create partitions or anything. Could it be the wp7 rom caused some areas of the phone to be 'locked' or something similar?
borda01 said:
Hi,
I have HD2 with 3.03.0000 SPL, 2.15.50.14 radio, ROM 3.14.479.2 (04666) WWE.
I tried to boot SuperRAM_FroYo_V1.5.
Everything is ok, but when green HTC logo appears, phone is restarting to Windows... Can someone tell me what I need to do to boot Android ? I tried to search, but I dont find answer.
Thanks.
Click to expand...
Click to collapse
Same is happening with 1.42.000 & 2.15.14 radio.
SpiritWolf said:
Looking into it farther, it's looking like when i try to install from clockworkmod recovery (3.0.0.5) that I have booting off my sd-card, the install goes far too wuick. it doesn't even create partitions or anything. Could it be the wp7 rom caused some areas of the phone to be 'locked' or something similar?
Click to expand...
Click to collapse
You have reformatted your SD Card to original size after using WP7, have you? If not, download Panaspnic SD Formatter and format your SD card using that.
Are you guys making sure you have right CWR system layout size for the ROM you're trying to flash? That's usually the problem if it won't get past the first Android bootscreen.
Task 29
Flash radio
Reformat sdcard
Flash magdlr1.13
Flash cwm recovery with correct partition size.150, 200mb etc.
Flash rom
Tbe task 29 and sdcard reformat should revers any possibilities of something still hanging around from wp7
2.15 radio
2.2miui stock via cwm
chrisgto4 said:
Task 29
Flash radio
Reformat sdcard
Flash magdlr1.13
Flash cwm recovery with correct partition size.150, 200mb etc.
Flash rom
Tbe task 29 and sdcard reformat should revers any possibilities of something still hanging around from wp7
Click to expand...
Click to collapse
Only use this if just flashing the correct CWR partition won't work. There's also no need to reflash the radio. Task 29 only formats the NAND area.
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Depends on which task 29 he finds in his search. Also if this is somehow radio related (seriously doubt) why not reflash it anyways, not gonna hurt. Since we dont know exactly whats wrong why not just redo eveything. Only takes about 5 minutes. And pretty much guaranteed to boot
2.15 radio
2.2miui stock via cwm
SpiritWolf said:
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Click to expand...
Click to collapse
Full set of partitions? Meaning you've got a FAT32 first partition and a Ext3/4 second partition? What CWR do you have installed though? It might be the wrong size for the ROM you're trying to flash. You can check what size CWR partition you have by opening the flash.cfg file (inside of your CWR folder) and find the line with 'system ya | 300' etc.
SpiritWolf said:
Yeah, I did a full set of partitions on my sd card. not sure it was needed as wp7 didn't recognise the card.
Click to expand...
Click to collapse
Oh. Guessing u have a leo512 and partitioning sdcard for apps2 sd. Wp7 still got ahold of your sdcard and did something.
2.15 radio
2.2miui stock via cwm
Yeah. I have the partitions set up as follows
1. Fat32 13gigs (ish)
2. Ext4 1gig
3. Ext4 350mb
3. linux swap 150gig.
the version of my clockworkmod recovery thing is v.3.0.0.5 and is running off my sd card, not actually installed on the phone. This has all worked for me fine until i put wp7 on, now nothing seems to be working. sigh.
Running off your SD card as in the intrid and zImage file are in there? I suggest you just update your CWR to the newest version (1.3). It doesn't need those files to be copied to the SD Card and runs off NAND. In MAGLDR it has it's own menu too. (AD Recovery). For me, I just have a load of different recovery folders with different partition sizes but it's not needed. I suggest you download the 150M CWR and then just change the partition size to whatever is needed. You just change the System ya | -150- to whatever size is needed. It'll probably be in the first post of the ROM you're downloading.
SpiritWolf said:
Yeah. I have the partitions set up as follows
1. Fat32 13gigs (ish)
2. Ext4 1gig
3. Ext4 350mb
3. linux swap 150gig.
the version of my clockworkmod recovery thing is v.3.0.0.5 and is running off my sd card, not actually installed on the phone. This has all worked for me fine until i put wp7 on, now nothing seems to be working. sigh.
Click to expand...
Click to collapse
You need to format your whole sdcard. Whatever your using to format isnt seeing everything. Some partition types are only seen by linux. What partition tool are you using?
2.15 radio
2.2miui stock via cwm
I used gparted to give it it's fresh lot of partitions
Have you tried what I said to do?
Ok, got recovery flashed in and running out of magldr. When it comes to partitioning the sd card, what is the advantage of 4 partitions over 3, as some rom threads say to partition 4, some say 3.
You mean an Ext3/4 partition? I honestly don't know and I just use an Ext3 partition as it's easier to do on XP. Both work though fine though.
Have you flashed your ROM yet?
Related
hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
magic phone said:
hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM
Click to expand...
Click to collapse
Well you clearly haven't read enough! All of these threads show that flashing a .50 radio unlocks the 576 MB RAM. For f**k's sake, stop posting stupid questions in the Q&A when there have been a tonne of them, just use the search and read properly. It isn't hard.
EDIT: Lol, just saw that samsamuel got in a minute before me. Oh how ironic my post now is :')
samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
The great thing about the internet is that if you know how to use it .... you can get lots of other opinions viewpoints and lots of stufffffffffffffff that you didn't know before....
and then who knows...............
edit.......I don't feel like a senior member.....
samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
@samsamuel
1- thanks for your replay
2-i know about search ,and MR google say there is 2 methode one with SD cartd and the second without SD card
3-im traying the solution without sd card ......the hardspl is OK.....i have the radio2.15.50 but....affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?
magic phone said:
affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?
Click to expand...
Click to collapse
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.
yo, i wrote this once to another guy per pn. think its still up to date. could be possible that i messed up some facts hehe
redplate said:
MTN_HD2 said:
i wanna the ics too :| but the f'ing wifi doesnt work ... how did you install it ? (every step)
thanks in advance
me : task29>magldr>190/2 190/5 200/10 cwm(tried all) >the rom
Click to expand...
Click to collapse
Hi. thats not that difficult.
Best thing is you read HERE CAREFULLY
But i am trying to explain it easy for you:
First you need to be sure you have the following "things" installed correctly:
1.) Prepare your Mobile
HSPL 2.08 (to be able to flash MAGLRD)
http://forum.xda-developers.com/showpost.php?p=5279234&postcount=1
Radio 2.50.15.14 (which supports 576MB RAM)
http://forum.xda-developers.com/showthread.php?t=611787
MAGLDR 1.13 Bootloader (to be able to install Clockwork Mod)
http://forum.xda-developers.com/showthread.php?t=893618
Recovery (Clockwork Mod; i prefer the Touch version)
http://forum.xda-developers.com/showthread.php?t=1419733
For ICS you need at least 200MB system partition (Recovery Layout; the space from your NAND (intern memory) for your ROM file). Means you have to edit the flash.cfg coming with MAGLDR before flashing the CWM; do this with Notepad++:
I am using following config (flash.cfg):
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 220M
cache ya 5M
userdata ya|asize|hr allsize
Now you are prepared for installing a ROM. In your case ICS.
2.) Flash ROM
Download the .zip file for your ROM. There are two versions. CLK (just another Bootloader) and MAGLDR. We are using MAGLDR. So download it here:
[15.Jan.2012] NexusHD2-ICS-4.0.3-CM9 V1.1
http://forum.xda-developers.com/showthread.php?t=1434860
Now you just need to copy the ROM .zip on your SD-Card. Then load into Bootloader (MAGLDR) and choose point 8. for your Recovery (CWM).
Now, if you had another rom installed, you need to wipe all cache and data including the Dalvik Cache (under Advanced).
Then install your .zip file with "install zip from sd" and wait. Done. Restart your mobile
3.) Install DATA2SD
IF you want to use DATA2SD (means to store apps and system relevant data on your sd-card) you have to create an EXT-Partition on your SD-CARD.
Just do this with CWM, there is an option for it (should be something like "Partition your SD-Card"). I am using 1GB partition with 0MB swap.
Once you have done this navigate to this thread and do EXACTLY what that guy wrote in post #207. But instead of using the file from post #207 use the flashable file from post #174 (40ad2sdx-a2Recovery.zip).
If you did it correctly you are done
And again, for additional info read THIS COMPLETLY.
Have fun
Click to expand...
Click to collapse
samsamuel said:
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.
Click to expand...
Click to collapse
@samsamuel
thanks again my friend ok i do all the step
i have the 2.08hspl....and i have also the task29 affter that the MAGLDR113 work fine......
now i chose the USB flasher mode i know that .the probleme is if i can flash the rom without sd card or not ?
you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.
samsamuel said:
you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.
Click to expand...
Click to collapse
Ok Now i have this erreur when formating my sd card
Code:
formating /data.......
formating /cache.......
formating /sd-ext......
[COLOR="Red"][B]no app2sd partition found .skipping format of /sd-ect.[/B][/COLOR]
formatting /sdcard/andoid_secure.............
[COLOR="Red"][B]Error mounting /sdcard/android_secure![/B][/COLOR]
Cos you haven't created an ext partition yet?
samsamuel said:
Cos you haven't created an ext partition yet?
Click to expand...
Click to collapse
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy
magic phone said:
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy
Click to expand...
Click to collapse
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.
Nigeldg said:
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.
Click to expand...
Click to collapse
If you have nothing nice to say, don't say anything at all, i think is better to ask google to ask some new mombre hiere. because your solution dont work and if a choose 1024mb partition i cant format my sd card and i cant copie the rom inside
but with 512M partition all work but phone reboot affter update .thanks to all
and big thanks to samsameul
Hi
I recently installed a Sense 3.x ROM from the Sensation XL Android 2.3.5 and I got only 9MB of free space. I have an initrd-patcher for ICS and JB, but I doubt that it will work on older versions of android.
Is there a way to make android 2.3.5 use the EXT4 partition on the SD-card?
Yes, you have to flash an a2sd or DataOnExt script after first boot/flashing the rom immediately. Of course, while having an ext partition created beforehand.
Marvlesz said:
Yes, you have to flash an a2sd or DataOnExt script after first boot/flashing the rom immediately. Of course, while having an ext partition created beforehand.
Click to expand...
Click to collapse
Thanks for the reply. Can you recommend a good script for doing this?
I'd suggest this one, but there's a whole lot of other ones. So if this one doesn't work well or you don't like it, don't come here asking for another one. Instead, go out there and look for the one that you like.
Marvlesz said:
I'd suggest this one, but there's a whole lot of other ones. So if this one doesn't work well or you don't like it, don't come here asking for another one. Instead, go out there and look for the one that you like.
Click to expand...
Click to collapse
and just a little clue to help out a little bit
its in the second post of the thread that Marvlesz link to
I used initrd_patcher_v2 on Gingerbread 2.3.7 and it's worked fine. So it should work on GB 2.3.5 as well. Remember to make an EXT4 partition on your SD before any installation, via recovery, and remove any script like a2sd from zip ROM.
eclyptos said:
I used initrd_patcher_v2 on Gingerbread 2.3.7 and it's worked fine. So it should work on GB 2.3.5 as well. Remember to make an EXT4 partition on your SD before any installation, via recovery, and remove any script like a2sd from zip ROM.
Click to expand...
Click to collapse
I tried to search for initrd_patcher_v2 and found this one: http://forum.xda-developers.com/showthread.php?p=36049396
I tried running it on my system, but freezes up just before boot-animation.
I use the SENSATION XL ROM V 3.0 STOCK from here: http://forum.xda-developers.com/showthread.php?t=1316632&highlight=sensation+all+in+one
I can't seem to find any a2sd-scripts in the ROM zip, but there's a sd-ext folder inside the ZIP.
CTSRP said:
I tried to search for initrd_patcher_v2 and found this one: http://forum.xda-developers.com/showthread.php?p=36049396
I tried running it on my system, but freezes up just before boot-animation.
I use the SENSATION XL ROM V 3.0 STOCK from here: http://forum.xda-developers.com/showthread.php?t=1316632&highlight=sensation+all+in+one
I can't seem to find any a2sd-scripts in the ROM zip, but there's a sd-ext folder inside the ZIP.
Click to expand...
Click to collapse
Can you do a fresh installation again of this ROM or you try to keep all you data which you using right now?
Sv: Enabling storage of EXT4 on SD-card
I tried from a fresh install, before booting the first time, and also from an aleady configured installation.
CTSRP said:
I tried from a fresh install, before booting the first time, and also from an aleady configured installation.
Click to expand...
Click to collapse
You don't understand, I mean can you format you phone and install this rom again with my advices?
Did you made an EXT4 partition of 1GB or more, with Mini Tool (free), on your sd BEFORE fresh installation of this ROM?
I checked your ROM and the script (apps2sd) is already in that ROM so you probably make a wrong Installation.
Sv: Enabling storage of EXT4 on SD-card
I do understand what you say. I made a task29, clk repartition and recovery from hd2toolkit. Under installation the installer asks if I have 1024mb us model or 512mb EU version. I selected the EU version, as this is the one I have. The only question it asks me is if I have magldr or clk.
After that it returns to clk recovery and I press reboot now. I have created the ext4 partition before I even tried installing android the very first time.
If you want, I can perform a new installation with a video recording to document the process
CTSRP said:
I do understand what you say. I made a task29, clk repartition and recovery from hd2toolkit. Under installation the installer asks if I have 1024mb us model or 512mb EU version. I selected the EU version, as this is the one I have. The only question it asks me is if I have magldr or clk.
After that it returns to clk recovery and I press reboot now. I have created the ext4 partition before I even tried installing android the very first time.
If you want, I can perform a new installation with a video recording to document the process
Click to expand...
Click to collapse
Do not use CLK or HD2toolkit this time.
I will recommend to do in this way, before touch your phone format your SD with GUIFORMAT (look here on XDA for it) in FAT32 normal mode (no quick), after format the SD use Mini Tool and make a ext4 partition of 2gb (2048mb) at the end of the SD, so when you look at the partition the ext partition have to be at the right side of you. Put inside the SD the zip of Sensation XL 3.0 only, do not do anything else with your sd.
Format your Phone with Task29, reboot in Bootloader,
Flash MAGLDR 1.13 for HD2,
From MAGLDR 1.13 via USB Flasher flash the Recovery Touch Beta 8, (I provided you the Recovery ready for you, unzip and flash)
Reboot in MAGLDR,
put the SD into the Phone,
run Recovery,
Do a wipe data and wipe cache partition and wipe dalvick cache,
Install from sd the zip via recovery,
In Aroma do not select any option if you don't know anything about it, the installation will recognize the EXT4 partition automatically and you ready to GO, GO, GO.
Let me know.
Hi,
I am currently using Rom from tyween: http://forum.xda-developers.com/showthread.php?t=933951 and I would like to install a new one from Tytung http://forum.xda-developers.com/showthread.php?t=2224469 .
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
peter.l said:
Hi,
My questions:
1. in description of tytungs Rom is stated that NAND version is for USA T-mobile so I assume that with my international version I have to use the other two versions and if so then the only way to install it is using aurora installer?
Click to expand...
Click to collapse
Nand is divided into two: 1- Pure Nand (EVERYTHING is on the NAND of the device) and 2- Nand with DataOnExt (as the name implies, some of the data will be stored on an EXT partition on your SD card).
Since the international version of the HD2 only has about half a gig of storage, if you fit everything into the NAND you won't have enough space left for you to install apps and whatnot. If you want it on NAND, you need to choose the second option (some data on the sdcard), but you need to make sure you have an EXT partition on your sd card first (if you don't know how to make one, search).
And "aurora" (you mean aroma*) is just a path, it IS like you said THE installer. It's got nothing to do with your installation. It is just a fancy make-up for the old installation method. Yes, you'll have to use it.
peter.l said:
2. Nevertheless I tried NAND version installed it using CWM but then it got stuck on loading screen, could this problem be solved by this patch? http://forum.xda-developers.com/showpost.php?p=40623956&postcount=821
Click to expand...
Click to collapse
No, that patch is for something else. Your problem is different.
If you mean:
1- NAND Only, then you may have not made enough partition space for the system. (Either way, you shouldn't use this one, use NAND WITH dataonext).
but if you mean 1- NAND with DataOnExt, then it is either your partition size is too small or you do not have a proper sdcard ext partition.
peter.l said:
3. Is it possible to use Rom Manager to install this Rom? I have only tried CWM method and this one seems also really easy to use.
Thank you for your answers!!!
Click to expand...
Click to collapse
It's the same thing. When you select "Install ROM" in ROM Manager, it will actually reboot your device into CWM and you will have to follow the steps of Aroma as well. Yes, you can use it if you have cLK bootloader and not magldr.
You are welcome
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
peter.l said:
According to your answer, I have to download AROMA installer and use it for installing new Rom. In DataOnExt version will 1 Gb partition be enough?
Click to expand...
Click to collapse
No, Aroma is *included* in the .zip file of the ROM. Just download the ROM, flash from recovery normally but instead of the usual text of procedure, you'll see a fancy screen where you get to configure the ROM before it is installed.
In my opinion, yes, 1GB is more than enough.
recover
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
exlord1 said:
Hi.i can not enter to recovery in this rom.Can someone help me.I installed by cwn
Click to expand...
Click to collapse
CWM is independent from the ROM you install.
If you are talking about "boot into recovery" from within the ROM, that's a rom's feature and does not have to be included in it. You can reach the recovery by rebooting your phone into MAGLDR and then choosing the option AD. Recovery or something like that.
Just to add a little to Marvlesz's answer, reboot into recovery/bootloader on any ROM will just reboot the phone normally if you have MAGLDR. To access CWM just hold power for the MAGLDR menu then select 8. AD Recovery. If you use cLK on the other hand, reboot into recovery does work if I'm not mistaken.
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
It could literally be ANYTHING. Follow this guide:
http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
and I think you'll be good, please read everything there.
peter.l said:
I tried to install this ROM using various settings (DataOnExt / Native SD, wipe/no wipe, magldr / ppp...) but phone always ends up rebooting itself after htc loading screen. I did partition SD card to FAT 32 (primary) and 1GB EXT4 (primary).
What could be the problem and how to solve it?
Thank you!
Click to expand...
Click to collapse
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Nigeldg said:
What /system partition size did you use? Make sure it's big enough for the ROM you're trying to flash.
Click to expand...
Click to collapse
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
peter.l said:
EXT4 = 1GB. I partitioned SD card with Mini Tool Partition Wizard, then copied Zip on SD card, wiped data (factory reset + dalvik) installed ROM. To me it feels like I did everything according to instructions...
Click to expand...
Click to collapse
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Nigeldg said:
No, not your SD EXT partition, the partition you flashed when flashing CWM.
Click to expand...
Click to collapse
I have 150 mb. So for this ROM should I use 250 or 400?
peter.l said:
I have 150 mb. So for this ROM should I use 250 or 400?
Click to expand...
Click to collapse
285. To create that, go to wherever your CWM thing is stored on your PC, open the CWM folder, open the file flash.cfg (not flash.cfg.txt.) in notepad (it should open in this way automatically) then change the value next to the line beginning 'SYSTEM...' from 150 to 285, keeping everything else exactly the same.
hi all,
so i've been trying this out for two days and no luck also i've searched for it on the forums
so what i've done so far:
-installed 2.08.HSPL
-the 2.15.50.14 radio
-installed MAGLDR
-flashed CMW with a partition with 200 system 5 cache
flashed the rom via zip installation
and it rebootes and just freezes on the green htc logo on the black background for over an hour and i did a task 29 wipe and stated allover again but with no luck... what am i missing here ?
also how do i prepare my sd so i can install data on ex for that rom ? like from the beggingin what should i do?
and have i mentioned im a noob
Are you sure you're doing NAND install? Or NAND with data on EXT? Cause if you're not having EXT partition on SD card - it's not gonna work for sure (explains why you're stuck on loading screen I guess)
"flashed the rom via zip installation" - make sure you're using correct type of install, out of ideas if you're doing it with NAND (ONLY) option.
well i am sure im installing on NAND because i chose it from the AROMA installer..
say i will flash it on NAND with data on EXT for a change , can you direct me to the right steps for partitioning the sd ?
because all the guides i saw here for prepairing the sd were applicable after i install the rom on NAND ...
The easiest way is to backup your sdcard first, because this will wipe it completely. Go into recovery, then advanced and finally choose partition sd card. I suggest choosing 1024MB, and 0 swap. It will take a while, then return your stuff back into the card and try installing the ROM again.
Or, you can use a desktop software to partition it (use google).
thanks for replying ..
so i partitioned my sd and installed the rom on NAND with data on EXT and my phone still stops at the green htc on black logo
what am i missing here ? has this ever occurred before ?
Are you sure you're using wipe option before installing a new rom? (Task29 @ HTC HD2 ToolKit) cause if you're doing it without any wipeout of your phone memory it won't work either, if it's not that, then I'm out of ideas.
However, Ill make a step-step guide, atleast one which I do before flashing new rom.
#1 wipe, Task29
#2 repartition for the system memory etc, I choose 200mb for system (need some space for additional mods xd)
#3 Install MAGLDR
#4 I don't repartition my SD everytime (moving 30gbs out of it is a pain tbh), but find repartitioning of SD card in Recovery, repartition it to EXT4 format
#5 move your rom .zip to sd card after the SD card is partitioned
#6 install the ROM through CWM, should work after that, make sure that you ALREADY have SD CARD PARTITIONED if you're using NAND+DATA on EXT option, cause otherwise it won't work
I always do it this way and it works, correct me if I missed something there cause I'm already doing it without thinking.
Look my signature and mark your bad blocks for once. After that try to flash rom again with bigger system partition.
Sent from my HD2 using xda app-developers app
OK , I've solved the problem .. i flashed cLK and everything went great ..
i guess something's wrong with MAGLDR and my phone .. thanks everyone for replying
i have problem
i have htc hd2, 2.08.HSPL, Leo_RADIO_2.15.50.14, MAGLDR v1.13 and ClockworkMod Recovery 5.0.2.6
i instal this rom androidforum.tytung.com/nexushd2-jellybean-cm10-2-t78.html on nand, everything is sucesfull. When i restat device it stuck on boot screen, that hapend with any rom which i instal on nand. i have 2gb sd card and system partition 400m, what i'm doing wrong.
i have one rom that i copy files on sd card an run ad as and works perfect, but wifi wont work. what to to to instal this rom correctly that shuold work, please help
domix5000 said:
... i have 2gb sd card and system partition 400m ...
Click to expand...
Click to collapse
That is what you're doing wrong. Do you have an ext partition on your sd card? If you don't, create one. And reduce that 400 to 300mb. (I am assuming you want to install via DataOnExt.)
Marvlesz said:
That is what you're doing wrong. Do you have an ext partition on your sd card? If you don't, create one. And reduce that 400 to 300mb. (I am assuming you want to install via DataOnExt.)
Click to expand...
Click to collapse
yes i want it istal like you say, than i must to reduce to 300m , how i create ext4 partiton and how large must it be
How big is something you decide (I suggest 1.5GB), how to create: just google "how to create ext4 partition android"